summaryrefslogtreecommitdiff
path: root/src/cpu/amd/family_10h-family_15h/fidvid.c
blob: 0e51a0c597095522ab6d67baf3c2864f62de2cc4 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2007 Advanced Micro Devices, Inc.
 * Copyright (C) 2015 Timothy Pearson <tpearson@raptorengineeringinc.com>, Raptor Engineering
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */
/*
 * This file initializes the CPU cores for voltage and frequency settings
 * in the different power states.
 */
/*

checklist (functions are in this file if no source file named)
Fam10 Bios and Kernel Development Guide #31116, rev 3.48, April 22, 2010

2.4.2.6 Requirements for p-states

1.- F3x[84:80] According to table 100 : prep_fid_change

2.- COF/VID :
     2.4.2.9.1 Steps 1,3-6 and warning for 2,7 if they apply
	       fixPsNbVidBeforeWR(...)
     2.4.2.9.1 Step 8 enable_fid_change
	       We do this for all nodes, I don't understand BKDG 100% on
	       whether this is or isn't meant by "on the local
	       processor". Must be OK.
     2.4.2.9.1 Steps 9-10 (repeat 1-7 and reset) romstage.c/init_cpus ?
     2.4.2.9.1 Steps 11-12 init_fidvid_stage2
     2.4.2.9.2 DualPlane PVI : Not supported, don't know how to detect,
	       needs specific circuitry.

3.-  2.4.2.7 dualPlaneOnly(dev)

4.-  2.4.2.8 applyBoostFIDOffset(dev, nodeid)

5.-  enableNbPState1(dev)

6.- 2.4.1.7
    a) UpdateSinglePlaneNbVid()
    b) setVSRamp(), called from  prep_fid_change
    c) prep_fid_change
    d) improperly, for lack of voltage regulator details?,
	F3xA0[PsiVidEn] in defaults.h
	F3xA0[PsiVid] in init_cpus.c AMD_SetupPSIVID_d (before prep_fid_change)

7.- TODO (Core Performance Boost is only available in revision E cpus, and we
	  don't seem to support those yet, at least they don't have any
	  constant in amddefs.h )

8.- FIXME ? Transition to min Pstate according to 2.4.2.15.3 is required
    by 2.4.2.6 after warm reset. But 2.4.2.15 states that it is not required
    if the warm reset is issued by coreboot to update NbFid. So it is required
    or not ? How can I tell who issued warm reset ?
    Coreboot transitions to P0 instead, which is not recommended, and does
    not follow 2.4.2.15.2 to do so.

9.- TODO Requires information on current delivery capability
    (depends on mainboard and maybe power supply ?). One might use a config
    option with the maximum number of Amperes that the board can deliver to CPU.

10.- [Multiprocessor] TODO 2.4.2.12
     [Uniprocessor] FIXME ? We call setPStateMaxVal() in init_fidvid_stage2,
     but not sure this is what is meant by "Determine the valid set of
     P-states based on enabled P-states indicated
     in MSRC001_00[68:64][PstateEn]" in 2.4.2.6-10

11.- finalPstateChange() from init_fidvid_Stage2 (BKDG says just "may", anyway)

12.- generate ACPI for p-states.
     generated in powernow_acpi.c amd_generate_powernow()

"must also be completed"

a.-  PllLockTime set in ruleset in defaults.h
     BKDG says set it "If MSRC001_00[68:64][CpuFid] is different between
     any two enabled P-states", but since it does not say "only if"
     I guess it is safe to do it always.

b.-  prep_fid_change(...)

 */

#if CONFIG_SET_FIDVID

#include <northbridge/amd/amdht/AsPsDefs.h>

static inline void print_debug_fv(const char *str, u32 val)
{
#if CONFIG_SET_FIDVID_DEBUG
	printk(BIOS_DEBUG, "%s%x\n", str, val);
#endif
}

static inline void print_debug_fv_8(const char *str, u8 val)
{
#if CONFIG_SET_FIDVID_DEBUG
	printk(BIOS_DEBUG, "%s%02x\n", str, val);
#endif
}

static inline void print_debug_fv_64(const char *str, u32 val, u32 val2)
{
#if CONFIG_SET_FIDVID_DEBUG
	printk(BIOS_DEBUG, "%s%x%x\n", str, val, val2);
#endif
}

struct fidvid_st {
	u32 common_fid;
};

static void enable_fid_change(u8 fid)
{
	u32 dword;
	u32 nodes;
	pci_devfn_t dev;
	int i;

	nodes = get_nodes();

	for (i = 0; i < nodes; i++) {
		dev = NODE_PCI(i, 3);
		dword = pci_read_config32(dev, 0xd4);
		dword &= ~0x1F;
		dword |= (u32) fid & 0x1F;
		dword |= 1 << 5;	// enable
		pci_write_config32(dev, 0xd4, dword);
		printk(BIOS_DEBUG, "FID Change Node:%02x, F3xD4: %08x\n", i,
		       dword);
	}
}

static void applyBoostFIDOffset(pci_devfn_t dev, uint32_t nodeid)
{
	// BKDG 2.4.2.8
	// Fam10h revision E only, but E is apparently not supported yet, therefore untested
	if ((cpuid_edx(0x80000007) & CPB_MASK)
		&&  ((cpuid_ecx(0x80000008) & NC_MASK) == 5) ) {
		u32 core =  get_node_core_id_x().coreid;
		u32 asymetricBoostThisCore = ((pci_read_config32(dev, 0x10C) >> (core*2))) & 3;
		msr_t msr =  rdmsr(PS_REG_BASE);
		u32 cpuFid = msr.lo & PS_CPU_FID_MASK;
		cpuFid = cpuFid + asymetricBoostThisCore;
		msr.lo &=   ~PS_CPU_FID_MASK;
		msr.lo |= cpuFid;
		wrmsr(PS_REG_BASE , msr);
	} else if (is_fam15h()) {
		uint32_t dword = pci_read_config32(NODE_PCI(nodeid, 4), 0x15c);
		uint8_t boost_count = (dword >> 2) & 0x7;
		if (boost_count > 0) {
			/* Enable boost */
			dword &= ~0x3;
			dword |= 0x1;
			pci_write_config32(NODE_PCI(nodeid, 4), 0x15c, dword);
		}
	}
}

static void enableNbPState1(pci_devfn_t dev)
{
	uint64_t cpuRev =  mctGetLogicalCPUID(0xFF);
	if (cpuRev & AMD_FAM10_C3) {
		u32 nbPState = (pci_read_config32(dev, 0x1F0) & NB_PSTATE_MASK);
		if ( nbPState){
			u32 nbVid1 = (pci_read_config32(dev, 0x1F4) & NB_VID1_MASK) >> NB_VID1_SHIFT;
			u32 i;
			for (i = nbPState; i < NM_PS_REG; i++) {
				msr_t msr =  rdmsr(PS_REG_BASE + i);
				if (msr.hi &  PS_EN_MASK ) {
				msr.hi |= NB_DID_M_ON;
				msr.lo &= NB_VID_MASK_OFF;
				msr.lo |= ( nbVid1 << NB_VID_POS);
				wrmsr(PS_REG_BASE + i, msr);
				}
			}
		}
	}
}

static u8 setPStateMaxVal(pci_devfn_t dev)
{
	u8 i, maxpstate=0;
	for (i = 0; i < NM_PS_REG; i++) {
		msr_t msr = rdmsr(PS_REG_BASE + i);
		if (msr.hi & PS_IDD_VALUE_MASK) {
			msr.hi |= PS_EN_MASK;
			wrmsr(PS_REG_BASE + i, msr);
		}
		if (msr.hi & PS_EN_MASK) {
			maxpstate = i;
		}
	}
	//FIXME: CPTC2 and HTC_REG should get max per node, not per core ?
	u32 reg = pci_read_config32(dev, CPTC2);
	reg &= PS_MAX_VAL_MASK;
	reg |= (maxpstate << PS_MAX_VAL_POS);
	pci_write_config32(dev, CPTC2,reg);
	return maxpstate;
}

static void dualPlaneOnly(pci_devfn_t dev)
{
	// BKDG 2.4.2.7

	uint64_t cpuRev = mctGetLogicalCPUID(0xFF);
	if ((mctGetProcessorPackageType() == AMD_PKGTYPE_AM3_2r2)
		&& (cpuRev & (AMD_DR_Cx | AMD_DR_Ex))) {
		if ((pci_read_config32(dev, 0x1FC) & DUAL_PLANE_ONLY_MASK)
			&& (pci_read_config32(dev, 0xA0) & PVI_MODE)) {
			if (cpuid_edx(0x80000007) & CPB_MASK) {
				// revision E only, but E is apparently not supported yet, therefore untested
				msr_t minPstate = rdmsr(0xC0010065);
				wrmsr(0xC0010065, rdmsr(0xC0010068));
				wrmsr(0xC0010068, minPstate);
			} else {
				msr_t msr;
				msr.lo=0; msr.hi=0;
				wrmsr(0xC0010064, rdmsr(0xC0010068) );
				wrmsr(0xC0010068, msr);
			}

			//FIXME: CPTC2 and HTC_REG should get max per node, not per core ?
			u8 maxpstate = setPStateMaxVal(dev);

			u32 reg = pci_read_config32(dev, HTC_REG);
			reg &= HTC_PS_LMT_MASK;
			reg |= (maxpstate << PS_LIMIT_POS);
			pci_write_config32(dev, HTC_REG,reg);
		}
	}
}

static int vidTo100uV(u8 vid)
{
	// returns voltage corresponding to vid in tenths of mV, i.e. hundreds of uV
	// BKDG #31116 rev 3.48 2.4.1.6
	int voltage;
	if (vid >= 0x7c) {
		voltage = 0;
	} else {
		voltage = (15500 - (125*vid));
	}
	return voltage;
}

static void setVSRamp(pci_devfn_t dev)
{
	/* BKDG r31116 2010-04-22  2.4.1.7 step b F3xD8[VSRampTime]
	 * If this field accepts 8 values between 10 and 500 us why
	 * does page 324 say "BIOS should set this field to 001b."
	 * (20 us) ?
	 * Shouldn't it depend on the voltage regulators, mainboard
	 * or something ?
	 */
	u32 dword;
	dword = pci_read_config32(dev, 0xd8);
	dword &= VSRAMP_MASK;
	dword |= VSRAMP_VALUE;
	pci_write_config32(dev, 0xd8, dword);
}

static void recalculateVsSlamTimeSettingOnCorePre(pci_devfn_t dev)
{
	u8 pviModeFlag;
	u8 highVoltageVid, lowVoltageVid, bValue;
	u16 minimumSlamTime;
	u16 vSlamTimes[7] = { 1000, 2000, 3000, 4000, 6000, 10000, 20000 };	/* Reg settings scaled by 100 */
	u32 dtemp;
	msr_t msr;

	/* This function calculates the VsSlamTime using the range of possible
	 * voltages instead of a hardcoded 200us.
	 * Note: his function is called only from prep_fid_change,
	 * and that from init_cpus.c finalize_node_setup()
	 * (after set AMD MSRs and init ht )
	 */

	/* BKDG r31116 2010-04-22  2.4.1.7 step b F3xD8[VSSlamTime] */
	/* Calculate Slam Time
	 * Vslam = (mobileCPU?0.2:0.4)us/mV * (Vp0 - (lowest out of Vpmin or Valt)) mV
	 * In our case, we will scale the values by 100 to avoid
	 * decimals.
	 */

	/* Determine if this is a PVI or SVI system */
	if (is_fam15h()) {
		pviModeFlag = 0;
	} else {
		dtemp = pci_read_config32(dev, 0xa0);

		if (dtemp & PVI_MODE)
			pviModeFlag = 1;
		else
			pviModeFlag = 0;
	}

	/* Get P0's voltage */
	/* MSRC001_00[68:64] are not programmed yet when called from
	   prep_fid_change, one might use F4x1[F0:E0] instead, but
	   theoretically MSRC001_00[68:64] are equal to them after
	   reset. */
	msr = rdmsr(0xC0010064);
	highVoltageVid = (u8) ((msr.lo >> PS_CPU_VID_SHFT) & 0x7F);
	if (!(msr.hi & 0x80000000)) {
  	    printk(BIOS_ERR,"P-state info in MSRC001_0064 is invalid !!!\n");
	    highVoltageVid = (u8) ((pci_read_config32(dev, 0x1E0)
				     >> PS_CPU_VID_SHFT) & 0x7F);
	}

	/* If SVI, we only care about CPU VID.
	 * If PVI, determine the higher voltage b/t NB and CPU
	 */
	if (pviModeFlag) {
		bValue = (u8) ((msr.lo >> PS_NB_VID_SHFT) & 0x7F);
		if (highVoltageVid > bValue)
			highVoltageVid = bValue;
	}

	/* Get PSmax's index */
	msr = rdmsr(0xC0010061);
	bValue = (u8) ((msr.lo >> PS_MAX_VAL_SHFT) & BIT_MASK_3);

	/* Get PSmax's VID */
	msr = rdmsr(0xC0010064 + bValue);
	lowVoltageVid = (u8) ((msr.lo >> PS_CPU_VID_SHFT) & 0x7F);
	if (!(msr.hi & 0x80000000)) {
	    printk(BIOS_ERR,"P-state info in MSR%8x is invalid !!!\n",0xC0010064 + bValue);
	    lowVoltageVid = (u8) ((pci_read_config32(dev, 0x1E0+(bValue*4))
				     >> PS_CPU_VID_SHFT) & 0x7F);
	}

	/* If SVI, we only care about CPU VID.
	 * If PVI, determine the higher voltage b/t NB and CPU
	 * BKDG 2.4.1.7 (a)
 	 */
	if (pviModeFlag) {
		bValue = (u8) ((msr.lo >> PS_NB_VID_SHFT) & 0x7F);
		if (lowVoltageVid > bValue)
			lowVoltageVid = bValue;
	}

	/* Get AltVID */
	dtemp = pci_read_config32(dev, 0xdc);
	bValue = (u8) (dtemp & BIT_MASK_7);

	/* Use the VID with the lowest voltage (higher VID) */
	if (lowVoltageVid < bValue)
		lowVoltageVid = bValue;

	u8 mobileFlag = get_platform_type() & AMD_PTYPE_MOB;
	minimumSlamTime =  (mobileFlag?2:4) * (vidTo100uV(highVoltageVid) - vidTo100uV(lowVoltageVid)); /* * 0.01 us */


	/* Now round up to nearest register setting.
	 * Note that if we don't find a value, we
	 * will fall through to a value of 7
	 */
	for (bValue = 0; bValue < 7; bValue++) {
		if (minimumSlamTime <= vSlamTimes[bValue])
			break;
	}

	/* Apply the value */
	dtemp = pci_read_config32(dev, 0xD8);
	dtemp &= VSSLAM_MASK;
	dtemp |= bValue;
	pci_write_config32(dev, 0xd8, dtemp);
}

static u32 nb_clk_did(uint8_t node, uint64_t cpuRev, uint8_t procPkg) {
	uint8_t link0isGen3 = 0;
	uint8_t offset;
	if (AMD_CpuFindCapability(node, 0, &offset)) {
	  link0isGen3 = (AMD_checkLinkType(node, offset) & HTPHY_LINKTYPE_HT3 );
	}
	/* FIXME: NB_CLKDID should be 101b for AMD_DA_C2 in package
	   S1g3 in link Gen3 mode, but I don't know how to tell
	   package S1g3 from S1g4 */
	if ((cpuRev & AMD_DA_C2) && (procPkg & AMD_PKGTYPE_S1gX)
	   && link0isGen3) {
	  return 5; /* divide clk by 128*/
	} else {
	  return 4; /* divide clk by 16 */
	}
}


static u32 power_up_down(int node, u8 procPkg) {
	uint32_t dword=0;
	/* from CPU rev guide #41322 rev 3.74 June 2010 Table 26 */
	u8 singleLinkFlag = ((procPkg == AMD_PKGTYPE_AM3_2r2)
			|| (procPkg == AMD_PKGTYPE_S1gX)
			|| (procPkg == AMD_PKGTYPE_ASB2));

	if (singleLinkFlag) {
		/*
		 * PowerStepUp=01000b - 50nS
		 * PowerStepDown=01000b - 50ns
		 */
		dword |= PW_STP_UP50 | PW_STP_DN50;
	} else {
		uint32_t dispRefModeEn = (pci_read_config32(NODE_PCI(node,0),0x68) >> 24) & 1;
		uint32_t isocEn = 0;
		int j;
		for (j=0; (j<4) && (!isocEn); j++ ) {
			u8 offset;
			if (AMD_CpuFindCapability(node, j, &offset)) {
				isocEn = (pci_read_config32(NODE_PCI(node,0),offset+4) >>12) & 1;
			}
		}

		if (is_fam15h()) {
			/* Family 15h always uses 100ns for multilink processors */
			dword |= PW_STP_UP100 | PW_STP_DN100;
		} else if (dispRefModeEn || isocEn) {
			dword |= PW_STP_UP50 | PW_STP_DN50;
		} else {
			/* get number of cores for PowerStepUp & PowerStepDown in server
			 * 1 core - 400nS  - 0000b
			 * 2 cores - 200nS - 0010b
			 * 3 cores - 133nS -> 100nS - 0011b
			 * 4 cores - 100nS - 0011b
			 */
			switch (get_core_num_in_bsp(node)) {
			case 0:
				dword |= PW_STP_UP400 | PW_STP_DN400;
				break;
			case 1:
			case 2:
				dword |= PW_STP_UP200 | PW_STP_DN200;
				break;
			case 3:
				dword |= PW_STP_UP100 | PW_STP_DN100;
				break;
			default:
				dword |= PW_STP_UP100 | PW_STP_DN100;
				break;
			}
		}
	}

	return dword;
}

static void config_clk_power_ctrl_reg0(uint8_t node, uint64_t cpuRev, uint8_t procPkg) {

	pci_devfn_t dev = NODE_PCI(node, 3);

	/* Program fields in Clock Power/Control register0 (F3xD4) */

	/* set F3xD4 Clock Power/Timing Control 0 Register
	 * NbClkDidApplyAll=1b
	 * NbClkDid=100b or 101b
	 * PowerStepUp= "platform dependent"
	 * PowerStepDown= "platform dependent"
	 * LinkPllLink=01b
	 * ClkRampHystCtl=HW default
	 * ClkRampHystSel=1111b
	 */
	uint32_t dword= pci_read_config32(dev, 0xd4);
	dword &= CPTC0_MASK;
	dword |= NB_CLKDID_ALL | LNK_PLL_LOCK | CLK_RAMP_HYST_SEL_VAL;
	dword |= (nb_clk_did(node,cpuRev,procPkg) <<  NB_CLKDID_SHIFT);

	dword |= power_up_down(node, procPkg);

	pci_write_config32(dev, 0xd4, dword);

}

static void config_power_ctrl_misc_reg(pci_devfn_t dev, uint64_t cpuRev,
		uint8_t procPkg)
{
	/* check PVI/SVI */
	uint32_t dword = pci_read_config32(dev, 0xa0);

	/* BKDG r31116 2010-04-22  2.4.1.7 step b F3xA0[VSSlamVidMod] */
	/* PllLockTime and PsiVidEn set in ruleset in defaults.h */
	if (dword & PVI_MODE) {	/* PVI */
		/* set slamVidMode to 0 for PVI */
		dword &= VID_SLAM_OFF;
	} else {	/* SVI */
		/* set slamVidMode to 1 for SVI */
		dword |= VID_SLAM_ON;
	}
	/* set the rest of A0 since we're at it... */

	if (cpuRev & (AMD_DA_Cx | AMD_RB_C3 )) {
		dword |= NB_PSTATE_FORCE_ON;
	} // else should we clear it ?


	if ((procPkg == AMD_PKGTYPE_G34) || (procPkg == AMD_PKGTYPE_C32) ) {
		dword |= BP_INS_TRI_EN_ON;
	}

	   /* TODO: look into C1E state and F3xA0[IdleExitEn]*/
	#if CONFIG_SVI_HIGH_FREQ
	if (cpuRev & AMD_FAM10_C3) {
		dword |= SVI_HIGH_FREQ_ON;
	}
	#endif
	pci_write_config32(dev, 0xa0, dword);
}

static void config_nb_syn_ptr_adj(pci_devfn_t dev, uint64_t cpuRev)
{
	/* Note the following settings are additional from the ported
	 * function setFidVidRegs()
	 */
	/* adjust FIFO between nb and core clocks to max allowed
	   values (min latency) */
	uint32_t nbPstate = pci_read_config32(dev,0x1f0) & NB_PSTATE_MASK;
	uint8_t nbSynPtrAdj;
	if ((cpuRev & (AMD_DR_Bx | AMD_DA_Cx | AMD_FAM15_ALL) )
		|| ((cpuRev & AMD_RB_C3) && (nbPstate != 0))) {
		nbSynPtrAdj = 5;
	} else {
		nbSynPtrAdj = 6;
	}

	uint32_t dword = pci_read_config32(dev, 0xdc);
	dword &= ~NB_SYN_PTR_ADJ_MASK;
	dword |= nbSynPtrAdj << NB_SYN_PTR_ADJ_POS;
	/* NbsynPtrAdj set to 5 or 6 per BKDG (needs reset) */
	pci_write_config32(dev, 0xdc, dword);
}

static void config_acpi_pwr_state_ctrl_regs(pci_devfn_t dev, uint64_t cpuRev,
		uint8_t procPkg)
{
	if (is_fam15h()) {
		/* Family 15h BKDG Rev. 3.14 D18F3x80 recommended settings */
		pci_write_config32(dev, 0x80, 0xe20be281);

		/* Family 15h BKDG Rev. 3.14 D18F3x84 recommended settings */
		pci_write_config32(dev, 0x84, 0x01e200e2);
	} else {
		/* step 1, chapter 2.4.2.6 of AMD Fam 10 BKDG #31116 Rev 3.48 22.4.2010 */
		uint32_t dword;
		uint32_t c1= 1;
		if (cpuRev & (AMD_DR_Bx)) {
			// will coreboot ever enable cache scrubbing ?
			// if it does, will it be enough to check the current state
			// or should we configure for what we'll set up later ?
			dword = pci_read_config32(dev, 0x58);
			uint32_t scrubbingCache = dword &
						( (0x1F << 16) // DCacheScrub
						| (0x1F << 8) ); // L2Scrub
			if (scrubbingCache) {
				c1 = 0x80;
			} else {
				c1 = 0xA0;
			}
		} else { // rev C or later
			// same doubt as cache scrubbing: ok to check current state ?
			dword = pci_read_config32(dev, 0xdc);
			uint32_t cacheFlushOnHalt = dword & (7 << 16);
			if (!cacheFlushOnHalt) {
				c1 = 0x80;
			}
		}
		dword = (c1 << 24) | (0xE641E6);
		pci_write_config32(dev, 0x84, dword);

		/* FIXME: BKDG Table 100 says if the link is at a Gen1
		* frequency and the chipset does not support a 10us minimum LDTSTOP
		* assertion time, then { If ASB2 && SVI then smaf001 = F6h else
		* smaf001=87h. } else ...  I hardly know what it means or how to check
		* it from here, so I bluntly assume it is false and code here the else,
		* which is easier
		*/

		uint32_t smaf001 = 0xE6;
		if (cpuRev & AMD_DR_Bx ) {
			smaf001 = 0xA6;
		} else {
		#if CONFIG_SVI_HIGH_FREQ
			if (cpuRev & (AMD_RB_C3 | AMD_DA_C3)) {
				smaf001 = 0xF6;
			}
		#endif
		}
		uint32_t fidvidChange = 0;
		if (((cpuRev & AMD_DA_Cx) && (procPkg & AMD_PKGTYPE_S1gX))
			|| (cpuRev & AMD_RB_C3) ) {
				fidvidChange=0x0B;
		}
		dword = (0xE6 << 24) | (fidvidChange << 16)
				| (smaf001 << 8) | 0x81;
		pci_write_config32(dev, 0x80, dword);
	}
}

static void prep_fid_change(void)
{
	u32 dword;
	u32 nodes;
	pci_devfn_t dev;
	int i;

	/* This needs to be run before any Pstate changes are requested */

	nodes = get_nodes();

	for (i = 0; i < nodes; i++) {
		printk(BIOS_DEBUG, "Prep FID/VID Node:%02x\n", i);
		dev = NODE_PCI(i, 3);
		uint64_t cpuRev = mctGetLogicalCPUID(0xFF);
		u8 procPkg =  mctGetProcessorPackageType();

		setVSRamp(dev);
		/* BKDG r31116 2010-04-22  2.4.1.7 step b F3xD8[VSSlamTime] */
		/* Figure out the value for VsSlamTime and program it */
		recalculateVsSlamTimeSettingOnCorePre(dev);

		config_clk_power_ctrl_reg0(i,cpuRev,procPkg);

		config_power_ctrl_misc_reg(dev,cpuRev,procPkg);
		config_nb_syn_ptr_adj(dev,cpuRev);

		config_acpi_pwr_state_ctrl_regs(dev,cpuRev,procPkg);

		dword = pci_read_config32(dev, 0x80);
		printk(BIOS_DEBUG, "  F3x80: %08x\n", dword);
		dword = pci_read_config32(dev, 0x84);
		printk(BIOS_DEBUG, "  F3x84: %08x\n", dword);
		dword = pci_read_config32(dev, 0xd4);
		printk(BIOS_DEBUG, "  F3xD4: %08x\n", dword);
		dword = pci_read_config32(dev, 0xd8);
		printk(BIOS_DEBUG, "  F3xD8: %08x\n", dword);
		dword = pci_read_config32(dev, 0xdc);
		printk(BIOS_DEBUG, "  F3xDC: %08x\n", dword);
	}
}

static void waitCurrentPstate(u32 target_pstate) {
	msr_t initial_msr = rdmsr(TSC_MSR);
	msr_t pstate_msr = rdmsr(CUR_PSTATE_MSR);
	msr_t tsc_msr;
	u8 timedout;

	/* paranoia ? I fear when we run fixPsNbVidBeforeWR we can enter a
	* P1 that is a copy of P0, therefore has the same NB DID but the
	* TSC will count twice per tick, so we have to wait for twice the
	* count to achieve the desired timeout. But I'm likely to
	* misunderstand this...
	*/
	u32 corrected_timeout = ((pstate_msr.lo==1)
				&& (!(rdmsr(0xC0010065).lo & NB_DID_M_ON)) ) ?
				WAIT_PSTATE_TIMEOUT*2 : WAIT_PSTATE_TIMEOUT;
	msr_t timeout;

	timeout.lo = initial_msr.lo + corrected_timeout;
	timeout.hi = initial_msr.hi;
	if ( (((u32)0xffffffff) - initial_msr.lo) < corrected_timeout ) {
		timeout.hi++;
	}

	// assuming TSC ticks at 1.25 ns per tick (800 MHz)
	do {
		pstate_msr = rdmsr(CUR_PSTATE_MSR);
		tsc_msr = rdmsr(TSC_MSR);
		timedout = (tsc_msr.hi > timeout.hi)
			|| ((tsc_msr.hi == timeout.hi) && (tsc_msr.lo > timeout.lo ));
	} while ( (pstate_msr.lo != target_pstate) && (! timedout) );

	if (pstate_msr.lo != target_pstate) {
		msr_t limit_msr = rdmsr(0xc0010061);
		printk(BIOS_ERR, "*** APIC ID %02x: timed out waiting for P-state %01x. Current P-state %01x P-state current limit MSRC001_0061=%08x %08x\n",
			cpuid_ebx(0x00000001) >> 24, target_pstate, pstate_msr.lo, limit_msr.hi, limit_msr.lo);

		do { // should we just go on instead ?
			pstate_msr = rdmsr(CUR_PSTATE_MSR);
		} while ( pstate_msr.lo != target_pstate  );
	}
}

static void set_pstate(u32 nonBoostedPState) {
  	msr_t msr;
  	uint8_t skip_wait;

	// Transition P0 for calling core.
	msr = rdmsr(0xC0010062);

	msr.lo = nonBoostedPState;
	wrmsr(0xC0010062, msr);

	if (is_fam15h()) {
		/* Do not wait for the first (even) set of cores to transition on Family 15h systems */
		if ((cpuid_ebx(0x00000001) & 0x01000000))
			skip_wait = 0;
		else
			skip_wait = 1;
	} else {
		skip_wait = 0;
	}

	if (!skip_wait) {
		/* Wait for core to transition to P0 */
		waitCurrentPstate(nonBoostedPState);
	}
}

static void UpdateSinglePlaneNbVid(void)
{
	u32 nbVid, cpuVid;
	u8 i;
	msr_t msr;

	/* copy higher voltage (lower VID) of NBVID & CPUVID to both */
	for (i = 0; i < 5; i++) {
		msr = rdmsr(PS_REG_BASE + i);
		nbVid = (msr.lo & PS_CPU_VID_M_ON) >> PS_CPU_VID_SHFT;
		cpuVid = (msr.lo & PS_NB_VID_M_ON) >> PS_NB_VID_SHFT;

		if (nbVid != cpuVid) {
			if (nbVid > cpuVid)
				nbVid = cpuVid;

			msr.lo = msr.lo & PS_BOTH_VID_OFF;
			msr.lo = msr.lo | (u32) ((nbVid) << PS_NB_VID_SHFT);
			msr.lo = msr.lo | (u32) ((nbVid) << PS_CPU_VID_SHFT);
			wrmsr(PS_REG_BASE + i, msr);
		}
	}
}

static void fixPsNbVidBeforeWR(u32 newNbVid, u32 coreid, u32 dev, u8 pviMode)
 {
 	msr_t msr;
 	u8 startup_pstate;

 	/* This function sets NbVid before the warm reset.
 	 *       Get StartupPstate from MSRC001_0071.
	 *       Read Pstate register pointed by [StartupPstate].
 	 *       and copy its content to P0 and P1 registers.
 	 *       Copy newNbVid to P0[NbVid].
 	 *       transition to P1 on all cores,
 	 *       then transition to P0 on core 0.
 	 *       Wait for MSRC001_0063[CurPstate] = 000b on core 0.
	 * see BKDG rev 3.48  2.4.2.9.1 BIOS NB COF and VID Configuration
	 *			      for SVI and Single-Plane PVI Systems
 	 */

 	msr = rdmsr(0xc0010071);
	startup_pstate = (msr.hi >> (32 - 32)) & 0x07;

	/* Copy startup pstate to P1 and P0 MSRs. Set the maxvid for
	 * this node in P0.  Then transition to P1 for corex and P0
	 * for core0.  These setting will be cleared by the warm reset
	 */
	msr = rdmsr(0xC0010064 + startup_pstate);
	wrmsr(0xC0010065, msr);
	wrmsr(0xC0010064, msr);

	/* missing step 2 from BDKG , F3xDC[PstateMaxVal] =
	 * max(1,F3xDC[PstateMaxVal] ) because it would take
	 * synchronization between cores and we don't think
	 * PstatMaxVal is going to be 0 on cold reset anyway ?
	 */
	if (!(pci_read_config32(dev, 0xdc) & (~PS_MAX_VAL_MASK))) {
  	   printk(BIOS_ERR,"F3xDC[PstateMaxVal] is zero. Northbridge voltage setting will fail. fixPsNbVidBeforeWR in fidvid.c needs fixing. See AMD # 31116 rev 3.48 BKDG 2.4.2.9.1\n");
	};

	msr.lo &= ~0xFE000000;	// clear nbvid
	msr.lo |= (newNbVid << 25);
	wrmsr(0xC0010064, msr);

	if (pviMode) { /* single plane*/
	  UpdateSinglePlaneNbVid();
	}

	// Transition to P1 for all APs and P0 for core0.
	set_pstate(1);

	if (coreid == 0) {
	     set_pstate(0);
 	}

	/* missing step 7 (restore PstateMax to 0 if needed) because
	 * we skipped step 2
	 */

}

static u32 needs_NB_COF_VID_update(void)
{
	u8 nb_cof_vid_update;
	u8 nodes;
	u8 i;

	if (is_fam15h())
		return 0;

	/* If any node has nb_cof_vid_update set all nodes need an update. */
	nodes = get_nodes();
	nb_cof_vid_update = 0;
	for (i = 0; i < nodes; i++) {
		uint64_t cpuRev = mctGetLogicalCPUID(i);
		u32 nbCofVidUpdateDefined = (cpuRev & (AMD_FAM10_LT_D));
		if (nbCofVidUpdateDefined
		    && (pci_read_config32(NODE_PCI(i, 3), 0x1FC)
			& NB_COF_VID_UPDATE_MASK)) {
			nb_cof_vid_update = 1;
			break;
		}
	}
	return nb_cof_vid_update;
}

static u32 init_fidvid_core(u32 nodeid, u32 coreid)
{
	pci_devfn_t dev;
	u32 vid_max;
	u32 fid_max = 0;
	u8 nb_cof_vid_update = needs_NB_COF_VID_update();
	u8 pvimode;
	u32 reg1fc;

	/* Steps 1-6 of BIOS NB COF and VID Configuration
	 * for SVI and Single-Plane PVI Systems. BKDG 2.4.2.9 #31116 rev 3.48
	 */
	dev = NODE_PCI(nodeid, 3);
	if (is_fam15h())
		pvimode = 0;
	else
		pvimode = pci_read_config32(dev, PW_CTL_MISC) & PVI_MODE;
	reg1fc = pci_read_config32(dev, 0x1FC);

	if (nb_cof_vid_update) {
		vid_max = (reg1fc &  SINGLE_PLANE_NB_VID_MASK ) >>  SINGLE_PLANE_NB_VID_SHIFT;
		fid_max = (reg1fc &  SINGLE_PLANE_NB_FID_MASK ) >>  SINGLE_PLANE_NB_FID_SHIFT;

		if (!pvimode) { /* SVI, dual power plane */
			vid_max = vid_max - ((reg1fc &  DUAL_PLANE_NB_VID_OFF_MASK ) >>  DUAL_PLANE_NB_VID_SHIFT );
			fid_max = fid_max +  ((reg1fc &  DUAL_PLANE_NB_FID_OFF_MASK ) >>  DUAL_PLANE_NB_FID_SHIFT );
		}
		/* write newNbVid to P-state Reg's NbVid always if NbVidUpdatedAll=1 */
		fixPsNbVidBeforeWR(vid_max, coreid, dev, pvimode);

		/* fid setup is handled by the BSP at the end. */

	} else {	/* ! nb_cof_vid_update */
		/* Use max values */
		if (pvimode)
			UpdateSinglePlaneNbVid();
	}

	return ((nb_cof_vid_update << 16) | (fid_max << 8));

}

static void init_fidvid_ap(u32 apicid, u32 nodeid, u32 coreid)
{
	u32 send;

	printk(BIOS_DEBUG, "FIDVID on AP: %02x\n", apicid);

	send = init_fidvid_core(nodeid, coreid);
	send |= (apicid << 24);	// ap apicid

	// Send signal to BSP about this AP max fid
	// This also indicates this AP is ready for warm reset (if required).
	lapic_write(LAPIC_MSG_REG, send | F10_APSTATE_RESET);
}

static u32 calc_common_fid(u32 fid_packed, u32 fid_packed_new)
{
	u32 fidmax;
	u32 fidmax_new;

	fidmax = (fid_packed >> 8) & 0xFF;

	fidmax_new = (fid_packed_new >> 8) & 0xFF;

	if (fidmax > fidmax_new) {
		fidmax = fidmax_new;
	}

	fid_packed &= 0xFF << 16;
	fid_packed |= (fidmax << 8);
	fid_packed |= fid_packed_new & (0xFF << 16);	// set nb_cof_vid_update

	return fid_packed;
}

static void init_fidvid_bsp_stage1(u32 ap_apicid, void *gp)
{
	u32 readback = 0;
	u32 timeout = 1;

	struct fidvid_st *fvp = gp;
	int loop;

	print_debug_fv("Wait for AP stage 1: ap_apicid = ", ap_apicid);

	loop = 100000;
	while (--loop > 0) {
		if (lapic_remote_read(ap_apicid, LAPIC_MSG_REG, &readback) != 0)
			continue;
		if (((readback & 0x3f) == F10_APSTATE_RESET)
			|| (is_fam15h() && ((readback & 0x3f) == F10_APSTATE_ASLEEP))) {
			timeout = 0;
			break;	/* target ap is in stage 1 */
		}
	}

	if (timeout) {
		printk(BIOS_DEBUG, "%s: timed out reading from ap %02x\n",
		       __func__, ap_apicid);
		return;
	}

	print_debug_fv("\treadback = ", readback);

	fvp->common_fid = calc_common_fid(fvp->common_fid, readback);

	print_debug_fv("\tcommon_fid(packed) = ", fvp->common_fid);

}

static void fixPsNbVidAfterWR(u32 newNbVid, u8 NbVidUpdatedAll,u8 pviMode)
{
	msr_t msr;
	u8 i;
	u8 StartupPstate;

	/* BKDG 2.4.2.9.1 11-12
	 * This function copies newNbVid to NbVid bits in P-state
	 * Registers[4:0] if its NbDid bit=0, and IddValue!=0 in case of
	 * NbVidUpdatedAll =0 or copies newNbVid to NbVid bits in
	 * P-state Registers[4:0] if its IddValue!=0 in case of
	 * NbVidUpdatedAll=1. Then transition to StartPstate.
	 */

	/* write newNbVid to P-state Reg's NbVid if its NbDid=0 */
	for (i = 0; i < 5; i++) {
		msr = rdmsr(0xC0010064 + i);
		/*  NbDid (bit 22 of P-state Reg) == 0  or NbVidUpdatedAll = 1 */
		if (   (msr.hi & PS_IDD_VALUE_MASK)
		    && (msr.hi & PS_EN_MASK)
		    &&(((msr.lo & PS_NB_DID_MASK) == 0) || NbVidUpdatedAll)) {
			msr.lo &= PS_NB_VID_M_OFF;
			msr.lo |= (newNbVid & 0x7F) << PS_NB_VID_SHFT;
			wrmsr(0xC0010064 + i, msr);
		}
	}

	/* Not documented. Would overwrite Nb_Vids just copied
	 * should we just update cpu_vid or nothing at all ?
	 */
	if (pviMode) { //single plane
	    UpdateSinglePlaneNbVid();
	}
	/* For each core in the system, transition all cores to StartupPstate */
	msr = rdmsr(0xC0010071);
	StartupPstate = msr.hi & 0x07;

	/* Set and wait for StartupPstate to set. */
	set_pstate(StartupPstate);

}

static void finalPstateChange(void)
{
	/* Enable P0 on all cores for best performance.
	 * Linux can slow them down later if need be.
	 * It is safe since they will be in C1 halt
	 * most of the time anyway.
	 */
	set_pstate(0);
}

static void init_fidvid_stage2(u32 apicid, u32 nodeid)
{
	msr_t msr;
	pci_devfn_t dev;
	u32 reg1fc;
	u32 dtemp;
	u32 nbvid;
	u8 nb_cof_vid_update = needs_NB_COF_VID_update();
	u8 NbVidUpdateAll;
	u8 pvimode;

	/* After warm reset finish the fid/vid setup for all cores. */

	/* If any node has nb_cof_vid_update set all nodes need an update. */

	dev = NODE_PCI(nodeid, 3);
	if (is_fam15h())
		pvimode = 0;
	else
		pvimode = (pci_read_config32(dev, 0xA0) >> 8) & 1;
	reg1fc = pci_read_config32(dev, 0x1FC);
	nbvid = (reg1fc >> 7) & 0x7F;
	NbVidUpdateAll = (reg1fc >> 1) & 1;

	if (nb_cof_vid_update) {
		if (!pvimode) {	/* SVI */
			nbvid = nbvid - ((reg1fc >> 17) & 0x1F);
		}
		/* write newNbVid to P-state Reg's NbVid if its NbDid=0 */
		fixPsNbVidAfterWR(nbvid, NbVidUpdateAll,pvimode);
 	} else {		/* !nb_cof_vid_update */
		if (pvimode)
			UpdateSinglePlaneNbVid();
	}
	dtemp = pci_read_config32(dev, 0xA0);
	dtemp &= PLLLOCK_OFF;
	dtemp |= PLLLOCK_DFT_L;
	pci_write_config32(dev, 0xA0, dtemp);

	dualPlaneOnly(dev);
	applyBoostFIDOffset(dev, nodeid);
	enableNbPState1(dev);

	finalPstateChange();

	if (!is_fam15h()) {
		/* Set TSC to tick at the P0 ndfid rate */
		msr = rdmsr(HWCR);
		msr.lo |= 1 << 24;
		wrmsr(HWCR, msr);
	}
}


#if CONFIG_SET_FIDVID_STORE_AP_APICID_AT_FIRST
struct ap_apicid_st {
	u32 num;
	// it could use 256 bytes for 64 node quad core system
	u8 apicid[NODE_NUMS * 4];
};

static void store_ap_apicid(unsigned ap_apicid, void *gp)
{
	struct ap_apicid_st *p = gp;

	p->apicid[p->num++] = ap_apicid;

}
#endif


static int init_fidvid_bsp(u32 bsp_apicid, u32 nodes)
{
#if CONFIG_SET_FIDVID_STORE_AP_APICID_AT_FIRST
	struct ap_apicid_st ap_apicidx;
	u32 i;
#endif
	struct fidvid_st fv;

	printk(BIOS_DEBUG, "FIDVID on BSP, APIC_id: %02x\n", bsp_apicid);

	/* Steps 1-6 of BIOS NB COF and VID Configuration
	 * for SVI and Single-Plane PVI Systems.
	 */
	fv.common_fid = init_fidvid_core(0, 0);

	print_debug_fv("BSP fid = ", fv.common_fid);

#if CONFIG_SET_FIDVID_STORE_AP_APICID_AT_FIRST && !CONFIG_SET_FIDVID_CORE0_ONLY
	/* For all APs (We know the APIC ID of all APs even when the APIC ID
	   is lifted) remote read from AP LAPIC_MSG_REG about max fid.
	   Then calculate the common max fid that can be used for all
	   APs and BSP */
	ap_apicidx.num = 0;

	for_each_ap(bsp_apicid, CONFIG_SET_FIDVID_CORE_RANGE, -1, store_ap_apicid, &ap_apicidx);

	for (i = 0; i < ap_apicidx.num; i++) {
		init_fidvid_bsp_stage1(ap_apicidx.apicid[i], &fv);
	}
#else
	for_each_ap(bsp_apicid, CONFIG_SET_FIDVID_CORE0_ONLY, -1, init_fidvid_bsp_stage1, &fv);
#endif

	print_debug_fv("common_fid = ", fv.common_fid);

	if (fv.common_fid & (1 << 16)) {	/* check nb_cof_vid_update */

		// Enable the common fid and other settings.
		enable_fid_change((fv.common_fid >> 8) & 0x1F);

		// nbfid change need warm reset, so reset at first
		return 1;
	}

	return 0;		// No FID/VID changes. Don't reset
}
#endif