path: root/src/Kconfig

##
## This file is part of the coreboot project.
##
## Copyright (C) 2009-2010 coresystems GmbH
##
## This program is free software; you can redistribute it and/or modify
## it under the terms of the GNU General Public License as published by
## the Free Software Foundation; version 2 of the License.
##
## This program is distributed in the hope that it will be useful,
## but WITHOUT ANY WARRANTY; without even the implied warranty of
## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
## GNU General Public License for more details.
##
## You should have received a copy of the GNU General Public License
## along with this program; if not, write to the Free Software
## Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
##

mainmenu "Coreboot Configuration"

menu "General setup"

config EXPERT
	bool "Expert mode"
	help
	  This allows you to select certain advanced configuration options.

	  Warning: Only enable this option if you really know what you are
	  doing! You have been warned!

config LOCALVERSION
	string "Local version string"
	help
	  Append an extra string to the end of the coreboot version.

	  This can be useful if, for instance, you want to append the
	  respective board's hostname or some other identifying string to
	  the coreboot version number, so that you can easily distinguish
	  boot logs of different boards from each other.

config CBFS_PREFIX
	string "CBFS prefix to use"
	default "fallback"
	help
	  Select the prefix to all files put into the image. It's "fallback"
	  by default, "normal" is a common alternative.

choice
	prompt "Compiler"
	default COMPILER_GCC
	help
	  This option allows you to select the compiler used for building
	  coreboot.

config COMPILER_GCC
	bool "GCC"
config COMPILER_LLVM_CLANG
	bool "LLVM/clang"
endchoice

config SCANBUILD_ENABLE
	bool "Build with scan-build for static analysis"
	default n
	help
	  Changes the build process to scan-build is used.
	  Requires scan-build in path.

config SCANBUILD_REPORT_LOCATION
	string "Directory to put scan-build report in"
	default ""
	depends on SCANBUILD_ENABLE
	help
	  Where the scan-build report should be stored

config CCACHE
	bool "ccache"
	default n
	help
	  Enables the use of ccache for faster builds.
	  Requires ccache in path.

config USE_OPTION_TABLE
	bool "Use CMOS for configuration values"
	default n
	depends on HAVE_OPTION_TABLE
	help
	  Enable this option if coreboot shall read options from the "CMOS"
	  NVRAM instead of using hard coded values.

endmenu

source src/mainboard/Kconfig
source src/arch/i386/Kconfig

menu "Chipset"

comment "CPU"
source src/cpu/Kconfig
comment "Northbridge"
source src/northbridge/Kconfig
comment "Southbridge"
source src/southbridge/Kconfig
comment "Super I/O"
source src/superio/Kconfig
comment "Devices"
source src/devices/Kconfig

endmenu

menu "Generic Drivers"
source src/drivers/Kconfig
endmenu

config PCI_BUS_SEGN_BITS
	int
	default 0

config MAINBOARD_PCI_SUBSYSTEM_VENDOR_ID
	hex
	default 0x0

config MAINBOARD_PCI_SUBSYSTEM_DEVICE_ID
	hex
	default 0x0

config CPU_ADDR_BITS
	int
	default 36

config LOGICAL_CPUS
	bool
	default y

config PCI_ROM_RUN
	bool
	default n

config HEAP_SIZE
	hex
	default 0x4000

config MAX_CPUS
	int
	default 1

config MMCONF_SUPPORT_DEFAULT
	bool
	default n

config MMCONF_SUPPORT
	bool
	default n

config ATI_RAGE_XL
	bool

source src/console/Kconfig

config HAVE_ACPI_RESUME
	bool
	default n

config HAVE_ACPI_SLIC
	bool
	default n

config ACPI_SSDTX_NUM
	int
	default 0

config HAVE_HARD_RESET
	bool
	default y if BOARD_HAS_HARD_RESET
	default n
	help
	  This variable specifies whether a given board has a hard_reset
	  function, no matter if it's provided by board code or chipset code.

config HAVE_INIT_TIMER
	bool
	default n if UDELAY_IO
	default y

config HAVE_MAINBOARD_RESOURCES
	bool
	default n

config USE_OPTION_TABLE
	bool
	default n

config HAVE_OPTION_TABLE
	bool
	default n
	help
	  This variable specifies whether a given board has a cmos.layout
	  file containing NVRAM/CMOS bit definitions.
	  It defaults to 'n' but can be selected in mainboard/*/Kconfig.

config PIRQ_ROUTE
	bool
	default n

config HAVE_SMI_HANDLER
	bool
	default n

config PCI_IO_CFG_EXT
	bool
	default n

config IOAPIC
	bool
	default n

# TODO: Can probably be removed once all chipsets have kconfig options for it.
config VIDEO_MB
	int
	default 0

config USE_WATCHDOG_ON_BOOT
	bool
	default n

config VGA
	bool
	default n
	help
	  Build board-specific VGA code.

config GFXUMA
	bool
	default n
	help
	  Enable Unified Memory Architecture for graphics.

# TODO
# menu "Drivers"
#
# endmenu

#TODO Remove this option or make it useful.
config HAVE_LOW_TABLES
	bool
	default y
	help
	  This Option is unused in the code.  Since two boards try to set it to
	  'n', they may be broken.  We either need to make the option useful or
	  get rid of it.  The broken boards are:
	  asus/m2v-mx_se
	  supermicro/h8dme

config HAVE_HIGH_TABLES
	bool
	default y
	help
	  This variable specifies whether a given northbridge has high table
	  support.
	  It is set in northbridge/*/Kconfig.
	  Whether or not the high tables are actually written by coreboot is
	  configurable by the user via WRITE_HIGH_TABLES.

config HAVE_ACPI_TABLES
	bool
	help
	  This variable specifies whether a given board has ACPI table support.
	  It is usually set in mainboard/*/Kconfig.
	  Whether or not the ACPI tables are actually generated by coreboot
	  is configurable by the user via GENERATE_ACPI_TABLES.

config HAVE_MP_TABLE
	bool
	help
	  This variable specifies whether a given board has MP table support.
	  It is usually set in mainboard/*/Kconfig.
	  Whether or not the MP table is actually generated by coreboot
	  is configurable by the user via GENERATE_MP_TABLE.

config HAVE_PIRQ_TABLE
	bool
	help
	  This variable specifies whether a given board has PIRQ table support.
	  It is usually set in mainboard/*/Kconfig.
	  Whether or not the PIRQ table is actually generated by coreboot
	  is configurable by the user via GENERATE_PIRQ_TABLE.

#These Options are here to avoid "undefined" warnings.
#The actual selection and help texts are in the following menu.

config GENERATE_ACPI_TABLES
	bool
	default HAVE_ACPI_TABLES

config GENERATE_MP_TABLE
	bool
	default HAVE_MP_TABLE

config GENERATE_PIRQ_TABLE
	bool
	default HAVE_PIRQ_TABLE

config WRITE_HIGH_TABLES
	bool
	default HAVE_HIGH_TABLES

menu "System tables"

config WRITE_HIGH_TABLES
	bool "Write 'high' tables to avoid being overwritten in F segment"
	depends on HAVE_HIGH_TABLES
	default y

config MULTIBOOT
	bool "Generate Multiboot tables (for GRUB2)"
	default y

config GENERATE_ACPI_TABLES
	depends on HAVE_ACPI_TABLES
	bool "Generate ACPI tables"
	default y
	help
	  Generate ACPI tables for this board.

	  If unsure, say Y.

config GENERATE_MP_TABLE
	depends on HAVE_MP_TABLE
	bool "Generate an MP table"
	default y
	help
	  Generate an MP table (conforming to the Intel MultiProcessor
	  specification 1.4) for this board.

	  If unsure, say Y.

config GENERATE_PIRQ_TABLE
	depends on HAVE_PIRQ_TABLE
	bool "Generate a PIRQ table"
	default y
	help
	  Generate a PIRQ table for this board.

	  If unsure, say Y.

endmenu

menu "Payload"

choice
	prompt "Add a payload"
	default PAYLOAD_NONE

config PAYLOAD_NONE
	bool "None"
	help
	  Select this option if you want to create an "empty" coreboot
	  ROM image for a certain mainboard, i.e. a coreboot ROM image
	  which does not yet contain a payload.

	  For such an image to be useful, you have to use 'cbfstool'
	  to add a payload to the ROM image later.

config PAYLOAD_ELF
	bool "An ELF executable payload"
	help
	  Select this option if you have a payload image (an ELF file)
	  which coreboot should run as soon as the basic hardware
	  initialization is completed.

	  You will be able to specify the location and file name of the
	  payload image later.

endchoice

config FALLBACK_PAYLOAD_FILE
	string "Payload path and filename"
	depends on PAYLOAD_ELF
	default "payload.elf"
	help
	  The path and filename of the ELF executable file to use as payload.

# TODO: Defined if no payload? Breaks build?
config COMPRESSED_PAYLOAD_LZMA
	bool "Use LZMA compression for payloads"
	default y
	depends on PAYLOAD_ELF
	help
	  In order to reduce the size payloads take up in the ROM chip
	  coreboot can compress them using the LZMA algorithm.

config COMPRESSED_PAYLOAD_NRV2B
	bool
	default n

endmenu

menu "VGA BIOS"

config VGA_BIOS
	bool "Add a VGA BIOS image"
	help
	  Select this option if you have a VGA BIOS image that you would
	  like to add to your ROM.

	  You will be able to specify the location and file name of the
	  image later.

config FALLBACK_VGA_BIOS_FILE
	string "VGA BIOS path and filename"
	depends on VGA_BIOS
	default "vgabios.bin"
	help
	  The path and filename of the file to use as VGA BIOS.

config FALLBACK_VGA_BIOS_ID
	string "VGA device PCI IDs"
	depends on VGA_BIOS
	default "1106,3230"
	help
	  The comma-separated PCI vendor and device ID that would associate
	  your VGA BIOS to your video card.

	  Example: 1106,3230

	  In the above example 1106 is the PCI vendor ID (in hex, but without
	  the "0x" prefix) and 3230 specifies the PCI device ID of the
	  video card (also in hex, without "0x" prefix).

config INTEL_MBI
	bool "Add an MBI image"
	depends on NORTHBRIDGE_INTEL_I82830
	help
	  Select this option if you have an Intel MBI image that you would
	  like to add to your ROM.

	  You will be able to specify the location and file name of the
	  image later.

config FALLBACK_MBI_FILE
	string "Intel MBI path and filename"
	depends on INTEL_MBI
	default "mbi.bin"
	help
	  The path and filename of the file to use as VGA BIOS.

endmenu

menu "Bootsplash"
	depends on PCI_OPTION_ROM_RUN_YABEL

config BOOTSPLASH
	prompt "Show graphical bootsplash"
	bool
	depends on PCI_OPTION_ROM_RUN_YABEL
	help
	  This option shows a graphical bootsplash screen. The grapics are
	  loaded from the CBFS file bootsplash.jpg.

config FALLBACK_BOOTSPLASH_FILE
	string "Bootsplash path and filename"
	depends on BOOTSPLASH
	default "bootsplash.jpg"
	help
	  The path and filename of the file to use as graphical bootsplash
	  screen. The file format has to be jpg.

# TODO: Turn this into a "choice".
config FRAMEBUFFER_VESA_MODE
	prompt "VESA framebuffer video mode"
	hex
	default 0x117
	depends on BOOTSPLASH
	help
	  This option sets the resolution used for the coreboot framebuffer and
	  bootsplash screen. Set to 0x117 for 1024x768x16. A diligent soul will
	  some day make this a "choice".

config COREBOOT_KEEP_FRAMEBUFFER
	prompt "Keep VESA framebuffer"
	bool
	depends on BOOTSPLASH
	help
	  This option keeps the framebuffer mode set after coreboot finishes
	  execution. If this option is enabled, coreboot will pass a
	  framebuffer entry in its coreboot table and the payload will need a
	  framebuffer driver. If this option is disabled, coreboot will switch
	  back to text mode before handing control to a payload.

endmenu

menu "Debugging"

# TODO: Better help text and detailed instructions.
config GDB_STUB
	bool "GDB debugging support"
	default y
	help
	  If enabled, you will be able to set breakpoints for gdb debugging.
	  See src/arch/i386/lib/c_start.S for details.

config DEBUG_RAM_SETUP
	bool "Output verbose RAM init debug messages"
	default n
	depends on (NORTHBRIDGE_AMD_AMDFAM10 \
		 || NORTHBRIDGE_AMD_AMDK8 \
		 || NORTHBRIDGE_VIA_CN700 \
		 || NORTHBRIDGE_VIA_CX700 \
		 || NORTHBRIDGE_VIA_VX800 \
		 || NORTHBRIDGE_INTEL_E7501 \
		 || NORTHBRIDGE_INTEL_I440BX \
		 || NORTHBRIDGE_INTEL_I82810 \
		 || NORTHBRIDGE_INTEL_I82830 \
		 || NORTHBRIDGE_INTEL_I945)
	help
	  This option enables additional RAM init related debug messages.
	  It is recommended to enable this when debugging issues on your
	  board which might be RAM init related.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config DEBUG_PIRQ
	bool "Check PIRQ table consistency"
	default n
	depends on GENERATE_PIRQ_TABLE
	help
	  If unsure, say N.

config DEBUG_SMBUS
	bool "Output verbose SMBus debug messages"
	default n
	depends on (SOUTHBRIDGE_VIA_VT8237R \
		 || NORTHBRIDGE_VIA_VX800 \
		 || NORTHBRIDGE_VIA_CX700 \
		 || NORTHBRIDGE_AMD_AMDK8 \
		 || NORTHBRIDGE_AMD_AMDFAM10 \
		 || BOARD_LIPPERT_SPACERUNNER_LX \
		 || SOUTHBRIDGE_VIA_VT8231)
	help
	  This option enables additional SMBus (and SPD) debug messages.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config DEBUG_SMI
	bool "Output verbose SMI debug messages"
	default n
	depends on HAVE_SMI_HANDLER
	help
	  This option enables additional SMI related debug messages.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config DEBUG_SMM_RELOCATION
	bool "Debug SMM relocation code"
	default n
	depends on HAVE_SMI_HANDLER
	help
	  This option enables additional SMM handler relocation related
	  debug messages.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG
	bool "Output verbose x86emu debug messages"
	default n
	depends on PCI_OPTION_ROM_RUN_YABEL
	help
	  This option enables additional x86emu related debug messages.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_JMP
	bool "Trace JMP/RETF"
	default n
	depends on X86EMU_DEBUG
	help
	  Print information about JMP and RETF opcodes from x86emu.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_TRACE
	bool "Trace all opcodes"
	default n
	depends on X86EMU_DEBUG
	help
	  Print _all_ opcodes that are executed by x86emu.

	  WARNING: This will produce a LOT of output and take a long time.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_PNP
	bool "Log Plug&Play accesses"
	default n
	depends on X86EMU_DEBUG
	help
	  Print Plug And Play accesses made by option ROMs.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_DISK
	bool "Log Disk I/O"
	default n
	depends on X86EMU_DEBUG
	help
	  Print Disk I/O related messages.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_PMM
	bool "Log PMM"
	default n
	depends on X86EMU_DEBUG
	help
	  Print messages related to POST Memory Manager (PMM).

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.


config X86EMU_DEBUG_VBE
	bool "Debug VESA BIOS Extensions"
	default n
	depends on X86EMU_DEBUG
	help
	  Print messages related to VESA BIOS Extension (VBE) functions.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_INT10
	bool "Redirect INT10 output to console"
	default n
	depends on X86EMU_DEBUG
	help
	  Let INT10 (i.e. character output) calls print messages to debug output.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_INTERRUPTS
	bool "Log intXX calls"
	default n
	depends on X86EMU_DEBUG
	help
	  Print messages related to interrupt handling.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_CHECK_VMEM_ACCESS
	bool "Log special memory accesses"
	default n
	depends on X86EMU_DEBUG
	help
	  Print messages related to accesses to certain areas of the virtual
	  memory (e.g. BDA (BIOS Data Area) or interrupt vectors)

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_MEM
	bool "Log all memory accesses"
	default n
	depends on X86EMU_DEBUG
	help
	  Print memory accesses made by option ROM.
	  Note: This also includes accesses to fetch instructions.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config X86EMU_DEBUG_IO
	bool "Log IO accesses"
	default n
	depends on X86EMU_DEBUG
	help
	  Print I/O accesses made by option ROM.

	  Note: This option will increase the size of the coreboot image.

	  If unsure, say N.

config LLSHELL
	bool "Built-in low-level shell"
	default n
	help
	  If enabled, you will have a low level shell to examine your machine.
	  Put llshell() in your (romstage) code to start the shell.
	  See src/arch/i386/llshell/llshell.inc for details.

endmenu

config LIFT_BSP_APIC_ID
	bool
	default n

# These probably belong somewhere else, but they are needed somewhere.
config AP_CODE_IN_CAR
	bool
	default n

config ENABLE_APIC_EXT_ID
	bool
	default n

config WARNINGS_ARE_ERRORS
	bool
	default y

config ID_SECTION_OFFSET
	hex
	default 0x10

source src/Kconfig.deprecated_options