1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2012 Advanced Micro Devices, Inc.
* Copyright (C) 2016 Edward O'Callaghan <funfunctor@folklore1984.net>
* Copyright (C) 2017 Damien Zammit <damien@zamaudio.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <stdint.h>
#include <string.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pci_ops.h>
#include <commonlib/loglevel.h>
#include <northbridge/amd/agesa/state_machine.h>
#include <southbridge/amd/agesa/hudson/hudson.h>
#include <superio/ite/common/ite.h>
#include <superio/ite/it8728f/it8728f.h>
#define SB_MMIO 0xFED80000
#define SB_MMIO_MISC32(x) *(volatile u32 *)(SB_MMIO + 0xE00 + (x))
#define SERIAL_DEV PNP_DEV(0x2e, IT8728F_SP1)
#define GPIO_DEV PNP_DEV(0x2e, IT8728F_GPIO)
#define CLKIN_DEV PNP_DEV(0x2e, IT8728F_GPIO)
static void sbxxx_enable_48mhzout(void)
{
/* most likely programming to 48MHz out signal */
/* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */
u32 reg32;
reg32 = SB_MMIO_MISC32(0x28);
reg32 &= 0xfff8ffff;
SB_MMIO_MISC32(0x28) = reg32;
/* Enable Auxiliary Clock1, disable FCH 14 MHz OscClk */
reg32 = SB_MMIO_MISC32(0x40);
reg32 &= 0xffffbffb;
SB_MMIO_MISC32(0x40) = reg32;
}
void board_BeforeAgesa(struct sysinfo *cb)
{
u8 byte;
/* Enable the AcpiMmio space */
outb(0x24, 0xcd6);
outb(0x1, 0xcd7);
/* Set LPC decode enables. */
pci_devfn_t dev = PCI_DEV(0, 0x14, 3);
pci_write_config32(dev, 0x44, 0xff03ffd5);
if (CONFIG(POST_DEVICE_PCI_PCIE))
hudson_pci_port80();
if (CONFIG(POST_DEVICE_LPC))
hudson_lpc_port80();
/* enable SIO LPC decode */
byte = pci_read_config8(dev, 0x48);
byte |= 3; /* 2e, 2f */
pci_write_config8(dev, 0x48, byte);
/* enable serial decode */
byte = pci_read_config8(dev, 0x44);
byte |= (1 << 6); /* 0x3f8 */
pci_write_config8(dev, 0x44, byte);
/* run ite */
sbxxx_enable_48mhzout();
ite_conf_clkin(CLKIN_DEV, ITE_UART_CLK_PREDIVIDE_48);
ite_kill_watchdog(GPIO_DEV);
ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
}
|