1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
|
#define ASSEMBLY 1
#include <stdint.h>
#include <device/pci_def.h>
#include <arch/io.h>
#include <device/pnp_def.h>
#include <arch/romcc_io.h>
#include <arch/hlt.h>
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
#include "superio/winbond/w83627hf/w83627hf_early_serial.c"
#include "cpu/x86/bist.h"
#include "cpu/x86/msr.h"
#include <cpu/amd/gx2def.h>
#define SERIAL_DEV PNP_DEV(0x2e, W83627HF_SP1)
#include "southbridge/amd/cs5536/cs5536_early_smbus.c"
#include "southbridge/amd/cs5536/cs5536_early_setup.c"
static inline int spd_read_byte(unsigned device, unsigned address)
{
return smbus_read_byte(device, address);
}
#include "northbridge/amd/gx2/raminit.h"
static inline unsigned int fls(unsigned int x)
{
int r;
__asm__("bsfl %1,%0\n\t"
"jnz 1f\n\t"
"movl $32,%0\n"
"1:" : "=r" (r) : "g" (x));
return r;
}
/* sdram parameters for OLPC:
row address = 13
col address = 9
banks = 4
dimm0size=128MB
d0_MB=1 (module banks)
d0_cb=4 (component banks)
do_psz=4KB (page size)
Trc=10 (clocks) (ref2act)
Tras=7 (act2pre)
Trcd=3 (act2cmd)
Trp=3 (pre2act)
Trrd=2 (act2act)
Tref=17.8ms
*/
static void sdram_set_spd_registers(const struct mem_controller *ctrl)
{
/* Total size of DIMM = 2^row address (byte 3) * 2^col address (byte 4) *
* component Banks (byte 17) * module banks, side (byte 5) *
* width in bits (byte 6,7)
* = Density per side (byte 31) * number of sides (byte 5) */
/* 1. Initialize GLMC registers base on SPD values, do one DIMM for now */
msr_t msr;
unsigned char module_banks, val;
msr = rdmsr(MC_CF07_DATA);
/* get module banks (sides) per dimm, SPD byte 5 */
module_banks = 1;
module_banks >>= 1;
msr.hi &= ~(1 << CF07_UPPER_D0_MB_SHIFT);
msr.hi |= (module_banks << CF07_UPPER_D0_MB_SHIFT);
/* get component banks per module bank, SPD byte 17 */
val = 4;
val >>= 2;
msr.hi &= ~(0x1 << CF07_UPPER_D0_CB_SHIFT);
msr.hi |= (val << CF07_UPPER_D0_CB_SHIFT);
/* get the module bank density, SPD byte 31 */
/* this is multiples of 8 MB */
/* actually it is 2^x*4, where x is the value you put in */
/* for OLPC, set default size */
/* dimm size - hardcoded 128Mb */
val = 5;
msr.hi &= ~(0xf << CF07_UPPER_D0_SZ_SHIFT);
msr.hi |= (val << CF07_UPPER_D0_SZ_SHIFT);
/* page size = 2^col address */
val = 2; /* 4096 bytes */
msr.hi &= ~(0x7 << CF07_UPPER_D0_PSZ_SHIFT);
msr.hi |= (val << CF07_UPPER_D0_PSZ_SHIFT);
print_debug("computed msr.hi ");
print_debug_hex32(msr.hi);
print_debug("\r\n");
/* this is a standard value, DOES NOT PROBABLY MATCH FROM ABOVE */
/* well, it may be close. It's about 200,000 ticks */
msr.lo = 0x00003000;
wrmsr(MC_CF07_DATA, msr);
/* timing and mode ... */
msr = rdmsr(0x20000019);
/* per standard bios settings */
msr.hi = 0x18000108;
msr.lo =
(6<<28) | // cas_lat
(10<<24)| // ref2act
(7<<20)| // act2pre
(3<<16)| // pre2act
(3<<12)| // act2cmd
(2<<8)| // act2act
(2<<6)| // dplwr
(2<<4)| // dplrd
(3); // dal
/* the msr value reported by quanta is very, very different.
* we will go with that value for now.
*/
msr.lo = 0x286332a3;
wrmsr(0x20000019, msr);
}
#include "northbridge/amd/gx2/raminit.c"
#include "sdram/generic_sdram.c"
#define PLLMSRhi 0x00001490
#define PLLMSRlo 0x02000030
#define PLLMSRlo1 ((0xde << 16) | (1 << 26) | (1 << 24))
#define PLLMSRlo2 ((1<<14) |(1<<13) | (1<<0))
#include "northbridge/amd/gx2/pll_reset.c"
#include "cpu/amd/model_gx2/cpureginit.c"
#include "cpu/amd/model_gx2/syspreinit.c"
static void msr_init(void)
{
__builtin_wrmsr(0x1808, 0x10f3bf00, 0x22fffc02);
__builtin_wrmsr(0x10000020, 0xfff80, 0x20000000);
__builtin_wrmsr(0x10000021, 0x80fffe0, 0x20000000);
__builtin_wrmsr(0x40000020, 0xfff80, 0x20000000);
__builtin_wrmsr(0x40000021, 0x80fffe0, 0x20000000);
}
static void gpio_init(void)
{
unsigned long m;
/* Make sure events enable for gpio 12 is off */
m = inl(GPIOL_EVENTS_ENABLE);
m &= ~GPIOL_12_SET;
m |= GPIOL_12_CLEAR;
outl(m, GPIOL_EVENTS_ENABLE);
}
static void main(unsigned long bist)
{
static const struct mem_controller memctrl [] = {
{.channel0 = {(0xa<<3)|0, (0xa<<3)|1}}
};
SystemPreInit();
msr_init();
cs5536_early_setup();
/* NOTE: must do this AFTER the early_setup!
* it is counting on some early MSR setup
* for cs5536
*/
cs5536_setup_onchipuart();
gpio_init();
uart_init();
console_init();
pll_reset();
cpuRegInit();
print_err("done cpuRegInit\n");
sdram_initialize(1, memctrl);
/* Check all of memory */
//ram_check(0x00000000, 640*1024);
}
|
