/* * This file is part of the coreboot project. * * Copyright (C) 2008-2009 coresystems GmbH * Copyright (C) 2016 Damien Zammit * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; version 2 of * the License. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. */ #include #include #include #include #include "i82801gx.h" #include "sata.h" typedef struct southbridge_intel_i82801gx_config config_t; static u8 get_ich7_sata_ports(void) { struct device *lpc; lpc = dev_find_slot(0, PCI_DEVFN(31, 0)); switch (pci_read_config16(lpc, PCI_DEVICE_ID)) { case 0x27b0: case 0x27b8: return 0xf; case 0x27b9: case 0x27bd: return 0x5; case 0x27bc: return 0x3; default: printk(BIOS_ERR, "i82801gx_sata: error: cannot determine port config\n"); return 0; } } void sata_enable(struct device *dev) { /* Get the chip configuration */ config_t *config = dev->chip_info; if (config->sata_ahci) { /* Set map to ahci */ pci_write_config8(dev, SATA_MAP, (pci_read_config8(dev, SATA_MAP) & ~0xc3) | 0x40); } else { /* Set map to ide */ pci_write_config8(dev, SATA_MAP, pci_read_config8(dev, SATA_MAP) & ~0xc3); } /* At this point, the new pci id will appear on the bus */ } static void sata_init(struct device *dev) { u32 reg32; u16 reg16; u32 *ahci_bar; u8 ports; /* Get the chip configuration */ config_t *config = dev->chip_info; printk(BIOS_DEBUG, "i82801gx_sata: initializing...\n"); if (config == NULL) { printk(BIOS_ERR, "i82801gx_sata: error: device not in devicetree.cb!\n"); return; } /* Get ICH7 SATA port config */ ports = get_ich7_sata_ports(); /* Enable BARs */ pci_write_config16(dev, PCI_COMMAND, 0x0007); if (config->ide_legacy_combined) { printk(BIOS_DEBUG, "SATA controller in combined mode.\n"); /* No AHCI: clear AHCI base */ pci_write_config32(dev, 0x24, 0x00000000); /* And without AHCI BAR no memory decoding */ reg16 = pci_read_config16(dev, PCI_COMMAND); reg16 &= ~PCI_COMMAND_MEMORY; pci_write_config16(dev, PCI_COMMAND, reg16); pci_write_config8(dev, 0x09, 0x80); /* Set timings */ pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE | IDE_ISP_5_CLOCKS | IDE_RCT_4_CLOCKS); pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE | IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | IDE_PPE0 | IDE_IE0 | IDE_TIME0); /* Sync DMA */ pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0); pci_write_config16(dev, IDE_SDMA_TIM, 0x0200); /* Set IDE I/O Configuration */ reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0; pci_write_config32(dev, IDE_CONFIG, reg32); /* Combine IDE - SATA configuration */ pci_write_config8(dev, SATA_MAP, 0x02); /* Port 0 & 1 enable */ pci_write_config8(dev, SATA_PCS, 0x0f); } else if(config->sata_ahci) { printk(BIOS_DEBUG, "SATA controller in AHCI mode.\n"); /* Allow both Legacy and Native mode */ pci_write_config8(dev, 0x09, 0x8f); /* Set Interrupt Line */ /* Interrupt Pin is set by D31IP.PIP */ pci_write_config8(dev, INTR_LN, 0x0a); /* In ACHI mode, bit[3:0] must always be set * (Port status is controlled through AHCI BAR) * Different settings for different controller models. */ pci_write_config8(dev, SATA_PCS, ports); ahci_bar = (u32 *)(pci_read_config32(dev, 0x27) & ~0x3ff); ahci_bar[3] = config->sata_ports_implemented; } else { printk(BIOS_DEBUG, "SATA controller in plain mode.\n"); /* Set Sata Controller Mode. No Mapping(?) */ pci_write_config8(dev, SATA_MAP, 0x00); /* No AHCI: clear AHCI base */ pci_write_config32(dev, 0x24, 0x00000000); /* And without AHCI BAR no memory decoding */ reg16 = pci_read_config16(dev, PCI_COMMAND); reg16 &= ~PCI_COMMAND_MEMORY; pci_write_config16(dev, PCI_COMMAND, reg16); /* Native mode capable on both primary and secondary (0xa) * or'ed with enabled (0x50) = 0xf */ pci_write_config8(dev, 0x09, 0x8f); /* Set Interrupt Line */ /* Interrupt Pin is set by D31IP.PIP */ pci_write_config8(dev, INTR_LN, 0xff); /* Set timings */ pci_write_config16(dev, IDE_TIM_PRI, IDE_DECODE_ENABLE | IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | IDE_PPE0 | IDE_IE0 | IDE_TIME0); pci_write_config16(dev, IDE_TIM_SEC, IDE_DECODE_ENABLE | IDE_SITRE | IDE_ISP_3_CLOCKS | IDE_RCT_1_CLOCKS | IDE_IE0 | IDE_TIME0); /* Sync DMA */ pci_write_config16(dev, IDE_SDMA_CNT, IDE_SSDE0 | IDE_PSDE0); pci_write_config16(dev, IDE_SDMA_TIM, 0x0201); /* Set IDE I/O Configuration */ reg32 = SIG_MODE_PRI_NORMAL | FAST_PCB1 | FAST_PCB0 | PCB1 | PCB0; pci_write_config32(dev, IDE_CONFIG, reg32); /* Port 0 & 1 enable XXX */ pci_write_config8(dev, SATA_PCS, 0x15); } /* Enable clock gating for unused ports and set initialization reg */ pci_write_config32(dev, SATA_IR, SIF3(ports) | SIF2 | SIF1 | SCRE); /* All configurations need this SATA initialization sequence */ pci_write_config8(dev, 0xa0, 0x40); pci_write_config8(dev, 0xa6, 0x22); pci_write_config8(dev, 0xa0, 0x78); pci_write_config8(dev, 0xa6, 0x22); pci_write_config8(dev, 0xa0, 0x88); reg32 = pci_read_config32(dev, 0xa4); reg32 &= 0xc0c0c0c0; reg32 |= 0x1b1b1212; pci_write_config32(dev, 0xa4, reg32); pci_write_config8(dev, 0xa0, 0x8c); reg32 = pci_read_config32(dev, 0xa4); reg32 &= 0xc0c0ff00; reg32 |= 0x121200aa; pci_write_config32(dev, 0xa4, reg32); pci_write_config8(dev, 0xa0, 0x00); pci_write_config8(dev, PCI_INTERRUPT_LINE, 0); /* Sata Initialization Register */ reg32 = pci_read_config32(dev, SATA_IR); reg32 |= SCRD; // due to some bug pci_write_config32(dev, SATA_IR, reg32); } static void sata_set_subsystem(device_t dev, unsigned vendor, unsigned device) { if (!vendor || !device) { pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, pci_read_config32(dev, PCI_VENDOR_ID)); } else { pci_write_config32(dev, PCI_SUBSYSTEM_VENDOR_ID, ((device & 0xffff) << 16) | (vendor & 0xffff)); } } static struct pci_operations sata_pci_ops = { .set_subsystem = sata_set_subsystem, }; static struct device_operations sata_ops = { .read_resources = pci_dev_read_resources, .set_resources = pci_dev_set_resources, .enable_resources = pci_dev_enable_resources, .init = sata_init, .scan_bus = 0, .enable = i82801gx_enable, .ops_pci = &sata_pci_ops, }; static const unsigned short sata_ids[] = { 0x27c0, /* Desktop Non-AHCI and Non-RAID Mode: 82801GB/GR/GDH (ICH7/ICH7R/ICH7DH) */ 0x27c1, /* Desktop AHCI Mode: 82801GB/GR/GDH (ICH7/ICH7R/ICH7DH) */ 0x27c4, /* Mobile Non-AHCI and Non-RAID Mode: 82801GBM/GHM (ICH7-M/ICH7-M DH) */ 0x27c5, /* Mobile AHCI Mode: 82801GBM/GHM (ICH7-M/ICH7-M DH) */ /* NOTE: Any of the below are not properly supported yet. */ 0x27c3, /* Desktop RAID mode: 82801GB/GR/GDH (ICH7/ICH7R/ICH7DH) */ 0x27c6, /* ICH7M DH Raid Mode: 82801GHM (ICH7-M DH) */ 0 }; static const struct pci_driver i82801gx_sata_driver __pci_driver = { .ops = &sata_ops, .vendor = PCI_VENDOR_ID_INTEL, .devices= sata_ids, };