/* * This file is part of the flashrom project. * * Copyright (C) 2000 Silicon Integrated System Corporation * Copyright (C) 2004 Tyan Corp * Copyright (C) 2005-2008 coresystems GmbH * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ #include #include #include #include #include #include #include #include #include #include #include /* for iopl */ #if defined (__sun) && (defined(__i386) || defined(__amd64)) #include #include #include #include #endif #include "flash.h" char *chip_to_probe = NULL; struct pci_access *pacc; /* For board and chipset_enable */ int exclude_start_page, exclude_end_page; int verbose = 0; int fd_mem; struct pci_dev *pci_dev_find(uint16_t vendor, uint16_t device) { struct pci_dev *temp; struct pci_filter filter; pci_filter_init(NULL, &filter); filter.vendor = vendor; filter.device = device; for (temp = pacc->devices; temp; temp = temp->next) if (pci_filter_match(&filter, temp)) return temp; return NULL; } struct pci_dev *pci_card_find(uint16_t vendor, uint16_t device, uint16_t card_vendor, uint16_t card_device) { struct pci_dev *temp; struct pci_filter filter; pci_filter_init(NULL, &filter); filter.vendor = vendor; filter.device = device; for (temp = pacc->devices; temp; temp = temp->next) if (pci_filter_match(&filter, temp)) { if ((card_vendor == pci_read_word(temp, PCI_SUBSYSTEM_VENDOR_ID)) && (card_device == pci_read_word(temp, PCI_SUBSYSTEM_ID))) return temp; } return NULL; } int map_flash_registers(struct flashchip *flash) { volatile uint8_t *registers; size_t size = flash->total_size * 1024; registers = mmap(0, size, PROT_WRITE | PROT_READ, MAP_SHARED, fd_mem, (off_t) (0xFFFFFFFF - 0x400000 - size + 1)); if (registers == MAP_FAILED) { perror("Can't mmap registers using " MEM_DEV); exit(1); } flash->virtual_registers = registers; return 0; } struct flashchip *probe_flash(struct flashchip *first_flash, int force) { volatile uint8_t *bios; struct flashchip *flash; unsigned long base = 0, size; for (flash = first_flash; flash && flash->name; flash++) { if (chip_to_probe && strcmp(flash->name, chip_to_probe) != 0) continue; printf_debug("Probing for %s %s, %d KB: ", flash->vendor, flash->name, flash->total_size); if (!flash->probe && !force) { printf_debug("failed! flashrom has no probe function for this flash chip.\n"); continue; } size = flash->total_size * 1024; /* If getpagesize() > size -> * "Can't mmap memory using /dev/mem: Invalid argument" * This should never happen as we don't support any flash chips * smaller than 4k or 8k (yet). */ if (getpagesize() > size) { /* * if a flash size of 0 is mapped, we map a single page * so we can probe in that area whether we know the * vendor at least. */ size = getpagesize(); } base = flashbase ? flashbase : (0xffffffff - size + 1); bios = mmap(0, size, PROT_WRITE | PROT_READ, MAP_SHARED, fd_mem, (off_t) base); if (bios == MAP_FAILED) { perror("Can't mmap memory using " MEM_DEV); if (EINVAL == errno) { fprintf(stderr, "In Linux this error can be caused by the CONFIG_NONPROMISC_DEVMEM (<2.6.27),\n"); fprintf(stderr, "CONFIG_STRICT_DEVMEM (>=2.6.27) and CONFIG_X86_PAT kernel options.\n"); fprintf(stderr, "Please check if either is enabled in your kernel before reporting a failure.\n"); fprintf(stderr, "You can override CONFIG_X86_PAT at boot with the nopat kernel parameter but\n"); fprintf(stderr, "disabling the other option unfortunately requires a kernel recompile. Sorry!\n"); } exit(1); } flash->virtual_memory = bios; if (force) break; if (flash->probe(flash) != 1) goto notfound; if (first_flash == flashchips || flash->model_id != GENERIC_DEVICE_ID) break; notfound: munmap((void *)bios, size); } if (!flash || !flash->name) return NULL; printf("Found chip \"%s %s\" (%d KB) at physical address 0x%lx.\n", flash->vendor, flash->name, flash->total_size, base); flashbase = base; return flash; } int verify_flash(struct flashchip *flash, uint8_t *buf) { int idx; int total_size = flash->total_size * 1024; uint8_t *buf2 = (uint8_t *) calloc(total_size, sizeof(char)); if (flash->read == NULL) memcpy(buf2, (const char *)flash->virtual_memory, total_size); else flash->read(flash, buf2); printf("Verifying flash... "); if (verbose) printf("address: 0x00000000\b\b\b\b\b\b\b\b\b\b"); for (idx = 0; idx < total_size; idx++) { if (verbose && ((idx & 0xfff) == 0xfff)) printf("0x%08x", idx); if (*(buf2 + idx) != *(buf + idx)) { if (verbose) printf("0x%08x FAILED!", idx); else printf("FAILED at 0x%08x!", idx); printf(" Expected=0x%02x, Read=0x%02x\n", *(buf + idx), *(buf2 + idx)); return 1; } if (verbose && ((idx & 0xfff) == 0xfff)) printf("\b\b\b\b\b\b\b\b\b\b"); } if (verbose) printf("\b\b\b\b\b\b\b\b\b\b "); printf("VERIFIED. \n"); return 0; } #define MAX(a, b) ((a) > (b) ? (a) : (b)) #define POS_PRINT(x) do { pos += strlen(x); printf(x); } while (0) void print_supported_chips(void) { int okcol = 0, pos = 0; struct flashchip *f; for (f = flashchips; f->name != NULL; f++) { if (GENERIC_DEVICE_ID == f->model_id) continue; okcol = MAX(okcol, strlen(f->vendor) + 1 + strlen(f->name)); } okcol = (okcol + 7) & ~7; POS_PRINT("Supported flash chips:"); while (pos < okcol) { printf("\t"); pos += 8 - (pos % 8); } printf("Tested OK operations:\tKnown BAD operations:\n\n"); for (f = flashchips; f->name != NULL; f++) { printf("%s %s", f->vendor, f->name); pos = strlen(f->vendor) + 1 + strlen(f->name); while (pos < okcol) { printf("\t"); pos += 8 - (pos % 8); } if ((f->tested & TEST_OK_MASK)) { if ((f->tested & TEST_OK_PROBE)) POS_PRINT("PROBE "); if ((f->tested & TEST_OK_READ)) POS_PRINT("READ "); if ((f->tested & TEST_OK_ERASE)) POS_PRINT("ERASE "); if ((f->tested & TEST_OK_WRITE)) POS_PRINT("WRITE"); } while (pos < okcol + 24) { printf("\t"); pos += 8 - (pos % 8); } if ((f->tested & TEST_BAD_MASK)) { if ((f->tested & TEST_BAD_PROBE)) printf("PROBE "); if ((f->tested & TEST_BAD_READ)) printf("READ "); if ((f->tested & TEST_BAD_ERASE)) printf("ERASE "); if ((f->tested & TEST_BAD_WRITE)) printf("WRITE"); } printf("\n"); } } void usage(const char *name) { printf("usage: %s [-rwvEVfLhR] [-c chipname] [-s exclude_start]\n", name); printf(" [-e exclude_end] [-m [vendor:]part] [-l file.layout] [-i imagename] [file]\n"); printf (" -r | --read: read flash and save into file\n" " -w | --write: write file into flash\n" " -v | --verify: verify flash against file\n" " -E | --erase: erase flash device\n" " -V | --verbose: more verbose output\n" " -c | --chip : probe only for specified flash chip\n" " -s | --estart : exclude start position\n" " -e | --eend : exclude end postion\n" " -m | --mainboard <[vendor:]part>: override mainboard settings\n" " -f | --force: force write without checking image\n" " -l | --layout : read rom layout from file\n" " -i | --image : only flash image name from flash layout\n" " -L | --list-supported: print supported devices\n" " -h | --help: print this help text\n" " -R | --version: print the version (release)\n" "\n" " If no file is specified, then all that happens" " is that flash info is dumped.\n\n"); exit(1); } void print_version(void) { printf("flashrom r%s\n", FLASHROM_VERSION); } int main(int argc, char *argv[]) { uint8_t *buf; unsigned long size, numbytes; uint32_t erasedbytes; FILE *image; /* Probe for up to three flash chips. */ struct flashchip *flash, *flashes[3]; int opt; int option_index = 0; int force = 0; int read_it = 0, write_it = 0, erase_it = 0, verify_it = 0; int ret = 0, i; #ifdef __FreeBSD__ int io_fd; #endif static struct option long_options[] = { {"read", 0, 0, 'r'}, {"write", 0, 0, 'w'}, {"erase", 0, 0, 'E'}, {"verify", 0, 0, 'v'}, {"chip", 1, 0, 'c'}, {"estart", 1, 0, 's'}, {"eend", 1, 0, 'e'}, {"mainboard", 1, 0, 'm'}, {"verbose", 0, 0, 'V'}, {"force", 0, 0, 'f'}, {"layout", 1, 0, 'l'}, {"image", 1, 0, 'i'}, {"list-supported", 0, 0, 'L'}, {"help", 0, 0, 'h'}, {"version", 0, 0, 'R'}, {0, 0, 0, 0} }; char *filename = NULL; unsigned int exclude_start_position = 0, exclude_end_position = 0; // [x,y) char *tempstr = NULL, *tempstr2 = NULL; if (argc > 1) { /* Yes, print them. */ int i; printf_debug("The arguments are:\n"); for (i = 1; i < argc; ++i) printf_debug("%s\n", argv[i]); } setbuf(stdout, NULL); while ((opt = getopt_long(argc, argv, "rRwvVEfc:s:e:m:l:i:Lh", long_options, &option_index)) != EOF) { switch (opt) { case 'r': read_it = 1; break; case 'w': write_it = 1; break; case 'v': verify_it = 1; break; case 'c': chip_to_probe = strdup(optarg); break; case 'V': verbose = 1; break; case 'E': erase_it = 1; break; case 's': tempstr = strdup(optarg); sscanf(tempstr, "%x", &exclude_start_position); break; case 'e': tempstr = strdup(optarg); sscanf(tempstr, "%x", &exclude_end_position); break; case 'm': tempstr = strdup(optarg); strtok(tempstr, ":"); tempstr2 = strtok(NULL, ":"); if (tempstr2) { lb_vendor = tempstr; lb_part = tempstr2; } else { lb_vendor = NULL; lb_part = tempstr; } break; case 'f': force = 1; break; case 'l': tempstr = strdup(optarg); if (read_romlayout(tempstr)) exit(1); break; case 'i': tempstr = strdup(optarg); find_romentry(tempstr); break; case 'L': print_supported_chips(); print_supported_chipsets(); print_supported_boards(); exit(0); break; case 'R': print_version(); exit(0); break; case 'h': default: usage(argv[0]); break; } } if (read_it && write_it) { printf("Error: -r and -w are mutually exclusive.\n"); usage(argv[0]); } if (optind < argc) filename = argv[optind++]; /* First get full io access */ #if defined (__sun) && (defined(__i386) || defined(__amd64)) if (sysi86(SI86V86, V86SC_IOPL, PS_IOPL) != 0) { #elif defined(__FreeBSD__) if ((io_fd = open("/dev/io", O_RDWR)) < 0) { #else if (iopl(3) != 0) { #endif fprintf(stderr, "ERROR: Could not get IO privileges (%s).\nYou need to be root.\n", strerror(errno)); exit(1); } /* Initialize PCI access for flash enables */ pacc = pci_alloc(); /* Get the pci_access structure */ /* Set all options you want -- here we stick with the defaults */ pci_init(pacc); /* Initialize the PCI library */ pci_scan_bus(pacc); /* We want to get the list of devices */ /* Open the memory device UNCACHED. That's important for MMIO. */ if ((fd_mem = open(MEM_DEV, O_RDWR | O_SYNC)) < 0) { perror("Error: Can not access memory using " MEM_DEV ". You need to be root."); exit(1); } myusec_calibrate_delay(); /* We look at the lbtable first to see if we need a * mainboard specific flash enable sequence. */ coreboot_init(); /* try to enable it. Failure IS an option, since not all motherboards * really need this to be done, etc., etc. */ ret = chipset_flash_enable(); if (ret == -2) { printf("WARNING: No chipset found. Flash detection " "will most likely fail.\n"); } board_flash_enable(lb_vendor, lb_part); for (i = 0; i < ARRAY_SIZE(flashes); i++) { flashes[i] = probe_flash(i ? flashes[i - 1] + 1 : flashchips, 0); if (!flashes[i]) for (i++; i < ARRAY_SIZE(flashes); i++) flashes[i] = NULL; } if (flashes[1]) { printf("Multiple flash chips were detected:"); for (i = 0; i < ARRAY_SIZE(flashes) && flashes[i]; i++) printf(" %s", flashes[i]->name); printf("\nPlease specify which chip to use with the -c option.\n"); exit(1); } else if (!flashes[0]) { printf("No EEPROM/flash device found.\n"); if (!force || !chip_to_probe) { printf("If you know which flash chip you have, and if this version of flashrom\n"); printf("supports a similar flash chip, you can try to force read your chip. Run:\n"); printf("flashrom -f -r -c similar_supported_flash_chip filename\n"); printf("\n"); printf("Note: flashrom can never write when the flash chip isn't found automatically.\n"); } if (force && read_it && chip_to_probe) { printf("Force read (-f -r -c) requested, forcing chip probe success:\n"); flashes[0] = probe_flash(flashchips, 1); if (!flashes[0]) { printf("flashrom does not support a flash chip named '%s'.\n", chip_to_probe); printf("Run flashrom -L to view the hardware supported in this flashrom version.\n"); exit(1); } if (!filename) { printf("Error: No filename specified.\n"); exit(1); } size = flashes[0]->total_size * 1024; buf = (uint8_t *) calloc(size, sizeof(char)); if ((image = fopen(filename, "w")) == NULL) { perror(filename); exit(1); } printf("Force reading flash... "); if (!flashes[0]->read) memcpy(buf, (const char *)flashes[0]->virtual_memory, size); else flashes[0]->read(flashes[0], buf); if (exclude_end_position - exclude_start_position > 0) memset(buf + exclude_start_position, 0, exclude_end_position - exclude_start_position); numbytes = fwrite(buf, 1, size, image); fclose(image); printf("%s.\n", numbytes == size ? "done" : "FAILED"); free(buf); return numbytes != size; } // FIXME: flash writes stay enabled! exit(1); } flash = flashes[0]; if (TEST_OK_MASK != (flash->tested & TEST_OK_MASK)) { printf("===\n"); if (flash->tested & TEST_BAD_MASK) { printf("This flash part has status NOT WORKING for operations:"); if (flash->tested & TEST_BAD_PROBE) printf(" PROBE"); if (flash->tested & TEST_BAD_READ) printf(" READ"); if (flash->tested & TEST_BAD_ERASE) printf(" ERASE"); if (flash->tested & TEST_BAD_WRITE) printf(" WRITE"); printf("\n"); } if ((!(flash->tested & TEST_BAD_PROBE) && !(flash->tested & TEST_OK_PROBE)) || (!(flash->tested & TEST_BAD_READ) && !(flash->tested & TEST_OK_READ)) || (!(flash->tested & TEST_BAD_ERASE) && !(flash->tested & TEST_OK_ERASE)) || (!(flash->tested & TEST_BAD_WRITE) && !(flash->tested & TEST_OK_WRITE))) { printf("This flash part has status UNTESTED for operations:"); if (!(flash->tested & TEST_BAD_PROBE) && !(flash->tested & TEST_OK_PROBE)) printf(" PROBE"); if (!(flash->tested & TEST_BAD_READ) && !(flash->tested & TEST_OK_READ)) printf(" READ"); if (!(flash->tested & TEST_BAD_ERASE) && !(flash->tested & TEST_OK_ERASE)) printf(" ERASE"); if (!(flash->tested & TEST_BAD_WRITE) && !(flash->tested & TEST_OK_WRITE)) printf(" WRITE"); printf("\n"); } printf("Please email a report to flashrom@coreboot.org if any of the above operations\n"); printf("work correctly for you with this flash part. Please include the full output\n"); printf("from the program, including chipset found. Thank you for your help!\n"); printf("===\n"); } if (!(read_it | write_it | verify_it | erase_it)) { printf("No operations were specified.\n"); // FIXME: flash writes stay enabled! exit(1); } if (!filename && !erase_it) { printf("Error: No filename specified.\n"); // FIXME: flash writes stay enabled! exit(1); } size = flash->total_size * 1024; buf = (uint8_t *) calloc(size, sizeof(char)); if (erase_it) { printf("Erasing flash chip... "); if (NULL == flash->erase) { printf("FAILED!\n"); fprintf(stderr, "ERROR: flashrom has no erase function for this flash chip.\n"); return 1; } flash->erase(flash); if (NULL == flash->read) memcpy(buf, (const char *)flash->virtual_memory, size); else flash->read(flash, buf); for (erasedbytes = 0; erasedbytes <= size; erasedbytes++) if (0xff != buf[erasedbytes]) { printf("FAILED!\n"); fprintf(stderr, "ERROR at 0x%08x: Expected=0xff, Read=0x%02x\n", erasedbytes, buf[erasedbytes]); return 1; } printf("SUCCESS.\n"); return 0; } else if (read_it) { if ((image = fopen(filename, "w")) == NULL) { perror(filename); exit(1); } printf("Reading flash... "); if (flash->read == NULL) memcpy(buf, (const char *)flash->virtual_memory, size); else flash->read(flash, buf); if (exclude_end_position - exclude_start_position > 0) memset(buf + exclude_start_position, 0, exclude_end_position - exclude_start_position); numbytes = fwrite(buf, 1, size, image); fclose(image); printf("%s.\n", numbytes == size ? "done" : "FAILED"); if (numbytes != size) return 1; } else { struct stat image_stat; if ((image = fopen(filename, "r")) == NULL) { perror(filename); exit(1); } if (fstat(fileno(image), &image_stat) != 0) { perror(filename); exit(1); } if (image_stat.st_size != flash->total_size * 1024) { fprintf(stderr, "Error: Image size doesn't match\n"); exit(1); } numbytes = fread(buf, 1, size, image); show_id(buf, size, force); fclose(image); if (numbytes != size) { fprintf(stderr, "Error: Failed to read file. Got %ld bytes, wanted %ld!\n", numbytes, size); return 1; } } /* exclude range stuff. Nice idea, but at the moment it is only * supported in hardware by the pm49fl004 chips. * Instead of implementing this for all chips I suggest advancing * it to the rom layout feature below and drop exclude range * completely once all flash chips can do rom layouts. stepan */ // //////////////////////////////////////////////////////////// if (exclude_end_position - exclude_start_position > 0) memcpy(buf + exclude_start_position, (const char *)flash->virtual_memory + exclude_start_position, exclude_end_position - exclude_start_position); exclude_start_page = exclude_start_position / flash->page_size; if ((exclude_start_position % flash->page_size) != 0) { exclude_start_page++; } exclude_end_page = exclude_end_position / flash->page_size; // //////////////////////////////////////////////////////////// // This should be moved into each flash part's code to do it // cleanly. This does the job. handle_romentries(buf, (uint8_t *) flash->virtual_memory); // //////////////////////////////////////////////////////////// if (write_it) { if (!flash->write) { fprintf(stderr, "Error: flashrom has no write function for this flash chip.\n"); return 1; } ret |= flash->write(flash, buf); } if (verify_it) ret |= verify_flash(flash, buf); #ifdef __FreeBSD__ close(io_fd); #endif return ret; }