1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <arch/io.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/mtrr.h>
#include <device/pci_def.h>
#include <southbridge/amd/sb600/sb600.h>
#define ADT7475_ADDRESS 0x2E
#define SMBUS_IO_BASE 0x1000
extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address);
extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address,
u8 val);
#define ADT7475_read_byte(address) \
do_smbus_read_byte(SMBUS_IO_BASE, ADT7475_ADDRESS, address)
#define ADT7475_write_byte(address, val) \
do_smbus_write_byte(SMBUS_IO_BASE, ADT7475_ADDRESS, address, val)
/********************************************************
* pistachio uses a BCM5787 as on-board NIC.
* It has a pin named LOW_POWER to enable it into LOW POWER state.
* In order to run NIC, we should let it out of Low power state. This pin is
* controlled by GPM8.
* RRG4.2.3 GPM as GPIO
* GPM pins can be used as GPIO. The GPM I/O functions is controlled by three registers:
* I/O C50, C51, C52, PM I/O94, 95, 96.
* RRG4.2.3.1 GPM pins as Input
* RRG4.2.3.2 GPM pins as Output
* The R77 (on BRASS) / R81 (on Bronze) is not load!
* So NIC can work whether this function runs.
********************************************************/
static void enable_onboard_nic(void)
{
u8 byte;
printk(BIOS_INFO, "%s.\n", __func__);
/* enable GPM8 output */
byte = pm_ioread(0x95);
byte &= 0xfe;
pm_iowrite(0x95, byte);
/* GPM8 outputs low. */
byte = pm_ioread(0x94);
byte &= 0xfe;
pm_iowrite(0x94, byte);
}
/*
* set thermal config
*/
static void set_thermal_config(void)
{
u8 byte, byte2;
u16 word;
u32 dword;
device_t sm_dev;
/* set adt7475 */
ADT7475_write_byte(0x40, 0x04);
/* Config Register 6 */
ADT7475_write_byte(0x10, 0x00);
/* Config Register 7 */
ADT7475_write_byte(0x11, 0x00);
/* set Offset 64 format, enable THERM on Remote 1& Remote 2 */
ADT7475_write_byte(0x7c, 0xa0);
/* No offset for remote 2 */
ADT7475_write_byte(0x72, 0x00);
/* PWM 1 configuration register CPU fan controlled by CPU Thermal Diode */
ADT7475_write_byte(0x5c, 0x02);
/* PWM 3 configuration register Case fan controlled by 690 temp */
ADT7475_write_byte(0x5e, 0x42);
/* remote 1 low temp limit */
ADT7475_write_byte(0x4e, 0x00);
/* remote 1 High temp limit (90C) */
ADT7475_write_byte(0x4f, 0x9a);
/* remote2 Low Temp Limit */
ADT7475_write_byte(0x52, 0x00);
/* remote2 High Limit (90C) */
ADT7475_write_byte(0x53, 0x9a);
/* remote 1 therm temp limit (95C) */
ADT7475_write_byte(0x6a, 0x9f);
/* remote 2 therm temp limit (95C) */
ADT7475_write_byte(0x6c, 0x9f);
/* PWM 1 minimum duty cycle (37%) */
ADT7475_write_byte(0x64, 0x60);
/* PWM 1 Maximum duty cycle (100%) */
ADT7475_write_byte(0x38, 0xff);
/* PWM 3 minimum duty cycle (37%) */
ADT7475_write_byte(0x66, 0x60);
/* PWM 3 Maximum Duty Cycle (100%) */
ADT7475_write_byte(0x3a, 0xff);
/* Remote 1 temperature Tmin (32C) */
ADT7475_write_byte(0x67, 0x60);
/* Remote 2 temperature Tmin (32C) */
ADT7475_write_byte(0x69, 0x60);
/* remote 1 Trange (53C ramp range) */
ADT7475_write_byte(0x5f, 0xe8);
/* remote 2 Trange (53C ramp range) */
ADT7475_write_byte(0x61, 0xe8);
/* PWM2 Duty cycle */
ADT7475_write_byte(0x65, 0x00);
/* PWM2 Disabled */
ADT7475_write_byte(0x5d, 0x80);
/* PWM2 Max Duty Cycle */
ADT7475_write_byte(0x39, 0x00);
/* Config Register 3 - enable smbalert & therm */
ADT7475_write_byte(0x78, 0x03);
/* Config Register 4 - enable therm output */
ADT7475_write_byte(0x7d, 0x09);
/* Interrupt Mask Register 2 - Mask SMB alert for Therm Conditions, Fan 2 fault, SmbAlert Fan for Therm Timer event */
ADT7475_write_byte(0x75, 0x2a);
/* Config Register 1 Set Start bit */
ADT7475_write_byte(0x40, 0x05);
/* Read status register to clear any old errors */
byte2 = ADT7475_read_byte(0x42);
byte = ADT7475_read_byte(0x41);
/* remote 1 temperature offset */
ADT7475_write_byte(0x70, 0x00);
printk(BIOS_INFO, "Init adt7475 end , status 0x42 %02x, status 0x41 %02x\n",
byte2, byte);
/* sb600 setting for thermal config. Set SB600 GPM5 to trigger ACPI event */
/* set GPM5 as GPM5, not DDR3_memory disable */
byte = pm_ioread(0x8f);
byte |= 1 << 6; /* enable GPE */
pm_iowrite(0x8f, byte);
/* GPM5 as GPIO not USB OC */
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
dword = pci_read_config32(sm_dev, 0x64);
dword |= 1 << 19;
pci_write_config32(sm_dev, 0x64, dword);
/* Enable Client Management Index/Data registers */
dword = pci_read_config32(sm_dev, 0x78);
dword |= 1 << 11; /* Cms_enable */
pci_write_config32(sm_dev, 0x78, dword);
/* MiscfuncEnable */
byte = pci_read_config8(sm_dev, 0x41);
byte |= (1 << 5);
pci_write_config8(sm_dev, 0x41, byte);
/* set GPM5 as input */
/* set index register 0C50h to 13h (miscellaneous control) */
outb(0x13, 0xC50); /* CMIndex */
/* set CM data register 0C51h bits [7:6] to 01b to set Input/Out control */
byte = inb(0xC51); /* CMData */
byte &= 0x3f;
byte |= 1 << 6;
outb(byte, 0xC51);
/* set GPM port 0C52h bit 5 to 1 to tri-state the GPM port */
byte = inb(0xc52); /* GpmPort */
byte |= 1 << 5;
outb(byte, 0xc52);
/* set CM data register 0C51h bits [7:6] to 00b to set GPM port for read */
byte = inb(0xc51);
byte &= 0x3f;
outb(byte, 0xc51);
/* trigger SCI/SMI */
byte = pm_ioread(0x34);
byte &= 0xcf;
pm_iowrite(0x34, byte);
/* set GPM5 to not wake from s5 */
byte = pm_ioread(0x77);
byte &= ~(1 << 5);
pm_iowrite(0x77, byte);
/* trigger on falling edge */
byte = pm_ioread(0x38);
byte &= ~(1 << 2);
pm_iowrite(0x38, byte);
/* set SB600 GPIO 64 to GPIO with pull-up */
byte = pm2_ioread(0x42);
byte &= 0x3f;
pm2_iowrite(0x42, byte);
/* set GPIO 64 to input */
word = pci_read_config16(sm_dev, 0x56);
word |= 1 << 7;
pci_write_config16(sm_dev, 0x56, word);
/* set GPIO 64 internal pull-up */
byte = pm2_ioread(0xf0);
byte &= 0xee;
pm2_iowrite(0xf0, byte);
/* set Talert to be active low */
byte = pm_ioread(0x67);
byte &= ~(1 << 5);
pm_iowrite(0x67, byte);
/* set Talert to generate ACPI event */
byte = pm_ioread(0x3c);
byte &= 0xf3;
pm_iowrite(0x3c, byte);
/* THERMTRIP pin */
/* byte = pm_ioread(0x68);
* byte |= 1 << 3;
* pm_iowrite(0x68, byte);
*
* byte = pm_ioread(0x55);
* byte |= 1 << 0;
* pm_iowrite(0x55, byte);
*
* byte = pm_ioread(0x67);
* byte &= ~( 1 << 6);
* pm_iowrite(0x67, byte);
*/
}
/*************************************************
* enable the dedicated function in pistachio board.
* This function called early than rs690_enable.
*************************************************/
static void pistachio_enable(device_t dev)
{
printk(BIOS_INFO, "Mainboard Pistachio Enable. dev=0x%p\n", dev);
enable_onboard_nic();
set_thermal_config();
}
struct chip_operations mainboard_ops = {
.enable_dev = pistachio_enable,
};
|
