1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
|
/* 2005.6 by yhlu
* 2006.3 yhlu add copy data from CAR to ram
*/
#include <string.h>
#include <arch/stages.h>
#include "cpu/amd/car/disable_cache_as_ram.c"
static inline void print_debug_pcar(const char *strval, uint32_t val)
{
printk(BIOS_DEBUG, "%s%08x\n", strval, val);
}
/* from linux kernel 2.6.32 asm/string_32.h */
static void inline __attribute__((always_inline)) memcopy(void *dest, const void *src, unsigned long bytes)
{
int d0, d1, d2;
asm volatile("cld ; rep ; movsl\n\t"
"movl %4,%%ecx\n\t"
"andl $3,%%ecx\n\t"
"jz 1f\n\t"
"rep ; movsb\n\t"
"1:"
: "=&c" (d0), "=&D" (d1), "=&S" (d2)
: "0" (bytes / 4), "g" (bytes), "1" ((long)dest), "2" ((long)src)
: "memory", "cc");
}
/* Disable Erratum 343 Workaround, see RevGuide for Fam10h, Pub#41322 Rev 3.33 */
static void vErrata343(void)
{
#ifdef BU_CFG2_MSR
msr_t msr;
unsigned int uiMask = 0xFFFFFFF7;
msr = rdmsr(BU_CFG2_MSR);
msr.hi &= uiMask; // set bit 35 to 0
wrmsr(BU_CFG2_MSR, msr);
#endif
}
static void post_cache_as_ram(void)
{
#if 1
{
/* Check value of esp to verify if we have enough rom for stack in Cache as RAM */
unsigned v_esp;
__asm__ volatile (
"movl %%esp, %0\n\t"
: "=a" (v_esp)
);
print_debug_pcar("v_esp=", v_esp);
}
#endif
unsigned testx = 0x5a5a5a5a;
print_debug_pcar("testx = ", testx);
/* copy data from cache as ram to
ram need to set CONFIG_RAMTOP to 2M and use var mtrr instead.
*/
#if CONFIG_RAMTOP <= 0x100000
#error "You need to set CONFIG_RAMTOP greater than 1M"
#endif
/* So we can access RAM from [1M, CONFIG_RAMTOP) */
set_var_mtrr(0, 0x00000000, CONFIG_RAMTOP, MTRR_TYPE_WRBACK);
// dump_mem(CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x8000, CONFIG_DCACHE_RAM_BASE+CONFIG_DCACHE_RAM_SIZE-0x7c00);
print_debug("Copying data from cache to RAM -- switching to use RAM as stack... ");
/* from here don't store more data in CAR */
vErrata343();
memcopy((void *)((CONFIG_RAMTOP)-CONFIG_DCACHE_RAM_SIZE), (void *)CONFIG_DCACHE_RAM_BASE, CONFIG_DCACHE_RAM_SIZE); //inline
// dump_mem((CONFIG_RAMTOP) - 0x8000, (CONFIG_RAMTOP) - 0x7c00);
__asm__ volatile (
/* set new esp */ /* before CONFIG_RAMBASE */
"subl %0, %%esp\n\t"
::"a"( (CONFIG_DCACHE_RAM_BASE + CONFIG_DCACHE_RAM_SIZE)- (CONFIG_RAMTOP) )
/* discard all registers (eax is used for %0), so gcc redo everything
after the stack is moved */
: "cc", "memory", "%ebx", "%ecx", "%edx", "%esi", "%edi", "%ebp"
);
/* We can put data to stack again */
/* only global variable sysinfo in cache need to be offset */
print_debug("Done\n");
print_debug_pcar("testx = ", testx);
print_debug("Disabling cache as ram now \n");
disable_cache_as_ram_bsp();
print_debug("Clearing initial memory region: ");
#if CONFIG_HAVE_ACPI_RESUME == 1
/* clear only coreboot used region of memory. Note: this may break ECC enabled boards */
memset((void*) CONFIG_RAMBASE, 0, (CONFIG_RAMTOP) - CONFIG_RAMBASE - CONFIG_DCACHE_RAM_SIZE);
#else
memset((void*)0, 0, ((CONFIG_RAMTOP) - CONFIG_DCACHE_RAM_SIZE));
#endif
print_debug("Done\n");
// dump_mem((CONFIG_RAMTOP) - 0x8000, (CONFIG_RAMTOP) - 0x7c00);
set_sysinfo_in_ram(1); // So other core0 could start to train mem
#if CONFIG_MEM_TRAIN_SEQ == 1
// struct sys_info *sysinfox = ((CONFIG_RAMTOP) - CONFIG_DCACHE_RAM_GLOBAL_VAR_SIZE);
// wait for ap memory to trained
// wait_all_core0_mem_trained(sysinfox); // moved to lapic_init_cpus.c
#endif
/*copy and execute coreboot_ram */
copy_and_run(0);
/* We will not return */
print_debug("should not be here -\n");
}
|