summaryrefslogtreecommitdiff
path: root/src/mainboard/google/hatch/variants/helios/memory.c
blob: 98b8ef61db1f5a7c1b42039581ad68d3a396616c (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
/* SPDX-License-Identifier: GPL-2.0-only */

#include <baseboard/variants.h>
#include <baseboard/gpio.h>
#include <boardid.h>
#include <gpio.h>
#include <soc/cnl_memcfg_init.h>
#include <string.h>
#include <variant/gpio.h>

static const struct cnl_mb_cfg baseboard_memcfg = {
	/*
	 * The dqs_map arrays map the SoC pins to the lpddr3 pins
	 * for both channels.
	 *
	 * "The index of the array is CPU byte number, the values are DRAM byte
	 * numbers." - doc #573387
	 *
	 * the index = pin number on SoC
	 * the value = pin number on lpddr3 part
	 */
	.dqs_map[DDR_CH0] = {4, 7, 5, 6, 0, 3, 2, 1},
	.dqs_map[DDR_CH1] = {0, 3, 2, 1, 4, 7, 6, 5},

	.dq_map[DDR_CH0] = {
		{0xf0, 0xf},
		{0x0, 0xf},
		{0xf0, 0xf},
		{0xf0, 0x0},
		{0xff, 0x0},
		{0xff, 0x0}
	},
	.dq_map[DDR_CH1] = {
		{0xf, 0xf0},
		{0x0, 0xf0},
		{0xf, 0xf0},
		{0xf, 0x0},
		{0xff, 0x0},
		{0xff, 0x0}
	},

	/* Helios uses 200, 80.6 and 162 rcomp resistors */
	.rcomp_resistor = {200, 81, 162},

	/* Helios Rcomp target values */
	.rcomp_targets = {100, 40, 40, 23, 40},

	/* Set CaVref config to 0 for LPDDR3 */
	.vref_ca_config = 0,

	/* Disable Early Command Training */
	.ect = 0,
};

void variant_memory_params(struct cnl_mb_cfg *bcfg)
{
	memcpy(bcfg, &baseboard_memcfg, sizeof(baseboard_memcfg));
}

int variant_memory_sku(void)
{
	const gpio_t spd_gpios[] = {
		GPIO_MEM_CONFIG_0,
		GPIO_MEM_CONFIG_1,
		GPIO_MEM_CONFIG_2,
		GPIO_MEM_CONFIG_3,
	};

	int val = gpio_base2_value(spd_gpios, ARRAY_SIZE(spd_gpios));

	if ((board_id() != 0) && (board_id() != BOARD_ID_UNKNOWN))
		return val;

	/*
	 * For boards with id 0 or unknown, memory straps 3 and 4 are
	 * incorrectly stuffed in hardware. This is a workaround for these
	 * boards to override memory strap 3 to 0 and 4 to 1.
	 */
	switch (val) {
	case 3:
		val = 0;
		break;
	case 4:
		val = 1;
		break;
	}

	return val;
}