1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
|
/*
* Uart setup helpers for Allwinner SoCs
*
* Copyright (C) 2013 Alexandru Gagniuc <mr.nuke.me@gmail.com>
* Subject to the GNU GPL v2, or (at your option) any later version.
*/
#include "uart.h"
#include <arch/io.h>
#include <console/uart.h>
#include <drivers/uart/uart8250reg.h>
/**
* \brief Configure line control settings for UART
*/
static void a10_uart_configure(struct a10_uart *uart, u32 baud_rate, u8 data_bits,
enum uart_parity parity, u8 stop_bits)
{
u32 reg32;
u16 div;
div = (u16) uart_baudrate_divisor(baud_rate,
uart_platform_refclk(), 16);
/* Enable access to Divisor Latch register */
writel(UART8250_LCR_DLAB, &uart->lcr);
/* Set baudrate */
writel((div >> 8) & 0xff, &uart->dlh);
writel(div & 0xff, &uart->dll);
/* Set line control */
reg32 = (data_bits - 5) & UART8250_LCR_WLS_MSK;
switch (parity) {
case UART_PARITY_ODD:
reg32 |= UART8250_LCR_PEN;
break;
case UART_PARITY_EVEN:
reg32 |= UART8250_LCR_PEN;
reg32 |= UART8250_LCR_EPS;
break;
case UART_PARITY_NONE: /* Fall through */
default:
break;
}
writel(reg32, &uart->lcr);
}
static void a10_uart_enable_fifos(struct a10_uart *uart)
{
writel(UART8250_FCR_FIFO_EN, &uart->fcr);
}
static int tx_fifo_full(struct a10_uart *uart)
{
/* This may be a misnomer, or a typo in the datasheet. THRE indicates
* that the TX register is empty, not that the FIFO is not full, but
* this may be due to a datasheet typo. Keep the current name to signal
* intent. */
return !(read32(&uart->lsr) & UART8250_LSR_THRE);
}
static int rx_fifo_empty(struct a10_uart *uart)
{
return !(read32(&uart->lsr) & UART8250_LSR_DR);
}
/**
* \brief Read a single byte from the UART.
*
* Blocks until at least a byte is available.
*/
static u8 a10_uart_rx_blocking(struct a10_uart *uart)
{
while (rx_fifo_empty(uart)) ;
return read32(&uart->rbr);
}
/**
* \brief Write a single byte to the UART.
*
* Blocks until there is space in the FIFO.
*/
static void a10_uart_tx_blocking(struct a10_uart *uart, u8 data)
{
while (tx_fifo_full(uart)) ;
return writel(data, &uart->thr);
}
void uart_init(int idx)
{
struct a10_uart *uart_base = uart_platform_baseptr(idx);
/* Use default 8N1 encoding */
a10_uart_configure(uart_base, default_baudrate(),
8, UART_PARITY_NONE, 1);
a10_uart_enable_fifos(uart_base);
}
unsigned char uart_rx_byte(int idx)
{
return a10_uart_rx_blocking(uart_platform_baseptr(idx));
}
void uart_tx_byte(int idx, unsigned char data)
{
a10_uart_tx_blocking(uart_platform_baseptr(idx), data);
}
void uart_tx_flush(int idx)
{
}
|
