summaryrefslogtreecommitdiff
path: root/src/drivers/parade/ps8640/ps8640.c
blob: 95965601ec1d7f5d28c90d537bbab9d28247c055 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
/*
 * This file is part of the coreboot project.
 *
 * Copyright 2015 MediaTek Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <delay.h>
#include <device/i2c.h>
#include <edid.h>
#include <console/console.h>
#include <timer.h>

#include "ps8640.h"

int ps8640_get_edid(uint8_t bus, uint8_t chip, struct edid *out)
{
	int ret;
	u8 edid[EDID_LENGTH * 2];
	int edid_size = EDID_LENGTH;

	i2c_writeb(bus, chip + 2, PAGE2_I2C_BYPASS,
		   EDID_I2C_ADDR | I2C_BYPASS_EN);
	ret = i2c_read_bytes(bus, EDID_I2C_ADDR, 0, edid, EDID_LENGTH);

	if (ret != 0) {
		printk(BIOS_INFO, "Failed to read EDID.\n");
		return -1;
	}

	/* check if edid have extension flag, and read additional EDID data */
	if (edid[EDID_EXTENSION_FLAG]) {
		edid_size += EDID_LENGTH;
		ret = i2c_read_bytes(bus, EDID_I2C_ADDR, EDID_LENGTH,
				     &edid[EDID_LENGTH], EDID_LENGTH);
		if (ret != 0) {
			printk(BIOS_INFO, "Failed to read EDID ext block.\n");
			return -1;
		}
	}

	if (decode_edid(edid, edid_size, out)) {
		printk(BIOS_INFO, "Failed to decode EDID.\n");
		return -1;
	}

	return 0;
}

int ps8640_init(uint8_t bus, uint8_t chip)
{
	u8 set_vdo_done;
	struct stopwatch sw;

	mdelay(200);
	stopwatch_init_msecs_expire(&sw, 200);

	while (true) {
		i2c_readb(bus, chip + 2, PAGE2_GPIO_H, &set_vdo_done);
		if ((set_vdo_done & PS_GPIO9) == PS_GPIO9)
			break;
		if (stopwatch_expired(&sw)) {
			printk(BIOS_INFO, "Failed to init ps8640.\n");
			return -1;
		}

		mdelay(20);
	}

	mdelay(50);

	/*
	 * The Manufacturer Command Set (MCS) is a device dependent interface
	 * intended for factory programming of the display module default
	 * parameters. Once the display module is configured, the MCS shall be
	 * disabled by the manufacturer. Once disabled, all MCS commands are
	 * ignored by the display interface.
	 */
	i2c_write_field(bus, chip + 2, PAGE2_MCS_EN, 0x0, MCS_EN_MASK,
			MCS_EN_SHIFT);
	i2c_writeb(bus, chip + 3, PAGE3_SET_ADD, VDO_CTL_ADD);
	i2c_writeb(bus, chip + 3, PAGE3_SET_VAL, VDO_DIS);
	i2c_writeb(bus, chip + 3, PAGE3_SET_ADD, VDO_CTL_ADD);
	i2c_writeb(bus, chip + 3, PAGE3_SET_VAL, VDO_EN);

	return 0;
}