summaryrefslogtreecommitdiff
path: root/src/mainboard/jetway/nf81-t56n-lf/BiosCallOuts.c
blob: 6e0f1ad9691afd18db6b210bf239f280d8da787f (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
/* SPDX-License-Identifier: GPL-2.0-only */

#include <AGESA.h>
#include <northbridge/amd/agesa/BiosCallOuts.h>

#include <amdlib.h>
#include <amdblocks/acpimmio.h>
#include <vendorcode/amd/cimx/sb800/SB800.h>
#include <stdint.h>

static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *ConfigPtr);
static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr);

const BIOS_CALLOUT_STRUCT BiosCallouts[] =
{
	{AGESA_DO_RESET,			agesa_Reset },
	{AGESA_READ_SPD,			agesa_ReadSpd },
	{AGESA_READ_SPD_RECOVERY,		agesa_NoopUnsupported },
	{AGESA_RUNFUNC_ONAP,			agesa_RunFuncOnAp },
	{AGESA_GNB_PCIE_SLOT_RESET,		board_GnbPcieSlotReset },
	{AGESA_HOOKBEFORE_DRAM_INIT,		board_BeforeDramInit },
	{AGESA_HOOKBEFORE_DRAM_INIT_RECOVERY,	agesa_NoopSuccess },
	{AGESA_HOOKBEFORE_DQS_TRAINING,		agesa_NoopSuccess },
	{AGESA_HOOKBEFORE_EXIT_SELF_REF,	agesa_NoopSuccess },
};
const int BiosCalloutsLen = ARRAY_SIZE(BiosCallouts);

/* Call the host environment interface to provide a user hook opportunity. */
static AGESA_STATUS board_BeforeDramInit (UINT32 Func, UINTN Data, VOID *ConfigPtr)
{
	/* Unlike e.g. AMD Inagua, Persimmon is unable to vary the RAM voltage.
	 * Make sure the right speed settings are selected.
	 */
	((MEM_DATA_STRUCT*)ConfigPtr)->ParameterListPtr->DDR3Voltage = VOLT1_5;
	return AGESA_SUCCESS;
}

/* PCIE slot reset control */
static AGESA_STATUS board_GnbPcieSlotReset (UINT32 Func, UINTN Data, VOID *ConfigPtr)
{
	AGESA_STATUS Status;
	uint32_t		FcnData;
	PCIe_SLOT_RESET_INFO	*ResetInfo;

	uint32_t	GpioMmioAddr;
	uint32_t	AcpiMmioAddr;
	uint8_t	 Data8;
	uint16_t	Data16;

	FcnData = Data;
	ResetInfo = ConfigPtr;
	/* Get SB800 MMIO Base (AcpiMmioAddr) */
	Data8 = pm_io_read8(0x27);
	Data16 = Data8 << 8;
	Data8 = pm_io_read8(0x26);
	Data16 |= Data8;
	AcpiMmioAddr = (uint32_t)Data16 << 16;
	Status = AGESA_UNSUPPORTED;
	GpioMmioAddr = AcpiMmioAddr + GPIO_BASE;
	switch (ResetInfo->ResetId)
	{
	case 46:	/* GPIO50 = SBGPIO_PCIE_RST# affects LAN0, LAN1, PCIe slot */
		switch (ResetInfo->ResetControl) {
		case AssertSlotReset:
			Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50);
			Data8 &= ~(uint8_t)BIT6;
			Write64Mem8(GpioMmioAddr+SB_GPIO_REG50, Data8);
			Status = AGESA_SUCCESS;
			break;
		case DeassertSlotReset:
			Data8 = Read64Mem8(GpioMmioAddr+SB_GPIO_REG50);
			Data8 |= BIT6;
			Write64Mem8 (GpioMmioAddr+SB_GPIO_REG50, Data8);
			Status = AGESA_SUCCESS;
			break;
		}
		break;
	}
	return	Status;
}