/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */

#include <arch/io.h>
#include <device/mmio.h>
#include <device/pci_ops.h>
#include <bootstate.h>
#include <console/console.h>
#include <console/post_codes.h>
#include <cpu/x86/mp.h>
#include <cpu/x86/smm.h>
#include <device/pci.h>
#include <intelblocks/cpulib.h>
#include <intelblocks/lpc_lib.h>
#include <intelblocks/p2sb.h>
#include <intelblocks/pcr.h>
#include <intelblocks/tco.h>
#include <intelblocks/thermal.h>
#include <reg_script.h>
#include <spi-generic.h>
#include <soc/me.h>
#include <soc/p2sb.h>
#include <soc/pci_devs.h>
#include <soc/pcr_ids.h>
#include <soc/pm.h>
#include <soc/smbus.h>
#include <soc/systemagent.h>
#include <timer.h>

#include "chip.h"

#define PSF_BASE_ADDRESS	0xA00
#define PCR_PSFX_T0_SHDW_PCIEN	0x1C
#define PCR_PSFX_T0_SHDW_PCIEN_FUNDIS	(1 << 8)

static void pch_disable_heci(void)
{
	/* unhide p2sb device */
	p2sb_unhide();

	/* disable heci */
	pcr_or32(PID_PSF1, PSF_BASE_ADDRESS + PCR_PSFX_T0_SHDW_PCIEN,
		PCR_PSFX_T0_SHDW_PCIEN_FUNDIS);

	p2sb_disable_sideband_access();
}

static void pch_finalize_script(struct device *dev)
{
	uint32_t reg32;
	uint8_t *pmcbase;
	config_t *config;
	u8 reg8;

	tco_lockdown();

	/* Display me status before we hide it */
	intel_me_status();

	pmcbase = pmc_mmio_regs();
	config = config_of(dev);

	/*
	 * Set low maximum temp value used for dynamic thermal sensor
	 * shutdown consideration.
	 *
	 * If Dynamic Thermal Shutdown is enabled then PMC logic shuts down the
	 * thermal sensor when CPU is in a C-state and DTS Temp <= LTT.
	 */
	pch_thermal_configuration();

	/*
	 * Disable ACPI PM timer based on dt policy
	 *
	 * Disabling ACPI PM timer is necessary for XTAL OSC shutdown.
	 * Disabling ACPI PM timer also switches off TCO
	 */

	if (config->PmTimerDisabled) {
		reg8 = read8(pmcbase + PCH_PWRM_ACPI_TMR_CTL);
		reg8 |= (1 << 1);
		write8(pmcbase + PCH_PWRM_ACPI_TMR_CTL, reg8);
	}

	/* Disable XTAL shutdown qualification for low power idle. */
	if (config->s0ix_enable) {
		reg32 = read32(pmcbase + CIR31C);
		reg32 |= XTALSDQDIS;
		write32(pmcbase + CIR31C, reg32);
	}

	/* we should disable Heci1 based on the devicetree policy */
	if (config->HeciEnabled == 0)
		pch_disable_heci();

	/* Hide p2sb device as the OS must not change BAR0. */
	p2sb_hide();
}

static void soc_lockdown(struct device *dev)
{
	struct soc_intel_skylake_config *config;
	u8 reg8;

	config = config_of(dev);

	/* Global SMI Lock */
	if (config->LockDownConfigGlobalSmi == 0) {
		reg8 = pci_read_config8(dev, GEN_PMCON_A);
		reg8 |= SMI_LOCK;
		pci_write_config8(dev, GEN_PMCON_A, reg8);
	}

	/* Lock chipset memory registers to protect SMM */
	mp_run_on_all_cpus(cpu_lt_lock_memory, NULL);
}

static void soc_finalize(void *unused)
{
	struct device *dev;

	dev = PCH_DEV_PMC;

	/* Check if PMC is enabled, else return */
	if (dev == NULL)
		return;

	printk(BIOS_DEBUG, "Finalizing chipset.\n");

	pch_finalize_script(dev);

	soc_lockdown(dev);

	printk(BIOS_DEBUG, "Finalizing SMM.\n");
	outb(APM_CNT_FINALIZE, APM_CNT);

	/* Indicate finalize step with post code */
	post_code(POST_OS_BOOT);
}

BOOT_STATE_INIT_ENTRY(BS_OS_RESUME, BS_ON_ENTRY, soc_finalize, NULL);
BOOT_STATE_INIT_ENTRY(BS_PAYLOAD_LOAD, BS_ON_EXIT, soc_finalize, NULL);