# This file is part of the coreboot project.
# SPDX-License-Identifier: GPL-2.0-only

config SOUTHBRIDGE_AMD_AGESA_HUDSON
	bool

config SOUTHBRIDGE_AMD_AGESA_YANGTZE
	bool

if SOUTHBRIDGE_AMD_AGESA_HUDSON || SOUTHBRIDGE_AMD_AGESA_YANGTZE

config SOUTHBRIDGE_SPECIFIC_OPTIONS # dummy
	def_bool y
	select IOAPIC
	select HAVE_USBDEBUG_OPTIONS
	select HAVE_CF9_RESET
	select HAVE_CF9_RESET_PREPARE
	select SOC_AMD_COMMON
	select SOC_AMD_COMMON_BLOCK
	select SOC_AMD_COMMON_BLOCK_ACPIMMIO

config EHCI_BAR
	hex
	default 0xfef00000

config HUDSON_XHCI_ENABLE
	bool "Enable Hudson XHCI Controller"
	default y if HUDSON_XHCI_FWM
	help
	  The XHCI controller must be enabled and the XHCI firmware
	  must be added in order to have USB 3.0 support configured
	  by coreboot. The OS will be responsible for enabling the XHCI
	  controller if the XHCI firmware is available but the
	  XHCI controller is not enabled by coreboot.

config HUDSON_XHCI_FWM
	bool "Add xhci firmware"
	default y if USE_BLOBS
	help
	  Add Hudson 2/3/4 XHCI Firmware to support the onboard USB 3.0

config HUDSON_IMC_ENABLE
	bool
	default n

config HUDSON_IMC_FWM
	bool "Add IMC firmware"
	depends on HUDSON_IMC_ENABLE
	default y if USE_BLOBS
	select SPI_FLASH_HAS_VOLATILE_GROUP if SPI_FLASH
	help
	  Add Hudson 2/3/4 IMC Firmware to support the onboard fan control

config HUDSON_GEC_FWM
	bool
	default n
	help
	  Add Hudson 2/3/4 GEC Firmware to support the onboard gigabit Ethernet MAC.
	  Must be connected to a Broadcom B50610 or B50610M PHY on the motherboard.

config HUDSON_XHCI_FWM_FILE
	string "XHCI firmware path and filename"
	default "3rdparty/blobs/southbridge/amd/hudson/xhci.bin" if SOUTHBRIDGE_AMD_AGESA_HUDSON
	default "3rdparty/blobs/southbridge/amd/yangtze/xhci.bin" if SOUTHBRIDGE_AMD_AGESA_YANGTZE
	depends on HUDSON_XHCI_FWM

config HUDSON_IMC_FWM_FILE
	string "IMC firmware path and filename"
	default "3rdparty/blobs/southbridge/amd/hudson/imc.bin" if SOUTHBRIDGE_AMD_AGESA_HUDSON
	default "3rdparty/blobs/southbridge/amd/yangtze/imc.bin" if SOUTHBRIDGE_AMD_AGESA_YANGTZE
	depends on HUDSON_IMC_FWM

config HUDSON_GEC_FWM_FILE
	string "GEC firmware path and filename"
	default "3rdparty/blobs/southbridge/amd/hudson/gec.bin"  if SOUTHBRIDGE_AMD_AGESA_HUDSON
	default "3rdparty/blobs/southbridge/amd/yangtze/gec.bin"  if SOUTHBRIDGE_AMD_AGESA_YANGTZE
	depends on HUDSON_GEC_FWM

config HUDSON_SATA_MODE
	int "SATA Mode"
	default 2
	range 0 6
	help
	  Select the mode in which SATA should be driven. NATIVE AHCI, or RAID.
	  The default is NATIVE.
	  0: NATIVE mode does not require a ROM.
	  1: RAID mode must have the two ROM files.
	  2: AHCI may work with or without AHCI ROM. It depends on the payload support.
	     For example, seabios does not require the AHCI ROM.
	  3: LEGACY IDE
	  4: IDE to AHCI
	  5: AHCI7804: ROM Required, and AMD driver required in the OS.
	  6: IDE to AHCI7804: ROM Required, and AMD driver required in the OS.

comment "NATIVE"
	depends on HUDSON_SATA_MODE = 0

comment "RAID"
	depends on HUDSON_SATA_MODE = 1

comment "AHCI"
	depends on HUDSON_SATA_MODE = 2

comment "LEGACY IDE"
	depends on HUDSON_SATA_MODE = 3

comment "IDE to AHCI"
	depends on HUDSON_SATA_MODE = 4

comment "AHCI7804"
	depends on HUDSON_SATA_MODE = 5

comment "IDE to AHCI7804"
	depends on HUDSON_SATA_MODE = 6

if HUDSON_SATA_MODE = 2 || HUDSON_SATA_MODE = 5

config AHCI_ROM_ID
	string  "AHCI device PCI IDs"
	default "1022,7801" if HUDSON_SATA_MODE = 2
	default "1022,7804" if HUDSON_SATA_MODE = 5

config HUDSON_AHCI_ROM
	bool "Add a AHCI ROM"

config AHCI_ROM_FILE
	string "AHCI ROM path and filename"
	depends on HUDSON_AHCI_ROM
	default "src/southbridge/amd/agesa/hudson/ahci.bin"

endif

if HUDSON_SATA_MODE = 1

config RAID_ROM_ID
	string "RAID device PCI IDs"
	default "1022,7802"
	help
	  1022,7802 for SATA NON-RAID5 module, 1022,7803 for SATA RAID5 mode

config RAID_ROM_FILE
	string "RAID ROM path and filename"
	default "src/southbridge/amd/agesa/hudson/raid.bin"

config RAID_MISC_ROM_FILE
	string "RAID Misc ROM path and filename"
	default "src/southbridge/amd/agesa/hudson/misc.bin"

config RAID_MISC_ROM_POSITION
	hex "RAID Misc ROM Position"
	default 0xFFF00000
	help
	  The RAID ROM requires that the MISC ROM is located between the range
	  0xFFF0_0000 to 0xFFF0_FFFF. Also, it must 1K bytes aligned.
	  The CONFIG_ROM_SIZE must be larger than 0x100000.

endif

config HUDSON_LEGACY_FREE
	bool "System is legacy free"
	help
	  Select y if there is no keyboard controller in the system.
	  This sets variables in AGESA and ACPI.

config ACPI_ENABLE_THERMAL_ZONE
	bool
	default y

endif # SOUTHBRIDGE_AMD_AGESA_HUDSON || SOUTHBRIDGE_AMD_AGESA_YANGTZE

if SOUTHBRIDGE_AMD_AGESA_YANGTZE
	config AZ_PIN
		hex
		default 0xaa
		help
		  bit 1,0 - pin 0
		  bit 3,2 - pin 1
		  bit 5,4 - pin 2
		  bit 7,6 - pin 3
endif