summaryrefslogtreecommitdiff
path: root/src/mainboard/asrock/h110m/devicetree.cb
blob: 9ff8ceb62d8e25969de8e3cd6d9b6ffa2d9e506c (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
## SPDX-License-Identifier: GPL-2.0-only

chip soc/intel/skylake

	register "deep_s3_enable_ac" = "0"
	register "deep_s3_enable_dc" = "0"
	register "deep_s5_enable_ac" = "0"
	register "deep_s5_enable_dc" = "0"
	register "deep_sx_config" = "DSX_EN_WAKE_PIN"

	register "eist_enable" = "1"

	# GPE configuration
	# Note that GPE events called out in ASL code rely on this
	# route. i.e. If this route changes then the affected GPE
	# offset bits also need to be changed.
	register "gpe0_dw0" = "GPP_B"
	register "gpe0_dw1" = "GPP_D"
	register "gpe0_dw2" = "GPP_E"

	# Set @0x280-0x2ff I/O Range for SuperIO HWM
	register "gen1_dec" = "0x007c0281"

	# Enable "Intel Speed Shift Technology"
	register "speed_shift_enable" = "1"

	# Enable DPTF
	register "dptf_enable" = "1"

	# FSP Configuration
	register "SmbusEnable" = "1"
	register "ScsEmmcEnabled" = "0"
	register "ScsEmmcHs400Enabled" = "0"
	register "ScsSdCardEnabled" = "0"
	register "HeciEnabled" = "0"
	register "SkipExtGfxScan" = "0"
	register "PrimaryDisplay" = "Display_PEG"
	register "Device4Enable" = "1"
	register "SaGv" = "SaGv_Enabled"
	register "PmTimerDisabled" = "0"
	register "EnableAzalia" = "1"
	register "DspEnable" = "0"
	register "PchHdaVcType" = "Vc1"

	register "pirqa_routing" = "PCH_IRQ11"
	register "pirqb_routing" = "PCH_IRQ10"
	register "pirqc_routing" = "PCH_IRQ11"
	register "pirqd_routing" = "PCH_IRQ11"
	register "pirqe_routing" = "PCH_IRQ11"
	register "pirqf_routing" = "PCH_IRQ11"
	register "pirqg_routing" = "PCH_IRQ11"
	register "pirqh_routing" = "PCH_IRQ11"

	# Set LPC Serial IRQ mode
	register "serirq_mode" = "SERIRQ_CONTINUOUS"

	# Enabling SLP_S3#, SLP_S4#, SLP_SUS and SLP_A Stretch
	# SLP_S3 Minimum Assertion Width. Values 0: 60us, 1: 1ms, 2: 50ms, 3: 2s
	register "PmConfigSlpS3MinAssert" = "0x02"

	# SLP_S4 Minimum Assertion Width. Values 0: default, 1: 1s, 2: 2s, 3: 3s, 4: 4s
	register "PmConfigSlpS4MinAssert" = "0x04"

	# SLP_SUS Minimum Assertion Width. Values 0: 0ms, 1: 500ms, 2: 1s, 3: 4s
	register "PmConfigSlpSusMinAssert" = "0x03"

	# SLP_A Minimum Assertion Width. Values 0: 0ms, 1: 4s, 2: 98ms, 3: 2s
	register "PmConfigSlpAMinAssert" = "0x03"

	# VR Settings Configuration
	#+----------------+-------+-------+-------------+-------+
	#| Domain/Setting |  SA   |  IA   | GT Unsliced |  GT   |
	#+----------------+-------+-------+-------------+-------+
	#| Psi1Threshold  | 20A   | 20A   | 20A         | 20A   |
	#| Psi2Threshold  | 4A    | 5A    | 5A          | 5A    |
	#| Psi3Threshold  | 1A    | 1A    | 1A          | 1A    |
	#| Psi3Enable     | 1     | 1     | 1           | 1     |
	#| Psi4Enable     | 1     | 1     | 1           | 1     |
	#| ImonSlope      | 0     | 0     | 0           | 0     |
	#| ImonOffset     | 0     | 0     | 0           | 0     |
	#| IccMax*        | 0     | 0     | 0           | 0     |
	#| VrVoltageLimit | 1.52V | 1.52V | 1.52V       | 1.52V |
	#+----------------+-------+-------+-------------+-------+
	# * - is set automatically in the vr_config.c
	register "domain_vr_config[VR_SYSTEM_AGENT]" = "{
		.vr_config_enable = 1, \
		.psi1threshold = VR_CFG_AMP(20), \
		.psi2threshold = VR_CFG_AMP(4), \
		.psi3threshold = VR_CFG_AMP(1), \
		.psi3enable = 1, \
		.psi4enable = 1, \
		.imon_slope = 0x0, \
		.imon_offset = 0x0, \
		.icc_max = 0x0, \
		.voltage_limit = 1520 \
	}"

	register "domain_vr_config[VR_IA_CORE]" = "{
		.vr_config_enable = 1, \
		.psi1threshold = VR_CFG_AMP(20), \
		.psi2threshold = VR_CFG_AMP(5), \
		.psi3threshold = VR_CFG_AMP(1), \
		.psi3enable = 1, \
		.psi4enable = 1, \
		.imon_slope = 0x0, \
		.imon_offset = 0x0, \
		.icc_max = 0x0, \
		.voltage_limit = 1520 \
	}"

	register "domain_vr_config[VR_GT_UNSLICED]" = "{
		.vr_config_enable = 1, \
		.psi1threshold = VR_CFG_AMP(20), \
		.psi2threshold = VR_CFG_AMP(5), \
		.psi3threshold = VR_CFG_AMP(1), \
		.psi3enable = 1, \
		.psi4enable = 1, \
		.imon_slope = 0x0, \
		.imon_offset = 0x0, \
		.icc_max = 0x0 ,\
		.voltage_limit = 1520 \
	}"

	register "domain_vr_config[VR_GT_SLICED]" = "{
		.vr_config_enable = 1, \
		.psi1threshold = VR_CFG_AMP(20), \
		.psi2threshold = VR_CFG_AMP(5), \
		.psi3threshold = VR_CFG_AMP(1), \
		.psi3enable = 1, \
		.psi4enable = 1, \
		.imon_slope = 0x0, \
		.imon_offset = 0x0, \
		.icc_max = 0x0, \
		.voltage_limit = 1520 \
	}"

	register "EnableLan" = "0"
	register "PmTimerDisabled" = "0"

	# USB
	register "usb2_ports[0]" = "USB2_PORT_MID(OC0)"
	register "usb2_ports[1]" = "USB2_PORT_MID(OC0)"
	register "usb2_ports[2]" = "USB2_PORT_MID(OC4)"
	register "usb2_ports[3]" = "USB2_PORT_MID(OC4)"
	register "usb2_ports[4]" = "USB2_PORT_MID(OC2)"
	register "usb2_ports[5]" = "USB2_PORT_MID(OC2)"
	register "usb2_ports[6]" = "USB2_PORT_MID(OC0)"
	register "usb2_ports[7]" = "USB2_PORT_MID(OC0)"
	register "usb2_ports[8]" = "USB2_PORT_MID(OC0)"
	register "usb2_ports[9]" = "USB2_PORT_MID(OC0)"
	register "usb2_ports[10]" = "USB2_PORT_MID(OC1)"
	register "usb2_ports[11]" = "USB2_PORT_MID(OC1)"
	register "usb2_ports[12]" = "USB2_PORT_MID(OC_SKIP)"
	register "usb2_ports[13]" = "USB2_PORT_MID(OC_SKIP)"
	register "usb3_ports[0]" = "USB3_PORT_DEFAULT(OC0)"
	register "usb3_ports[1]" = "USB3_PORT_DEFAULT(OC0)"
	register "usb3_ports[2]" = "USB3_PORT_DEFAULT(OC3)"
	register "usb3_ports[3]" = "USB3_PORT_DEFAULT(OC3)"
	register "usb3_ports[4]" = "USB3_PORT_DEFAULT(OC1)"
	register "usb3_ports[5]" = "USB3_PORT_DEFAULT(OC1)"
	register "usb3_ports[6]" = "USB3_PORT_DEFAULT(OC_SKIP)"
	register "usb3_ports[7]" = "USB3_PORT_DEFAULT(OC_SKIP)"
	register "usb3_ports[8]" = "USB3_PORT_DEFAULT(OC_SKIP)"
	register "usb3_ports[9]" = "USB3_PORT_DEFAULT(OC_SKIP)"

	# SATA
	register "EnableSata" = "1"
	register "SataSalpSupport" = "1"
	# SATA4 and SATA5 are located in the lower right corner of the board,
	# but they are not populated. This is because the same PCB is used to
	# make boards with better PCHs, which can have up to six SATA ports.
	# However, the H110 PCH only has four SATA ports, which explains why
	# two connectors are missing.
	register "SataPortsEnable" = "{ \
		[0]     = 1, \
		[1]     = 1, \
		[2]     = 1, \
		[3]     = 1, \
		[4]     = 0, \
		[5]     = 0, \
		[6]     = 0, \
		[7]     = 0, \
	}"

	# PCH UART, SPI, I2C
	register "SerialIoDevMode" = "{ \
		[PchSerialIoIndexI2C0]  = PchSerialIoDisabled, \
		[PchSerialIoIndexI2C1]  = PchSerialIoDisabled, \
		[PchSerialIoIndexI2C2]  = PchSerialIoDisabled, \
		[PchSerialIoIndexI2C3]  = PchSerialIoDisabled, \
		[PchSerialIoIndexI2C4]  = PchSerialIoDisabled, \
		[PchSerialIoIndexI2C5]  = PchSerialIoDisabled, \
		[PchSerialIoIndexSpi0]  = PchSerialIoDisabled, \
		[PchSerialIoIndexSpi1]  = PchSerialIoDisabled, \
		[PchSerialIoIndexUart0] = PchSerialIoDisabled, \
		[PchSerialIoIndexUart1] = PchSerialIoDisabled, \
		[PchSerialIoIndexUart2] = PchSerialIoDisabled, \
	}"

	# Set params for PEG 0:1:0
	register "Peg0MaxLinkWidth" = "Peg0_x16"
	# Configure PCIe clockgen in PCH
	# PEG0 uses SRCCLKREQ0 and CLKSRC0
	register "PcieRpClkReqSupport[0]" = "1"
	register "PcieRpClkReqNumber[0]" = "0"
	register "PcieRpClkSrcNumber[0]" = "0"

	# Enable Root port 6(x1) for LAN.
	register "PcieRpEnable[5]" = "1"
	# Disable CLKREQ#, since onboard LAN is always present
	register "PcieRpClkReqSupport[5]" = "0"
	# Enable Advanced Error Reporting
	register "PcieRpAdvancedErrorReporting[5]" = "1"
	# Enable Latency Tolerance Reporting Mechanism
	register "PcieRpLtrEnable[5]" = "1"
	# Use CLK SRC 1
	register "PcieRpClkSrcNumber[5]" = "1"

	# Enable Root port 5 (x1) for PCIE slot.
	register "PcieRpEnable[4]" = "1"
	# Enable CLKREQ#
	register "PcieRpClkReqSupport[4]" = "1"
	# Use SRCCLKREQ2#
	register "PcieRpClkReqNumber[4]" = "2"
	# Enable Advanced Error Reporting
	register "PcieRpAdvancedErrorReporting[4]" = "1"
	# Enable Latency Tolerance Reporting Mechanism
	register "PcieRpLtrEnable[4]" = "1"
	# Use CLK SRC 2
	register "PcieRpClkSrcNumber[4]" = "2"
	# Use Hot Plug subsystem
	register "PcieRpHotPlug[4]" = "1"

	# Enable Root port 7(x1) for PCIE slot.
	register "PcieRpEnable[6]" = "1"
	# Enable CLKREQ#
	register "PcieRpClkReqSupport[6]" = "1"
	# Use SRCCLKREQ3#
	register "PcieRpClkReqNumber[6]" = "3"
	# Enable Advanced Error Reporting
	register "PcieRpAdvancedErrorReporting[6]" = "1"
	# Enable Latency Tolerance Reporting Mechanism
	register "PcieRpLtrEnable[6]" = "1"
	# Use CLK SRC 3
	register "PcieRpClkSrcNumber[6]" = "3"
	# Use Hot Plug subsystem
	register "PcieRpHotPlug[6]" = "1"

	# PL2 override 91W
	register "tdp_pl2_override" = "91"

	# Send an extra VR mailbox command for the PS4 exit issue
	register "SendVrMbxCmd" = "2"

	device cpu_cluster 0 on
		device lapic 0 on end
	end
	device domain 0 on
		device pci 00.0 on # Host Bridge
			subsystemid 0x1849 0x191f
		end
		device pci 01.0 on # PEG
			subsystemid 0x1849 0x1901
		end
		device pci 02.0 on # Integrated Graphics Device
			subsystemid 0x1849 0x1912
		end
		device pci 04.0 on  end # Thermal Subsystem
		device pci 08.0 off end # Gaussian Mixture Model
		device pci 14.0 on # USB xHCI
			subsystemid 0x1849 0xa131
		end
		device pci 14.1 off end # USB xDCI (OTG)
		device pci 14.2 on # Thermal Subsystem
			subsystemid 0x1849 0xa131
		end
		device pci 15.0 off end # I2C #0
		device pci 15.1 off end # I2C #1
		device pci 15.2 off end # I2C #2
		device pci 15.3 off end # I2C #3
		device pci 16.0 on # Management Engine Interface 1
			subsystemid 0x1849 0xa131
		end
		device pci 16.1 off end # Management Engine Interface 2
		device pci 16.2 off end # Management Engine IDE-R
		device pci 16.3 off end # Management Engine KT Redirection
		device pci 16.4 off end # Management Engine Interface 3
		device pci 17.0 on # SATA
			subsystemid 0x1849 0xa102
		end
		device pci 19.0 off end # UART #2
		device pci 19.1 off end # I2C #5
		device pci 19.2 off end # I2C #4
		device pci 1c.0 on  end # PCI Express Port 1
		device pci 1c.1 off end # PCI Express Port 2
		device pci 1c.2 off end # PCI Express Port 3
		device pci 1c.3 off end # PCI Express Port 4
		device pci 1c.4 on  end # PCI Express Port 5
		device pci 1c.5 on  end # PCI Express Port 6
		device pci 1c.6 on  end # PCI Express Port 7
		device pci 1c.7 off end # PCI Express Port 8
		device pci 1d.0 off end # PCI Express Port 9
		device pci 1d.1 off end # PCI Express Port 10
		device pci 1d.2 off end # PCI Express Port 11
		device pci 1d.3 off end # PCI Express Port 12
		device pci 1e.0 off end # UART #0
		device pci 1e.1 off end # UART #1
		device pci 1e.2 off end # GSPI #0
		device pci 1e.3 off end # GSPI #1
		device pci 1e.4 off end # eMMC
		device pci 1e.5 off end # SDIO
		device pci 1e.6 off end # SDCard
		device pci 1f.0 on # LPC bridge
			subsystemid 0x1849 0x1a43

			chip superio/common
				device pnp 2e.0 on # passes SIO base addr to SSDT gen

					chip superio/nuvoton/nct6791d
						device pnp 2e.1   on
							# Global Control Registers
							# Device IRQ Polarity
							irq 0x13 = 0x00
							irq 0x14 = 0x00
							# Global Option
							irq 0x24 = 0xfb
							irq 0x27 = 0x10
							# Multi Function
							irq 0x1a = 0xb0
							irq 0x1b = 0xe6
							irq 0x2a = 0x04
							irq 0x2c = 0x40
							irq 0x2d = 0x03

							# Parallel Port
							io  0x60 = 0x0378
							irq 0x70 = 7
							drq 0x74 = 4      # No DMA
							irq 0xf0 = 0x3c   # Printer mode
						end
						device pnp 2e.2   on      # UART A
							io  0x60 = 0x03f8
							irq 0x70 = 4
						end
						device pnp 2e.3   on      # IR
							io  0x60 = 0x02f8
							irq 0x70 = 3
						end
						device pnp 2e.5   on      # PS/2 KBC
							io  0x60 = 0x0060
							io  0x62 = 0x0064
							irq 0x70 = 1      # Keyboard
							irq 0x72 = 12     # Mouse
						end
						device pnp 2e.6   off end # CIR
						device pnp 2e.7   on      # GPIO6
							irq 0xf6 = 0xff
							irq 0xf7 = 0xff
							irq 0xf8 = 0xff
						end
						device pnp 2e.107 on      # GPIO7
							irq 0xe0 = 0x7f
							irq 0xe1 = 0x0d
						end
						device pnp 2e.207 on      # GPIO8
							irq 0xe6 = 0xff
							irq 0xe7 = 0xff
							irq 0xed = 0xff
						end
						device pnp 2e.8   off end # WDT
						device pnp 2e.108 on  end # GPIO0
						device pnp 2e.308 off end # GPIO base
						device pnp 2e.408 off end # WDTMEM
						device pnp 2e.708 on  end # GPIO1
						device pnp 2e.9   on  end # GPIO2
						device pnp 2e.109 on      # GPIO3
							irq 0xe4 = 0x7b
							irq 0xe5 = 0x02
							irq 0xea = 0x04
						end
						device pnp 2e.209 on      # GPIO4
							irq 0xf0 = 0x7f
							irq 0xf1 = 0x80
						end
						device pnp 2e.309 on      # GPIO5
							irq 0xf4 = 0xdf
							irq 0xf5 = 0xd5
						end
						device pnp 2e.a   on
							# Power RAM in S3 and let the PCH
							# handle power failure actions
							irq 0xe4 = 0x70
							# Set HWM reset source to LRESET#
							irq 0xe7 = 0x01
						end # ACPI
						device pnp 2e.b   on      # HWM, LED
							io  0x60 = 0x0290
							io  0x62 = 0
							irq 0x70 = 0
						end
						device pnp 2e.d   off end # BCLK, WDT2, WDT_MEM
						device pnp 2e.e   off end # CIR wake-up
						device pnp 2e.f   off end # GPIO PP/OD
						device pnp 2e.14  off end # SVID, Port 80 UART
						device pnp 2e.16  off end # DS5
						device pnp 2e.116 off end # DS3
						device pnp 2e.316 on  end # PCHDSW
						device pnp 2e.416 off end # DSWWOPT
						device pnp 2e.516 on  end # DS3OPT
						device pnp 2e.616 on  end # DSDSS
						device pnp 2e.716 off end # DSPU
					end # chip superio/nuvoton/nct6791d

				end # device pnp 2e.0
			end # chip superio/common

			chip drivers/pc80/tpm
				device pnp 4e.0 on end  # TPM module
			end
		end # LPC Interface
		device pci 1f.1 on  end # P2SB
		device pci 1f.2 on  end # Power Management Controller
		device pci 1f.3 on  end # Intel HDA
		device pci 1f.4 on  end # SMBus
		device pci 1f.5 on  end # PCH SPI
		device pci 1f.6 off end # GbE
	end
end