blob: e085e34230234eadf141062c8286353d05dfaa9d (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
|
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef CPU_INTEL_SPEEDSTEP_H
#define CPU_INTEL_SPEEDSTEP_H
#include <stdint.h>
/* Magic value used to locate speedstep configuration in the device tree */
#define SPEEDSTEP_APIC_MAGIC 0xACAC
/* MWAIT coordination I/O base address. This must match
* the \_PR_.CP00 PM base address.
*/
#define PMB0_BASE 0x510
/* PMB1: I/O port that triggers SMI once cores are in the same state.
* See CSM Trigger, at PMG_CST_CONFIG_CONTROL[6:4]
*/
#define PMB1_BASE 0x800
/* Speedstep related MSRs */
#define MSR_THERM2_CTL 0x19D
#define MSR_EBC_FREQUENCY_ID 0x2c
#define MSR_FSB_FREQ 0xcd
#define MSR_FSB_CLOCK_VCC 0xce
#define MSR_PKG_CST_CONFIG_CONTROL 0xe2
#define MSR_PMG_IO_BASE_ADDR 0xe3
#define MSR_PMG_IO_CAPTURE_ADDR 0xe4
#define MSR_EXTENDED_CONFIG 0xee
#define FREQ_LIMIT_RATIO 0x1AD
typedef struct {
uint8_t dynfsb : 1; /* whether this is SLFM */
uint8_t nonint : 1; /* add .5 to ratio */
uint8_t ratio : 6;
uint8_t vid;
uint8_t is_turbo;
uint8_t is_slfm;
uint32_t power;
} sst_state_t;
#define SPEEDSTEP_RATIO_SHIFT 8
#define SPEEDSTEP_RATIO_DYNFSB_SHIFT (7 + SPEEDSTEP_RATIO_SHIFT)
#define SPEEDSTEP_RATIO_DYNFSB (1 << SPEEDSTEP_RATIO_DYNFSB_SHIFT)
#define SPEEDSTEP_RATIO_NONINT_SHIFT (6 + SPEEDSTEP_RATIO_SHIFT)
#define SPEEDSTEP_RATIO_NONINT (1 << SPEEDSTEP_RATIO_NONINT_SHIFT)
#define SPEEDSTEP_RATIO_VALUE_MASK (0x1f << SPEEDSTEP_RATIO_SHIFT)
#define SPEEDSTEP_VID_MASK 0x3f
#define SPEEDSTEP_STATE_FROM_MSR(val, mask) ((sst_state_t){ \
0, /* dynfsb won't be read. */ \
((val & mask) & SPEEDSTEP_RATIO_NONINT) ? 1 : 0, \
(((val & mask) & SPEEDSTEP_RATIO_VALUE_MASK) \
>> SPEEDSTEP_RATIO_SHIFT), \
(val & mask) & SPEEDSTEP_VID_MASK, \
0, /* not turbo by default */ \
0, /* not slfm by default */ \
0 /* power is hardcoded in software. */ \
})
#define SPEEDSTEP_ENCODE_STATE(state) ( \
((uint16_t)(state).dynfsb << SPEEDSTEP_RATIO_DYNFSB_SHIFT) | \
((uint16_t)(state).nonint << SPEEDSTEP_RATIO_NONINT_SHIFT) | \
((uint16_t)(state).ratio << SPEEDSTEP_RATIO_SHIFT) | \
((uint16_t)(state).vid & SPEEDSTEP_VID_MASK))
#define SPEEDSTEP_DOUBLE_RATIO(state) ( \
((uint8_t)(state).ratio * 2) + (state).nonint)
typedef struct {
sst_state_t slfm;
sst_state_t min;
sst_state_t max;
sst_state_t turbo;
} sst_params_t;
/* Looking at core2's spec, the highest normal bus ratio for an eist enabled
processor is 14, the lowest is always 6. This makes 5 states with the
minimal step width of 2. With turbo mode and super LFM we have at most 7. */
#define SPEEDSTEP_MAX_NORMAL_STATES 5
#define SPEEDSTEP_MAX_STATES (SPEEDSTEP_MAX_NORMAL_STATES + 2)
typedef struct {
/* Table of p-states for EMTTM and ACPI by decreasing performance. */
sst_state_t states[SPEEDSTEP_MAX_STATES];
int num_states;
} sst_table_t;
void speedstep_gen_pstates(sst_table_t *);
#define SPEEDSTEP_MAX_POWER_YONAH 31000
#define SPEEDSTEP_MIN_POWER_YONAH 13100
#define SPEEDSTEP_MAX_POWER_MEROM 35000
#define SPEEDSTEP_MIN_POWER_MEROM 25000
#define SPEEDSTEP_SLFM_POWER_MEROM 12000
#define SPEEDSTEP_MAX_POWER_PENRYN 35000
#define SPEEDSTEP_MIN_POWER_PENRYN 15000
#define SPEEDSTEP_SLFM_POWER_PENRYN 12000
#endif /* CPU_INTEL_SPEEDSTEP_H */
|
