1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2014 Imagination Technologies
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
#include <arch/io.h>
#include <stdint.h>
#include <soc/clocks.h>
#include <assert.h>
#define PADS_FUNCTION_SELECT0_ADDR (0xB8101C00 + 0xC0)
#define GPIO_BIT_EN_ADDR(bank) (0xB8101C00 + 0x200 + (0x24 * (bank)))
#define PAD_DRIVE_STRENGTH_ADDR(bank) (0xB8101C00 + 0x120 + (0x4 * (bank)))
#define MAX_NO_MFIOS 89
#define PAD_DRIVE_STRENGTH_LENGTH 2
#define PAD_DRIVE_STRENGTH_MASK 0x3
typedef enum {
DRIVE_STRENGTH_2mA = 0,
DRIVE_STRENGTH_4mA = 1,
DRIVE_STRENGTH_8mA = 2,
DRIVE_STRENGTH_12mA = 3
} drive_strength;
/* MFIO definitions for UART1 */
#define UART1_RXD_MFIO 59
#define UART1_TXD_MFIO 60
/* MFIO definitions for SPIM */
#define SPIM1_D0_TXD_MFIO 5
#define SPIM1_D1_RXD_MFIO 4
#define SPIM1_MCLK_MFIO 3
#define SPIM1_D2_MFIO 6
#define SPIM1_D3_MFIO 7
#define SPIM1_CS0_MFIO 0
/* MFIO definitions for I2C0 */
#define I2C0_DATA_MFIO 28
#define I2C0_CLK_MFIO 29
#define I2C0_DATA_FUNCTION_OFFSET 20
#define I2C0_CLK_FUNCTION_OFFSET 21
#define I2C0_DATA_FUNCTION_MASK 0x1
#define I2C0_CLK_FUNCTION_MASK 0x1
static void pad_drive_strength(u32 pad, drive_strength strength)
{
u32 reg, drive_strength_shift;
assert(pad <= MAX_NO_MFIOS);
assert(!(strength & ~(PAD_DRIVE_STRENGTH_MASK)));
/* Set drive strength value */
drive_strength_shift = (pad % 16) * PAD_DRIVE_STRENGTH_LENGTH;
reg = read32(PAD_DRIVE_STRENGTH_ADDR(pad / 16));
reg &= ~(PAD_DRIVE_STRENGTH_MASK << drive_strength_shift);
reg |= strength << drive_strength_shift;
write32(PAD_DRIVE_STRENGTH_ADDR(pad / 16), reg);
}
static void uart1_mfio_setup(void)
{
u32 reg, mfio_mask;
/*
* Disable GPIO for UART1 MFIOs
* All UART MFIOs have MFIO/16 = 3, therefore we use GPIO pad 3
* This is the only function (0) of these MFIOs and therfore there
* is no need to set up a function number in the corresponding
* function select register.
*/
reg = read32(GPIO_BIT_EN_ADDR(3));
mfio_mask = 1 << (UART1_RXD_MFIO % 16);
mfio_mask |= 1 << (UART1_TXD_MFIO % 16);
/* Clear relevant bits */
reg &= ~mfio_mask;
/*
* Set corresponding bits in the upper half word
* in order to be able to modify the chosen pins
*/
reg |= mfio_mask << 16;
write32(GPIO_BIT_EN_ADDR(3), reg);
}
static void spim1_mfio_setup(void)
{
u32 reg, mfio_mask;
/*
* Disable GPIO for SPIM1 MFIOs
* All SPFI1 MFIOs have MFIO/16 = 0, therefore we use GPIO pad 0
* This is the only function (0) of these MFIOs and therfore there
* is no need to set up a function number in the corresponding
* function select register.
*/
reg = read32(GPIO_BIT_EN_ADDR(0));
/* Disable GPIO for SPIM1 MFIOs */
mfio_mask = 1 << (SPIM1_D0_TXD_MFIO % 16);
mfio_mask |= 1 << (SPIM1_D1_RXD_MFIO % 16);
mfio_mask |= 1 << (SPIM1_MCLK_MFIO % 16);
mfio_mask |= 1 << (SPIM1_D2_MFIO % 16);
mfio_mask |= 1 << (SPIM1_D3_MFIO % 16);
mfio_mask |= 1 << (SPIM1_CS0_MFIO % 16);
/* Clear relevant bits */
reg &= ~mfio_mask;
/*
* Set corresponding bits in the upper half word
* in order to be able to modify the chosen pins
*/
reg |= mfio_mask << 16;
write32(GPIO_BIT_EN_ADDR(0), reg);
/* Set drive strength to maximum for these MFIOs */
pad_drive_strength(SPIM1_CS0_MFIO, DRIVE_STRENGTH_12mA);
pad_drive_strength(SPIM1_D1_RXD_MFIO, DRIVE_STRENGTH_12mA);
pad_drive_strength(SPIM1_D0_TXD_MFIO, DRIVE_STRENGTH_12mA);
pad_drive_strength(SPIM1_D2_MFIO, DRIVE_STRENGTH_12mA);
pad_drive_strength(SPIM1_D3_MFIO, DRIVE_STRENGTH_12mA);
pad_drive_strength(SPIM1_MCLK_MFIO, DRIVE_STRENGTH_12mA);
}
static void i2c0_mfio_setup(void)
{
u32 reg, mfio_mask;
/*
* Disable GPIO for I2C0 MFIOs
* All UART MFIOs have MFIO/16 = 1, therefore we use GPIO pad 1
*/
reg = read32(GPIO_BIT_EN_ADDR(1));
mfio_mask = 1 << (I2C0_DATA_MFIO % 16);
mfio_mask |= 1 << (I2C0_CLK_MFIO % 16);
/* Clear relevant bits */
reg &= ~mfio_mask;
/*
* Set corresponding bits in the upper half word
* in order to be able to modify the chosen pins
*/
reg |= mfio_mask << 16;
write32(GPIO_BIT_EN_ADDR(1), reg);
/* Set bits to 0 (clear) which is the primary function
* for these MFIOs; those bits will all be set to 1 by
* default
*/
reg = read32(PADS_FUNCTION_SELECT0_ADDR);
reg &= ~(I2C0_DATA_FUNCTION_MASK << I2C0_DATA_FUNCTION_OFFSET);
reg &= ~(I2C0_CLK_FUNCTION_MASK << I2C0_CLK_FUNCTION_OFFSET);
write32(PADS_FUNCTION_SELECT0_ADDR, reg);
}
static int init_clocks(void)
{
int ret;
/*
* Set up dividers for peripherals before setting up PLLs
* in order to not over-clock them when enabling PLLs
*/
/* System PLL divided by 2 -> 400 MHz */
/* The same frequency will be the input frequency for the SPFI block */
system_clk_setup(1);
/* MIPS CPU dividers: division by 1 -> 546 MHz
* This is set up as we cannot make any assumption about
* the values set or not by the boot ROM code */
mips_clk_setup(0, 0);
/* System clock divided by 8 -> 50 MHz */
ret = usb_clk_setup(7, 2, 7);
if (ret != CLOCKS_OK)
return ret;
/* System PLL divided by 7 divided by 62 -> 1.8433 Mhz */
uart1_clk_setup(6, 61);
/* System PLL divided by 4 divided by 3 -> 33.33 MHz */
i2c_clk_setup(3, 2, 0);
/* Ethernet clocks setup: ENET as clock source */
eth_clk_setup(0, 7);
/* ROM clock setup: system clock divided by 2 -> 200 MHz */
/* Hash accelerator is driven from the ROM clock */
rom_clk_setup(1);
/* Setup system PLL at 800 MHz */
ret = sys_pll_setup(2, 1);
if (ret != CLOCKS_OK)
return ret;
/* Setup MIPS PLL at 546 MHz */
ret = mips_pll_setup(2, 1, 1, 21);
if (ret != CLOCKS_OK)
return ret;
return CLOCKS_OK;
}
static void bootblock_mainboard_init(void)
{
if (!init_clocks()) {
/* Disable GPIO on the peripheral lines */
uart1_mfio_setup();
spim1_mfio_setup();
i2c0_mfio_setup();
}
}
|
