1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2009 Samsung Electronics
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h> /* for __console definition */
#include <uart.h>
#include <arch/io.h>
#include "uart.h"
#include "clk.h"
#include "cpu.h"
#include "periph.h"
#define RX_FIFO_COUNT_MASK 0xff
#define RX_FIFO_FULL_MASK (1 << 8)
#define TX_FIFO_FULL_MASK (1 << 24)
/* FIXME(dhendrix): exynos5 has 4 UARTs and its functions in u-boot take a
base_port argument. However console_driver functions do not. */
static uint32_t base_port = CONFIG_CONSOLE_SERIAL_UART_ADDRESS;
/*
* The coefficient, used to calculate the baudrate on S5P UARTs is
* calculated as
* C = UBRDIV * 16 + number_of_set_bits_in_UDIVSLOT
* however, section 31.6.11 of the datasheet doesn't recomment using 1 for 1,
* 3 for 2, ... (2^n - 1) for n, instead, they suggest using these constants:
*/
static const int udivslot[] = {
0,
0x0080,
0x0808,
0x0888,
0x2222,
0x4924,
0x4a52,
0x54aa,
0x5555,
0xd555,
0xd5d5,
0xddd5,
0xdddd,
0xdfdd,
0xdfdf,
0xffdf,
};
static void serial_setbrg_dev(void)
{
struct s5p_uart *uart = (struct s5p_uart *)base_port;
u32 uclk;
u32 baudrate = CONFIG_TTYS0_BAUD;
u32 val;
// All UARTs share the same clock.
uclk = clock_get_periph_rate(PERIPH_ID_UART3);
val = uclk / baudrate;
writel(val / 16 - 1, &uart->ubrdiv);
/*
* FIXME(dhendrix): the original uart.h had a "br_rest" value which
* does not seem relevant to the exynos5420... not entirely sure
* where/if we need to worry about it here
*/
#if 0
if (s5p_uart_divslot())
writel(udivslot[val % 16], &uart->rest.slot);
else
writeb(val % 16, &uart->rest.value);
#endif
}
/*
* Initialise the serial port with the given baudrate. The settings
* are always 8 data bits, no parity, 1 stop bit, no start bits.
*/
static void exynos5_init_dev(void)
{
struct s5p_uart *uart = (struct s5p_uart *)base_port;
// TODO initialize with correct peripheral id by base_port.
exynos_pinmux_uart3();
/* enable FIFOs */
writel(0x1, &uart->ufcon);
writel(0, &uart->umcon);
/* 8N1 */
writel(0x3, &uart->ulcon);
/* No interrupts, no DMA, pure polling */
writel(0x245, &uart->ucon);
serial_setbrg_dev();
}
static int exynos5_uart_err_check(int op)
{
struct s5p_uart *uart = (struct s5p_uart *)base_port;
unsigned int mask;
/*
* UERSTAT
* Break Detect [3]
* Frame Err [2] : receive operation
* Parity Err [1] : receive operation
* Overrun Err [0] : receive operation
*/
if (op)
mask = 0x8;
else
mask = 0xf;
return readl(&uart->uerstat) & mask;
}
/*
* Read a single byte from the serial port. Returns 1 on success, 0
* otherwise. When the function is succesfull, the character read is
* written into its argument c.
*/
static unsigned char exynos5_uart_rx_byte(void)
{
struct s5p_uart *uart = (struct s5p_uart *)base_port;
/* wait for character to arrive */
while (!(readl(&uart->ufstat) & (RX_FIFO_COUNT_MASK |
RX_FIFO_FULL_MASK))) {
if (exynos5_uart_err_check(0))
return 0;
}
return readb(&uart->urxh) & 0xff;
}
/*
* Output a single byte to the serial port.
*/
static void exynos5_uart_tx_byte(unsigned char data)
{
struct s5p_uart *uart = (struct s5p_uart *)base_port;
/* wait for room in the tx FIFO */
while ((readl(&uart->ufstat) & TX_FIFO_FULL_MASK)) {
if (exynos5_uart_err_check(1))
return;
}
writeb(data, &uart->utxh);
}
#if !defined(__PRE_RAM__)
static const struct console_driver exynos5_uart_console __console = {
.init = exynos5_init_dev,
.tx_byte = exynos5_uart_tx_byte,
// .tx_flush = exynos5_uart_tx_flush,
.rx_byte = exynos5_uart_rx_byte,
// .tst_byte = exynos5_uart_tst_byte,
};
uint32_t uartmem_getbaseaddr(void)
{
return base_port;
}
#else
void uart_init(void)
{
exynos5_init_dev();
}
unsigned char uart_rx_byte(void)
{
return exynos5_uart_rx_byte();
}
void uart_tx_byte(unsigned char data)
{
exynos5_uart_tx_byte(data);
}
void uart_tx_flush(void)
{
}
#endif
|
