/** @file
Copyright (c) 2018, Intel Corporation. All rights reserved.
Redistribution and use in source and binary forms, with or without modification,
are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice, this
list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice, this
list of conditions and the following disclaimer in the documentation and/or
other materials provided with the distribution.
* Neither the name of Intel Corporation nor the names of its contributors may
be used to endorse or promote products derived from this software without
specific prior written permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
THE POSSIBILITY OF SUCH DAMAGE.
This file is automatically generated. Please do NOT modify !!!
**/
#ifndef __FSPSUPD_H__
#define __FSPSUPD_H__
#include
#pragma pack(push, 1)
/** Fsp S Configuration
**/
typedef struct {
/** Offset 0x0020 - ActiveProcessorCores
Number of active cores. 0:Disable(Default), 1:Enable.
**/
UINT8 ActiveProcessorCores;
/** Offset 0x0021 - Disable Core1
Disable/Enable Core1. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 DisableCore1;
/** Offset 0x0022 - Disable Core2
Disable/Enable Core2. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 DisableCore2;
/** Offset 0x0023 - Disable Core3
Disable/Enable Core3. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 DisableCore3;
/** Offset 0x0024 - VMX Enable
Enable or Disable VMX. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 VmxEnable;
/** Offset 0x0025 - Depricated UPD
Depricated UPD
**/
UINT8 Reserved;
/** Offset 0x0026 - Enable Processor Trace
Enable or Disable Processor Trace feature. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 ProcessorTraceEnable;
/** Offset 0x0027 - Eist
Enable or Disable Intel SpeedStep Technology. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 Eist;
/** Offset 0x0028 - Boot PState
Boot PState with HFM or LFM. 0:HFM(Default), 1:LFM.
**/
UINT8 BootPState;
/** Offset 0x0029 - CPU power states (C-states)
Enable or Disable CPU power states (C-states). 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 EnableCx;
/** Offset 0x002A - Enhanced C-states
Enable or Disable Enhanced C-states. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 C1e;
/** Offset 0x002B - Bi-Directional PROCHOT#
Enable or Disable Bi-Directional PROCHOT#. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 BiProcHot;
/** Offset 0x002C - Max Pkg Cstate
Max Pkg Cstate. 0:PkgC0C1, 1:PkgC2, 2:PkgC3(Default), 3:PkgC6, 4:PkgC7, 5:PkgC7s,
6:PkgC8, 7:PkgC9, 8:PkgC10, 9:PkgCMax, 254:PkgCpuDefault, 255:PkgAuto.
**/
UINT8 PkgCStateLimit;
/** Offset 0x002D - C-State auto-demotion
C-State Auto Demotion. 0:Disable(Default) C1 and C3 Auto-demotion, 1:Enable C3/C6/C7
Auto-demotion to C1, 2:Enable C6/C7 Auto-demotion to C3, 3:Enable C6/C7 Auto-demotion
to C1 and C3.
**/
UINT8 CStateAutoDemotion;
/** Offset 0x002E - C-State un-demotion
C-State un-demotion. 0:Disable(Default) C1 and C3 Un-demotion, 1:Enable C1 Un-demotion,
2:Enable C3 Un-demotion, 3:Enable C1 and C3 Un-demotion.
**/
UINT8 CStateUnDemotion;
/** Offset 0x002F - Max Core C-State
Max Core C-State. 0:Unlimited, 1:C1, 2:C3, 3:C6, 4:C7, 5:C8, 6:C9, 7:C10, 8:CCx(Default).
**/
UINT8 MaxCoreCState;
/** Offset 0x0030 - Package C-State Demotion
Enable or Disable Package Cstate Demotion. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 PkgCStateDemotion;
/** Offset 0x0031 - Package C-State Un-demotion
Enable or Disable Package Cstate UnDemotion. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 PkgCStateUnDemotion;
/** Offset 0x0032 - Turbo Mode
Enable or Disable long duration Turbo Mode. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 TurboMode;
/** Offset 0x0033 - SC HDA Verb Table Entry Number
Number of Entries in Verb Table. 0(Default).
**/
UINT8 HdaVerbTableEntryNum;
/** Offset 0x0034 - SC HDA Verb Table Pointer
Pointer to Array of pointers to Verb Table. 0x00000000(Default).
**/
UINT32 HdaVerbTablePtr;
/** Offset 0x0038 - Enable/Disable P2SB device hidden.
Enable/Disable P2SB device hidden. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 P2sbUnhide;
/** Offset 0x0039 - IPU Enable/Disable
Enable/Disable IPU Device. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 IpuEn;
/** Offset 0x003A - IMGU ACPI mode selection
0:Auto, 1:IGFX Child device(Default), 2:ACPI device.
0:Disable, 1:IGFX Child device, 2:ACPI device
**/
UINT8 IpuAcpiMode;
/** Offset 0x003B - Enable ForceWake
Enable/disable ForceWake Models. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 ForceWake;
/** Offset 0x003C - GttMmAdr
GttMmAdr structure for initialization. 0xBF000000(Default).
**/
UINT32 GttMmAdr;
/** Offset 0x0040 - GmAdr
GmAdr structure for initialization. 0xA0000000(Default).
**/
UINT32 GmAdr;
/** Offset 0x0044 - Enable PavpLock
Enable/disable PavpLock. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 PavpLock;
/** Offset 0x0045 - Enable GraphicsFreqModify
Enable/disable GraphicsFreqModify. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 GraphicsFreqModify;
/** Offset 0x0046 - Enable GraphicsFreqReq
Enable/disable GraphicsFreqReq. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 GraphicsFreqReq;
/** Offset 0x0047 - Enable GraphicsVideoFreq
Enable/disable GraphicsVideoFreq. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 GraphicsVideoFreq;
/** Offset 0x0048 - Enable PmLock
Enable/disable PmLock. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 PmLock;
/** Offset 0x0049 - Enable DopClockGating
Enable/disable DopClockGating. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 DopClockGating;
/** Offset 0x004A - Enable UnsolicitedAttackOverride
Enable/disable UnsolicitedAttackOverride. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 UnsolicitedAttackOverride;
/** Offset 0x004B - Enable WOPCMSupport
Enable/disable WOPCMSupport. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 WOPCMSupport;
/** Offset 0x004C - Enable WOPCMSize
Enable/disable WOPCMSize. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 WOPCMSize;
/** Offset 0x004D - Enable PowerGating
Enable/disable PowerGating. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 PowerGating;
/** Offset 0x004E - Enable UnitLevelClockGating
Enable/disable UnitLevelClockGating. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 UnitLevelClockGating;
/** Offset 0x004F - Enable FastBoot
Enable/disable FastBoot. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 FastBoot;
/** Offset 0x0050 - Enable DynSR
Enable/disable DynSR. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 DynSR;
/** Offset 0x0051 - Enable SaIpuEnable
Enable/disable SaIpuEnable. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 SaIpuEnable;
/** Offset 0x0052 - GT PM Support
Enable/Disable GT power management support. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 PmSupport;
/** Offset 0x0053 - RC6(Render Standby)
Enable/Disable render standby support. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 EnableRenderStandby;
/** Offset 0x0054 - BMP Logo Data Size
BMP logo data buffer size. 0x00000000(Default).
**/
UINT32 LogoSize;
/** Offset 0x0058 - BMP Logo Data Pointer
BMP logo data pointer to a BMP format buffer. 0x00000000(Default).
**/
UINT32 LogoPtr;
/** Offset 0x005C - Graphics Configuration Data Pointer
Graphics configuration data used for initialization. 0x00000000(Default).
**/
UINT32 GraphicsConfigPtr;
/** Offset 0x0060 - PAVP Enable
Enable/Disable Protected Audio Visual Path (PAVP). 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 PavpEnable;
/** Offset 0x0061 - PAVP PR3
Enable/Disable PAVP PR3 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 PavpPr3;
/** Offset 0x0062 - CdClock Frequency selection
0:144MHz, 1:288MHz, 2:384MHz, 3:576MHz, 4:624MHz(Default).
0: 144 MHz, 1: 288 MHz, 2: 384 MHz, 3: 576 MHz, 4: 624 MHz
**/
UINT8 CdClock;
/** Offset 0x0063 - Enable/Disable PeiGraphicsPeimInit
Enable/Disable PeiGraphicsPeimInit 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 PeiGraphicsPeimInit;
/** Offset 0x0064 - Write Protection Support
Enable/disable Write Protection. 0:Disable, 1:Enable(Default).
**/
UINT8 WriteProtectionEnable[5];
/** Offset 0x0069 - Read Protection Support
Enable/disable Read Protection. 0:Disable, 1:Enable(Default).
**/
UINT8 ReadProtectionEnable[5];
/** Offset 0x006E - Protected Range Limitation
The address of the upper limit of protection, 0x0FFFh(Default).
**/
UINT16 ProtectedRangeLimit[5];
/** Offset 0x0078 - Protected Range Base
The base address of the upper limit of protection. 0x0000(Default).
**/
UINT16 ProtectedRangeBase[5];
/** Offset 0x0082 - Enable SC Gaussian Mixture Models
Enable/disable SC Gaussian Mixture Models. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 Gmm;
/** Offset 0x0083 - GMM Clock Gating - PGCB Clock Trunk
Enable/disable PGCB Clock Trunk. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 ClkGatingPgcbClkTrunk;
/** Offset 0x0084 - GMM Clock Gating - Sideband
Enable/disable Sideband. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 ClkGatingSb;
/** Offset 0x0085 - GMM Clock Gating - Sideband
Enable/disable Sideband. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 ClkGatingSbClkTrunk;
/** Offset 0x0086 - GMM Clock Gating - Sideband Clock Partition
Enable/disable Sideband Clock Partition. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 ClkGatingSbClkPartition;
/** Offset 0x0087 - GMM Clock Gating - Core
Enable/disable Core. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 ClkGatingCore;
/** Offset 0x0088 - GMM Clock Gating - DMA
Enable/disable DMA. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 ClkGatingDma;
/** Offset 0x0089 - GMM Clock Gating - Register Access
Enable/disable Register Access. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 ClkGatingRegAccess;
/** Offset 0x008A - GMM Clock Gating - Host
Enable/disable Host. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 ClkGatingHost;
/** Offset 0x008B - GMM Clock Gating - Partition
Enable/disable Partition. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 ClkGatingPartition;
/** Offset 0x008C - Clock Gating - Trunk
Enable/disable Trunk. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 ClkGatingTrunk;
/** Offset 0x008D - HD Audio Support
Enable/disable HDA Audio Feature. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 HdaEnable;
/** Offset 0x008E - HD Audio DSP Support
Enable/disable HDA Audio DSP Feature. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 DspEnable;
/** Offset 0x008F - Azalia wake-on-ring
Enable/disable Azalia wake-on-ring. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 Pme;
/** Offset 0x0090 - HD-Audio I/O Buffer Ownership
Set HD-Audio I/O Buffer Ownership. 0:HD-Audio link owns all the I/O buffers(Default)
0:HD-Audio link owns all the I/O buffers, 1:HD-Audio link owns 4 I/O buffers and
I2S port owns 4 I/O buffers, 3:I2S port owns all the I/O buffers
**/
UINT8 HdAudioIoBufferOwnership;
/** Offset 0x0091 - HD-Audio I/O Buffer Voltage
HD-Audio I/O Buffer Voltage Mode Selectiton . 0:3.3V(Default), 1:1.8V.
0: 3.3V, 1: 1.8V
**/
UINT8 HdAudioIoBufferVoltage;
/** Offset 0x0092 - HD-Audio Virtual Channel Type
HD-Audio Virtual Channel Type Selectiton. 0:VC0(Default), 1:VC1.
0: VC0, 1: VC1
**/
UINT8 HdAudioVcType;
/** Offset 0x0093 - HD-Audio Link Frequency
HD-Audio Virtual Channel Type Selectiton. 0:6MHz(Default), 1:12MHz, 2:24MHz, 3:48MHz,
4:96MHz, 5:Invalid.
0: 6MHz, 1: 12MHz, 2: 24MHz, 3: 48MHz, 4: 96MHz, 5: Invalid
**/
UINT8 HdAudioLinkFrequency;
/** Offset 0x0094 - HD-Audio iDisp-Link Frequency
HD-Audio iDisp-Link Frequency Selectiton. 0:6MHz(Default), 1:12MHz, 2:24MHz, 3:48MHz,
4:96MHz, 5:Invalid.
0: 6MHz, 1: 12MHz, 2: 24MHz, 3: 48MHz, 4: 96MHz, 5: Invalid
**/
UINT8 HdAudioIDispLinkFrequency;
/** Offset 0x0095 - HD-Audio iDisp-Link T-Mode
HD-Audio iDisp-Link T-Mode Selectiton. 0:2T(Default), 1:1T.
0: 2T, 1: 1T
**/
UINT8 HdAudioIDispLinkTmode;
/** Offset 0x0096 - HD-Audio Disp DMIC
HD-Audio Disp DMIC Selectiton. 0:Disable, 1:2ch array(Default), 2:4ch array.
0: Disable, 1: 2ch array, 2: 4ch array
**/
UINT8 DspEndpointDmic;
/** Offset 0x0097 - HD-Audio Bluetooth
Enable/Disable HD-Audio bluetooth. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 DspEndpointBluetooth;
/** Offset 0x0098 - HD-Audio I2S SHK
Enable/Disable HD-Audio I2S SHK. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 DspEndpointI2sSkp;
/** Offset 0x0099 - HD-Audio I2S HP
Enable/Disable HD-Audio I2S HP. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 DspEndpointI2sHp;
/** Offset 0x009A - HD-Audio Controller Power Gating
Enable/Disable HD-Audio Controller Power Gating. This option is deprecated.
$EN_DIS
**/
UINT8 AudioCtlPwrGate;
/** Offset 0x009B - HD-Audio ADSP Power Gating
Enable/Disable HD-Audio ADSP Power Gating. This option is deprecated.
$EN_DIS
**/
UINT8 AudioDspPwrGate;
/** Offset 0x009C - HD-Audio CSME Memory Transfers
Enable/Disable HD-Audio CSME Memory Transfers. 0:VC0(Default), 1:VC2.
0: VC0, 1: VC2
**/
UINT8 Mmt;
/** Offset 0x009D - HD-Audio Host Memory Transfers
Enable/Disable HD-Audio Host Memory Transfers. 0:VC0(Default), 1:VC2.
0: VC0, 1: VC2
**/
UINT8 Hmt;
/** Offset 0x009E - HD-Audio Power Gating
Enable/Disable HD-Audio BIOS Configuration Lock Down. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 HDAudioPwrGate;
/** Offset 0x009F - HD-Audio Clock Gatingn
Enable/Disable HD-Audio Clock Gating. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 HDAudioClkGate;
/** Offset 0x00A0 - Bitmask of DSP Feature
Set Bitmask of HD-Audio DSP Feature. 0x00000000(Default).
[BIT0] - WoV, [BIT1] - BT Sideband, [BIT2] - Codec VAD, [BIT5] - BT Intel HFP, [BIT6]
- BT Intel A2DP, [BIT7] - DSP based speech pre-processing disabled, [BIT8] - 0:
Intel WoV, 1: Windows Voice Activation
**/
UINT32 DspFeatureMask;
/** Offset 0x00A4 - Bitmask of supported DSP Post-Processing Modules
Set HD-Audio Bitmask of supported DSP Post-Processing Modules. 0x00000000(Default).
[BIT0] - WoV, [BIT1] - BT Sideband, [BIT2] - Codec VAD, [BIT5] - BT Intel HFP, [BIT6]
- BT Intel A2DP, [BIT7] - DSP based speech pre-processing disabled, [BIT8] - 0:
Intel WoV, 1: Windows Voice Activation
**/
UINT32 DspPpModuleMask;
/** Offset 0x00A8 - HD-Audio BIOS Configuration Lock Down
Enable/Disable HD-Audio BIOS Configuration Lock Down. 0:Disable(Default), 1:Enable.
This option is deprecated
$EN_DIS
**/
UINT8 BiosCfgLockDown;
/** Offset 0x00A9 - Enable High Precision Timer
Enable/Disable Hpet. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 Hpet;
/** Offset 0x00AA - Hpet Valid BDF Value
Enable/Disable Hpet Valid BDF Value. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 HpetBdfValid;
/** Offset 0x00AB - Bus Number of Hpet
Completer ID of Bus Number of Hpet. Default = 0xFA(Default).
**/
UINT8 HpetBusNumber;
/** Offset 0x00AC - Device Number of Hpet
Completer ID of Device Number of Hpet. 0x1F(Default).
**/
UINT8 HpetDeviceNumber;
/** Offset 0x00AD - Function Number of Hpet
Completer ID of Function Number of Hpet. 0x00(Default).
**/
UINT8 HpetFunctionNumber;
/** Offset 0x00AE - IoApic Valid BDF Value
Enable/Disable IoApic Valid BDF Value. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 IoApicBdfValid;
/** Offset 0x00AF - Bus Number of IoApic
Completer ID of Bus Number of IoApic. 0xFA(Default).
**/
UINT8 IoApicBusNumber;
/** Offset 0x00B0 - Device Number of IoApic
Completer ID of Device Number of IoApic. 0x0F(Default).
**/
UINT8 IoApicDeviceNumber;
/** Offset 0x00B1 - Function Number of IoApic
Completer ID of Function Number of IoApic. 0x00(Default).
**/
UINT8 IoApicFunctionNumber;
/** Offset 0x00B2 - IOAPIC Entry 24-119
Enable/Disable IOAPIC Entry 24-119. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 IoApicEntry24_119;
/** Offset 0x00B3 - IO APIC ID
This member determines IOAPIC ID. 0x01(Default).
**/
UINT8 IoApicId;
/** Offset 0x00B4 - IoApic Range
Define address bits 19:12 for the IOxAPIC range. 0x00(Default).
**/
UINT8 IoApicRangeSelect;
/** Offset 0x00B5 - ISH Controller
Enable/Disable ISH Controller. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 IshEnable;
/** Offset 0x00B6 - BIOS Interface Lock Down
Enable/Disable BIOS Interface Lock Down bit to prevent writes to the Backup Control
Register. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 BiosInterface;
/** Offset 0x00B7 - Bios LockDown Enable
Enable the BIOS Lock Enable (BLE) feature and set EISS bit. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 BiosLock;
/** Offset 0x00B8 - SPI EISS Status
Enable/Disable InSMM.STS (EISS) in SPI. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 SpiEiss;
/** Offset 0x00B9 - BiosLock SWSMI Number
This member describes the SwSmi value for Bios Lock. 0xA9(Default).
**/
UINT8 BiosLockSwSmiNumber;
/** Offset 0x00BA - LPSS IOSF PMCTL S0ix Enable
Enable/Disable LPSS IOSF Bridge PMCTL Register S0ix Bits. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 LPSS_S0ixEnable;
/** Offset 0x00BB
**/
UINT8 UnusedUpdSpace0[1];
/** Offset 0x00BC - LPSS I2C Clock Gating Configuration
Enable/Disable LPSS I2C Clock Gating. 0:Disable, 1:Enable(Default).
**/
UINT8 I2cClkGateCfg[8];
/** Offset 0x00C4 - PSS HSUART Clock Gating Configuration
Enable/Disable LPSS HSUART Clock Gating. 0:Disable, 1:Enable(Default).
**/
UINT8 HsuartClkGateCfg[4];
/** Offset 0x00C8 - LPSS SPI Clock Gating Configuration
Enable/Disable LPSS SPI Clock Gating. 0:Disable, 1:Enable(Default).
**/
UINT8 SpiClkGateCfg[3];
/** Offset 0x00CB - I2C Device 0
Enable/Disable I2C Device 0. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode.
0: Disabled, 1: PCI Mode, 2: ACPI Mode
**/
UINT8 I2c0Enable;
/** Offset 0x00CC - I2C Device 1
Enable/Disable I2C Device 1. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode.
0: Disabled, 1: PCI Mode, 2: ACPI Mode
**/
UINT8 I2c1Enable;
/** Offset 0x00CD - I2C Device 2
Enable/Disable I2C Device 2. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode.
0: Disabled, 1: PCI Mode, 2: ACPI Mode
**/
UINT8 I2c2Enable;
/** Offset 0x00CE - I2C Device 3
Enable/Disable I2C Device 3. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode.
0: Disabled, 1: PCI Mode, 2: ACPI Mode
**/
UINT8 I2c3Enable;
/** Offset 0x00CF - I2C Device 4
Enable/Disable I2C Device 4. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode.
0: Disabled, 1: PCI Mode, 2: ACPI Mode
**/
UINT8 I2c4Enable;
/** Offset 0x00D0 - I2C Device 5
Enable/Disable I2C Device 5. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode.
0: Disabled, 1: PCI Mode, 2: ACPI Mode
**/
UINT8 I2c5Enable;
/** Offset 0x00D1 - I2C Device 6
Enable/Disable I2C Device 6. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode.
0: Disabled, 1: PCI Mode, 2: ACPI Mode
**/
UINT8 I2c6Enable;
/** Offset 0x00D2 - I2C Device 7
Enable/Disable I2C Device 7. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode.
0: Disabled, 1: PCI Mode, 2: ACPI Mode
**/
UINT8 I2c7Enable;
/** Offset 0x00D3 - UART Device 0
Enable/Disable UART Device 0. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode.
0: Disabled, 1: PCI Mode, 2: ACPI Mode
**/
UINT8 Hsuart0Enable;
/** Offset 0x00D4 - UART Device 1
Enable/Disable UART Device 1. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode.
0: Disabled, 1: PCI Mode, 2: ACPI Mode
**/
UINT8 Hsuart1Enable;
/** Offset 0x00D5 - UART Device 2
Enable/Disable UART Device 2. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode.
0: Disabled, 1: PCI Mode, 2: ACPI Mode
**/
UINT8 Hsuart2Enable;
/** Offset 0x00D6 - UART Device 3
Enable/Disable UART Device 3. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode.
0: Disabled, 1: PCI Mode, 2: ACPI Mode
**/
UINT8 Hsuart3Enable;
/** Offset 0x00D7 - SPI UART Device 0
Enable/Disable SPI Device 0. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode.
0: Disabled, 1: PCI Mode, 2: ACPI Mode
**/
UINT8 Spi0Enable;
/** Offset 0x00D8 - SPI UART Device 1
Enable/Disable SPI Device 1. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode.
0: Disabled, 1: PCI Mode, 2: ACPI Mode
**/
UINT8 Spi1Enable;
/** Offset 0x00D9 - SPI UART Device 2
Enable/Disable SPI Device 2. 0:Disabled, 1:PCI Mode(Default), 2:ACPI Mode.
0: Disabled, 1: PCI Mode, 2: ACPI Mode
**/
UINT8 Spi2Enable;
/** Offset 0x00DA - OS Debug Feature
Enable/Disable OS Debug Feature. 0:Disable(Default), 1: Enable.
$EN_DIS
**/
UINT8 OsDbgEnable;
/** Offset 0x00DB - DCI Feature
Enable/Disable DCI Feature. 0:Disable(Default), 1: Enable.
$EN_DIS
**/
UINT8 DciEn;
/** Offset 0x00DC - UART Debug Base Address
UART Debug Base Address. 0x00000000(Default).
**/
UINT32 Uart2KernelDebugBaseAddress;
/** Offset 0x00E0 - Enable PCIE Clock Gating
Enable/disable PCIE Clock Gating. 0:Enable, 1:Disable(Default).
0:Enable, 1:Disable
**/
UINT8 PcieClockGatingDisabled;
/** Offset 0x00E1 - Enable PCIE Root Port 8xh Decode
Enable/disable PCIE Root Port 8xh Decode. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 PcieRootPort8xhDecode;
/** Offset 0x00E2 - PCIE 8xh Decode Port Index
PCIE 8xh Decode Port Index. 0x00(Default).
**/
UINT8 Pcie8xhDecodePortIndex;
/** Offset 0x00E3 - Enable PCIE Root Port Peer Memory Write
Enable/disable PCIE root port peer memory write. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 PcieRootPortPeerMemoryWriteEnable;
/** Offset 0x00E4 - PCIE SWSMI Number
This member describes the SwSmi value for override PCIe ASPM table. 0xAA(Default).
**/
UINT8 PcieAspmSwSmiNumber;
/** Offset 0x00E5
**/
UINT8 UnusedUpdSpace1[1];
/** Offset 0x00E6 - PCI Express Root Port
Control the PCI Express Root Port . 0:Disable, 1:Enable(Default).
**/
UINT8 PcieRootPortEn[6];
/** Offset 0x00EC - Hide PCIE Root Port Configuration Space
Enable/disable Hide PCIE Root Port Configuration Space. 0:Disable(Default), 1:Enable.
**/
UINT8 PcieRpHide[6];
/** Offset 0x00F2 - PCIE Root Port Slot Implement
Enable/disable PCIE Root Port Slot Implement. 0:Disable, 1:Enable(Default).
**/
UINT8 PcieRpSlotImplemented[6];
/** Offset 0x00F8 - Hot Plug
PCI Express Hot Plug Enable/Disable. 0:Disable, 1:Enable(Default).
**/
UINT8 PcieRpHotPlug[6];
/** Offset 0x00FE - PCIE PM SCI
Enable/Disable PCI Express PME SCI. 0:Disable(Default), 1:Enable.
**/
UINT8 PcieRpPmSci[6];
/** Offset 0x0104 - PCIE Root Port Extended Sync
Enable/Disable PCIE Root Port Extended Sync. 0:Disable, 1:Enable(Default).
**/
UINT8 PcieRpExtSync[6];
/** Offset 0x010A - Transmitter Half Swing
Transmitter Half Swing Enable/Disable. 0:Disable, 1:Enable(Default).
**/
UINT8 PcieRpTransmitterHalfSwing[6];
/** Offset 0x0110 - ACS
Enable/Disable Access Control Services Extended Capability. 0:Disable, 1:Enable(Default).
**/
UINT8 PcieRpAcsEnabled[6];
/** Offset 0x0116 - Clock Request Support
Enable/Disable CLKREQ# Support. 0:Disable, 1:Enable(Default).
**/
UINT8 PcieRpClkReqSupported[6];
/** Offset 0x011C - Configure CLKREQ Number
Configure Root Port CLKREQ Number if CLKREQ is supported. Default=0x04, 0x05, 0x00,
0x01, 0x02, 0x03.
**/
UINT8 PcieRpClkReqNumber[6];
/** Offset 0x0122 - CLKREQ# Detection
Enable/Disable CLKREQ# Detection Probe. 0: Disable(Default), 1: Enable.
**/
UINT8 PcieRpClkReqDetect[6];
/** Offset 0x0128 - Advanced Error Reporting
Enable/Disable Advanced Error Reporting. 0: Disable(Default), 1: Enable.
**/
UINT8 AdvancedErrorReporting[6];
/** Offset 0x012E - PME Interrupt
Enable/Disable PME Interrupt. 0: Disable(Default), 1: Enable.
**/
UINT8 PmeInterrupt[6];
/** Offset 0x0134 - URR
PCI Express Unsupported Request Reporting Enable/Disable. 0:Disable(Default), 1:Enable.
**/
UINT8 UnsupportedRequestReport[6];
/** Offset 0x013A - FER
PCI Express Device Fatal Error Reporting Enable/Disable. 0:Disable(Default), 1:Enable.
**/
UINT8 FatalErrorReport[6];
/** Offset 0x0140 - NFER
PCI Express Device Non-Fatal Error Reporting Enable/Disable. 0:Disable(Default), 1:Enable.
**/
UINT8 NoFatalErrorReport[6];
/** Offset 0x0146 - CER
PCI Express Device Correctable Error Reporting Enable/Disable. 0:Disable(Default), 1:Enable.
**/
UINT8 CorrectableErrorReport[6];
/** Offset 0x014C - SEFE
Root PCI Express System Error on Fatal Error Enable/Disable. 0:Disable(Default), 1:Enable.
**/
UINT8 SystemErrorOnFatalError[6];
/** Offset 0x0152 - SENFE
Root PCI Express System Error on Non-Fatal Error Enable/Disable. 0:Disable(Default), 1:Enable.
**/
UINT8 SystemErrorOnNonFatalError[6];
/** Offset 0x0158 - SECE
Root PCI Express System Error on Correctable Error Enable/Disable. 0:Disable(Default), 1:Enable.
**/
UINT8 SystemErrorOnCorrectableError[6];
/** Offset 0x015E - PCIe Speed
Configure PCIe Speed. 0:Auto(Default), 1:Gen1, 2:Gen2, 3:Gen3.
**/
UINT8 PcieRpSpeed[6];
/** Offset 0x0164 - Physical Slot Number
Physical Slot Number for PCIE Root Port. Default=0x00, 0x01, 0x02, 0x03, 0x04, 0x05.
**/
UINT8 PhysicalSlotNumber[6];
/** Offset 0x016A - CTO
Enable/Disable PCI Express Completion Timer TO . 0:Disable(Default), 1:Enable.
**/
UINT8 PcieRpCompletionTimeout[6];
/** Offset 0x0170 - PTM Support
Enable/Disable PTM Support. 0:Disable(Default), 1:Enable.
**/
UINT8 PtmEnable[6];
/** Offset 0x0176 - ASPM
PCI Express Active State Power Management settings. 0:Disable, 1:L0s, 2:L1, 3:L0sL1,
4:Auto(Default).
**/
UINT8 PcieRpAspm[6];
/** Offset 0x017C - L1 Substates
PCI Express L1 Substates settings. 0:Disable, 1:L1.1, 2:L1.2, 3:L1.1 & L1.2(Default).
**/
UINT8 PcieRpL1Substates[6];
/** Offset 0x0182 - PCH PCIe LTR
PCH PCIE Latency Reporting Enable/Disable. 0:Disable, 1:Enable(Default).
**/
UINT8 PcieRpLtrEnable[6];
/** Offset 0x0188 - PCIE LTR Lock
PCIE LTR Configuration Lock. 0:Disable(Default), 1:Enable.
**/
UINT8 PcieRpLtrConfigLock[6];
/** Offset 0x018E - PME_B0_S5 Disable bit
PME_B0_S5_DIS bit in the General PM Configuration B (GEN_PMCON_B) register. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 PmeB0S5Dis;
/** Offset 0x018F - PCI Clock Run
This member describes whether or not the PCI ClockRun feature of SC should be enabled.
0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 PciClockRun;
/** Offset 0x0190 - Enable/Disable Timer 8254 Clock Setting
Enable/Disable Timer 8254 Clock. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 Timer8254ClkSetting;
/** Offset 0x0191 - Chipset SATA
Enables or Disables the Chipset SATA Controller. The Chipset SATA controller supports
the 2 black internal SATA ports (up to 3Gb/s supported per port). 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 EnableSata;
/** Offset 0x0192 - SATA Mode Selection
Determines how SATA controller(s) operate. 0:AHCI(Default), 1:RAID.
0:AHCI, 1:RAID
**/
UINT8 SataMode;
/** Offset 0x0193 - Aggressive LPM Support
Enable PCH to aggressively enter link power state. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 SataSalpSupport;
/** Offset 0x0194 - SATA Power Optimization
Enable SATA Power Optimizer on SC side. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 SataPwrOptEnable;
/** Offset 0x0195 - eSATA Speed Limit
Enable/Disable eSATA Speed Limit. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 eSATASpeedLimit;
/** Offset 0x0196 - SATA Speed Limit
SATA Speed Limit. 0h:ScSataSpeed(Default), 1h:1.5Gb/s(Gen 1), 2h:3Gb/s(Gen 2), 3h:6Gb/s(Gen 3).
0:Default, 1: 1.5 Gb/s (Gen 1), 2: 3 Gb/s(Gen 2), 3: 6 Gb/s (Gen 1)
**/
UINT8 SpeedLimit;
/** Offset 0x0197
**/
UINT8 UnusedUpdSpace2[1];
/** Offset 0x0198 - SATA Port
Enable or Disable SATA Port. 0:Disable, 1:Enable(Default).
**/
UINT8 SataPortsEnable[2];
/** Offset 0x019A - SATA Port DevSlp
Enable/Disable SATA Port DevSlp. Board rework for LP needed before enable. 0:Disable(Default), 1:Enable.
**/
UINT8 SataPortsDevSlp[2];
/** Offset 0x019C - SATA Port HotPlug
Enable/Disable SATA Port Hotplug . 0:Disable(Default), 1:Enable.
**/
UINT8 SataPortsHotPlug[2];
/** Offset 0x019E - Mechanical Presence Switch
Controls reporting if this port has an Mechanical Presence Switch.\n
Note:Requires hardware support. 0:Disable, 1:Enable(Default).
**/
UINT8 SataPortsInterlockSw[2];
/** Offset 0x01A0 - External SATA Ports
Enable/Disable External SATA Ports. 0:Disable(Default), 1:Enable.
**/
UINT8 SataPortsExternal[2];
/** Offset 0x01A2 - Spin Up Device
Enable/Disable device spin up at boot on selected Sata Ports. 0:Disable(Default), 1:Enable.
**/
UINT8 SataPortsSpinUp[2];
/** Offset 0x01A4 - SATA Solid State
Identify the SATA port is connected to Solid State Drive or Hard Disk Drive. 0:Hard
Disk Drive(Default), 1:Solid State Drive.
**/
UINT8 SataPortsSolidStateDrive[2];
/** Offset 0x01A6 - DITO Configuration
Enable/Disable DITO Configuration. 0:Disable(Default), 1:Enable.
**/
UINT8 SataPortsEnableDitoConfig[2];
/** Offset 0x01A8 - DM Value
DM Value. 0:Minimum, 0x0F:Maximum(Default).
**/
UINT8 SataPortsDmVal[2];
/** Offset 0x01AA
**/
UINT8 UnusedUpdSpace3[2];
/** Offset 0x01AC - DITO Value
DEVSLP Idle Timeout Value. 0:Minimum, 0x03FF:Maximum, 0x0271(Default).
**/
UINT16 SataPortsDitoVal[2];
/** Offset 0x01B0 - Subsystem Vendor ID
Subsystem Vendor ID. 0x8086(Default).
**/
UINT16 SubSystemVendorId;
/** Offset 0x01B2 - Subsystem ID
Subsystem ID. 0x7270(Default).
**/
UINT16 SubSystemId;
/** Offset 0x01B4 - CRIDSettings
PMC CRID setting. 0:Disable(Default), 1:CRID_1, 2:CRID_2, 3:CRID_3.
**/
UINT8 CRIDSettings;
/** Offset 0x01B5 - ResetSelect
ResetSelect. 0x6:warm reset(Default), 0xE:cold reset.
**/
UINT8 ResetSelect;
/** Offset 0x01B6 - SD Card Support (D27:F0)
Enable/Disable SD Card Support. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 SdcardEnabled;
/** Offset 0x01B7 - SeMMC Support (D28:F0)
Enable/Disable eMMC Support. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 eMMCEnabled;
/** Offset 0x01B8 - eMMC Max Speed
Select the eMMC max Speed allowed. 0:HS400(Default), 1:HS200, 2:DDR50.
0:HS400, 1: HS200, 2:DDR50
**/
UINT8 eMMCHostMaxSpeed;
/** Offset 0x01B9 - UFS Support (D29:F0)
Enable/Disable SDIO Support. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 UfsEnabled;
/** Offset 0x01BA - SDIO Support (D30:F0)
Enable/Disable SDIO Support. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 SdioEnabled;
/** Offset 0x01BB - GPP Lock Feature
Enable/Disable GPP lock. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 GppLock;
/** Offset 0x01BC - Serial IRQ
Enable/Disable Serial IRQ. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 SirqEnable;
/** Offset 0x01BD - Serial IRQ Mode
Serial IRQ Mode Selection. 0:Quiet mode(Default), 1:Continuous mode.
$EN_DIS
**/
UINT8 SirqMode;
/** Offset 0x01BE - Start Frame Pulse Width
Start Frame Pulse Width Value. 0:ScSfpw4Clk(Default), 1: ScSfpw6Clk, 2:ScSfpw8Clk.
0:ScSfpw4Clk, 1:ScSfpw6Clk, 2:ScSfpw8Clk
**/
UINT8 StartFramePulse;
/** Offset 0x01BF - Enable SMBus
Enable/disable SMBus controller. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 SmbusEnable;
/** Offset 0x01C0 - SMBus ARP Support
Enable/disable SMBus ARP Support. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 ArpEnable;
/** Offset 0x01C1
**/
UINT8 UnusedUpdSpace4;
/** Offset 0x01C2 - SMBus Table Elements
The number of elements in the Reserved SMBus Address Table. 0x0080(Default).
**/
UINT16 NumRsvdSmbusAddresses;
/** Offset 0x01C4 - Reserved SMBus Address Table
Array of addresses reserved for non-ARP-capable SMBus devices. 0x00(Default).
**/
UINT8 RsvdSmbusAddressTable[128];
/** Offset 0x0244 - XHCI Disable Compliance Mode
Options to disable XHCI Link Compliance Mode. Default is FALSE to not disable Compliance
Mode. Set TRUE to disable Compliance Mode. 0:FALSE(Default), 1:True.
$EN_DIS
**/
UINT8 DisableComplianceMode;
/** Offset 0x0245 - USB Per-Port Control
Control each of the USB ports enable/disable. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 UsbPerPortCtl;
/** Offset 0x0246 - xHCI Mode
Mode of operation of xHCI controller. 0:Disable, 1:Enable, 2:Auto(Default)
0:Disable, 1:Enable, 2:Auto
**/
UINT8 Usb30Mode;
/** Offset 0x0247
**/
UINT8 UnusedUpdSpace5[1];
/** Offset 0x0248 - Enable USB2 ports
Enable/disable per USB2 ports. One byte for each port, byte0 for port0, byte1 for
port1, and so on. 0x01(Default).
**/
UINT8 PortUsb20Enable[8];
/** Offset 0x0250 - USB20 Over Current Pin
Over Current Pin number of USB 2.0 Port. 0x00(Default).
**/
UINT8 PortUs20bOverCurrentPin[8];
/** Offset 0x0258 - XDCI Support
Enable/Disable XDCI. 0:Disable, 1:PCI_Mode(Default), 2:ACPI_mode.
0:Disable, 1:PCI_Mode, 2:ACPI_mode
**/
UINT8 UsbOtg;
/** Offset 0x0259 - Enable XHCI HSIC Support
Enable/Disable USB HSIC1. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 HsicSupportEnable;
/** Offset 0x025A - Enable USB3 ports
Enable/disable per USB3 ports. One byte for each port, byte0 for port0, byte1 for
port1, and so on. 0x01(Default).
**/
UINT8 PortUsb30Enable[6];
/** Offset 0x0260 - USB20 Over Current Pin
Over Current Pin number of USB 3.0 Port. 0x01(Default).
**/
UINT8 PortUs30bOverCurrentPin[6];
/** Offset 0x0266 - Enable XHCI SSIC Support
Enable/disable XHCI SSIC ports. One byte for each port, byte0 for port0, byte1 for
port1. 0x00(Default).
**/
UINT8 SsicPortEnable[2];
/** Offset 0x0268 - SSIC Dlane PowerGating
Enable/Disable SSIC Data lane Power Gating. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT16 DlanePwrGating;
/** Offset 0x026A - VT-d
Enable/Disable VT-d. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 VtdEnable;
/** Offset 0x026B - SMI Lock bit
Enable/Disable SMI_LOCK bit to prevent writes to the Global SMI Enable bit. 0:Disable,
1:Enable(Default).
$EN_DIS
**/
UINT8 LockDownGlobalSmi;
/** Offset 0x026C - HDAudio Delay Timer
The delay timer after Azalia reset. 0x012C(Default).
**/
UINT16 ResetWaitTimer;
/** Offset 0x026E - RTC Lock Bits
Enable/Disable RTC Lock Bits. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 RtcLock;
/** Offset 0x026F - SATA Test Mode Selection
Enable/Disable SATA Test Mode. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 SataTestMode;
/** Offset 0x0270 - XHCI SSIC RATE
Set XHCI SSIC1 Rate to A Series or B Series. 1:A Series(Default), 2:B Series.
**/
UINT8 SsicRate[2];
/** Offset 0x0272 - SMBus Dynamic Power Gating
Enable/Disable SMBus dynamic power gating. 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT16 DynamicPowerGating;
/** Offset 0x0274 - Max Snoop Latency
Latency Tolerance Reporting Max Snoop Latency. 0x0000(Default).
**/
UINT16 PcieRpLtrMaxSnoopLatency[6];
/** Offset 0x0280 - Snoop Latency Override
Snoop Latency Override for PCH PCIE. \n
Disabled:Disable override.\n
Manual:Manually enter override values.\n
Auto:Maintain default BIOS flow. 0:Disable, 1:Enable, 2:Auto(Default).
**/
UINT8 PcieRpSnoopLatencyOverrideMode[6];
/** Offset 0x0286
**/
UINT8 UnusedUpdSpace6[2];
/** Offset 0x0288 - Snoop Latency Value
LTR Snoop Latency value of PCH PCIE. 0:Minimum, 0x03FF:Maximum, 0x003C(Default).
**/
UINT16 PcieRpSnoopLatencyOverrideValue[6];
/** Offset 0x0294 - Snoop Latency Multiplier
LTR Snoop Latency Multiplier of PCH PCIE. 0:1ns, 1:32ns, 2:1024ns(Default), 3:32768ns,
4:1048576ns, 5:33554432ns.
**/
UINT8 PcieRpSnoopLatencyOverrideMultiplier[6];
/** Offset 0x029A - Skip Multi-Processor Initialization
When this is skipped, boot loader must initialize processors before SilicionInit
API. 0: Initialize(Default), 1: Skip
$EN_DIS
**/
UINT8 SkipMpInit;
/** Offset 0x029B - DCI Auto Detect
Enable/disable DCI AUTO mode. Enabled(Default).
$EN_DIS
**/
UINT8 DciAutoDetect;
/** Offset 0x029C - Max Non-Snoop Latency
Latency Tolerance Reporting, Max Non-Snoop Latency. 0x0000(Default).
**/
UINT16 PcieRpLtrMaxNonSnoopLatency[6];
/** Offset 0x02A8 - Non Snoop Latency Override
Non Snoop Latency Override for PCH PCIE. \n
Disabled:Disable override.\n
Manual:Manually enter override values.\n
Auto: Maintain default BIOS flow. 0:Disable, 1:Enable, 2:Auto(Default).
**/
UINT8 PcieRpNonSnoopLatencyOverrideMode[6];
/** Offset 0x02AE - Halt and Lock TCO Timer
Halt and Lock the TCO Timer (Watchdog).
0:No, 1:Yes (default)
**/
UINT8 TcoTimerHaltLock;
/** Offset 0x02AF - Power Button Override Period
specifies how long will PMC wait before initiating a global reset. 000b-4s(default),
001b-6s, 010b-8s, 011b-10s, 100b-12s, 101b-14s.)
0x0:4s, 0x1:6s, 0x2:8s, 0x3:10s, 0x4:12s, 0x5:14s
**/
UINT8 PwrBtnOverridePeriod;
/** Offset 0x02B0 - Non Snoop Latency Value
LTR Non Snoop Latency value of PCH PCIE. 0:Minimum, 0x03FF:Maximum, 0x003C(Default).
**/
UINT16 PcieRpNonSnoopLatencyOverrideValue[6];
/** Offset 0x02BC - Non Snoop Latency Multiplier
LTR Non Snoop Latency Multiplier of PCH PCIE. 0:1ns, 1:32ns, 2:1024ns(Default),
3:32768ns, 4:1048576ns, 5:33554432ns.
**/
UINT8 PcieRpNonSnoopLatencyOverrideMultiplier[6];
/** Offset 0x02C2 - PCIE Root Port Slot Power Limit Scale
Specifies scale used for slot power limit value. 0x00(Default).
**/
UINT8 PcieRpSlotPowerLimitScale[6];
/** Offset 0x02C8 - PCIE Root Port Slot Power Limit Value
Specifies upper limit on power supplie by slot. 0x00(Default).
**/
UINT8 PcieRpSlotPowerLimitValue[6];
/** Offset 0x02CE - Power Button Native Mode Disable
Disable power button native mode, when 1, this will result in the PMC logic constantly
seeing the power button as de-asserted. 0 (default))
$EN_DIS
**/
UINT8 DisableNativePowerButton;
/** Offset 0x02CF - Power Button Debounce Mode
Enable interrupt when PWRBTN# is asserted. 0:Disabled, 1:Enabled(default)
$EN_DIS
**/
UINT8 PowerButterDebounceMode;
/** Offset 0x02D0 - SDIO_TX_CMD_DLL_CNTL
SDIO_TX_CMD_DLL_CNTL. 0x505(Default).
**/
UINT32 SdioTxCmdCntl;
/** Offset 0x02D4 - SDIO_TX_DATA_DLL_CNTL1
SDIO_TX_DATA_DLL_CNTL1. 0xE(Default).
**/
UINT32 SdioTxDataCntl1;
/** Offset 0x02D8 - SDIO_TX_DATA_DLL_CNTL2
SDIO_TX_DATA_DLL_CNTL2. 0x22272828(Default).
**/
UINT32 SdioTxDataCntl2;
/** Offset 0x02DC - SDIO_RX_CMD_DATA_DLL_CNTL1
SDIO_RX_CMD_DATA_DLL_CNTL1. 0x16161616(Default).
**/
UINT32 SdioRxCmdDataCntl1;
/** Offset 0x02E0 - SDIO_RX_CMD_DATA_DLL_CNTL2
SDIO_RX_CMD_DATA_DLL_CNTL2. 0x10000(Default).
**/
UINT32 SdioRxCmdDataCntl2;
/** Offset 0x02E4 - SDCARD_TX_CMD_DLL_CNTL
SDCARD_TX_CMD_DLL_CNTL. 0x505(Default).
**/
UINT32 SdcardTxCmdCntl;
/** Offset 0x02E8 - SDCARD_TX_DATA_DLL_CNTL1
SDCARD_TX_DATA_DLL_CNTL1. 0xA13(Default).
**/
UINT32 SdcardTxDataCntl1;
/** Offset 0x02EC - SDCARD_TX_DATA_DLL_CNTL2
SDCARD_TX_DATA_DLL_CNTL2. 0x24242828(Default).
**/
UINT32 SdcardTxDataCntl2;
/** Offset 0x02F0 - SDCARD_RX_CMD_DATA_DLL_CNTL1
SDCARD_RX_CMD_DATA_DLL_CNTL1. 0x73A3637(Default).
**/
UINT32 SdcardRxCmdDataCntl1;
/** Offset 0x02F4 - SDCARD_RX_STROBE_DLL_CNTL
SDCARD_RX_STROBE_DLL_CNTL. 0x0(Default).
**/
UINT32 SdcardRxStrobeCntl;
/** Offset 0x02F8 - SDCARD_RX_CMD_DATA_DLL_CNTL2
SDCARD_RX_CMD_DATA_DLL_CNTL2. 0x10000(Default).
**/
UINT32 SdcardRxCmdDataCntl2;
/** Offset 0x02FC - EMMC_TX_CMD_DLL_CNTL
EMMC_TX_CMD_DLL_CNTL. 0x505(Default).
**/
UINT32 EmmcTxCmdCntl;
/** Offset 0x0300 - EMMC_TX_DATA_DLL_CNTL1
EMMC_TX_DATA_DLL_CNTL1. 0xC11(Default).
**/
UINT32 EmmcTxDataCntl1;
/** Offset 0x0304 - EMMC_TX_DATA_DLL_CNTL2
EMMC_TX_DATA_DLL_CNTL2. 0x1C2A2927(Default).
**/
UINT32 EmmcTxDataCntl2;
/** Offset 0x0308 - EMMC_RX_CMD_DATA_DLL_CNTL1
EMMC_RX_CMD_DATA_DLL_CNTL1. 0x000D162F(Default).
**/
UINT32 EmmcRxCmdDataCntl1;
/** Offset 0x030C - EMMC_RX_STROBE_DLL_CNTL
EMMC_RX_STROBE_DLL_CNTL. 0x0a0a(Default).
**/
UINT32 EmmcRxStrobeCntl;
/** Offset 0x0310 - EMMC_RX_CMD_DATA_DLL_CNTL2
EMMC_RX_CMD_DATA_DLL_CNTL2. 0x1003b(Default).
**/
UINT32 EmmcRxCmdDataCntl2;
/** Offset 0x0314 - EMMC_MASTER_DLL_CNTL
EMMC_MASTER_DLL_CNTL. 0x001(Default).
**/
UINT32 EmmcMasterSwCntl;
/** Offset 0x0318 - SGX Epoch 0
SGX Epoch 0. 0x0(Default).
**/
UINT64 SgxEpoch0;
/** Offset 0x0320 - SGX Epoch 1
SGX Epoch 1. 0x0(Default).
**/
UINT64 SgxEpoch1;
/** Offset 0x0328 - MicrocodePatchAddress
MicrocodePatchAddress. 0x0(Default).
**/
UINT64 MicrocodePatchAddress;
/** Offset 0x0330 - PCIe Selectable De-emphasis
When the Link is operating at 5.0 GT/s speed, this bit selects the level of de-emphasis
for an Upstream component. 1b:-3.5 dB 0b:-6 dB. 0:Disable, 1:Enable(Default).
**/
UINT8 PcieRpSelectableDeemphasis[6];
/** Offset 0x0336 - Monitor Mwait Enable
Enable/Disable Monitor Mwait. For Windows* OS, this should be Enabled. For Linux
based OS, this should be Disabled. 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 MonitorMwaitEnable;
/** Offset 0x0337 - Universal Audio Architecture compliance for DSP enabled system
0: Not-UAA Compliant (Intel SST driver supported only), 1: UAA Compliant (HDA Inbox
driver or SST driver supported).
$EN_DIS
**/
UINT8 HdAudioDspUaaCompliance;
/** Offset 0x0338 - IRQ Interrupt Polarity Control
Set IRQ Interrupt Polarity Control to ITSS.IPC[0]~IPC[3]. 0:Active High, 1:Active Low
**/
UINT32 IPC[4];
/** Offset 0x0348 - Disable ModPHY dynamic power gate
Disable ModPHY dynamic power gate for the specific SATA port.
**/
UINT8 SataPortsDisableDynamicPg[2];
/** Offset 0x034A - Init CPU during S3 resume
0: Do not initialize CPU during S3 resume. 1: Initialize CPU during S3 resume.
$EN_DIS
**/
UINT8 InitS3Cpu;
/** Offset 0x034B - CNVi Mode
Selects CNVi Mode. 0:Disable, 1:Auto(Default).
$EN_DIS
**/
UINT8 CnviMode;
/** Offset 0x034C - BT Interface
CNVi BT interface. 0:UART, 1:USB(Default).
$EN_DIS
**/
UINT8 CnviBtInterface;
/** Offset 0x034D - Disable Sx Wake
Enables/Disables wake from Sx . 0:No(Default), 1:Yes.
$EN_DIS
**/
UINT8 DisableSxWake;
/** Offset 0x034E - ModifyCrfGpios
Feature to Configure CRF Gpios Conditionally upon platform requirement, configuration
of GNSS and BtOnUart gpios will/will not be done based on this policy
$EN_DIS
**/
UINT8 ModifyCrfGpios;
/** Offset 0x034F - dGPU Hold Reset
dGPU Hold Reset GPIO information from GPIO community, Pin and Active
**/
UINT8 HgDgpuHoldRst[8];
/** Offset 0x0357 - dGPU Power Enable
dGPU power enable GPIO information from GPIO community, Pin and Active
**/
UINT8 HgDgpuPwrEnable[8];
/** Offset 0x035F - HG Enable
Enables/Disables Hybrid Graphics . 0 : Disable(Default), 1 : Enable
0x1:Enabled, 0x0:Disabled
**/
UINT8 HgEnabled;
/** Offset 0x0360 - dGPU Delay after power enable
Delay for DGPU after Hold Reset if HG is enable : 0 : Minimum , 1000 : Maximum ,
300 : Default
0 : Minimum , 1000 : Maximum , 300 : Default
**/
UINT16 HgDelayAfterPwrEn;
/** Offset 0x0362 - dGPU Delay after hold reset
Delay for DGPU after Hold Reset if HG is enable : 0 : Minimum , 1000 : Maximum ,
100 : Default
0 : Minimum , 1000 : Maximum , 100 : Default
**/
UINT16 HgDelayAfterHoldReset;
/** Offset 0x0364 - CpuS3ResumeMtrrDataSize
Size of S3 resume MTRR data.
**/
UINT16 CpuS3ResumeMtrrDataSize;
/** Offset 0x0366 - PAVP ASMF
Enable/Disable PAVP ASMF 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 PavpAsmf;
/** Offset 0x0367 - PAVP Auto TearDown Grace Period Enable
Enable/Disable PAVP Auto TearDown Grace Period 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 AutoTearDownGracePeriod;
/** Offset 0x0368 - CpuS3ResumeMtrrData
Pointer CPU S3 Resume MTRR Data
**/
UINT32 CpuS3ResumeMtrrData;
/** Offset 0x036C - SeC EndOfPost EnableDisable
Enable/Disable SeC EOPEnable 0:Disable, 1:Enable(Default).
$EN_DIS
**/
UINT8 EndOfPostEnabled;
/** Offset 0x036D - EnableDigitalThermalSensor EnableDisable
Enable/Disable EnableDigitalThermalSensor 0:Disable(Default), 1:Enable.
$EN_DIS
**/
UINT8 EnableDigitalThermalSensor;
/** Offset 0x036E - PNP Mode
Select PNP Mode. 0:Disable,1:Power,2:Performance,3:Power&Performance
0:Disable,1:Power,2:Performance,3:Power&Performance(default)
**/
UINT8 PnpSettings;
/** Offset 0x036F - OsBoot EnableDisable
Select OsBoot. 1:EMMC boot, 0:HardDisk boot
1:EMMC boot, 1:HardDisk boot
**/
UINT8 OsBoot;
/** Offset 0x0370 - System Vendor ID
Upd for vendor ID for assigning to devices
**/
UINT16 SiSVID;
/** Offset 0x0372 - Sub system Vendor ID
Upd for subsystem ID for assigning to devices
**/
UINT16 SiSSID;
/** Offset 0x0374 - CpuBistData
Pointer CPU BIST Data
**/
UINT32 CpuBistData;
/** Offset 0x0378 - Base of memory region allocated for Processor Trace
Base address of memory region allocated for Processor Trace. Processor Trace requires
2^N alignment and size in bytes per thread, from 4KB to 128MB. 0: Disable
**/
UINT64 ProcessorTraceMemBase;
/** Offset 0x0380 - Memory region allocation for Processor Trace
Length in bytes of memory region allocated for Processor Trace. Processor Trace
requires 2^N alignment and size in bytes per thread, from 4KB to 128MB. 0: Disable
**/
UINT32 ProcessorTraceMemLength;
/** Offset 0x0384 - AP threads Idle Manner
AP threads Idle Manner for waiting signal to run 1:HALT loop 2:MWAIT loop 3:RUN lOOP
$EN_DIS
**/
UINT8 ApIdleManner;
/** Offset 0x0385 - Skip P-unit Initialization
When this is skipped, boot loader must initialize P-unit before SilicionInit API.
0: Initialize(Default), 1: Skip
$EN_DIS
**/
UINT8 SkipPunitInit;
/** Offset 0x0386 - Sub system Vendor ID VGA
Graphics PCI subsystem HgSubSystemId
**/
UINT16 HgSubSystemId;
/** Offset 0x0388 - USB Per Port HS Preemphasis Bias
USB Per Port HS Preemphasis Bias. 000b-0mV, 001b-40.5mV, 010b-60.5mV, 011b-102mV,
100b-102mV, 101b-142mV, 110b-162.5mV, 111b-202.5mV. One byte for each port.
**/
UINT8 Usb2AfePetxiset[8];
/** Offset 0x0390 - USB Per Port HS Transmitter Bias
USB Per Port HS Transmitter Bias. 000b-0mV, 001b-40.5mV, 010b-60.5mV, 011b-102mV,
100b-102mV, 101b-142mV, 110b-162.5mV, 111b-202.5mV. One byte for each port.
**/
UINT8 Usb2AfeTxiset[8];
/** Offset 0x0398 - USB Per Port HS Transmitter Emphasis
USB Per Port HS Transmitter Emphasis. 00b - Emphasis OFF, 01b - De-emphasis ON,
10b - Pre-emphasis ON, 11b - Pre-emphasis & De-emphasis ON. One byte for each port.
**/
UINT8 Usb2AfePredeemp[8];
/** Offset 0x03A0 - USB Per Port Half Bit Pre-emphasis
USB Per Port Half Bit Pre-emphasis. 1b - half-bit pre-emphasis, 0b - full-bit pre-emphasis.
One byte for each port.
**/
UINT8 Usb2AfePehalfbit[8];
/** Offset 0x03A8 - Intel Processor Trace output Scheme method
Intel Processor Trace output Scheme method 0:Single Range Output (Default) 1. ToPA Output
**/
UINT8 ProcessorTraceOutputScheme;
/** Offset 0x03A9
**/
UINT8 ReservedFspsUpd[7];
} FSP_S_CONFIG;
/** Fsp S UPD Configuration
**/
typedef struct {
/** Offset 0x0000
**/
FSP_UPD_HEADER FspUpdHeader;
/** Offset 0x0020
**/
FSP_S_CONFIG FspsConfig;
/** Offset 0x03B0
**/
UINT8 UnusedUpdSpace7[78];
/** Offset 0x03FE
**/
UINT16 UpdTerminator;
} FSPS_UPD;
#pragma pack(pop)
#endif