path: root/src/cpu/amd/model_fxx/fidvid.c

#if K8_SET_FIDVID == 1

#define K8_SET_FIDVID_DEBUG 0 

#define K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST 1

static inline void print_debug_fv(const char *str, unsigned val)
{
#if K8_SET_FIDVID_DEBUG == 1
        #if CONFIG_USE_INIT==1
        	printk_debug("%s%x\r\n", str, val);
        #else
                print_debug(str); print_debug_hex32(val); print_debug("\r\n");
        #endif
#endif
}

static inline void print_debug_fv_8(const char *str, unsigned val)
{
#if K8_SET_FIDVID_DEBUG == 1
        #if CONFIG_USE_INIT==1
                printk_debug("%s%02x\r\n", str, val);
        #else
                print_debug(str); print_debug_hex8(val); print_debug("\r\n");
        #endif
#endif
}

static inline void print_debug_fv_64(const char *str, unsigned val, unsigned val2)
{
#if K8_SET_FIDVID_DEBUG == 1
        #if CONFIG_USE_INIT==1
                printk_debug("%s%x%x\r\n", str, val, val2);
        #else
                print_debug(str); print_debug_hex32(val); print_debug_hex32(val2); print_debug("\r\n");
        #endif
#endif
}


static void enable_fid_change(void)
{
	uint32_t dword;
	unsigned nodes;
	int i;

	nodes = ((pci_read_config32(PCI_DEV(0, 0x18, 0), 0x60)>>4) & 7) + 1;

	for(i=0; i<nodes; i++) {
		dword = pci_read_config32(PCI_DEV(0, 0x18+i, 3), 0xd8);
		dword &= 0x8ff00000;
		dword |= (2<<28) | (0x02710);
	        pci_write_config32(PCI_DEV(0, 0x18+i, 3), 0xd8, dword);

		dword = 0x04e2a707;
		pci_write_config32(PCI_DEV(0, 0x18+i, 3), 0xd4, dword);

		dword = pci_read_config32(PCI_DEV(0, 0x18+i, 2), 0x94);
		dword |= (1<<14);// disable the DRAM interface at first, it will be enabled by raminit again
		pci_write_config32(PCI_DEV(0, 0x18+i, 2), 0x94, dword);

                dword = 0x23070000; //enable FID/VID change
//		dword = 0x00070000; //enable FID/VID change
                pci_write_config32(PCI_DEV(0, 0x18+i, 3), 0x80, dword);

                dword = 0x00132113;
                pci_write_config32(PCI_DEV(0, 0x18+i, 3), 0x84, dword);

	}
}

static unsigned set_fidvid(unsigned apicid, unsigned fidvid, int showmessage)
{
	//for (cur, new) there is one <1600MHz x8 to find out next_fid 
	const static uint8_t next_fid_a[] = {
	/* x4  x5  x6  x7  x8  x9 x10 x11 x12 x13 x14 x15 */ // 0:x4, 2:x5....BASE=4, MIN=4, MAX=25, INC=2 result = (xX-BASE)*INC
/* x4 */    0,  9,  9,  8,  9,  9,  9,  9,  9,  9,  9,  9,
/* x5 */    9,  0, 11, 11,  9,  9, 10, 11, 11, 11, 11, 11, 
/* x6 */   11, 11,  0, 13, 11, 11, 11, 11, 12, 13, 13, 13,
/* x7 */   13, 13, 13,  0, 13, 13, 13, 13, 13, 13, 14, 15,
/* x8 */    4,  9,  9,  9,  0,  9,  9,  9,  9,  9,  9,  9,
/* x9 */    4,  5, 10, 10,  8,  0,  0,  0,  0,  0,  0,  0, 
/*x10 */    9,  5, 11, 11,  9,  0,  0,  0,  0,  0,  0,  0, 
/*x11 */   10,  5,  6, 12, 10,  0,  0,  0,  0,  0,  0,  0,
/*x12 */   11, 11,  6, 13, 11,  0,  0,  0,  0,  0,  0,  0,
/*x13 */   12, 12,  6,  7, 12,  0,  0,  0,  0,  0,  0,  0,
/*x14 */   13, 13, 13,  7, 13,  0,  0,  0,  0,  0,  0,  0,
/*x15 */   14, 14, 14,  7, 14,  0,  0,  0,  0,  0,  0,  0, 
	};

        msr_t msr;
        uint32_t vid;
        uint32_t fid;
	uint32_t vid_max;
	uint32_t fid_max;
        uint32_t vid_cur;
        uint32_t fid_cur;
	unsigned apicidx;

	int steps;
	int loop;

	apicidx = lapicid();

	if(apicid!=apicidx) {
#if CONFIG_USE_INIT == 1
		printk_err("wrong apicid, we want change %x, but it is %x\r\n", apicid, apicidx);
#else
		print_err("wrong apicid, we want change "); print_err_hex8(apicid); print_err(" but it is "); print_err_hex8(apicidx); print_err("\r\n");
#endif
		return fidvid;	
	}

	fid = (fidvid >> 8) & 0x3f;
	vid = (fidvid >> 16) & 0x3f;

	msr = rdmsr(0xc0010042);

        vid_cur = msr.hi & 0x3f;
        fid_cur = msr.lo & 0x3f;

	if((vid_cur==vid) && (fid_cur==fid)) return fidvid; 

        vid_max = (msr.hi>>(48-32)) & 0x3f;
        fid_max = (msr.lo>>16) & 0x3f;

        //set vid to max
        msr.hi = 1;
        msr.lo = (vid_max<<8) | (fid_cur);
        msr.lo |= (1<<16); // init changes
        wrmsr(0xc0010041, msr);

        for(loop=0;loop<100000;loop++){
		msr = rdmsr(0xc0010042);
                if(!(msr.lo & (1<<31))) break;
        }
	vid_cur = msr.hi & 0x3f;

	steps = 8; //??
        while((fid_cur!=fid) && (steps-->0)) {
		uint32_t fid_temp;	
		if((fid_cur > (8-4)*2) && (fid> (8-4)*2)) {
	        	if(fid_cur<fid) {
        	        	fid_temp = fid_cur + 2;
       	                } else {
               	                fid_temp = fid_cur - 2;
                       	}
		}
		else { //there is one < 8, So we need to lookup the table to find the fid_cur
			int temp;
			temp = next_fid_a[(fid_cur/2)*12+(fid/2)];
			if(temp <= 0) break;
			fid_temp = (temp-4) * 2;
		}
		if(fid_temp>fid_max) break;

		fid_cur = fid_temp;

	        //set target fid
        	msr.hi = (100000/5);
	        msr.lo = (vid_cur<<8) | fid_cur;
	        msr.lo |= (1<<16); // init changes
	        wrmsr(0xc0010041, msr);


#if K8_SET_FIDVID_DEBUG == 1
		if(showmessage) {
			print_debug_fv_8("\tapicid in set_fidvid = ", apicid);
			print_debug_fv_64("ctrl msr fid, vid ", msr.hi, msr.lo); 
		}
#endif

	        for(loop=0;loop<100000;loop++){
        		msr = rdmsr(0xc0010042);
	                if(!(msr.lo & (1<<31))) break;
        	}
	        fid_cur = msr.lo & 0x3f;

#if K8_SET_FIDVID_DEBUG == 1
		if(showmessage)	{	
                        print_debug_fv_64("status msr fid, vid ", msr.hi, msr.lo);
		}
#endif
	}

        //set vid to final 
        msr.hi = 1;
        msr.lo = (vid<<8) | (fid_cur);
        msr.lo |= (1<<16); // init changes
        wrmsr(0xc0010041, msr);

        for(loop=0;loop<100000;loop++){
                msr = rdmsr(0xc0010042);
                if(!(msr.lo & (1<<31))) break;
        }
        vid_cur = msr.hi & 0x3f;

	fidvid = (vid_cur<< 16) | (fid_cur<<8);

	if(showmessage) {
		if((fid!=fid_cur) || (vid!=vid_cur)) {
			print_err("set fidvid failed\r\n");
		}
	}

	return fidvid;

}

static void init_fidvid_ap(unsigned bsp_apicid, unsigned apicid)
{

	uint32_t send;
        uint32_t readback;
	msr_t msr;
        uint32_t vid_cur;
        uint32_t fid_cur;
	int loop;

        msr =  rdmsr(0xc0010042);
        send = ((msr.lo>>16) & 0x3f) << 8; //max fid
        send |= ((msr.hi>>(48-32)) & 0x3f) << 16; //max vid
	send |= (apicid<<24); // ap apicid

        vid_cur = msr.hi & 0x3f;
        fid_cur = msr.lo & 0x3f;

	// set to current
        msr.hi = 1;
        msr.lo = (vid_cur<<8) | (fid_cur);
        wrmsr(0xc0010041, msr);

	wait_cpu_state(bsp_apicid, 1);
        //send signal to BSP about this AP max fid and vid
        lapic_write(LAPIC_MSG_REG, send | 1); //AP at state 1 that sent our fid and vid

//	wait_cpu_state(bsp_apicid, 2);// don't need we can use apicid directly	
	loop = 100000;
        while(--loop>0) {
		//remote read BSP signal that include vid and fid that need to set
                if(lapic_remote_read(bsp_apicid, LAPIC_MSG_REG, &readback)!=0) continue;
                if(((readback>>24) & 0xff) == apicid) break; // it is this cpu turn
        }

	if(loop>0) {
       		readback = set_fidvid(apicid, readback & 0xffff00, 1); // this AP
       		//send signal to BSP that this AP fid/vid is set // allow to change state2 is together with apicid
	        send = (apicid<<24) | (readback & 0x00ffff00); // AP at state that We set the requested fid/vid
	}

       	lapic_write(LAPIC_MSG_REG, send | 2);

	wait_cpu_state(bsp_apicid, 3);
}

static unsigned calc_common_fidvid(unsigned fidvid, unsigned fidvidx)
{
	/* FIXME: need to check the change path to verify if it is reachable when common fid is small than 1.6G */	
	if((fidvid & 0xff00)<=(fidvidx & 0xff00)) {
		return fidvid;
	}
	else {
		return fidvidx;
	}
} 

struct fidvid_st {
	unsigned common_fidvid;
};

static void init_fidvid_bsp_stage1(unsigned ap_apicid, void *gp ) 
{		
		unsigned readback;

		struct fidvid_st *fvp = gp;
		int loop;
		
                print_debug_fv("state 1: ap_apicid=", ap_apicid);

		loop = 100000;
                while(--loop > 0) {
  	              if(lapic_remote_read(ap_apicid, LAPIC_MSG_REG, &readback)!=0) continue;
                      if((readback & 0xff) == 1) break; //target ap is in stage 1 
                }

                print_debug_fv("\treadback=", readback);

                fvp->common_fidvid = calc_common_fidvid(fvp->common_fidvid, readback & 0xffff00);

                print_debug_fv("\tcommon_fidvid=", fvp->common_fidvid);

}
static void init_fidvid_bsp_stage2(unsigned ap_apicid, void *gp)
{
		unsigned readback;

		struct fidvid_st *fvp = gp;
		int loop;

                print_debug_fv("state 2: ap_apicid=", ap_apicid);

                lapic_write(LAPIC_MSG_REG, fvp->common_fidvid | (ap_apicid<<24) | 2); // all set to state2
		
		loop = 100000;	
                while(--loop > 0) {
                	if(lapic_remote_read(ap_apicid, LAPIC_MSG_REG, &readback)!=0) continue;
                        if((readback & 0xff) == 2) break; // target ap is stage 2, and it'd FID has beed set
                }

                print_debug_fv("\treadback=", readback);
}

#if K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1
struct ap_apicid_st {
	unsigned num;
	unsigned apicid[16]; // 8 way dual core need 16
	/* FIXME: 32 node quad core, may need 128 */
};

static void store_ap_apicid(unsigned ap_apicid, void *gp)
{
	struct ap_apicid_st *p = gp;
	
	p->apicid[p->num++] = ap_apicid;

}
#endif

static void init_fidvid_bsp(unsigned bsp_apicid) 
{
        uint32_t vid_max;
        uint32_t fid_max;

	struct fidvid_st fv;

#if K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1
	struct ap_apicid_st ap_apicidx;
	unsigned i;
#endif

	
        msr_t msr;
        msr =  rdmsr(0xc0010042);
        fid_max = ((msr.lo>>16) & 0x3f); //max fid
        vid_max = ((msr.hi>>(48-32)) & 0x3f); //max vid
	fv.common_fidvid = (fid_max<<8)|(vid_max<<16);


        // for all APs (We know the APIC ID of all APs even the APIC ID is lifted)
        // remote read from AP about max fid/vid

	//let all ap trains to state 1
	lapic_write(LAPIC_MSG_REG,  (bsp_apicid<<24) | 1);  

        // calculate the common max fid/vid that could be used for all APs and BSP
#if K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1
	ap_apicidx.num = 0;
	
	for_each_ap(bsp_apicid, K8_SET_FIDVID_CORE0_ONLY, store_ap_apicid, &ap_apicidx);

	for(i=0;i<ap_apicidx.num;i++) {
		init_fidvid_bsp_stage1(ap_apicidx.apicid[i], &fv);
	}
#else
	for_each_ap(bsp_apicid, K8_SET_FIDVID_CORE0_ONLY, init_fidvid_bsp_stage1, &fv);
#endif


        // set BSP fid and vid
	print_debug_fv("bsp apicid=", bsp_apicid);
	fv.common_fidvid = set_fidvid(bsp_apicid, fv.common_fidvid, 1);
        print_debug_fv("common_fidvid=", fv.common_fidvid);


        //for all APs ( We know the APIC ID of all AP even the APIC ID is lifted)
        // send signal to the AP it could change it's fid/vid
        // remote read singnal from AP that AP is done

        fv.common_fidvid &= 0xffff00;

	//set state 2 allow is in init_fidvid_bsp_stage2
#if K8_SET_FIDVID_STORE_AP_APICID_AT_FIRST == 1
        for(i=0;i<ap_apicidx.num;i++) {
                init_fidvid_bsp_stage2(ap_apicidx.apicid[i], &fv);
        }
#else
	for_each_ap(bsp_apicid, K8_SET_FIDVID_CORE0_ONLY, init_fidvid_bsp_stage2, &fv);
#endif

	lapic_write(LAPIC_MSG_REG, fv.common_fidvid | (bsp_apicid<<24) | 3); // clear the state

	//here  wait a while, so last ap could read pack, and stop it, don't call init_timer too early or just don't use init_timer

}

#endif