summaryrefslogtreecommitdiff
path: root/src/arch/arm/armv7/bootblock.S
blob: 47813a78f80ddf10fcc6f6d7680cf2e68655324d (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
/* SPDX-License-Identifier: GPL-2.0-only */
/*
 * This file is based off of the OMAP3530/ARM Cortex start.S file from Das
 * U-Boot, which itself got the file from armboot.
 */

/* Early initialization code for ARMv7 architecture. */

#include <arch/asm.h>

.arm
	/*
	 * Just in case the maskrom or the vendor basic firmware passes on a
	 * parameter when calling the bootblock, store it here for handling by C
	 * code.
	 */
	.section .bss, "aw" @nobits
	.global maskrom_param
maskrom_param:
	.word 0

ENTRY(_start)
	/*
	 * Set the CPU to System mode with IRQ and FIQ disabled. Prefetch/Data
	 * aborts may happen early and crash before the abort handlers are
	 * installed, but at least the problem will show up near the code that
	 * causes it.
	 */
	msr	cpsr_cxf, #0xdf
	bl	_thumb_start
ENDPROC(_start)

.thumb
ENTRY(_thumb_start)

	/* Preserve the maskrom passed value, if any */
	mov	r10, r0

	bl	arm_init_caches

	/*
	 * From Cortex-A Series Programmer's Guide:
	 * Only CPU 0 performs initialization. Other CPUs go into WFI
	 * to do this, first work out which CPU this is
	 * this code typically is run before any other initialization step
	 */
	mrc p15, 0, r1, c0, c0, 5	@ Read Multiprocessor Affinity Register
	and r1, r1, #0x3 @ Extract CPU ID bits
	cmp r1, #0
	bne wait_for_interrupt		@ If this is not core0, wait

	/*
	 * Initialize the stack to a known value. This is used to check for
	 * stack overflow later in the boot process.
	 */
	ldr	r0, =_stack
	ldr	r1, =_estack
	ldr	r2, =0xdeadbeef
init_stack_loop:
	str	r2, [r0]
	add	r0, #4
	cmp	r0, r1
	bne	init_stack_loop

	/* Set stackpointer in internal RAM */
	ldr	sp, =_estack

	/*
	 * For platforms where the flash is memory mapped (qemu), check if the
	 * bootblock needs to relocate itself.
	 */
check_position:
	adr	r0, check_position
	ldr	r1, =check_position

	cmp	r0, r1
	beq	call_bootblock

	/* Calculate source */
	ldr	r2, =_program
	sub	r1, r1, r2
	sub	r1, r0, r1
	/* Get destination */
	ldr	r0, =_program
	/* Get size */
	ldr	r2, =_eprogram
	sub	r2, r2, r0

	bl	memcpy

	/* Get absolute address */
	ldr	lr, =call_bootblock
	/* Directly modify pc as branch instruction changes the state */
	mov	pc, lr

call_bootblock:

	/* Restore parameter passed in by maskrom/vendor firmware. */
	ldr	r0, =maskrom_param
	str	r10, [r0]

	ldr	r0,=0x00000000
	/*
	 * The current design of cpu_info places the struct at the top of the
	 * stack. Free enough space to accommodate for that, but make sure it's
	 * 8-byte aligned for ABI compliance.
	 */
	sub	sp, sp, #16
	bl	main

wait_for_interrupt:
	wfi
	mov	pc, lr			@ back to my caller
ENDPROC(_thumb_start)