1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007-2008 coresystems GmbH
* Copyright (C) 2016 Arthur Heymans arthur@aheymans.xyz
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <stdint.h>
#include <device/pci_ops.h>
#include <device/pci_def.h>
#include <cpu/x86/lapic.h>
#include <superio/ite/it8718f/it8718f.h>
#include <superio/ite/common/ite.h>
#include <console/console.h>
#include <cpu/x86/bist.h>
#include <cpu/intel/romstage.h>
#include <northbridge/intel/i945/i945.h>
#include <northbridge/intel/i945/raminit.h>
#include <southbridge/intel/i82801gx/i82801gx.h>
#include <southbridge/intel/common/pmclib.h>
#define SERIAL_DEV PNP_DEV(0x2e, IT8718F_SP1)
#define GPIO_DEV PNP_DEV(0x2e, IT8718F_GPIO)
#define EC_DEV PNP_DEV(0x2e, IT8718F_EC)
#define SUPERIO_DEV PNP_DEV(0x2e, 0)
static void setup_sio(void)
{
/* Set default GPIOs on superio */
ite_reg_write(GPIO_DEV, 0x25, 0x40);
ite_reg_write(GPIO_DEV, 0x26, 0x3f);
ite_reg_write(GPIO_DEV, 0x28, 0x41);
ite_reg_write(GPIO_DEV, 0x29, 0x88);
ite_reg_write(GPIO_DEV, 0x2c, 0x1c);
ite_reg_write(GPIO_DEV, 0x62, 0x08);
ite_kill_watchdog(GPIO_DEV);
ite_reg_write(GPIO_DEV, 0xb1, 0x01);
ite_reg_write(GPIO_DEV, 0xb8, 0x80);
ite_reg_write(GPIO_DEV, 0xbb, 0x40);
ite_reg_write(GPIO_DEV, 0xc0, 0x00);
ite_reg_write(GPIO_DEV, 0xc3, 0x00);
ite_reg_write(GPIO_DEV, 0xc8, 0x00);
ite_reg_write(GPIO_DEV, 0xcb, 0x00);
ite_reg_write(GPIO_DEV, 0xf6, 0x26);
ite_reg_write(GPIO_DEV, 0xfc, 0x01);
ite_reg_write(EC_DEV, 0x70, 0x00); // Don't use IRQ9
ite_reg_write(EC_DEV, 0x30, 0xff); // Enable
}
static void ich7_enable_lpc(void)
{
// Enable Serial IRQ
pci_write_config8(PCI_DEV(0, 0x1f, 0), SERIRQ_CNTL, 0xd0);
// Set COM1/COM2 decode range
pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_IO_DEC, 0x0000);
// Enable COM1
pci_write_config16(PCI_DEV(0, 0x1f, 0), LPC_EN, CNF2_LPC_EN
| CNF1_LPC_EN | KBC_LPC_EN | FDD_LPC_EN | LPT_LPC_EN
| COMA_LPC_EN);
// Enable SuperIO Power Management Events
pci_write_config32(PCI_DEV(0, 0x1f, 0), GEN1_DEC, 0x000c0801);
/* LPC decode range 2: Environment Controller */
pci_write_config32(PCI_DEV(0, 0x1f, 0), GEN2_DEC, 0x00040291);
}
static void rcba_config(void)
{
/* Enable IOAPIC */
RCBA8(OIC) = 0x03;
/* Enable PCIe Root Port Clock Gate */
RCBA32(CG) = 0x00000001;
}
static void early_ich7_init(void)
{
uint8_t reg8;
uint32_t reg32;
// program secondary mlt XXX byte?
pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20);
// reset rtc power status
reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4);
reg8 &= ~(1 << 2);
pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8);
// usb transient disconnect
reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad);
reg8 |= (3 << 0);
pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8);
reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc);
reg32 |= (1 << 29) | (1 << 17);
pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32);
reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc);
reg32 |= (1 << 31) | (1 << 27);
pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32);
RCBA32(0x0088) = 0x0011d000;
RCBA16(0x01fc) = 0x060f;
RCBA32(0x01f4) = 0x86000040;
RCBA32(0x0214) = 0x10030509;
RCBA32(0x0218) = 0x00020504;
RCBA8(0x0220) = 0xc5;
reg32 = RCBA32(GCS);
reg32 |= (1 << 6);
RCBA32(GCS) = reg32;
reg32 = RCBA32(0x3430);
reg32 &= ~(3 << 0);
reg32 |= (1 << 0);
RCBA32(0x3430) = reg32;
RCBA16(0x0200) = 0x2008;
RCBA8(0x2027) = 0x0d;
RCBA16(0x3e08) |= (1 << 7);
RCBA16(0x3e48) |= (1 << 7);
RCBA32(0x3e0e) |= (1 << 7);
RCBA32(0x3e4e) |= (1 << 7);
// next step only on ich7m b0 and later:
reg32 = RCBA32(0x2034);
reg32 &= ~(0x0f << 16);
reg32 |= (5 << 16);
RCBA32(0x2034) = reg32;
}
void mainboard_romstage_entry(unsigned long bist)
{
int s3resume = 0, boot_mode = 0;
if (bist == 0)
enable_lapic();
ich7_enable_lpc();
/* Enable SuperIO PM */
setup_sio();
ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
/* Disable SIO reboot */
ite_reg_write(GPIO_DEV, 0xEF, 0x7E);
/* Set up the console */
console_init();
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
if (MCHBAR16(SSKPD) == 0xCAFE) {
printk(BIOS_DEBUG, "soft reset detected.\n");
boot_mode = 1;
}
/* Perform some early chipset initialization required
* before RAM initialization can work
*/
i945_early_initialization();
s3resume = southbridge_detect_s3_resume();
/* Enable SPD ROMs and DDR-II DRAM */
enable_smbus();
if (CONFIG(DEBUG_RAM_SETUP))
dump_spd_registers();
sdram_initialize(s3resume ? 2 : boot_mode, NULL);
/* Perform some initialization that must run before stage2 */
early_ich7_init();
/* This should probably go away. Until now it is required
* and mainboard specific
*/
rcba_config();
/* Chipset Errata! */
fixup_i945_errata();
/* Initialize the internal PCIe links before we go into stage2 */
i945_late_initialization(s3resume);
}
|