1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2007 Advanced Micro Devices, Inc.
* Copyright (C) 2008 LiPPERT Embedded Computers GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc.
*/
/* Based on romstage.c from AMD's DB800 and DBM690T mainboards. */
#include <stdlib.h>
#include <stdint.h>
#include <spd.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <console/console.h>
#include <cpu/x86/bist.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/lxdef.h>
#include <southbridge/amd/cs5536/cs5536.h>
#include "southbridge/amd/cs5536/early_smbus.c"
#include "southbridge/amd/cs5536/early_setup.c"
#include <superio/ite/common/ite.h>
#include <superio/ite/it8712f/it8712f.h>
#include <northbridge/amd/lx/raminit.h>
#define SERIAL_DEV PNP_DEV(0x2e, IT8712F_SP1)
#define GPIO_DEV PNP_DEV(0x2e, IT8712F_GPIO)
/* Bit0 enables Spread Spectrum, bit1 makes on-board SSD act as IDE slave. */
#if CONFIG_ONBOARD_IDE_SLAVE
#define SMC_CONFIG 0x03
#else
#define SMC_CONFIG 0x01
#endif
static const unsigned char spdbytes[] = { // 4x Promos V58C2512164SA-J5I
0xFF, 0xFF, // only values used by Geode-LX raminit.c are set
[SPD_MEMORY_TYPE] = SPD_MEMORY_TYPE_SDRAM_DDR, // (Fundamental) memory type
[SPD_NUM_ROWS] = 0x0D, // Number of row address bits [13]
[SPD_NUM_COLUMNS] = 0x0A, // Number of column address bits [10]
[SPD_NUM_DIMM_BANKS] = 1, // Number of module rows (banks)
0xFF, 0xFF, 0xFF,
[SPD_MIN_CYCLE_TIME_AT_CAS_MAX] = 0x50, // SDRAM cycle time (highest CAS latency), RAS access time (tRAC) [5.0 ns in BCD]
0xFF, 0xFF,
[SPD_REFRESH] = 0x82, // Refresh rate/type [Self Refresh, 7.8 us]
[SPD_PRIMARY_SDRAM_WIDTH] = 64, // SDRAM width (primary SDRAM) [64 bits]
0xFF, 0xFF, 0xFF,
[SPD_NUM_BANKS_PER_SDRAM] = 4, // SDRAM device attributes, number of banks on SDRAM device
[SPD_ACCEPTABLE_CAS_LATENCIES] = 0x1C, // SDRAM device attributes, CAS latency [3, 2.5, 2]
0xFF, 0xFF,
[SPD_MODULE_ATTRIBUTES] = 0x20, // SDRAM module attributes [differential clk]
[SPD_DEVICE_ATTRIBUTES_GENERAL] = 0x40, // SDRAM device attributes, general [Concurrent AP]
[SPD_SDRAM_CYCLE_TIME_2ND] = 0x60, // SDRAM cycle time (2nd highest CAS latency) [6.0 ns in BCD]
0xFF,
[SPD_SDRAM_CYCLE_TIME_3RD] = 0x75, // SDRAM cycle time (3rd highest CAS latency) [7.5 ns in BCD]
0xFF,
[SPD_tRP] = 60, // Min. row precharge time [15 ns in units of 0.25 ns]
[SPD_tRRD] = 40, // Min. row active to row active [10 ns in units of 0.25 ns]
[SPD_tRCD] = 60, // Min. RAS to CAS delay [15 ns in units of 0.25 ns]
[SPD_tRAS] = 40, // Min. RAS pulse width = active to precharge delay [40 ns]
[SPD_BANK_DENSITY] = 0x40, // Density of each row on module [256 MB]
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
[SPD_tRFC] = 70 // SDRAM Device Minimum Auto Refresh to Active/Auto Refresh [70 ns]
};
int spd_read_byte(unsigned int device, unsigned int address)
{
if (device != DIMM0)
return 0xFF; /* No DIMM1, don't even try. */
#if CONFIG_DEBUG_SMBUS
if (address >= sizeof(spdbytes) || spdbytes[address] == 0xFF) {
printk(BIOS_ERR, "ERROR: spd_read_byte(DIMM0, 0x%02x) "
"returns 0xff\n", address);
}
#endif
/* Fake SPD ROM value */
return (address < sizeof(spdbytes)) ? spdbytes[address] : 0xFF;
}
/* Send config data to System Management Controller via SMB. */
static int smc_send_config(unsigned char config_data)
{
if (smbus_check_stop_condition(SMBUS_IO_BASE))
return 1;
if (smbus_start_condition(SMBUS_IO_BASE))
return 2;
if (smbus_send_slave_address(SMBUS_IO_BASE, 0x50)) // SMC address
return 3;
if (smbus_send_command(SMBUS_IO_BASE, 0x28)) // set config data
return 4;
if (smbus_send_command(SMBUS_IO_BASE, 0x01)) // data length
return 5;
if (smbus_send_command(SMBUS_IO_BASE, config_data))
return 6;
smbus_stop_condition(SMBUS_IO_BASE);
return 0;
}
#include "northbridge/amd/lx/pll_reset.c"
#include "lib/generic_sdram.c"
#include "cpu/amd/geode_lx/cpureginit.c"
#include "cpu/amd/geode_lx/syspreinit.c"
#include "cpu/amd/geode_lx/msrinit.c"
static const u16 sio_init_table[] = { // hi=data, lo=index
0x072C, // VIN6 enabled, FAN4/5 disabled, VIN7,VIN3 internal
0x1423, // don't delay PoWeROK1/2
0x9072, // watchdog triggers PWROK, counts seconds
#if !CONFIG_USE_WATCHDOG_ON_BOOT
0x0073, 0x0074, // disarm watchdog by changing 56 s timeout to 0
#endif
0xBF25, 0x172A, 0xF326, // select GPIO function for most pins
0xFF27, 0xDF28, 0x2729, // (GP45=SUSB, GP23,22,16,15=SPI, GP13=PWROK1)
0x66B8, 0x0CB9, // enable pullups on SPI, RS485_EN
0x07C0, // enable Simple-I/O for GP12-10= RS485_EN2,1, LIVE_LED
0x07C8, // config GP12-10 as output
0x2DF5, // map Hw Monitor Thermal Output to GP55
0x08F8, // map GP LED Blinking 1 to GP10=LIVE_LED (deactivate Simple I/O to use)
};
/* Early mainboard specific GPIO setup. */
static void mb_gpio_init(void)
{
int i;
/* Init Super I/O WDT, GPIOs. Done early, WDT init may trigger reset! */
for (i = 0; i < ARRAY_SIZE(sio_init_table); i++) {
u16 reg = sio_init_table[i];
ite_reg_write(GPIO_DEV, (u8) reg, (reg >> 8));
}
}
#include <cpu/intel/romstage.h>
void main(unsigned long bist)
{
int err;
static const struct mem_controller memctrl[] = {
{.channel0 = {DIMM0, DIMM1}}
};
SystemPreInit();
msr_init();
cs5536_early_setup();
/*
* Note: Must do this AFTER the early_setup! It is counting on some
* early MSR setup for CS5536.
*/
ite_enable_serial(SERIAL_DEV, CONFIG_TTYS0_BASE);
mb_gpio_init();
console_init();
/* Halt if there was a built in self test failure */
report_bist_failure(bist);
pll_reset();
cpuRegInit(0, DIMM0, DIMM1, DRAM_TERMINATED);
/* bit1 = on-board IDE is slave, bit0 = Spread Spectrum */
if ((err = smc_send_config(SMC_CONFIG))) {
printk(BIOS_ERR, "ERROR %d sending config data to SMC\n", err);
}
sdram_initialize(1, memctrl);
/* Memory is setup. Return to cache_as_ram.inc and continue to boot. */
return;
}
|