1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2010 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <arch/io.h>
#include <boot/tables.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/mtrr.h>
#include <device/pci_def.h>
#include "southbridge/amd/sb700/sb700.h"
#include "southbridge/amd/sb700/smbus.h"
void set_pcie_dereset(void);
void set_pcie_reset(void);
u8 is_dev3_present(void);
static void pcie_rst_toggle(u8 val) {
u8 byte;
byte = pm_ioread(0x8d);
byte &= ~(3 << 1);
pm_iowrite(0x8d, byte);
byte = pm_ioread(0x94);
/* Output enable */
byte &= ~(3 << 2);
/* Toggle GPM8, GPM9 */
byte &= ~(3 << 0);
byte |= val;
pm_iowrite(0x94, byte);
}
void set_pcie_dereset()
{
pcie_rst_toggle(0x3);
}
void set_pcie_reset()
{
pcie_rst_toggle(0x0);
}
#if 0 /* not tested yet */
/********************************************************
* mahogany uses SB700 GPIO9 to detect IDE_DMA66.
* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to
* get the cable type, 40 pin or 80 pin?
********************************************************/
static void get_ide_dma66(void)
{
u8 byte;
/*u32 sm_dev, ide_dev; */
device_t sm_dev, ide_dev;
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
byte = pci_read_config8(sm_dev, 0xA9);
byte |= (1 << 5); /* Set Gpio9 as input */
pci_write_config8(sm_dev, 0xA9, byte);
ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1));
byte = pci_read_config8(ide_dev, 0x56);
byte &= ~(7 << 0);
if ((1 << 5) & pci_read_config8(sm_dev, 0xAA))
byte |= 2 << 0; /* mode 2 */
else
byte |= 5 << 0; /* mode 5 */
pci_write_config8(ide_dev, 0x56, byte);
}
#endif /* get_ide_dma66 */
u8 is_dev3_present(void)
{
return 0;
}
/*************************************************
* enable the dedicated function in mahogany board.
* This function called early than rs780_enable.
*************************************************/
static void mb_enable(device_t dev)
{
printk(BIOS_INFO, "Mainboard 939A785GMH/128M Enable. dev=0x%p\n", dev);
setup_uma_memory();
set_pcie_dereset();
/* get_ide_dma66(); */
}
int add_mainboard_resources(struct lb_memory *mem)
{
return 0;
}
struct chip_operations mainboard_ops = {
CHIP_NAME("Asrock 939A785GMH/128M Mainboard")
.enable_dev = mb_enable,
};
/* override the default SATA PHY setup */
void sb7xx_51xx_setup_sata_phys(struct device *dev) {
/* RPR7.6.1 Program the PHY Global Control to 0x2C00 */
pci_write_config16(dev, 0x86, 0x2c00);
/* RPR7.6.2 SATA GENI PHY ports setting */
pci_write_config32(dev, 0x88, 0x01B48016);
pci_write_config32(dev, 0x8c, 0x01B48016);
pci_write_config32(dev, 0x90, 0x01B48016);
pci_write_config32(dev, 0x94, 0x01B48016);
pci_write_config32(dev, 0x98, 0x01B48016);
pci_write_config32(dev, 0x9C, 0x01B48016);
/* RPR7.6.3 SATA GEN II PHY port setting for port [0~5]. */
pci_write_config16(dev, 0xA0, 0xA07A);
pci_write_config16(dev, 0xA2, 0xA07A);
pci_write_config16(dev, 0xA4, 0xA07A);
pci_write_config16(dev, 0xA6, 0xA07A);
pci_write_config16(dev, 0xA8, 0xA07A);
pci_write_config16(dev, 0xAA, 0xA0FF);
}
|
