1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
|
#define ASSEMBLY 1
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <arch/hlt.h>
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/x86/bist.h"
#include "cpu/x86/msr.h"
#include <cpu/amd/gx2def.h>
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
#include "southbridge/amd/cs5536/cs5536_early_smbus.c"
#include "southbridge/amd/cs5536/cs5536_early_setup.c"
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
#include "northbridge/amd/gx2/raminit.h"
static inline unsigned int fls(unsigned int x)
{
int r;
__asm__("bsfl %1,%0\n\t"
"jnz 1f\n\t"
"movl $32,%0\n"
"1:" : "=r" (r) : "g" (x));
return r;
}
static void sdram_set_spd_registers(const struct mem_controller *ctrl)
{
/* Total size of DIMM = 2^row address (byte 3) * 2^col address (byte 4) *
* component Banks (byte 17) * module banks, side (byte 5) *
* width in bits (byte 6,7)
* = Density per side (byte 31) * number of sides (byte 5) */
/* 1. Initialize GLMC registers base on SPD values, do one DIMM for now */
msr_t msr;
unsigned char module_banks, val;
msr = rdmsr(MC_CF07_DATA);
/* get module banks (sides) per dimm, SPD byte 5 */
module_banks = spd_read_byte(0xA0, 5);
if (module_banks < 1 || module_banks > 2)
print_err("Module banks per dimm\r\n");
module_banks >>= 1;
msr.hi &= ~(1 << CF07_UPPER_D0_MB_SHIFT);
msr.hi |= (module_banks << CF07_UPPER_D0_MB_SHIFT);
/* get component banks per module bank, SPD byte 17 */
val = spd_read_byte(0xA0, 17);
if (val < 2 || val > 4)
print_err("Component banks per module bank\r\n");
val >>= 2;
msr.hi &= ~(0x1 << CF07_UPPER_D0_CB_SHIFT);
msr.hi |= (val << CF07_UPPER_D0_CB_SHIFT);
/* get the module bank density, SPD byte 31 */
val = spd_read_byte(0xA0, 31);
val = fls(val);
val <<= module_banks;
msr.hi &= ~(0xf << CF07_UPPER_D0_SZ_SHIFT);
msr.hi |= (val << CF07_UPPER_D0_SZ_SHIFT);
/* page size = 2^col address */
val = spd_read_byte(0xA0, 4);
val -= 7;
msr.hi &= ~(0x7 << CF07_UPPER_D0_PSZ_SHIFT);
msr.hi |= (val << CF07_UPPER_D0_PSZ_SHIFT);
print_debug("computed msr.hi ");
print_debug_hex32(msr.hi);
print_debug("\r\n");
msr.lo = 0x00003000;
wrmsr(MC_CF07_DATA, msr);
msr = rdmsr(0x20000019);
msr.hi = 0x18000108;
msr.lo = 0x696332a3;
wrmsr(0x20000019, msr);
}
#include "northbridge/amd/gx2/raminit.c"
#include "sdram/generic_sdram.c"
#define PLLMSRhi 0x00001490
#define PLLMSRlo 0x02000030
#define PLLMSRlo1 ((0xde << 16) | (1 << 26) | (1 << 24))
#define PLLMSRlo2 ((1<<14) |(1<<13) | (1<<0))
#include "northbridge/amd/gx2/pll_reset.c"
#include "cpu/amd/model_gx2/cpureginit.c"
#include "cpu/amd/model_gx2/syspreinit.c"
static void msr_init(void)
{
/* total physical memory */
__builtin_wrmsr(0x1808, 0x10f3bf00, 0x22fffc02);
/* traditional memory 0kB-512kB, 512kB-1MB */
__builtin_wrmsr(0x10000020, 0xfff80, 0x20000000);
__builtin_wrmsr(0x10000021, 0x80fffe0, 0x20000000);
__builtin_wrmsr(0x40000020, 0xfff80, 0x20000000);
__builtin_wrmsr(0x40000021, 0x80fffe0, 0x20000000);
/* put code in northbridge[init].c here */
}
static void main(unsigned long bist)
{
static const struct mem_controller memctrl [] = {
{.channel0 = {(0xa<<3)|0, (0xa<<3)|1}}
};
SystemPreInit();
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
cs5536_early_setup();
pll_reset();
cpuRegInit();
print_err("done cpuRegInit\n");
sdram_initialize(1, memctrl);
msr_init();
/* Check all of memory */
//ram_check(0x00000000, 640*1024);
}
|
