1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2003 Eric Biederman
* Copyright (C) 2006-2010 coresystems GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <arch/io.h>
#include <console/uart.h>
#include <device/device.h>
#include <delay.h>
#include "uart8250reg.h"
/* Should support 8250, 16450, 16550, 16550A type UARTs */
/* Expected character delay at 1200bps is 9ms for a working UART
* and no flow-control. Assume UART as stuck if shift register
* or FIFO takes more than 50ms per character to appear empty.
*/
#define SINGLE_CHAR_TIMEOUT (50 * 1000)
#define FIFO_TIMEOUT (16 * SINGLE_CHAR_TIMEOUT)
static int uart8250_mem_can_tx_byte(unsigned base_port)
{
return read8(base_port + UART_LSR) & UART_LSR_THRE;
}
static void uart8250_mem_tx_byte(unsigned base_port, unsigned char data)
{
unsigned long int i = SINGLE_CHAR_TIMEOUT;
while(i-- && !uart8250_mem_can_tx_byte(base_port))
udelay(1);
write8(base_port + UART_TBR, data);
}
static void uart8250_mem_tx_flush(unsigned base_port)
{
unsigned long int i = FIFO_TIMEOUT;
while(i-- && !(read8(base_port + UART_LSR) & UART_LSR_TEMT))
udelay(1);
}
static int uart8250_mem_can_rx_byte(unsigned base_port)
{
return read8(base_port + UART_LSR) & UART_LSR_DR;
}
static unsigned char uart8250_mem_rx_byte(unsigned base_port)
{
unsigned long int i = SINGLE_CHAR_TIMEOUT;
while(i-- && !uart8250_mem_can_rx_byte(base_port))
udelay(1);
if (i)
return read8(base_port + UART_RBR);
else
return 0x0;
}
static void uart8250_mem_init(unsigned base_port, unsigned divisor)
{
/* Disable interrupts */
write8(base_port + UART_IER, 0x0);
/* Enable FIFOs */
write8(base_port + UART_FCR, UART_FCR_FIFO_EN);
/* Assert DTR and RTS so the other end is happy */
write8(base_port + UART_MCR, UART_MCR_DTR | UART_MCR_RTS);
/* DLAB on */
write8(base_port + UART_LCR, UART_LCR_DLAB | CONFIG_TTYS0_LCS);
write8(base_port + UART_DLL, divisor & 0xFF);
write8(base_port + UART_DLM, (divisor >> 8) & 0xFF);
/* Set to 3 for 8N1 */
write8(base_port + UART_LCR, CONFIG_TTYS0_LCS);
}
void uart_init(int idx)
{
u32 base = uart_platform_base(idx);
if (!base)
return;
unsigned int div;
div = uart_baudrate_divisor(default_baudrate(), uart_platform_refclk(), 16);
uart8250_mem_init(base, div);
}
void uart_tx_byte(int idx, unsigned char data)
{
u32 base = uart_platform_base(idx);
if (!base)
return;
uart8250_mem_tx_byte(base, data);
}
unsigned char uart_rx_byte(int idx)
{
u32 base = uart_platform_base(idx);
if (!base)
return 0xff;
return uart8250_mem_rx_byte(base);
}
void uart_tx_flush(int idx)
{
u32 base = uart_platform_base(idx);
if (!base)
return;
uart8250_mem_tx_flush(base);
}
|
