# What is bucts? Many Intel southbridges provide a mechanism called Back Up Control Top Swap (`BUC.TS`). This functionality allows to have the southbridge fetch the reset vector or the beginning of the bootblock at a 64K/128/256K offset from the usual top of flash. This can be useful in different ways: - Have a backup bootblock in case of bootblock hacking; - Some vendor BIOS only write protect their bootblock so this tool makes it possible to circumvent this protection to allow flashing and booting coreboot. The BUC.TS status is stored in a nvram bit. To clear it one has to remove the RTC battery. # Operation Description First compile bucts by running make: $ make Then you can view the current system settings: $ ./bucts --print To flip the decode address of the bootblock, by setting `BUC.TS` to 1: $ ./bucts --set To set the behavior the regular mapping, by setting `BUC.TS` to 0 $ ./bucts --unset # Details Example Bootblock size of 64KB (this is only configurable to be something else like 128 or 256K on PCH Intel targets).
+-------------+ -> 0x200000 +-------------+ -> 0xFFFFFFFF +-------------+ -> 0xFFFFFFFF | | | | | | | bootblock_0 | | bootblock_0 | | bootblock_1 | | | | | | | +-------------+ -> 0x1F0000 +-------------+ -> 0xFFFF0000 +-------------+ -> 0xFFFF0000 | | | | | | | bootblock_1 | | bootblock_1 | | bootblock_0 | | | | | | | +-------------+ -> 0x1E0000 +-------------+ -> 0xFFFE0000 +-------------+ -> 0xFFFE0000 | | | | | | | | | | | | Z Z Z Z Z Z Z Z Z Z Z Z | | | | | | | | | | | | FLASH (2M) Memory Map BUC.TS=0 Memory Map BUC.TS=1