1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007-2009 coresystems GmbH
* Copyright (C) 2011 Sven Schnelle <svens@stackframe.org>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; version 2 of
* the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
// __PRE_RAM__ means: use "unsigned" for device, not a struct.
#include <stdint.h>
#include <string.h>
#include <arch/io.h>
#include <device/pci_def.h>
#include <device/pnp_def.h>
#include <cpu/x86/lapic.h>
#include <lib.h>
#include <cbmem.h>
#include <timestamp.h>
#include <pc80/mc146818rtc.h>
#include <console/console.h>
#include <cpu/x86/bist.h>
#include "northbridge/intel/i945/i945.h"
#include "northbridge/intel/i945/raminit.h"
#include "southbridge/intel/i82801gx/i82801gx.h"
#include "dock.h"
void setup_ich7_gpios(void)
{
printk(BIOS_DEBUG, " GPIOS...");
/* T60 GPIO:
6: LEGACYIO#
7: BDC_PRESENCE#
8: H8_WAKE#
10: MDI_DETECT
12: H8SCI#
14: CPUSB#
15: CPPE#
25: MDC_KILL#
27: EXC_PWR_CTRL
28: EXC_AUX_CTRL
35: CLKREQ_SATA#
36: PLANARID0
37: PLANARID1
38: PLANARID2
39: PLANARID3
*/
outl(0x1f48f7c2, DEFAULT_GPIOBASE + 0x00); /* GPIO_USE_SEL */
outl(0xe0e0ffc3, DEFAULT_GPIOBASE + 0x04); /* GP_IO_SEL */
outl(0xfbfefb7d, DEFAULT_GPIOBASE + 0x0c); /* GP_LVL */
/* Output Control Registers */
outl(0x00040000, DEFAULT_GPIOBASE + 0x18); /* GPO_BLINK */
/* Input Control Registers */
outl(0x000039ff, DEFAULT_GPIOBASE + 0x2c); /* GPI_INV */
outl(0x000100f0, DEFAULT_GPIOBASE + 0x30); /* GPIO_USE_SEL2 */
outl(0x000000f1, DEFAULT_GPIOBASE + 0x34); /* GP_IO_SEL2 */
outl(0x000300a3, DEFAULT_GPIOBASE + 0x38); /* GP_LVL2 */
}
static void ich7_enable_lpc(void)
{
// Enable Serial IRQ
pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x64, 0xd0);
// decode range
pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x80, 0x0210);
// decode range
pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x82, 0x1f0d);
/* range 0x1600 - 0x167f */
pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x84, 0x1601);
pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x86, 0x007c);
/* range 0x15e0 - 0x10ef */
pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x88, 0x15e1);
pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8a, 0x000c);
/* range 0x1680 - 0x169f */
pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8c, 0x1681);
pci_write_config16(PCI_DEV(0, 0x1f, 0), 0x8e, 0x001c);
}
static void early_superio_config(void)
{
int timeout = 100000;
device_t dev = PNP_DEV(0x2e, 3);
pnp_write_config(dev, 0x29, 0xa0);
while(!(pnp_read_config(dev, 0x29) & 0x10) && timeout--)
udelay(1000);
/* Enable COM1 */
pnp_set_logical_device(dev);
pnp_set_iobase(dev, PNP_IDX_IO0, 0x3f8);
pnp_set_enable(dev, 1);
}
static void rcba_config(void)
{
/* Set up virtual channel 0 */
RCBA32(0x0014) = 0x80000001;
RCBA32(0x001c) = 0x03128010;
/* Device 1f interrupt pin register */
RCBA32(0x3100) = 0x00001230;
RCBA32(0x3108) = 0x40004321;
/* PCIe Interrupts */
RCBA32(0x310c) = 0x00004321;
/* HD Audio Interrupt */
RCBA32(0x3110) = 0x00000002;
/* dev irq route register */
RCBA16(0x3140) = 0x1007;
RCBA16(0x3142) = 0x0076;
RCBA16(0x3144) = 0x3210;
RCBA16(0x3146) = 0x7654;
RCBA16(0x3148) = 0x0010;
/* Enable IOAPIC */
RCBA8(0x31ff) = 0x03;
/* Enable upper 128bytes of CMOS */
RCBA32(0x3400) = (1 << 2);
/* Disable unused devices */
RCBA32(0x3418) = FD_PCIE6 | FD_PCIE5 | FD_INTLAN | FD_ACMOD | FD_ACAUD;
RCBA32(0x3418) |= (1 << 0); // Required.
/* Set up I/O Trap #0 for 0xfe00 (SMIC) */
RCBA32(0x1e84) = 0x00020001;
RCBA32(0x1e80) = 0x0000fe01;
/* Set up I/O Trap #3 for 0x800-0x80c (Trap) */
RCBA32(0x1e9c) = 0x000200f0;
RCBA32(0x1e98) = 0x000c0801;
}
static void early_ich7_init(void)
{
uint8_t reg8;
uint32_t reg32;
// program secondary mlt XXX byte?
pci_write_config8(PCI_DEV(0, 0x1e, 0), 0x1b, 0x20);
// reset rtc power status
reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xa4);
reg8 &= ~(1 << 2);
pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xa4, reg8);
// usb transient disconnect
reg8 = pci_read_config8(PCI_DEV(0, 0x1f, 0), 0xad);
reg8 |= (3 << 0);
pci_write_config8(PCI_DEV(0, 0x1f, 0), 0xad, reg8);
reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xfc);
reg32 |= (1 << 29) | (1 << 17);
pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xfc, reg32);
reg32 = pci_read_config32(PCI_DEV(0, 0x1d, 7), 0xdc);
reg32 |= (1 << 31) | (1 << 27);
pci_write_config32(PCI_DEV(0, 0x1d, 7), 0xdc, reg32);
RCBA32(0x0088) = 0x0011d000;
RCBA16(0x01fc) = 0x060f;
RCBA32(0x01f4) = 0x86000040;
RCBA32(0x0214) = 0x10030549;
RCBA32(0x0218) = 0x00020504;
RCBA8(0x0220) = 0xc5;
reg32 = RCBA32(0x3410);
reg32 |= (1 << 6);
RCBA32(0x3410) = reg32;
reg32 = RCBA32(0x3430);
reg32 &= ~(3 << 0);
reg32 |= (1 << 0);
RCBA32(0x3430) = reg32;
RCBA32(0x3418) |= (1 << 0);
RCBA16(0x0200) = 0x2008;
RCBA8(0x2027) = 0x0d;
RCBA16(0x3e08) |= (1 << 7);
RCBA16(0x3e48) |= (1 << 7);
RCBA32(0x3e0e) |= (1 << 7);
RCBA32(0x3e4e) |= (1 << 7);
// next step only on ich7m b0 and later:
reg32 = RCBA32(0x2034);
reg32 &= ~(0x0f << 16);
reg32 |= (5 << 16);
RCBA32(0x2034) = reg32;
}
void main(unsigned long bist)
{
u32 reg32;
int boot_mode = 0, dock_err;
int cbmem_was_initted;
const u8 spd_addrmap[2 * DIMM_SOCKETS] = { 0x50, 0x52, 0x51, 0x53 };
#if CONFIG_COLLECT_TIMESTAMPS
tsc_t start_romstage_time;
tsc_t before_dram_time;
tsc_t after_dram_time;
tsc_t base_time = {
.lo = pci_read_config32(PCI_DEV(0, 0x00, 0), 0xdc),
.hi = pci_read_config32(PCI_DEV(0, 0x1f, 2), 0xd0)
};
#endif
#if CONFIG_COLLECT_TIMESTAMPS
start_romstage_time = rdtsc();
#endif
if (bist == 0)
enable_lapic();
/* Force PCIRST# */
pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, SBR);
udelay(200 * 1000);
pci_write_config16(PCI_DEV(0, 0x1e, 0), BCTRL, 0);
ich7_enable_lpc();
/* We want early GPIO setup, to be able to detect legacy I/O module */
pci_write_config32(PCI_DEV(0, 0x1f, 0), GPIOBASE, DEFAULT_GPIOBASE | 1);
/* Enable GPIOs */
pci_write_config8(PCI_DEV(0, 0x1f, 0), 0x4c /* GC */ , 0x10);
setup_ich7_gpios();
dock_err = dlpc_init();
/* We prefer Legacy I/O module over docking */
if (legacy_io_present()) {
legacy_io_init();
early_superio_config();
} else if (!dock_err && dock_present()) {
dock_connect();
early_superio_config();
}
/* Setup the console */
console_init();
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
if (MCHBAR16(SSKPD) == 0xCAFE) {
printk(BIOS_DEBUG, "soft reset detected, rebooting properly\n");
outb(0x6, 0xcf9);
while (1) asm("hlt");
}
/* Perform some early chipset initialization required
* before RAM initialization can work
*/
i945_early_initialization();
/* Read PM1_CNT */
reg32 = inl(DEFAULT_PMBASE + 0x04);
printk(BIOS_DEBUG, "PM1_CNT: %08x\n", reg32);
if (((reg32 >> 10) & 7) == 5) {
#if CONFIG_HAVE_ACPI_RESUME
printk(BIOS_DEBUG, "Resume from S3 detected.\n");
boot_mode = 2;
/* Clear SLP_TYPE. This will break stage2 but
* we care for that when we get there.
*/
outl(reg32 & ~(7 << 10), DEFAULT_PMBASE + 0x04);
#else
printk(BIOS_DEBUG, "Resume from S3 detected, but disabled.\n");
#endif
}
/* Enable SPD ROMs and DDR-II DRAM */
enable_smbus();
#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8
dump_spd_registers();
#endif
#if CONFIG_COLLECT_TIMESTAMPS
before_dram_time = rdtsc();
#endif
sdram_initialize(boot_mode, spd_addrmap);
#if CONFIG_COLLECT_TIMESTAMPS
after_dram_time = rdtsc();
#endif
/* Perform some initialization that must run before stage2 */
early_ich7_init();
/* This should probably go away. Until now it is required
* and mainboard specific
*/
rcba_config();
/* Chipset Errata! */
fixup_i945_errata();
/* Initialize the internal PCIe links before we go into stage2 */
i945_late_initialization();
#if !CONFIG_HAVE_ACPI_RESUME
#if CONFIG_DEFAULT_CONSOLE_LOGLEVEL > 8
#if CONFIG_DEBUG_RAM_SETUP
sdram_dump_mchbar_registers();
{
/* This will not work if TSEG is in place! */
u32 tom = pci_read_config32(PCI_DEV(0,2,0), 0x5c);
printk(BIOS_DEBUG, "TOM: 0x%08x\n", tom);
ram_check(0x00000000, 0x000a0000);
ram_check(0x00100000, tom);
}
#endif
#endif
#endif
MCHBAR16(SSKPD) = 0xCAFE;
cbmem_was_initted = !cbmem_initialize();
#if CONFIG_HAVE_ACPI_RESUME
/* If there is no high memory area, we didn't boot before, so
* this is not a resume. In that case we just create the cbmem toc.
*/
if ((boot_mode == 2) && cbmem_was_initted) {
void *resume_backup_memory = cbmem_find(CBMEM_ID_RESUME);
/* copy 1MB - 64K to high tables ram_base to prevent memory corruption
* through stage 2. We could keep stuff like stack and heap in high tables
* memory completely, but that's a wonderful clean up task for another
* day.
*/
if (resume_backup_memory)
memcpy(resume_backup_memory, (void *)CONFIG_RAMBASE, HIGH_MEMORY_SAVE);
/* Magic for S3 resume */
pci_write_config32(PCI_DEV(0, 0x00, 0), SKPAD, SKPAD_ACPI_S3_MAGIC);
}
#endif
#if CONFIG_COLLECT_TIMESTAMPS
timestamp_init(base_time);
timestamp_add(TS_START_ROMSTAGE, start_romstage_time );
timestamp_add(TS_BEFORE_INITRAM, before_dram_time );
timestamp_add(TS_AFTER_INITRAM, after_dram_time );
timestamp_add_now(TS_END_ROMSTAGE);
#endif
#if CONFIG_CONSOLE_CBMEM
/* Keep this the last thing this function does. */
cbmemc_reinit();
#endif
}
|