summaryrefslogtreecommitdiff
path: root/src/mainboard/biostar/am1ml/bootblock.c
blob: 771745e9bdc712341c84926f5c366cb4a8be257b (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
/*
 * This file is part of the coreboot project.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <amdblocks/acpimmio.h>
#include <bootblock_common.h>
#include <device/pnp_ops.h>
#include <superio/ite/common/ite.h>
#include <superio/ite/it8728f/it8728f.h>

#define SERIAL_DEV	PNP_DEV(0x2e, IT8728F_SP1)
#define GPIO_DEV	PNP_DEV(0x2e, IT8728F_GPIO)
#define ENVC_DEV	PNP_DEV(0x2e, IT8728F_EC)

static void ite_evc_conf(pnp_devfn_t dev)
{
	pnp_enter_conf_state(dev);
	pnp_set_logical_device(dev);
	pnp_write_config(dev, 0xf1, 0x40);
	pnp_write_config(dev, 0xf4, 0x80);
	pnp_write_config(dev, 0xf5, 0x00);
	pnp_write_config(dev, 0xf6, 0xf0);
	pnp_write_config(dev, 0xf9, 0x48);
	pnp_write_config(dev, 0xfa, 0x00);
	pnp_write_config(dev, 0xfb, 0x00);
	pnp_exit_conf_state(dev);
}

static void ite_gpio_conf(pnp_devfn_t dev)
{
	pnp_enter_conf_state(dev);
	pnp_set_logical_device(dev);
	pnp_write_config(dev, 0x25, 0x80);
	pnp_write_config(dev, 0x26, 0x07);
	pnp_write_config(dev, 0x28, 0x81);
	pnp_write_config(dev, 0x2c, 0x06);
	pnp_write_config(dev, 0x72, 0x00);
	pnp_write_config(dev, 0x73, 0x00);
	pnp_write_config(dev, 0xb3, 0x01);
	pnp_write_config(dev, 0xb8, 0x00);
	pnp_write_config(dev, 0xc0, 0x00);
	pnp_write_config(dev, 0xc3, 0x00);
	pnp_write_config(dev, 0xc8, 0x00);
	pnp_write_config(dev, 0xc9, 0x07);
	pnp_write_config(dev, 0xcb, 0x01);
	pnp_write_config(dev, 0xf0, 0x10);
	pnp_write_config(dev, 0xf4, 0x27);
	pnp_write_config(dev, 0xf8, 0x20);
	pnp_write_config(dev, 0xf9, 0x01);
	pnp_exit_conf_state(dev);
}

void bootblock_mainboard_early_init(void)
{
	u32 reg32;

	/* Disable PCI-PCI bridge and release GPIO32/33 for other uses. */
	pm_write8(0xea, 0x1);

	/* Set auxiliary output clock frequency on OSCOUT1 pin to be 48MHz */
	reg32 = misc_read32(0x28);
	reg32 &= 0xfff8ffff;
	misc_write32(0x28, reg32);

	/* Enable Auxiliary Clock1, disable FCH 14 MHz OscClk */
	reg32 = misc_read32(0x40);
	reg32 &= 0xffffbffb;
	misc_write32(0x49, reg32);

	/* Configure SIO as made under vendor BIOS */
	ite_evc_conf(ENVC_DEV);
	ite_gpio_conf(GPIO_DEV);

	/* Enable serial output on it8728f */
	ite_kill_watchdog(GPIO_DEV);
	ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
}