1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
|
/* SPDX-License-Identifier: GPL-2.0-only */
#ifndef PC80_MC146818RTC_H
#define PC80_MC146818RTC_H
#include <arch/io.h>
#include <types.h>
#define RTC_BASE_PORT 0x70
#define RTC_PORT(x) (RTC_BASE_PORT + (x))
/* control registers - Moto names
*/
#define RTC_REG_A 10
#define RTC_REG_B 11
#define RTC_REG_C 12
#define RTC_REG_D 13
/**********************************************************************
* register details
**********************************************************************/
#define RTC_FREQ_SELECT RTC_REG_A
/* update-in-progress - set to "1" 244 microsecs before RTC goes off the bus,
* reset after update (may take 1.984ms @ 32768Hz RefClock) is complete,
* totaling to a max high interval of 2.228 ms.
*/
# define RTC_UIP 0x80
# define RTC_DIV_CTL 0x70
/* divider control: refclock values 4.194 / 1.049 MHz / 32.768 kHz */
# define RTC_REF_CLCK_4MHZ 0x00
# define RTC_REF_CLCK_1MHZ 0x10
# define RTC_REF_CLCK_32KHZ 0x20
/* 2 values for divider stage reset, others for "testing purposes only" */
# define RTC_DIV_RESET1 0x60
# define RTC_DIV_RESET2 0x70
/* Periodic intr. / Square wave rate select. 0 = none,
* 1 = 32.8kHz,... 15 = 2Hz
*/
# define RTC_RATE_SELECT 0x0F
# define RTC_RATE_NONE 0x00
# define RTC_RATE_32786HZ 0x01
# define RTC_RATE_16384HZ 0x02
# define RTC_RATE_8192HZ 0x03
# define RTC_RATE_4096HZ 0x04
# define RTC_RATE_2048HZ 0x05
# define RTC_RATE_1024HZ 0x06
# define RTC_RATE_512HZ 0x07
# define RTC_RATE_256HZ 0x08
# define RTC_RATE_128HZ 0x09
# define RTC_RATE_64HZ 0x0a
# define RTC_RATE_32HZ 0x0b
# define RTC_RATE_16HZ 0x0c
# define RTC_RATE_8HZ 0x0d
# define RTC_RATE_4HZ 0x0e
# define RTC_RATE_2HZ 0x0f
/**********************************************************************/
#define RTC_CONTROL RTC_REG_B
# define RTC_SET 0x80 /* disable updates for clock setting */
# define RTC_PIE 0x40 /* periodic interrupt enable */
# define RTC_AIE 0x20 /* alarm interrupt enable */
# define RTC_UIE 0x10 /* update-finished interrupt enable */
# define RTC_SQWE 0x08 /* enable square-wave output */
# define RTC_DM_BINARY 0x04 /* all time/date values are BCD if clear */
# define RTC_24H 0x02 /* 24 hour mode - else hours bit 7 means pm */
# define RTC_DST_EN 0x01 /* auto switch DST - works f. USA only */
/**********************************************************************/
#define RTC_INTR_FLAGS RTC_REG_C
/* caution - cleared by read */
# define RTC_IRQF 0x80 /* any of the following 3 is active */
# define RTC_PF 0x40
# define RTC_AF 0x20
# define RTC_UF 0x10
/**********************************************************************/
#define RTC_VALID RTC_REG_D
# define RTC_VRT 0x80 /* valid RAM and time */
/**********************************************************************/
/* Date and Time in RTC CMOS */
#define RTC_CLK_SECOND 0
#define RTC_CLK_SECOND_ALARM 1
#define RTC_CLK_MINUTE 2
#define RTC_CLK_MINUTE_ALARM 3
#define RTC_CLK_HOUR 4
#define RTC_CLK_HOUR_ALARM 5
#define RTC_CLK_DAYOFWEEK 6
#define RTC_CLK_DAYOFMONTH 7
#define RTC_CLK_MONTH 8
#define RTC_CLK_YEAR 9
#define RTC_CLK_ALTCENTURY 0x32
/* On PCs, the checksum is built only over bytes 16..45 */
#define PC_CKS_RANGE_START 16
#define PC_CKS_RANGE_END 45
#define PC_CKS_LOC 46
/* Tracking of fallback/normal boot. */
#define RTC_BOOT_BYTE 48
#define RTC_BOOT_NORMAL 0x1
static inline unsigned char cmos_read(unsigned char addr)
{
int offs = 0;
if (addr >= 128) {
offs = 2;
addr -= 128;
}
outb(addr, RTC_BASE_PORT + offs + 0);
return inb(RTC_BASE_PORT + offs + 1);
}
static inline void cmos_write_inner(unsigned char val, unsigned char addr)
{
int offs = 0;
if (addr >= 128) {
offs = 2;
addr -= 128;
}
outb(addr, RTC_BASE_PORT + offs + 0);
outb(val, RTC_BASE_PORT + offs + 1);
}
static inline u8 cmos_disable_rtc(void)
{
u8 control_state = cmos_read(RTC_CONTROL);
if (!(control_state & RTC_SET))
cmos_write_inner(control_state | RTC_SET, RTC_CONTROL);
return control_state;
}
static inline void cmos_restore_rtc(u8 control_state)
{
if (!(control_state & RTC_SET))
cmos_write_inner(control_state, RTC_CONTROL);
}
static inline void cmos_write(unsigned char val, unsigned char addr)
{
u8 control_state;
/*
* There are various places where RTC bits might be hiding,
* eg. the Century / AltCentury byte. So to be safe, disable
* RTC before changing any value.
*/
if (addr != RTC_CONTROL)
control_state = cmos_disable_rtc();
cmos_write_inner(val, addr);
if (addr != RTC_CONTROL)
cmos_restore_rtc(control_state);
}
static inline u32 cmos_read32(u8 offset)
{
u32 value = 0;
u8 i;
for (i = 0; i < sizeof(value); ++i)
value |= cmos_read(offset + i) << (i << 3);
return value;
}
static inline void cmos_write32(u32 value, u8 offset)
{
u8 i;
for (i = 0; i < sizeof(value); ++i)
cmos_write((value >> (i << 3)) & 0xff, offset + i);
}
void cmos_init(bool invalid);
void cmos_check_update_date(void);
int cmos_error(void);
int cmos_lb_cks_valid(void);
int cmos_checksum_valid(int range_start, int range_end, int cks_loc);
void cmos_set_checksum(int range_start, int range_end, int cks_loc);
#endif /* PC80_MC146818RTC_H */
|
