1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
|
/*
* Placeholder for Cubieboard romstage
*
* Copyright (C) 2013 Alexandru Gagniuc <mr.nuke.me@gmail.com>
* Subject to the GNU GPL v2, or (at your option) any later version.
*/
#include <console/console.h>
#include <cpu/allwinner/a10/clock.h>
#include <cpu/allwinner/a10/gpio.h>
#include <cpu/allwinner/a10/twi.h>
#define __SIMPLE_DEVICE__
#include <device/device.h>
#include <drivers/xpowers/axp209/axp209.h>
#include <drivers/xpowers/axp209/chip.h>
#define GPB_TWI0_FUNC 2
#define GPB_TWI0_PINS ((1 << 0) | (1 << 1))
#define AXP209_BUS 0
static enum cb_err cubieboard_setup_power(void)
{
enum cb_err err;
const struct device * pmu;
const struct drivers_xpowers_axp209_config *cfg;
/* Find the AXP209 in devicetree */
pmu = dev_find_slot_on_smbus(AXP209_BUS, AXP209_I2C_ADDR);
if (!pmu) {
printk(BIOS_ERR, "AXP209 not found in devicetree.cb\n");
return CB_ERR;
}
cfg = pmu->chip_info;
/* Mux TWI0 pins */
gpio_set_multipin_func(GPB, GPB_TWI0_PINS, GPB_TWI0_FUNC);
/* Enable TWI0 */
a1x_periph_clock_enable(A1X_CLKEN_TWI0);
a1x_twi_init(AXP209_BUS, 400000);
if ((err = axp209_init(AXP209_BUS)) != CB_SUCCESS) {
printk(BIOS_ERR, "PMU initialization failed\n");
return err;
}
if ((err = axp209_set_voltages(AXP209_BUS, cfg)) != CB_SUCCESS) {
printk(BIOS_WARNING, "Power setup incomplete: "
"CPU may hang when increasing clock\n");
return err;
}
printk(BIOS_SPEW, "VDD CPU (DCDC2): %imv\n", cfg->dcdc2_voltage_mv);
printk(BIOS_SPEW, "VDD DLL (DCDC3): %imv\n", cfg->dcdc3_voltage_mv);
printk(BIOS_SPEW, "AVCC (LDO2) : %imv\n", cfg->ldo2_voltage_mv);
printk(BIOS_SPEW, "CSI1-IO (LDO4) : %imv\n", cfg->ldo4_voltage_mv);
printk(BIOS_SPEW, "(LDO3) : %imv\n", cfg->ldo3_voltage_mv);
return CB_SUCCESS;
}
void main(void)
{
console_init();
printk(BIOS_INFO, "You have managed to succesfully load romstage.\n");
/* Configure power rails */
cubieboard_setup_power();
}
|
