/* SPDX-License-Identifier: GPL-2.0-only */
/* This file is part of the coreboot project. */

#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <device/pci_def.h>
#include <device/pci_ops.h>
#include <device/pci_ids.h>
#include "pch.h"

static void pci_init(struct device *dev)
{
	u16 reg16;
	u8 reg8;

	printk(BIOS_DEBUG, "PCI init.\n");
	/* Enable Bus Master */
	reg16 = pci_read_config16(dev, PCI_COMMAND);
	reg16 |= PCI_COMMAND_MASTER;
	pci_write_config16(dev, PCI_COMMAND, reg16);

	/* This device has no interrupt */
	pci_write_config8(dev, INTR, 0xff);

	/* disable parity error response and SERR */
	reg16 = pci_read_config16(dev, PCI_BRIDGE_CONTROL);
	reg16 &= ~PCI_BRIDGE_CTL_PARITY;
	reg16 &= ~PCI_BRIDGE_CTL_SERR;
	pci_write_config16(dev, PCI_BRIDGE_CONTROL, reg16);

	/* Master Latency Count must be set to 0x04! */
	reg8 = pci_read_config8(dev, SMLT);
	reg8 &= 0x07;
	reg8 |= (0x04 << 3);
	pci_write_config8(dev, SMLT, reg8);

	/* Clear errors in status registers */
	reg16 = pci_read_config16(dev, PSTS);
	//reg16 |= 0xf900;
	pci_write_config16(dev, PSTS, reg16);

	reg16 = pci_read_config16(dev, SECSTS);
	// reg16 |= 0xf900;
	pci_write_config16(dev, SECSTS, reg16);
}

static struct pci_operations pci_ops = {
	.set_subsystem = pci_dev_set_subsystem,
};

static struct device_operations device_ops = {
	.read_resources		= pci_bus_read_resources,
	.set_resources		= pci_dev_set_resources,
	.enable_resources	= pci_bus_enable_resources,
	.init			= pci_init,
	.scan_bus		= pci_scan_bridge,
	.ops_pci		= &pci_ops,
};

static const struct pci_driver pch_pci __pci_driver = {
	.ops	= &device_ops,
	.vendor	= PCI_VENDOR_ID_INTEL,
	.device	= 0x2448,
};