1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
|
#define ASSEMBLY 1
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <arch/hlt.h>
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/x86/bist.h"
#include "cpu/x86/msr.h"
#include <cpu/amd/gx2def.h>
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
#include "southbridge/amd/cs5535/cs5535_early_smbus.c"
#include "southbridge/amd/cs5535/cs5535_early_setup.c"
#include "northbridge/amd/gx2/raminit.h"
/* this has to be done on a per-mainboard basis, esp. if you don't have smbus */
static void sdram_set_spd_registers(const struct mem_controller *ctrl)
{
msr_t msr;
/* 1. Initialize GLMC registers base on SPD values,
* Hard coded as XpressROM for now */
//print_debug("sdram_enable step 1\r\n");
msr = rdmsr(0x20000018);
msr.hi = 0x10076013;
msr.lo = 0x3400;
wrmsr(0x20000018, msr);
msr = rdmsr(0x20000019);
msr.hi = 0x18000008;
msr.lo = 0x696332a3;
wrmsr(0x20000019, msr);
}
#include "northbridge/amd/gx2/raminit.c"
#include "sdram/generic_sdram.c"
#define PLLMSRhi 0x00000226
#define PLLMSRlo 0x00000008
#define PLLMSRlo1 ((0xde << 16) | (1 << 26) | (1 << 24))
#define PLLMSRlo2 ((1<<14) |(1<<13) | (1<<0))
#include "northbridge/amd/gx2/pll_reset.c"
#include "cpu/amd/model_gx2/cpureginit.c"
#include "cpu/amd/model_gx2/syspreinit.c"
static void msr_init(void)
{
__builtin_wrmsr(0x1808, 0x10f3bf00, 0x22fffc02);
__builtin_wrmsr(0x10000020, 0xfff80, 0x20000000);
__builtin_wrmsr(0x10000021, 0x80fffe0, 0x20000000);
__builtin_wrmsr(0x10000026, 0x400fffc0, 0x2cfbc040);
__builtin_wrmsr(0x10000027, 0xfff00000, 0xff);
__builtin_wrmsr(0x10000028, 0x7bf00100, 0x2000000f);
__builtin_wrmsr(0x1000002c, 0xff030003, 0x20000000);
__builtin_wrmsr(0x10000080, 0x3, 0x0);
__builtin_wrmsr(0x40000020, 0xfff80, 0x20000000);
__builtin_wrmsr(0x40000021, 0x80fffe0, 0x20000000);
__builtin_wrmsr(0x40000023, 0x400fffc0, 0x20000040);
__builtin_wrmsr(0x40000024, 0xff4ffffc, 0x200000ef);
__builtin_wrmsr(0x40000029, 0x7bf00100, 0x2000000f);
__builtin_wrmsr(0x4000002d, 0xff030003, 0x20000000);
__builtin_wrmsr(0x50002001, 0x27, 0x0);
__builtin_wrmsr(0x4c002001, 0x1, 0x0);
}
static void main(unsigned long bist)
{
static const struct mem_controller memctrl [] = {
{.channel0 = {(0xa<<3)|0, (0xa<<3)|1}}
};
unsigned char temp;
SystemPreInit();
msr_init();
w83627hf_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
uart_init();
console_init();
cs5535_early_setup();
print_err("done cs5535 early\n");
pll_reset();
print_err("done pll_reset\n");
cpuRegInit();
print_err("done cpuRegInit\n");
sdram_initialize(1, memctrl);
print_err("Done sdram_initialize\n");
print_err("Disable watchdog\n");
outb( 0x87, 0x4E); //enter SuperIO configuration mode
outb( 0x87, 0x4E);
outb(0x20, 0x4e);
temp = inb(0x4f);
print_debug_hex8(temp);
if (temp != 0x52){
print_err("CAN NOT READ SUPERIO VID\n");
}
outb(0x29, 0x4e);
outb(0x7c, 0x4f);
outb( 0x07, 0x4E); //enable logical device 9
outb( 0x09, 0x4F);
outb(0x30, 0x4e);
outb(1, 0x4f);
outb( 0xF0, 0x4E); //set GP33 as outbut in configuration register F0h Bit4 = \u20180\u2019
outb( 0xC7, 0x4F);
outb( 0xF1, 0x4E); //clr GP33 (Bit4) value in cofiguration register F1h to \u20181\u2019 disables
temp = inb(0x4F); //watchdog function. Make sure to let the other Bits unchanged!
print_debug_hex8(temp);print_debug(":");
temp = temp & ~8;
outb( temp, 0x4F);
temp = inb(0x4F); //watchdog function. Make sure to let the other Bits unchanged!
print_debug_hex8(temp);print_debug("\n");
/* Check all of memory */
// ram_check(0, 16384);
ram_check(0x20000, 0x24000);
// ram_check(0x00000000, 640*1024);
}
|
