summaryrefslogtreecommitdiff
path: root/src/mainboard/siemens/sitemp_g1p1/mainboard.c
blob: 41811e4e87405f070e0afb59643a943a0c0c3108 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2008 Advanced Micro Devices, Inc.
 * Copyright (C) 2010 Siemens AG, Inc.
 * (Written by Josef Kellermann <joseph.kellermann@heitec.de> for Siemens AG, Inc.)
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <arch/io.h>
#include <arch/interrupt.h>
#include <delay.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/mtrr.h>
#include <device/pci_def.h>
#include <pc80/mc146818rtc.h>
#include <cpu/x86/lapic.h>
#include <southbridge/amd/sb600/sb600.h>
#include <southbridge/amd/rs690/chip.h>
#include <southbridge/amd/rs690/rs690.h>
#include <superio/ite/it8712f/it8712f.h>
#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
#include <x86emu/x86emu.h>
#endif
#include "int15_func.h"
#include "mainboard.h"

// ****LCD panel ID support: *****
// Callback Sub-Function 00h - Get LCD Panel ID
#define PANEL_TABLE_ID_NO 	0 // no LCD
#define PANEL_TABLE_ID1 	1 // 1024x768_65MHz_Dual
#define PANEL_TABLE_ID2 	2 // 920x1200_162MHz
#define PANEL_TABLE_ID3 	3 // 600x1200_162MHz
#define PANEL_TABLE_ID4 	4 // 1024x768_65MHz
#define PANEL_TABLE_ID5 	5 // 1400x1050_108MHz
#define PANEL_TABLE_ID6 	6 // 1680x1050_119MHz
#define PANEL_TABLE_ID7 	7 // 2048x1536_164MHz
#define PANEL_TABLE_ID8 	8 // 1280x1024_108MHz
#define PANEL_TABLE_ID9 	9 // 1366x768_86MHz_chimei_V32B1L01

// Callback Sub-Function 05h - Select Boot-up TV Standard
#define TV_MODE_00	0x00	/* NTSC */
#define TV_MODE_01	0x01	/* PAL */
#define TV_MODE_02	0x02	/* PALM */
#define TV_MODE_03	0x03	/* PAL60 */
#define TV_MODE_04	0x04	/* NTSCJ */
#define TV_MODE_05	0x05	/* PALCN */
#define TV_MODE_06	0x06	/* PALN */
#define TV_MODE_09	0x09	/* SCART-RGB */
#define TV_MODE_NO	0xff	/* No TV Support */

#define PLX_VIDDID 0x861610b5

/* 7475 Common Registers */
#define REG_DEVREV2             0x12    /* ADT7490 only */
#define REG_VTT                 0x1E    /* ADT7490 only */
#define REG_EXTEND3             0x1F    /* ADT7490 only */
#define REG_VOLTAGE_BASE        0x20
#define REG_TEMP_BASE           0x25
#define REG_TACH_BASE           0x28
#define REG_PWM_BASE            0x30
#define REG_PWM_MAX_BASE        0x38
#define REG_DEVID               0x3D
#define REG_VENDID              0x3E
#define REG_DEVID2              0x3F
#define REG_STATUS1             0x41
#define REG_STATUS2             0x42
#define REG_VID                 0x43    /* ADT7476 only */
#define REG_VOLTAGE_MIN_BASE    0x44
#define REG_VOLTAGE_MAX_BASE    0x45
#define REG_TEMP_MIN_BASE       0x4E
#define REG_TEMP_MAX_BASE       0x4F
#define REG_TACH_MIN_BASE       0x54
#define REG_PWM_CONFIG_BASE     0x5C
#define REG_TEMP_TRANGE_BASE    0x5F
#define REG_PWM_MIN_BASE        0x64
#define REG_TEMP_TMIN_BASE      0x67
#define REG_TEMP_THERM_BASE     0x6A
#define REG_REMOTE1_HYSTERSIS   0x6D
#define REG_REMOTE2_HYSTERSIS   0x6E
#define REG_TEMP_OFFSET_BASE    0x70
#define REG_CONFIG2             0x73
#define REG_EXTEND1             0x76
#define REG_EXTEND2             0x77
#define REG_CONFIG1				0x40	// ADT7475
#define REG_CONFIG3             0x78
#define REG_CONFIG5             0x7C
#define REG_CONFIG6				0x10	// ADT7475
#define REG_CONFIG7				0x11	// ADT7475
#define REG_CONFIG4             0x7D
#define REG_STATUS4             0x81    /* ADT7490 only */
#define REG_VTT_MIN             0x84    /* ADT7490 only */
#define REG_VTT_MAX             0x86    /* ADT7490 only */

#define VID_VIDSEL              0x80    /* ADT7476 only */

#define CONFIG2_ATTN            0x20
#define CONFIG3_SMBALERT        0x01
#define CONFIG3_THERM           0x02
#define CONFIG4_PINFUNC         0x03
#define CONFIG4_MAXDUTY         0x08
#define CONFIG4_ATTN_IN10       0x30
#define CONFIG4_ATTN_IN43       0xC0
#define CONFIG5_TWOSCOMP        0x01
#define CONFIG5_TEMPOFFSET      0x02
#define CONFIG5_VIDGPIO         0x10    /* ADT7476 only */
#define REMOTE1					0
#define LOCAL					1
#define REMOTE2					2

/* ADT7475 Settings */
#define ADT7475_VOLTAGE_COUNT   5       /* Not counting Vtt */
#define ADT7475_TEMP_COUNT      3
#define ADT7475_TACH_COUNT      4
#define ADT7475_PWM_COUNT       3

/* Macros to easily index the registers */
#define TACH_REG(idx) (REG_TACH_BASE + ((idx) * 2))
#define TACH_MIN_REG(idx) (REG_TACH_MIN_BASE + ((idx) * 2))

#define PWM_REG(idx) (REG_PWM_BASE + (idx))
#define PWM_MAX_REG(idx) (REG_PWM_MAX_BASE + (idx))
#define PWM_MIN_REG(idx) (REG_PWM_MIN_BASE + (idx))
#define PWM_CONFIG_REG(idx) (REG_PWM_CONFIG_BASE + (idx))

#define VOLTAGE_REG(idx) (REG_VOLTAGE_BASE + (idx))
#define VOLTAGE_MIN_REG(idx) (REG_VOLTAGE_MIN_BASE + ((idx) * 2))
#define VOLTAGE_MAX_REG(idx) (REG_VOLTAGE_MAX_BASE + ((idx) * 2))

#define TEMP_REG(idx) (REG_TEMP_BASE + (idx))
#define TEMP_MIN_REG(idx) (REG_TEMP_MIN_BASE + ((idx) * 2))
#define TEMP_MAX_REG(idx) (REG_TEMP_MAX_BASE + ((idx) * 2))
#define TEMP_TMIN_REG(idx) (REG_TEMP_TMIN_BASE + (idx))
#define TEMP_THERM_REG(idx) (REG_TEMP_THERM_BASE + (idx))
#define TEMP_OFFSET_REG(idx) (REG_TEMP_OFFSET_BASE + (idx))
#define TEMP_TRANGE_REG(idx) (REG_TEMP_TRANGE_BASE + (idx))

#define SMBUS_IO_BASE 0x1000
#define ADT7475_ADDRESS 0x2E

#define D_OPEN	(1 << 6)
#define D_CLS		(1 << 5)
#define D_LCK		(1 << 4)
#define G_SMRAME	(1 << 3)
#define A_BASE_SEG	((0 << 2) | (1 << 1) | (0 << 0)) // 0x2: SMM space at 640KB-768KB

extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address);
extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address, u8 val);

static u32 smbus_io_base = SMBUS_IO_BASE;
static u32 adt7475_address = ADT7475_ADDRESS;

/* Macro to read the registers */
#define adt7475_read_byte(reg) \
	do_smbus_read_byte(smbus_io_base, adt7475_address, reg)

#define adt7475_write_byte(reg, val) \
	do_smbus_write_byte(smbus_io_base, adt7475_address, reg, val)

#define TWOS_COMPL 1

struct __table__{
	const char *info;
	u8 val;
};

struct __table__ dutycycles[] = {
	{"25%", 0x3f},{"30%", 0x4c},{"35%", 0x59},{"40%", 0x66},{"45%", 0x73},
	{"50%", 0x80},{"55%", 0x8d},{"60%", 0x9a},{"65%", 0xa7},{"70%", 0xb4},
	{"75%", 0xc1},{"80%", 0xce},{"85%", 0xdb},{"90%", 0xe8},{"95%", 0xf5},
	{"100%", 0xff}
};
#define SIZEOF_DUTYCYCLES sizeof(dutycycles)/sizeof(struct __table__)
#define DUTYCYCLE(i,d) (i < SIZEOF_DUTYCYCLES) ? dutycycles[i].val : dutycycles[d].val // hopefully d is a correct value !!! fix
#define DUTYCYCLE_INFO(i) (i < SIZEOF_DUTYCYCLES) ? dutycycles[i].info : "out_of_range"
#if TWOS_COMPL == 0
struct __table__ temperatures[] = {
	{"30C", 0x5e},{"35C", 0x63},{"40C", 0x68},{"45C", 0x6d},{"50C", 0x72},
	{"55C", 0x77},{"60C", 0x7c},{"65C", 0x81},{"70C", 0x86},{"75C", 0x8b},
	{"80C", 0x90}
};
#else
struct __table__ temperatures[] = {
	{"30C", 30},{"35C", 35},{"40C", 40},{"45C", 45},{"50C", 50},
	{"55C", 55},{"60C", 60},{"65C", 65},{"70C", 70},{"75C", 75},
	{"80C", 80}
};
#endif
// FIXME: implicit conversion from 'double' to 'int'
// int trange[] = {2.0,2.5,3.33,4.0,5.0,6.67,8.0,10.0,13.33,16.0,20.0,26.67,32.0,40.0,53.33,80.0};
int trange[] = {2,2,3,4,5,6,8,10,13,16,20,26,32,40,53,80};

#define SIZEOF_TEMPERATURES sizeof(temperatures)/sizeof(struct __table__)
#define TEMPERATURE(i,d) (i < SIZEOF_TEMPERATURES) ? temperatures[i].val : temperatures[d].val // hopefully d is a correct value !!! fix
#define TEMPERATURE_INFO(i) (i < SIZEOF_TEMPERATURES) ? temperatures[i].info : "out of range"

struct fan_control {
		unsigned int enable : 1;
		u8 polarity;
		u8 t_min;
		u8 t_max;
		u8 pwm_min;
		u8 pwm_max;
		u8 t_range;
};
/* ############################################################################################# */
#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
static int int15_handler(void)
{
#define BOOT_DISPLAY_DEFAULT	0
#define BOOT_DISPLAY_CRT	(1 << 0)
#define BOOT_DISPLAY_TV		(1 << 1)
#define BOOT_DISPLAY_EFP	(1 << 2)
#define BOOT_DISPLAY_LCD	(1 << 3)
#define BOOT_DISPLAY_CRT2	(1 << 4)
#define BOOT_DISPLAY_TV2	(1 << 5)
#define BOOT_DISPLAY_EFP2	(1 << 6)
#define BOOT_DISPLAY_LCD2	(1 << 7)

	printk(BIOS_DEBUG, "%s: AX=%04x BX=%04x CX=%04x DX=%04x\n",
			  __func__, X86_AX, X86_BX, X86_CX, X86_DX);

	switch (X86_AX) {
	case 0x4e08: /* Boot Display */
	    switch (X86_BX) {
		case 0x80:
			X86_AX &= ~(0xff); // Success
			X86_BX &= ~(0xff);
			printk(BIOS_DEBUG, "Integrated System Information\n");
			break;
		case 0x00:
			X86_AX &= ~(0xff);
			X86_BX = 0x00;
			printk(BIOS_DEBUG, "Panel ID = 0\n");
			break;
		case 0x05:
			X86_AX &= ~(0xff);
			X86_BX = 0xff;
			printk(BIOS_DEBUG, "TV = off\n");
			break;
		default:
			return 0;
		}
		break;
	case 0x5f35: /* Boot Display */
		X86_AX = 0x005f; // Success
		X86_CL = BOOT_DISPLAY_DEFAULT;
		break;
	case 0x5f40: /* Boot Panel Type */
		// M.x86.R_AX = 0x015f; // Supported but failed
		X86_AX = 0x005f; // Success
		X86_CL = 3; // Display ID
		break;
	default:
		/* Interrupt was not handled */
		return 0;
	}

	/* Interrupt handled */
	return 1;
}
#endif
/* ############################################################################################# */

static u8 calc_trange(u8 t_min, u8 t_max) {

	u8 prev;
	int i;
	int diff = t_max - t_min;

	// walk through the trange table
	for(i = 0, prev = 0; i < sizeof(trange)/sizeof(int); i++) {
		if( trange[i] < diff ) {
			prev = i; // save last val
			continue;
		}
		if( diff == trange[i] ) return i;
		if( (diff - trange[prev]) < (trange[i] - diff) ) break; // return with last val index
		return i;
	}
	return prev;
}

/********************************************************
* sina uses SB600 GPIO9 to detect IDE_DMA66.
* IDE_DMA66 is routed to GPIO 9. So we read Gpio 9 to
* get the cable type, 40 pin or 80 pin?
********************************************************/
static void cable_detect(void)
{

	u8 byte;
	struct device *sm_dev;
	struct device *ide_dev;

	/* SMBus Module and ACPI Block (Device 20, Function 0) on SB600 */
	printk(BIOS_DEBUG, "%s.\n", __func__);
	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));

	byte = pci_read_config8(sm_dev, 0xA9);
	byte |= (1 << 5);	/* Set Gpio9 as input */
	pci_write_config8(sm_dev, 0xA9, byte);

	/* IDE Controller (Device 20, Function 1) on SB600 */
	ide_dev = dev_find_slot(0, PCI_DEVFN(0x14, 1));

	byte = pci_read_config8(ide_dev, 9);
	printk(BIOS_INFO, "IDE controller in %s Mode\n", byte & (1 << 0) ? "Native" : "Compatibility");

	byte = pci_read_config8(ide_dev, 0x56);
	byte &= ~(7 << 0);
	if( pci_read_config8(sm_dev, 0xAA) & (1 << 5) )
		byte |= 2 << 0;	/* mode 2 */
	else
		byte |= 5 << 0;	/* mode 5 */
	printk(BIOS_INFO, "DMA mode %d selected\n", byte & (7 << 0));
	pci_write_config8(ide_dev, 0x56, byte);
}

/**
 * @brief Detect the ADT7475 device
 *
 */

static const char * adt7475_detect( void ) {

        int vendid, devid, devid2;
        const char *name = NULL;

        vendid = adt7475_read_byte(REG_VENDID);
        devid2 = adt7475_read_byte(REG_DEVID2);
        if (vendid != 0x41 ||           /* Analog Devices */
            (devid2 & 0xf8) != 0x68) {
                return name;
		}

        devid = adt7475_read_byte(REG_DEVID);
        if (devid == 0x73)
                name = "adt7473";
        else if (devid == 0x75 && adt7475_address == 0x2e)
                name = "adt7475";
        else if (devid == 0x76)
                name = "adt7476";
        else if ((devid2 & 0xfc) == 0x6c)
                name = "adt7490";

        return name;
}

// thermal control defaults
const struct fan_control cpu_fan_control_defaults = {
	.enable = 0, // disable by default
	.polarity = 0, // high by default
	.t_min = 3, // default = 45°C
	.t_max = 7, // 65°C
	.pwm_min = 1, // default dutycycle = 30%
	.pwm_max = 13, // 90%
};
const struct fan_control case_fan_control_defaults = {
	.enable = 0, // disable by default
	.polarity = 0, // high by default
	.t_min = 2, // default = 40°C
	.t_max = 8, // 70°C
	.pwm_min = 0, // default dutycycle = 25%
	.pwm_max = 13, // 90%
};

static void pm_init( void )
{
	u16 word;
	u8 byte;
	device_t sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));

	/* set SB600 GPIO 64 to GPIO with pull-up */
	byte = pm2_ioread(0x42);
	byte &= 0x3f;
	pm2_iowrite(0x42, byte);

	/* set GPIO 64 to tristate */
	word = pci_read_config16(sm_dev, 0x56);
	word |= 1 << 7;
	pci_write_config16(sm_dev, 0x56, word);

	/* set GPIO 64 internal pull-up */
	byte = pm2_ioread(0xf0);
	byte &= 0xee;
	pm2_iowrite(0xf0, byte);

	/* set Talert to be active low */
	byte = pm_ioread(0x67);
	byte &= ~(1 << 5);
	pm_iowrite(0x67, byte);

	/* set Talert to generate ACPI event */
	byte = pm_ioread(0x3c);
	byte &= 0xf3;
	pm_iowrite(0x3c, byte);

	/* set GPM5 to not wake from s5 */
	byte = pm_ioread(0x77);
	byte &= ~(1 << 5);
	pm_iowrite(0x77, byte);
}

 /**
 * @brief Setup thermal config on SINA Mainboard
 *
 */

static void set_thermal_config(void)
{
	u8 byte, byte2;
	u8 cpu_pwm_conf, case_pwm_conf;
	device_t sm_dev;
	struct fan_control cpu_fan_control, case_fan_control;
	const char *name = NULL;


	sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
	smbus_io_base = pci_read_config32(sm_dev, 0x10) & ~(0xf); // get BAR0-Address which holds the SMBUS_IO_BASE

	if( (name = adt7475_detect()) == NULL ) {
		printk(BIOS_NOTICE, "Couldn't detect an ADT7473/75/76/90 part at %x:%x\n", smbus_io_base, adt7475_address);
		return;
	}
	printk(BIOS_DEBUG, "Found %s part at %x:%x\n", name, smbus_io_base, adt7475_address);

	cpu_fan_control = cpu_fan_control_defaults;
	case_fan_control = case_fan_control_defaults;

	if (get_option(&byte, "cpu_fan_control") == CB_CMOS_CHECKSUM_INVALID) {
		printk(BIOS_WARNING, "%s: CMOS checksum invalid, keeping default values\n",__func__);
	} else {
		// get all the options needed
		if( get_option(&byte, "cpu_fan_control") == CB_SUCCESS )
			cpu_fan_control.enable = byte ? 1 : 0;

		get_option(&cpu_fan_control.polarity, "cpu_fan_polarity");
		get_option(&cpu_fan_control.t_min, "cpu_t_min");
		get_option(&cpu_fan_control.t_max, "cpu_t_max");
		get_option(&cpu_fan_control.pwm_min, "cpu_dutycycle_min");
		get_option(&cpu_fan_control.pwm_max, "cpu_dutycycle_max");

		if( get_option(&byte, "chassis_fan_control") == CB_SUCCESS)
			case_fan_control.enable = byte ? 1 : 0;
		get_option(&case_fan_control.polarity, "chassis_fan_polarity");
		get_option(&case_fan_control.t_min, "chassis_t_min");
		get_option(&case_fan_control.t_max, "chassis_t_max");
		get_option(&case_fan_control.pwm_min, "chassis_dutycycle_min");
		get_option(&case_fan_control.pwm_max, "chassis_dutycycle_max");

	}

	printk(BIOS_DEBUG, "cpu_fan_control:%s", cpu_fan_control.enable ? "enable" : "disable");
	printk(BIOS_DEBUG, " cpu_fan_polarity:%s", cpu_fan_control.polarity ? "low" : "high");

	printk(BIOS_DEBUG, " cpu_t_min:%s", TEMPERATURE_INFO(cpu_fan_control.t_min));
	cpu_fan_control.t_min = TEMPERATURE(cpu_fan_control.t_min, cpu_fan_control_defaults.t_min);

	printk(BIOS_DEBUG, " cpu_t_max:%s", TEMPERATURE_INFO(cpu_fan_control.t_max));
	cpu_fan_control.t_max = TEMPERATURE(cpu_fan_control.t_max, cpu_fan_control_defaults.t_max);

	printk(BIOS_DEBUG, " cpu_pwm_min:%s", DUTYCYCLE_INFO(cpu_fan_control.pwm_min));
	cpu_fan_control.pwm_min = DUTYCYCLE(cpu_fan_control.pwm_min, cpu_fan_control_defaults.pwm_min);

	printk(BIOS_DEBUG, " cpu_pwm_max:%s", DUTYCYCLE_INFO(cpu_fan_control.pwm_max));
	cpu_fan_control.pwm_max = DUTYCYCLE(cpu_fan_control.pwm_max, cpu_fan_control_defaults.pwm_max);

	cpu_fan_control.t_range = calc_trange(cpu_fan_control.t_min, cpu_fan_control.t_max);
	printk(BIOS_DEBUG, " cpu_t_range:0x%02x\n", cpu_fan_control.t_range);
	cpu_fan_control.t_range <<= 4;
	cpu_fan_control.t_range |= (4 << 0); // 35.3Hz

	printk(BIOS_DEBUG, "chassis_fan_control:%s", case_fan_control.enable ? "enable" : "disable");
	printk(BIOS_DEBUG, " chassis_fan_polarity:%s", case_fan_control.polarity ? "low" : "high");

	printk(BIOS_DEBUG, " chassis_t_min:%s", TEMPERATURE_INFO(case_fan_control.t_min));
	case_fan_control.t_min = TEMPERATURE(case_fan_control.t_min, case_fan_control_defaults.t_min);

	printk(BIOS_DEBUG, " chassis_t_max:%s", TEMPERATURE_INFO(case_fan_control.t_max));
	case_fan_control.t_max = TEMPERATURE(case_fan_control.t_max, case_fan_control_defaults.t_max);

	printk(BIOS_DEBUG, " chassis_pwm_min:%s", DUTYCYCLE_INFO(case_fan_control.pwm_min));
	case_fan_control.pwm_min = DUTYCYCLE(case_fan_control.pwm_min, case_fan_control_defaults.pwm_min);

	printk(BIOS_DEBUG, " chassis_pwm_max:%s", DUTYCYCLE_INFO(case_fan_control.pwm_max));
	case_fan_control.pwm_max = DUTYCYCLE(case_fan_control.pwm_max, case_fan_control_defaults.pwm_max);

	case_fan_control.t_range = calc_trange(case_fan_control.t_min, case_fan_control.t_max);
	printk(BIOS_DEBUG, " case_t_range:0x%02x\n", case_fan_control.t_range);
	case_fan_control.t_range <<= 4;
	case_fan_control.t_range |= (4 << 0); // 35.3Hz

	cpu_pwm_conf = (((cpu_fan_control.polarity & 0x1) << 4) | 0x2); // bit 4 control polarity of PWMx output
	case_pwm_conf = (((case_fan_control.polarity & 0x1) << 4) | 0x2); // bit 4 control polarity of PWMx output
	cpu_pwm_conf |= cpu_fan_control.enable ? (0 << 5) : (7 << 5);  // manual control
	case_pwm_conf |= case_fan_control.enable ? (1 << 5) : (7 << 5); // local temp

	/* set adt7475 */

	adt7475_write_byte(REG_CONFIG1, 0x04);  // clear register, bit 2 is read only

	/* Config Register 6:  */
	adt7475_write_byte(REG_CONFIG6, 0x00);
	/* Config Register 7 */
	adt7475_write_byte(REG_CONFIG7, 0x00);

	/* Config Register 5: */
	/* set Offset 64 format, enable THERM on Remote 1& Local */
	adt7475_write_byte(REG_CONFIG5, TWOS_COMPL ? 0x61 : 0x60);
	/* No offset for remote 1 */
	adt7475_write_byte(TEMP_OFFSET_REG(0), 0x00);
	/* No offset for local */
	adt7475_write_byte(TEMP_OFFSET_REG(1), 0x00);
	/* No offset for remote 2 */
	adt7475_write_byte(TEMP_OFFSET_REG(2), 0x00);

	/* remote 1 low temp limit */
	adt7475_write_byte(TEMP_MIN_REG(0), 0x00);
	/* remote 1 High temp limit    (90C) */
	adt7475_write_byte(TEMP_MAX_REG(0), 0x9a);

	/* local Low Temp Limit */
	adt7475_write_byte(TEMP_MIN_REG(1), 0x00);
	/* local High Limit    (90C) */
	adt7475_write_byte(TEMP_MAX_REG(1), 0x9a);

	/*  remote 1 therm temp limit    (95C) */
	adt7475_write_byte(TEMP_THERM_REG(0), 0x9f);
	/* local therm temp limit    (95C) */
	adt7475_write_byte(TEMP_THERM_REG(1), 0x9f);

	/* PWM 1 configuration register    CPU fan controlled by CPU Thermal Diode */
	adt7475_write_byte(PWM_CONFIG_REG(0), cpu_pwm_conf);
	/* PWM 3 configuration register    Case fan controlled by ADTxxxx temp */
	adt7475_write_byte(PWM_CONFIG_REG(2), case_pwm_conf);

	if( cpu_fan_control.enable ) {
		/* PWM 1 minimum duty cycle     (37%) */
		adt7475_write_byte(PWM_MIN_REG(0), cpu_fan_control.pwm_min);
		/* PWM 1 Maximum duty cycle    (100%) */
		adt7475_write_byte(PWM_MAX_REG(0), cpu_fan_control.pwm_max);
		/*  Remote 1 temperature Tmin     (32C) */
		adt7475_write_byte(TEMP_TMIN_REG(0), cpu_fan_control.t_min);
		/* remote 1 Trange            (53C ramp range) */
		adt7475_write_byte(TEMP_TRANGE_REG(0), cpu_fan_control.t_range);
	} else {
		adt7475_write_byte(PWM_REG(0), cpu_fan_control.pwm_max);
	}

	if( case_fan_control.enable ) {
		/* PWM 2 minimum duty cycle     (37%) */
		adt7475_write_byte(PWM_MIN_REG(2), case_fan_control.pwm_min);
		/* PWM 2 Maximum Duty Cycle    (100%) */
		adt7475_write_byte(PWM_MAX_REG(2), case_fan_control.pwm_max);
		/* local temperature Tmin     (32C) */
		adt7475_write_byte(TEMP_TMIN_REG(1), case_fan_control.t_min);
		/* local Trange            (53C ramp range) */
		adt7475_write_byte(TEMP_TRANGE_REG(1), case_fan_control.t_range); // Local TRange
		adt7475_write_byte(TEMP_TRANGE_REG(2), case_fan_control.t_range); // PWM2 Freq
	} else {
		adt7475_write_byte(PWM_REG(2), case_fan_control.pwm_max);
	}

	/* Config Register 3 - enable smbalert & therm */
	adt7475_write_byte(0x78, 0x03);
	/* Config Register 4 - enable therm output */
	adt7475_write_byte(0x7d, 0x09);
	/* Interrupt Mask Register 2 - Mask SMB alert for Therm Conditions, Fan 3 fault, SmbAlert Fan for Therm Timer event */
	adt7475_write_byte(0x75, 0x2e);

	/* Config Register 1 Set Start bit */
	adt7475_write_byte(0x40, 0x05);

	/* Read status register to clear any old errors */
	byte2 = adt7475_read_byte(0x42);
	byte = adt7475_read_byte(0x41);

	printk(BIOS_DEBUG, "Init 'Thermal Monitor' end , status 0x42 = 0x%02x, status 0x41 = 0x%02x\n",
		    byte2, byte);

}

static void patch_mmio_nonposted( void )
{
	unsigned reg, index;
	resource_t rbase, rend;
	u32 base, limit;
	struct resource *resource;
	device_t dev;
	device_t k8_f1 = dev_find_slot(0, PCI_DEVFN(0x18,1));

	printk(BIOS_DEBUG,"%s ...\n", __func__);

	dev = dev_find_slot(1, PCI_DEVFN(5,0));
	// the uma frame buffer
	index = 0x10;
	resource = probe_resource(dev, index);
	if( resource ) {
		// fixup resource nonposted in k8 mmio
		/* Get the base address */
		rbase = (resource->base >> 8) & ~(0xff);
		/* Get the limit (rounded up) */
		rend  = (resource_end(resource) >> 8) & ~(0xff);

		printk(BIOS_DEBUG,"%s %x base = %0llx limit = %0llx\n", dev_path(dev), index, rbase, rend);

		for( reg = 0xb8; reg >= 0x80; reg -= 8 ) {
			base = pci_read_config32(k8_f1,reg);
			limit = pci_read_config32(k8_f1,reg+4);
			printk(BIOS_DEBUG," %02x[%08x] %02x[%08x]", reg, base, reg+4, limit);
			if( ((base & ~(0xff)) == rbase) && ((limit & ~(0xff)) == rend) ) {
				limit |= (1 << 7);
				printk(BIOS_DEBUG, "\nPatching %s %x <- %08x", dev_path(k8_f1), reg, limit);
				pci_write_config32(k8_f1, reg+4, limit);
				break;
			}
		}
		printk(BIOS_DEBUG, "\n");
	}
}

struct {
	unsigned int bus;
	unsigned int devfn;
} slot[] = {
	{0, PCI_DEVFN(0,0)},
	{0, PCI_DEVFN(18,0)},
	{0, PCI_DEVFN(19,0)},{0, PCI_DEVFN(19,1)},{0, PCI_DEVFN(19,2)},{0, PCI_DEVFN(19,3)},{0, PCI_DEVFN(19,4)},{0, PCI_DEVFN(19,5)},
	{0, PCI_DEVFN(20,0)},{0, PCI_DEVFN(20,1)},{0, PCI_DEVFN(20,2)},{0, PCI_DEVFN(20,3)},{0, PCI_DEVFN(20,5)},{0, PCI_DEVFN(20,6)},
	{0, PCI_DEVFN(5,0)},{0, PCI_DEVFN(5,2)},
	{255,0},
};


unsigned int plx_present = 0;

static void update_subsystemid( device_t dev )
{
	int i;

	dev->subsystem_vendor = 0x110a;
	if( plx_present ){
		dev->subsystem_device = 0x4076; // U1P1 = 0x4076, U1P0 = 0x4077
	} else {
		dev->subsystem_device = 0x4077; // U1P0 = 0x4077
	}
	printk(BIOS_INFO, "%s [%x/%x]\n", dev_name(dev), dev->subsystem_vendor, dev->subsystem_device );
	for( i=0; slot[i].bus < 255; i++) {
		device_t d;
		d = dev_find_slot(slot[i].bus,slot[i].devfn);
		if( d ) {
			printk(BIOS_DEBUG,"%s subsystem <- %x/%x\n", dev_path(d), dev->subsystem_vendor, dev->subsystem_device);
			d->subsystem_device = dev->subsystem_device;
		}
	}
}

static void detect_hw_variant( device_t dev )
{

	device_t nb_dev =0, dev2 = 0;
	struct southbridge_amd_rs690_config *cfg;
	u32 lc_state, id = 0;

	printk(BIOS_INFO, "Scan for PLX device ...\n");
	nb_dev = dev_find_slot(0, PCI_DEVFN(0, 0));
	if (!nb_dev) {
		die("CAN NOT FIND RS690 DEVICE, HALT!\n");
		/* NOT REACHED */
	}

	dev2 = dev_find_slot(0, PCI_DEVFN(2, 0));
	if (!dev2) {
		die("CAN NOT FIND GFX DEVICE 2, HALT!\n");
		/* NOT REACHED */
	}
	PcieReleasePortTraining(nb_dev, dev2, 2); // we assume PLX is connected to port 2

	mdelay(40);
	lc_state = nbpcie_p_read_index(dev2, 0xa5);	/* lc_state */
	printk(BIOS_DEBUG, "lc current state=%x\n", lc_state);
	/* LC_CURRENT_STATE = bit0-5 */
	switch( lc_state & 0x3f ){
	case 0x00:
	case 0x01:
	case 0x02:
	case 0x03:
	case 0x04:
		printk(BIOS_NOTICE, "No device present, skipping PLX scan ..\n");
		break;
	case 0x07:
	case 0x10:
	{
		struct device dummy;
		u32 pci_primary_bus, buses;
		u16 secondary, subordinate;

		printk(BIOS_DEBUG, "Scan for PLX bridge behind %s[%x]\n", dev_path(dev2), pci_read_config32(dev2, PCI_VENDOR_ID));
		// save the existing primary/secondary/subordinate bus number configuration.
		secondary = dev2->bus->secondary;
		subordinate = dev2->bus->subordinate;
		buses = pci_primary_bus = pci_read_config32(dev2, PCI_PRIMARY_BUS);

		// Configure the bus numbers for this bridge
		// bus number 1 is for internal gfx device, so we start with busnumber 2

		buses &= 0xff000000;
		buses |= ((2 << 8) | (0xff << 16));
		// setup the buses in device 2
		pci_write_config32(dev2,PCI_PRIMARY_BUS, buses);

		// fake a device descriptor for a device behind device 2
		dummy.bus = dev2->bus;
		dummy.bus->secondary = (buses >> 8) & 0xff;
		dummy.bus->subordinate = (buses >> 16) & 0xff;
		dummy.path.type = DEVICE_PATH_PCI;
		dummy.path.pci.devfn = PCI_DEVFN(0,0); // PLX: device number 0, function 0

		id = pci_read_config32(&dummy, PCI_VENDOR_ID);
		/* Have we found something?
		 * Some broken boards return 0 if a slot is empty, but
		 * the expected answer is 0xffffffff
		 */
		if ((id == 0xffffffff) || (id == 0x00000000) || (id == 0x0000ffff) || (id == 0xffff0000)) {
			printk(BIOS_DEBUG, "%s, bad id 0x%x\n", dev_path(&dummy), id);
		} else {
			printk(BIOS_DEBUG, "found device [%x]\n", id);
		}
		// restore changes made for device 2
		dev2->bus->secondary = secondary;
		dev2->bus->subordinate = subordinate;
		pci_write_config32(dev2, PCI_PRIMARY_BUS, pci_primary_bus);
	}
		break;
	default:
		break;
	}

	plx_present = 0;
	if( id == PLX_VIDDID ){
		printk(BIOS_INFO, "found PLX device\n");
		plx_present = 1;
		cfg = (struct southbridge_amd_rs690_config *)dev2->chip_info;
		if( cfg->gfx_tmds ) {
			printk(BIOS_INFO, "Disable 'gfx_tmds' support\n");
			cfg->gfx_tmds = 0;
			cfg->gfx_link_width = 4;
		}
		return;
	}
}

static void smm_lock( void )
{
	/* LOCK the SMM memory window and enable normal SMM.
	 * After running this function, only a full reset can
	 * make the SMM registers writable again.
	 */
	printk(BIOS_DEBUG, "Locking SMM.\n");
	pci_write_config8(dev_find_slot(0, PCI_DEVFN(0, 0)), 0x69,
			D_LCK | G_SMRAME | A_BASE_SEG);
}

 /**
 * @brief Init
 *
 * @param dev - the root device
 */

static void mainboard_init(device_t dev)
{
#if CONFIG_PCI_OPTION_ROM_RUN_REALMODE
	INT15_function_extensions int15_func;
#endif

	printk(BIOS_DEBUG, "%s %s[%x/%x] %s\n",
		dev_name(dev), dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__);

#if CONFIG_PCI_OPTION_ROM_RUN_REALMODE
	if (get_option(&int15_func.regs.func00_LCD_panel_id, "lcd_panel_id") != CB_SUCCESS)
		int15_func.regs.func00_LCD_panel_id = PANEL_TABLE_ID_NO;
	int15_func.regs.func05_TV_standard = TV_MODE_NO;
	install_INT15_function_extensions(&int15_func);
#endif
	set_thermal_config();
	pm_init();
	cable_detect();
	patch_mmio_nonposted();
	smm_lock();
}

/*************************************************
* enable the dedicated function in sina board.
* This function called early than rs690_enable.
*************************************************/
static void mainboard_enable(device_t dev)
{

	printk(BIOS_INFO, "%s %s[%x/%x] %s\n",
		dev_name(dev), dev_path(dev), dev->subsystem_vendor, dev->subsystem_device, __func__);
#if CONFIG_PCI_OPTION_ROM_RUN_YABEL
	/* Install custom int15 handler for VGA OPROM */
	mainboard_interrupt_handlers(0x15, &int15_handler);
#endif

	detect_hw_variant(dev);
	update_subsystemid(dev);

	dev->ops->init = mainboard_init;  // rest of mainboard init later
	dev->ops->acpi_inject_dsdt_generator = mainboard_inject_dsdt;
}

struct chip_operations mainboard_ops = {
	.enable_dev = mainboard_enable,
};