summaryrefslogtreecommitdiff
path: root/src/mainboard/pcengines/apu1/mainboard.c
blob: a2a78c55ce8e5be202a58ecf7093b012f25bf6f8 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
/* SPDX-License-Identifier: GPL-2.0-only */

#include <amdblocks/acpimmio.h>
#include <AGESA.h>
#include <AMD.h>
#include <console/console.h>
#include <device/device.h>
#include <device/mmio.h>
#include <device/pci_ops.h>
#include <device/pci_def.h>
#include <southbridge/amd/common/amd_pci_util.h>
#include <smbios.h>
#include <string.h>
#include <southbridge/amd/cimx/sb800/SBPLATFORM.h>
#include <southbridge/amd/cimx/sb800/pci_devs.h>
#include <northbridge/amd/agesa/agesa_helper.h>
#include <northbridge/amd/agesa/family14/pci_devs.h>
#include <superio/nuvoton/nct5104d/nct5104d.h>
#include "gpio_ftns.h"

/***********************************************************
 * These arrays set up the FCH PCI_INTR registers 0xC00/0xC01.
 * This table is responsible for physically routing the PIC and
 * IOAPIC IRQs to the different PCI devices on the system.  It
 * is read and written via registers 0xC00/0xC01 as an
 * Index/Data pair.  These values are chipset and mainboard
 * dependent and should be updated accordingly.
 *
 * These values are used by the PCI configuration space,
 * MP Tables.  TODO: Make ACPI use these values too.
 *
 * The PCI INTA/B/C/D pins are connected to
 * FCH pins INTE/F/G/H on the schematic so these need
 * to be routed as well.
 */
static const u8 mainboard_picr_data[FCH_INT_TABLE_SIZE] = {
	/* INTA# - INTH# */
	[0x00] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,
	/* Misc-nil,0,1,2, INT from Serial irq */
	[0x08] = 0x00,0xF1,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
	/* SCI, SMBUS0, ASF, HDA, FC, GEC, PerfMon */
	[0x10] = 0x1F,0x1F,0x1F,0x0A,0x1F,0x1F,0x1F,
	/* IMC INT0 - 5 */
	[0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
	/* USB Devs 18/19/20/22 INTA-C */
	[0x30] = 0x0A,0x0B,0x0A,0x0B,0x0A,0x0B,0x0A,
	/* IDE, SATA */
	[0x40] = 0x0B,0x0B,
	/* GPPInt0 - 3 */
	[0x50] = 0x0A,0x0B,0x0A,0x0B
};

static const u8 mainboard_intr_data[FCH_INT_TABLE_SIZE] = {
	/* INTA# - INTH# */
	[0x00] = 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17,
	/* Misc-nil,0,1,2, INT from Serial irq */
	[0x08] = 0x00,0x00,0x00,0x00,0x1F,0x1F,0x1F,0x1F,
	/* SCI, SMBUS0, ASF, HDA, FC, GEC, PerMon */
	[0x10] = 0x09,0x1F,0x1F,0x10,0x1F,0x12,0x1F,
	/* IMC INT0 - 5 */
	[0x20] = 0x1F,0x1F,0x1F,0x1F,0x1F,0x1F,
	/* USB Devs 18/19/22/20 INTA-C */
	[0x30] = 0x12,0x11,0x12,0x11,0x12,0x11,0x12,
	/* IDE, SATA */
	[0x40] = 0x11,0x13,
	/* GPPInt0 - 3 */
	[0x50] = 0x10,0x11,0x12,0x13
};

/*
 * This table defines the index into the picr/intr_data
 * tables for each device.  Any enabled device and slot
 * that uses hardware interrupts should have an entry
 * in this table to define its index into the FCH
 * PCI_INTR register 0xC00/0xC01.  This index will define
 * the interrupt that it should use.  Putting PIRQ_A into
 * the PIN A index for a device will tell that device to
 * use PIC IRQ 10 if it uses PIN A for its hardware INT.
 */
/*
 * The PCI slot INTA/B/C/D connected to PIRQE/F/G/H
 * but because of PCI INT_PIN swizzle isn't implemented to match
 * the IDSEL (dev 3) of the slot, the table is adjusted for the
 * swizzle and INTA is connected to PIRQH so PINA/B/C/D on
 * off-chip devices should get mapped to PIRQH/E/F/G.
 */
static const struct pirq_struct mainboard_pirq_data[] = {
	/* {PCI_devfn,        {PIN A, PIN B, PIN C, PIN D}}, */
	{GFX_DEVFN,           {PIRQ_A, PIRQ_B, PIRQ_NC, PIRQ_NC}},      /* VGA:       01.0 */
	{NB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}},        /* NIC:       04.0 */
	{NB_PCIE_PORT2_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}},        /* NIC:       05.0 */
	{NB_PCIE_PORT3_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}},        /* NIC:       06.0 */
	{NB_PCIE_PORT4_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}},        /* miniPCIe:  07.0 */
	{SATA_DEVFN,          {PIRQ_SATA, PIRQ_NC, PIRQ_NC, PIRQ_NC}},  /* SATA:      11.0 */
	{OHCI1_DEVFN,         {PIRQ_OHCI1, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI1:     12.0 */
	{EHCI1_DEVFN,         {PIRQ_NC, PIRQ_EHCI1, PIRQ_NC, PIRQ_NC}}, /* EHCI1:     12.2 */
	{OHCI2_DEVFN,         {PIRQ_OHCI2, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI2:     13.0 */
	{EHCI2_DEVFN,         {PIRQ_NC, PIRQ_EHCI2, PIRQ_NC, PIRQ_NC}}, /* EHCI2:     13.2 */
	{SMBUS_DEVFN,         {PIRQ_SMBUS, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* SMBUS:     14.0 */
	{IDE_DEVFN,           {PIRQ_NC, PIRQ_IDE, PIRQ_NC, PIRQ_NC}},   /* IDE:       14.1 */
	{HDA_DEVFN,           {PIRQ_HDA, PIRQ_NC, PIRQ_NC, PIRQ_NC}},   /* HDA:       14.2 */
	{SB_PCI_PORT_DEVFN,   {PIRQ_H, PIRQ_E, PIRQ_F, PIRQ_G}},        /* PCI bdg:   14.4 */
	{OHCI4_DEVFN,         {PIRQ_NC, PIRQ_NC, PIRQ_OHCI4, PIRQ_NC}}, /* OHCI4:     14.5 */
	{SB_PCIE_PORT1_DEVFN, {PIRQ_A, PIRQ_B, PIRQ_C, PIRQ_D}},        /* miniPCIe:  15.0 */
	{OHCI3_DEVFN,         {PIRQ_OHCI3, PIRQ_NC, PIRQ_NC, PIRQ_NC}}, /* OHCI3:     16.0 */
	{EHCI3_DEVFN,         {PIRQ_NC, PIRQ_EHCI3, PIRQ_NC, PIRQ_NC}}, /* EHCI3:     16.2 */
};

/* PIRQ Setup */
static void pirq_setup(void)
{
	pirq_data_ptr = mainboard_pirq_data;
	pirq_data_size = sizeof(mainboard_pirq_data) / sizeof(struct pirq_struct);
	intr_data_ptr = mainboard_intr_data;
	picr_data_ptr = mainboard_picr_data;
}

/* Wrapper to enable GPIO/UART devices under menuconfig. Revisit
 * once configuration file format for SPI flash storage is complete.
 */
#define SIO_PORT 0x2e

static void config_gpio_mux(void)
{
	struct device *uart, *gpio;

	uart = dev_find_slot_pnp(SIO_PORT, NCT5104D_SP3);
	gpio = dev_find_slot_pnp(SIO_PORT, NCT5104D_GPIO0);
	if (uart)
		uart->enabled = CONFIG(APU1_PINMUX_UART_C);
	if (gpio)
		gpio->enabled = CONFIG(APU1_PINMUX_GPIO0);

	uart = dev_find_slot_pnp(SIO_PORT, NCT5104D_SP4);
	gpio = dev_find_slot_pnp(SIO_PORT, NCT5104D_GPIO1);
	if (uart)
		uart->enabled = CONFIG(APU1_PINMUX_UART_D);
	if (gpio)
		gpio->enabled = CONFIG(APU1_PINMUX_GPIO1);
}

static void pnp_raw_resource(struct device *dev, u8 reg, u8 val)
{
	struct resource *res;
	res = new_resource(dev, reg);
	res->base = val;
	res->size = 0;
	res->flags |= IORESOURCE_IRQ | IORESOURCE_ASSIGNED;
}

static void config_addon_uart(void)
{
	struct device *uart;

	uart = dev_find_slot_pnp(SIO_PORT, NCT5104D_SP3);
	if (uart && uart->enabled && CONFIG(UART_C_RS485))
		pnp_raw_resource(uart, 0xf2, 0x12);

	uart = dev_find_slot_pnp(SIO_PORT, NCT5104D_SP4);
	if (uart && uart->enabled && CONFIG(UART_D_RS485))
		pnp_raw_resource(uart, 0xf2, 0x12);
}

/**********************************************
 * Enable the dedicated functions of the board.
 **********************************************/
#if CONFIG(GENERATE_SMBIOS_TABLES)
static int mainboard_smbios_type16(DMI_INFO *agesa_dmi, int *handle, unsigned long *current)
{
	struct smbios_type16 *t;
	u32 max_capacity;
	int len;

	t = (struct smbios_type16 *)*current;
	len = sizeof(struct smbios_type16);
	memset(t, 0, len);
	max_capacity = get_spd_offset() ? 4 : 2; /* 4GB or 2GB variant */

	t->type = SMBIOS_PHYS_MEMORY_ARRAY;
	t->handle = *handle;
	t->length = len - 2;
	t->type = SMBIOS_PHYS_MEMORY_ARRAY;
	t->use = MEMORY_ARRAY_USE_SYSTEM;
	t->location = MEMORY_ARRAY_LOCATION_SYSTEM_BOARD;
	t->memory_error_correction = agesa_dmi->T16.MemoryErrorCorrection;
	t->maximum_capacity = max_capacity * 1024 * 1024;
	t->memory_error_information_handle = 0xfffe;
	t->number_of_memory_devices = 1;

	*current += len;

	return len;
}

static int mainboard_smbios_type17(DMI_INFO *agesa_dmi, int *handle, unsigned long *current)
{
	struct smbios_type17 *t;
	int len;

	t = (struct smbios_type17 *)*current;
	memset(t, 0, sizeof(struct smbios_type17));

	t->type = SMBIOS_MEMORY_DEVICE;
	t->length = sizeof(struct smbios_type17) - 2;
	t->handle = *handle + 1;
	t->phys_memory_array_handle = *handle;
	t->memory_error_information_handle = 0xfffe;
	t->total_width = agesa_dmi->T17[0][0][0].TotalWidth;
	t->data_width = agesa_dmi->T17[0][0][0].DataWidth;
	t->size = agesa_dmi->T17[0][0][0].MemorySize;
	/* AGESA DMI returns form factor = 0, override it with SPD value */
	t->form_factor = MEMORY_FORMFACTOR_SODIMM;
	t->device_set = agesa_dmi->T17[0][0][0].DeviceSet;
	t->device_locator = smbios_add_string(t->eos, agesa_dmi->T17[0][0][0].DeviceLocator);
	t->bank_locator = smbios_add_string(t->eos, agesa_dmi->T17[0][0][0].BankLocator);
	t->memory_type = agesa_dmi->T17[0][0][0].MemoryType;
	t->type_detail = *(u16 *)&agesa_dmi->T17[0][0][0].TypeDetail;
	t->speed = agesa_dmi->T17[0][0][0].Speed;
	t->manufacturer = agesa_dmi->T17[0][0][0].ManufacturerIdCode;
	t->serial_number = smbios_add_string(t->eos, agesa_dmi->T17[0][0][0].SerialNumber);
	t->part_number = smbios_add_string(t->eos, agesa_dmi->T17[0][0][0].PartNumber);
	t->attributes = agesa_dmi->T17[0][0][0].Attributes;
	t->extended_size = agesa_dmi->T17[0][0][0].ExtSize;
	t->clock_speed = agesa_dmi->T17[0][0][0].ConfigSpeed;
	t->minimum_voltage = 1500; /* From SPD: 1.5V */
	t->maximum_voltage = 1500;

	len = t->length + smbios_string_table_len(t->eos);
	*current += len;

	return len;
}

static int mainboard_smbios_data(struct device *dev, int *handle,
				 unsigned long *current)
{
	DMI_INFO *agesa_dmi;
	int len;

	agesa_dmi = agesawrapper_getlateinitptr(PICK_DMI);

	if (!agesa_dmi)
		return 0;

	len = mainboard_smbios_type16(agesa_dmi, handle, current);
	len += mainboard_smbios_type17(agesa_dmi, handle, current);

	*handle += 2;

	return len;
}
#endif

static void mainboard_enable(struct device *dev)
{
	printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Enable.\n");

	config_gpio_mux();
	config_addon_uart();

	/* Power off unused clock pins of GPP PCIe devices
	 * GPP CLK0-2 are connected to the 3 ethernet chips
	 * GPP CLK3-4 are connected to the miniPCIe slots
	 */
	misc_write8(0, 0x21);
	misc_write8(1, 0x43);
	/* GPP CLK5 is only connected to test pads -> disable */
	misc_write8(2, 0x05);
	/* disable unconnected GPP CLK6-8 and SLT_GFX_CLK */
	misc_write8(3, 0);
	misc_write8(4, 0);

	/* Initialize the PIRQ data structures for consumption */
	pirq_setup();
#if CONFIG(GENERATE_SMBIOS_TABLES)
	dev->ops->get_smbios_data = mainboard_smbios_data;
#endif
}

/*
 * We will stuff a modified version of the first NICs (BDF 1:0.0) MAC address
 * into the smbios serial number location.
 */
const char *smbios_mainboard_serial_number(void)
{
	static char serial[10];
	struct device *dev;
	uintptr_t bar18;
	u32 mac_addr = 0;
	int i;

	/* Already initialized. */
	if (serial[0] != 0)
		return serial;

	dev = pcidev_on_root(4, 0);
	if (dev)
		dev = pcidev_path_behind(dev->link_list, PCI_DEVFN(0, 0));
	if (!dev)
		return serial;

	/* Read in the last 3 bytes of NIC's MAC address. */
	bar18 = pci_read_config32(dev, 0x18);
	bar18 &= 0xFFFFFC00;
	for (i = 3; i < 6; i++) {
		mac_addr <<= 8;
		mac_addr |= read8((u8 *)bar18 + i);
	}
	mac_addr &= 0x00FFFFFF;
	mac_addr /= 4;
	mac_addr -= 64;

	snprintf(serial, sizeof(serial), "%d", mac_addr);
	return serial;
}

/*
 * Set up "Over Current Control 1" (reg 0x58) on the first OHCI device.
 * The remaining ports on the second device are for mcpie2/sdcard and
 * can stay at the power-on default value.
 *
 * The schematic shows this transposed mapping for the first device:
 * chipset port 0 -> port 1 (j12 external 2, usboc0#)
 * chipset port 1 -> port 4 (j17 mpcie1)
 * chipset port 2 -> port 2 (j14 header row1, usboc1#)
 * chipset port 3 -> port 3 (j14 header row2, usboc1#)
 * chipset port 4 -> port 0 (j12 external 1. usboc0#)
 *
 * Register mapping:
 * bit0-3: Mapping for HS Port 0
 * bit4-7: Mapping for HS Port 1
 * bit8-11: Mapping for HS Port 2
 * bit12-15: Mapping for HS Port 3
 * bit16-19: Mapping for HS Port 4
 * bit20-31: Reserved (0)
 *
 * power-on default: 0xfffff
 * A value >7 will disable the overcurrent detection.
 */
static void usb_oc_setup(void)
{
	struct device *dev = pcidev_on_root(0x12, 0);

	pci_write_config32(dev, 0x58, 0x011f0);
}

/*
 * We will stuff the memory size into the smbios sku location.
 */
const char *smbios_system_sku(void)
{
	static char sku[5];
	if (sku[0] != 0)
		return sku;

	if (!get_spd_offset())
		snprintf(sku, sizeof(sku), "2 GB");
	else
		snprintf(sku, sizeof(sku), "4 GB");
	return sku;
}

static void mainboard_final(void *chip_info)
{
	printk(BIOS_INFO, "Mainboard " CONFIG_MAINBOARD_PART_NUMBER " Final.\n");

	/*
	 * LED1/D7/GPIO_189 should be 0
	 * LED2/D6/GPIO_190 should be 1
	 * LED3/D5/GPIO_191 should be 1
	 */
	configure_gpio(GPIO_189, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_LOW);
	configure_gpio(GPIO_190, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_HIGH);
	configure_gpio(GPIO_191, GPIO_FTN_1, GPIO_OUTPUT | GPIO_DATA_HIGH);
	usb_oc_setup();
}

struct chip_operations mainboard_ops = {
	.enable_dev = mainboard_enable,
	.final = mainboard_final,
};