summaryrefslogtreecommitdiff
path: root/src/cpu/allwinner/a10/clock.c
blob: 9e4e93dfe1d6dd8e3657c2784fe7f422311aac02 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2013  Alexandru Gagniuc <mr.nuke.me@gmail.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License  or (at your option)
 * any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * Helpers for clock control and gating on Allwinner CPUs
 */

#include "clock.h"

#include <device/mmio.h>
#include <console/console.h>
#include <delay.h>
#include <lib.h>

static struct a10_ccm *const ccm = (void *)A1X_CCM_BASE;

/**
 * \brief Enable the clock source for the peripheral
 *
 * @param[in] periph peripheral and clock type to enable @see a1x_clken
 */
void a1x_periph_clock_enable(enum a1x_clken periph)
{
	void *addr;
	u32 reg32;

	addr = (void *)A1X_CCM_BASE + (periph >> 5);
	reg32 = read32(addr);
	reg32 |= 1 << (periph & 0x1f);
	write32(addr, reg32);
}

/**
 * \brief Disable the clock source for the peripheral
 *
 * @param[in] periph peripheral and clock type to disable @see a1x_clken
 */
void a1x_periph_clock_disable(enum a1x_clken periph)
{
	void *addr;
	u32 reg32;

	addr = (void *)A1X_CCM_BASE + (periph >> 5);
	reg32 = read32(addr);
	reg32 &= ~(1 << (periph & 0x1f));
	write32(addr, reg32);
}

/**
 * \brief Configure PLL5 factors
 *
 * This is a low-level accessor to configure the divisors and multipliers of
 * PLL5. PLL5 uses two factors to multiply the 24MHz oscillator clock to
 * generate a pre-clock. The pre-divided clock is then divided by one of two
 * independent divisors, one for DRAM, and another for peripherals clocked from
 * this PLL. If the PLL was previously disabled, this function will enable it.
 * Other than that, this function only modifies these factors, and leaves the
 * other settings unchanged.
 *
 * The output clocks are given by the following formulas:
 *
 * Pre-clock    = (24 MHz * N * K) <- Must be between 240MHz and 2GHz
 * DRAM clock   = pre / M
 * Other module = pre / P
 *
 * It is the caller's responsibility to make sure the pre-divided clock falls
 * within the operational range of the PLL, and that the divisors and
 * multipliers are within their ranges.
 *
 * @param[in] mul_n Multiplier N, between 0 and 32
 * @param[in] mul_k Multiplier K, between 1 and 4
 * @param[in] div_m DRAM clock divisor, between 1 and 4
 * @param[in] exp_div_p Peripheral clock divisor exponent, between 0 and 3
 *			(P = 1/2/4/8, respectively)
 */
void a1x_pll5_configure(u8 mul_n, u8 mul_k, u8 div_m, u8 exp_div_p)
{
	u32 reg32;

	reg32 = read32(&ccm->pll5_cfg);
	reg32 &= ~(PLL5_FACTOR_M_MASK | PLL5_FACTOR_N_MASK |
		   PLL5_FACTOR_K_MASK | PLL5_DIV_EXP_P_MASK);
	/* The M1 factor is not documented in the datasheet, and the reference
	 * raminit code does not use it. Whether this is a fractional divisor,
	 * or an additional divisor is unknown, so don't use it for now */
	reg32 &= ~PLL5_FACTOR_M1_MASK;
	reg32 |= (PLL5_FACTOR_M(div_m) | PLL5_FACTOR_N(mul_n) |
		  PLL5_FACTOR_K(mul_k) | PLL5_DIV_EXP_P(exp_div_p));
	reg32 |= PLL5_PLL_ENABLE;
	write32(&ccm->pll5_cfg, reg32);
}

/**
 * \brief Enable the clock output to DRAM chips
 *
 * This enables the DRAM clock to be sent to DRAM chips. This should normally be
 * done after PLL5 is configured and locked. Note that the clock may be gated,
 * and also needs to be ungated in order to reach the DDR chips.
 * Also see @ref clock_ungate_dram_clk_output
 */
void a1x_pll5_enable_dram_clock_output(void)
{
	setbits_le32(&ccm->pll5_cfg, PLL5_DDR_CLK_OUT_EN);
}

/**
 * \brief Ungate the clock to DRAM chips
 *
 * Although the DRAM clock output may be enabled, it is by default gated. It
 * needs to be ungated before reaching DRAM.
 */
void a1x_ungate_dram_clock_output(void)
{
	setbits_le32(&ccm->dram_clk_cfg, DRAM_CTRL_DCLK_OUT);
}

/**
 * \brief Gate the clock to DRAM chips
 *
 * Disable the clock to DRAM without altering PLL configuration, by closing the
 * DRAM clock gate.
 */
void a1x_gate_dram_clock_output(void)
{
	clrbits_le32(&ccm->dram_clk_cfg, DRAM_CTRL_DCLK_OUT);
}

/*
 * Linker doesn't garbage collect and the function below adds about half
 * kilobyte to the bootblock, and log2_ceil is not available in the bootblock.
 */
#ifndef __BOOTBLOCK__

#define PLL1_CFG(N, K, M, P_EXP)	\
	((1 << 31 | 0 << 30 | 8 << 26 | 0 << 25 | 16 << 20 | 2 << 13) | \
	(P_EXP) << 16 |  (N) << 8 | \
	(K - 1) << 4 | 0 << 3 | 0 << 2 | (M -1) << 0)

static const struct {
	u32 pll1_cfg;
	u16 freq_mhz;
} pll1_table[] = {
	/* PLL1 output = (24MHz * N * K) / (M * P) */
	{ PLL1_CFG(16, 1, 1, 0),  384 },
	{ PLL1_CFG(16, 2, 1, 0),  768 },
	{ PLL1_CFG(20, 2, 1, 0),  960 },
	{ PLL1_CFG(21, 2, 1, 0), 1008 },
	{ PLL1_CFG(22, 2, 1, 0), 1056 },
	{ PLL1_CFG(23, 2, 1, 0), 1104 },
	{ PLL1_CFG(24, 2, 1, 0), 1152 },
	{ PLL1_CFG(25, 2, 1, 0), 1200 },
	{ PLL1_CFG(26, 2, 1, 0), 1248 },
	{ PLL1_CFG(27, 2, 1, 0), 1296 },
	{ PLL1_CFG(28, 2, 1, 0), 1344 },
	{ PLL1_CFG(29, 2, 1, 0), 1392 },
	{ PLL1_CFG(30, 2, 1, 0), 1440 },
	{ PLL1_CFG(31, 2, 1, 0), 1488 },
	{ PLL1_CFG(20, 4, 1, 0), 1944 },
};

static void cpu_clk_src_switch(u32 clksel_bits)
{
	u32 reg32;

	reg32 = read32(&ccm->cpu_ahb_apb0_cfg);
	reg32 &= ~CPU_CLK_SRC_MASK;
	reg32 |= clksel_bits & CPU_CLK_SRC_MASK;
	write32(&ccm->cpu_ahb_apb0_cfg, reg32);
}

static void change_sys_divisors(u8 axi, u8 ahb_exp, u8 apb0_exp)
{
	u32 reg32;

	reg32 = read32(&ccm->cpu_ahb_apb0_cfg);
	/* Not a typo: We want to keep only the CLK_SRC bits */
	reg32 &= CPU_CLK_SRC_MASK;
	reg32 |= ((axi - 1) << 0) & AXI_DIV_MASK;
	reg32 |= (ahb_exp << 4) & AHB_DIV_MASK;
	reg32 |= (apb0_exp << 8) & APB0_DIV_MASK;
	write32(&ccm->cpu_ahb_apb0_cfg, reg32);
}

static void spin_delay(u32 loops)
{
	volatile u32 x = loops;
	while (x--);
}

/**
 * \brief Configure the CPU clock and PLL1
 *
 * To run at full speed, the CPU uses PLL1 as the clock source. AXI, AHB, and
 * APB0 are derived from the CPU clock, and need to be kept within certain
 * limits. This function configures PLL1 as close as possible to the desired
 * frequency, based on a set of known working configurations for PLL1. It then
 * calculates and applies the appropriate divisors for the AXI/AHB/APB0 clocks,
 * before finally switching the CPU to run from the new clock.
 * No further configuration of the CPU clock or divisors is needed. after
 * calling this function.
 *
 * @param[in] cpu_clk_mhz Desired CPU clock, in MHz
 */
void a1x_set_cpu_clock(u16 cpu_clk_mhz)
{
	int i = 0;
	u8 axi, ahb, ahb_exp, apb0, apb0_exp;
	u32 actual_mhz;

	/*
	 * Rated clock for PLL1 is 2000 MHz, but there is no combination of
	 * parameters that yields that exact frequency. 1944 MHz is the highest.
	 */
	if (cpu_clk_mhz > 1944) {
		printk(BIOS_CRIT, "BUG! maximum PLL1 clock is 1944 MHz,"
				  "but asked to clock CPU at %d MHz\n",
				  cpu_clk_mhz);
		cpu_clk_mhz = 1944;
	}
	/* Find target frequency */
	while (pll1_table[i].freq_mhz < cpu_clk_mhz)
		i++;

	actual_mhz = pll1_table[i].freq_mhz;

	if (cpu_clk_mhz != actual_mhz) {
		printk(BIOS_WARNING, "Parameters for %d MHz not available, "
				     "setting CPU clock at %d MHz\n",
				     cpu_clk_mhz, actual_mhz);
	}

	/*
	 * Calculate system clock divisors:
	 * The minimum clock divisor for APB0 is 2, which guarantees that AHB0
	 * will always be in spec, as long as AHB is in spec, although the max
	 * AHB0 clock we can get is 125 MHz
	 */
	axi = DIV_ROUND_UP(actual_mhz, 450);		/* Max 450 MHz */
	ahb = DIV_ROUND_UP(actual_mhz/axi, 250);	/* Max 250 MHz */
	apb0 = 2;					/* Max 150 MHz */

	ahb_exp = log2_ceil(ahb);
	ahb = 1 << ahb_exp;
	apb0_exp = 1;

	printk(BIOS_INFO, "CPU: %d MHz, AXI %d Mhz, AHB: %d MHz APB0: %d MHz\n",
			  actual_mhz,
			  actual_mhz / axi,
			  actual_mhz / (axi * ahb),
			  actual_mhz / (axi * ahb * apb0));

	/* Keep the CPU off PLL1 while we change PLL parameters */
	cpu_clk_src_switch(CPU_CLK_SRC_OSC24M);
	/*
	 * We can't use udelay() here. udelay() relies on timer 0, but timers
	 * have the habit of not ticking when the CPU is clocked from the main
	 * oscillator.
	 */
	spin_delay(8);

	change_sys_divisors(axi, ahb_exp, apb0_exp);

	/* Configure PLL1 at the desired frequency */
	write32(&ccm->pll1_cfg, pll1_table[i].pll1_cfg);
	spin_delay(8);

	cpu_clk_src_switch(CPU_CLK_SRC_PLL1);
	/* Here, we're running from PLL, so timers will tick */
	udelay(1);
}

#endif  /* __BOOTBLOCK__ */