/* * This file is part of the coreboot project. * * Copyright 2014 Google Inc. * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; version 2 of the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #define PMC_REGS (void *)(uintptr_t)(TEGRA_PMC_BASE) static void enable_cpu_clocks(void) { clock_enable(CLK_ENB_CPU, 0, 0, SET_CLK_ENB_CPUG_ENABLE | SET_CLK_ENB_CPULP_ENABLE, 0, 0, 0); } static void enable_cpu_power_partitions(void) { /* Bring up fast cluster, non-CPU, CPU0, CPU1, CPU2 and CPU3 parts. */ power_ungate_partition(POWER_PARTID_CRAIL); power_ungate_partition(POWER_PARTID_C0NC); power_ungate_partition(POWER_PARTID_CE0); if (IS_ENABLED(CONFIG_ARM64_USE_SECURE_MONITOR)) { power_ungate_partition(POWER_PARTID_CE1); power_ungate_partition(POWER_PARTID_CE2); power_ungate_partition(POWER_PARTID_CE3); } if (IS_ENABLED(CONFIG_ARM64_USE_ARM_TRUSTED_FIRMWARE)) { /* * Deassert reset signal of all the secondary CPUs. * PMC and flow controller will take over the power sequence * controller in the ATF. */ uint32_t reg = CRC_RST_CPUG_CLR_CPU1 | CRC_RST_CPUG_CLR_DBG1 | CRC_RST_CPUG_CLR_CORE1 | CRC_RST_CPUG_CLR_CX1 | CRC_RST_CPUG_CLR_CPU2 | CRC_RST_CPUG_CLR_DBG2 | CRC_RST_CPUG_CLR_CORE2 | CRC_RST_CPUG_CLR_CX2 | CRC_RST_CPUG_CLR_CPU3 | CRC_RST_CPUG_CLR_DBG3 | CRC_RST_CPUG_CLR_CORE3 | CRC_RST_CPUG_CLR_CX3; write32(CLK_RST_REG(rst_cpug_cmplx_clr), reg); } } static void request_ram_repair(void) { struct flow_ctlr * const flow = (void *)(uintptr_t)TEGRA_FLOW_BASE; const uint32_t req = 1 << 0; const uint32_t sts = 1 << 1; uint32_t reg; struct stopwatch sw; printk(BIOS_DEBUG, "Requesting RAM repair.\n"); stopwatch_init(&sw); /* Perform ram repair */ reg = read32(&flow->ram_repair); reg |= req; write32(&flow->ram_repair, reg); while ((read32(&flow->ram_repair) & sts) != sts) ; printk(BIOS_DEBUG, "RAM repair complete in %ld usecs.\n", stopwatch_duration_usecs(&sw)); } void ccplex_cpu_prepare(void) { enable_cpu_clocks(); enable_cpu_power_partitions(); mainboard_configure_pmc(); mainboard_enable_vdd_cpu(); request_ram_repair(); } static void start_common_clocks(void) { /* Clear fast CPU partition reset. */ write32(CLK_RST_REG(rst_cpug_cmplx_clr), CRC_RST_CPUG_CLR_NONCPU); /* Clear reset of L2 and CoreSight components. */ write32(CLK_RST_REG(rst_cpug_cmplx_clr), CRC_RST_CPUG_CLR_L2 | CRC_RST_CPUG_CLR_PDBG); } void ccplex_cpu_start(void *entry_addr) { /* Enable common clocks for the shared resources between the cores. */ start_common_clocks(); start_cpu(0, entry_addr); }