summaryrefslogtreecommitdiff
path: root/src/mainboard/supermicro/h8qgi/devicetree.cb
blob: 5ba52b624aa80820bcdccd093d956c32036743e7 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
#
# This file is part of the coreboot project.
#
# Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; version 2 of the License.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
chip northbridge/amd/agesa/family15/root_complex
	device cpu_cluster 0 on
		chip cpu/amd/agesa/family15
			device lapic 0x20 on end #f15
			#device lapic 0x10 on end #f10
		end
	end
	device domain 0 on
		subsystemid 0x15d9 0xab11 inherit #SuperMicro
		chip northbridge/amd/agesa/family15 # CPU side of HT root complex
			device pci 18.0 on     # Put IO-HUB at link_num 0, Instead of HT Link topology
				chip northbridge/amd/cimx/rd890 # Southbridge PCI side of HT Root complex
					device pci 0.0 on  end # HT Root Complex 0x9600
					device pci 0.1 off end # CLKCONFIG
					device pci 2.0 on  end # GPP1 Port0  x16 SLOT4, 0x5A16
					device pci 3.0 off end # GPP1 Port1
					device pci 4.0 off end # GPP3a Port0  x4 SAS
					device pci 5.0 off end # GPP3a Port1
					device pci 6.0 off end # GPP3a Port2
					device pci 7.0 off end # GPP3a Port3
					device pci 8.0 off end # NB/SB Link P2P bridge, should be hidden at boot time
					device pci 9.0 off end # GPP3a Port4  x1 NC
					device pci a.0 off end # GPP3a Port5  x1 NC
					device pci b.0 off end # GPP2 Port0 (Not for sr5650)
					device pci c.0 off end # GPP2 Port1 (Not for sr5650/sr5670)
					device pci d.0 on  end # GPP3b Port0 (Not for sr5650/sr5670) 0x5A1E, Intel 82576
					register "gpp1_configuration" = "0"   # Configuration 16:0 default
					register "gpp2_configuration" = "1"   # Configuration 8:8
					register "gpp3a_configuration" = "2"   # 2 Configuration 4:1:1:0:0:0, 11 Configuration 1:1:1:1:1:1
					register "port_enable" = "0x2104"
				end #northbridge/amd/cimx/rd890
				chip southbridge/amd/cimx/sb700 # it is under NB/SB Link, but on the same pci bus
					device pci 11.0 on end # SATA
					device pci 12.0 on end # USB1
					device pci 12.1 on end # USB1
					device pci 12.2 on end # USB1
					device pci 13.0 on end # USB2
					device pci 13.1 on end # USB2
					device pci 13.2 on end # USB2
					device pci 14.0 on end # SM
					device pci 14.1 off end # IDE  0x439c
					device pci 14.2 off end # HDA  0x4383, h8qgi not have codec.
					device pci 14.3 on # LPC  0x439d
						chip superio/winbond/w83627dhg
							device pnp 2e.0 off #  Floppy
								io 0x60 = 0x3f0
								irq 0x70 = 6
								drq 0x74 = 2
							end
							device pnp 2e.1 off #  Parallel Port
								io 0x60 = 0x378
								irq 0x70 = 7
							end
							device pnp 2e.2 on  #  Com1
								io 0x60 = 0x3f8
								irq 0x70 = 4
							end
							device pnp 2e.3 on  #  Com2
								io 0x60 = 0x2f8
								irq 0x70 = 3
							end
							## though UARTs are on the NUVOTON BMC, superio only used to support PS2 KB/MS##
							device pnp 2e.5 on #  PS/2 keyboard & mouse
								io 0x60 = 0x60
								io 0x62 = 0x64
								irq 0x70 = 0x01 #keyboard
								irq 0x72 = 0x0C #mouse
							end
							device pnp 2e.6 off #  SPI
							end
							device pnp 2e.307 off #  GPIO6
							end
							device pnp 2e.8 off #  WDTO#, PLED
							end
							device pnp 2e.009 off #  GPIO2
							end
							device pnp 2e.109 off #  GPIO3
							end
							device pnp 2e.209 off #  GPIO4
							end
							device pnp 2e.309 off #  GPIO5
							end
							device pnp 2e.a off #  ACPI
							end
							device pnp 2e.b off # HWM
								io 0x60 = 0x290
							end
							device pnp 2e.c off # PECI, SST
							end
						end #superio/winbond/w83627dhg
						chip drivers/i2c/w83795
							register "fanin_ctl1" = "0xff"			# Enable monitoring of FANIN1 - FANIN8
							register "fanin_ctl2" = "0x00"			# Connect FANIN11 - FANIN14 to alternate functions
							register "temp_ctl1" = "0x2a"			# Enable monitoring of DTS, VSEN12, and VSEN13
							register "temp_ctl2" = "0x01"			# Enable monitoring of TD1/TR1
							register "temp_dtse" = "0x03"			# Enable DTS1 and DTS2
							register "volt_ctl1" = "0xff"			# Enable monitoring of VSEN1 - VSEN8
							register "volt_ctl2" = "0xf7"			# Enable monitoring of VSEN9 - VSEN11, 3VDD, 3VSB, and VBAT
							register "temp1_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp1)
							register "temp2_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp2)
							register "temp3_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp3)
							register "temp4_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp4)
							register "temp5_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp5)
							register "temp6_fan_select" = "0x00"		# All fans to manual mode (no dependence on Temp6)
							register "temp1_source_select" = "0x00"		# Use TD1/TR1 as data source for Temp1
							register "temp2_source_select" = "0x00"		# Use TD2/TR2 as data source for Temp2
							register "temp3_source_select" = "0x00"		# Use TD3/TR3 as data source for Temp3
							register "temp4_source_select" = "0x00"		# Use TD4/TR4 as data source for Temp4
							register "temp5_source_select" = "0x00"		# Use TR5 as data source for Temp5
							register "temp6_source_select" = "0x00"		# Use TR6 as data source for Temp6
							register "tr1_critical_temperature" = "85"	# Set TD1/TR1 critical temperature to 85°C
							register "tr1_critical_hysteresis" = "80"	# Set TD1/TR1 critical hysteresis temperature to 80°C
							register "tr1_warning_temperature" = "70"	# Set TD1/TR1 warning temperature to 70°C
							register "tr1_warning_hysteresis" = "65"	# Set TD1/TR1 warning hysteresis temperature to 65°C
							register "dts_critical_temperature" = "85"	# Set DTS (CPU) critical temperature to 85°C
							register "dts_critical_hysteresis" = "80"	# Set DTS (CPU) critical hysteresis temperature to 80°C
							register "dts_warning_temperature" = "70"	# Set DTS (CPU) warning temperature to 70°C
							register "dts_warning_hysteresis" = "65"	# Set DTS (CPU) warning hysteresis temperature to 65°C
							register "temp1_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
							register "temp2_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
							register "temp3_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
							register "temp4_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
							register "temp5_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
							register "temp6_critical_temperature" = "80"	# Set Temp1 critical temperature to 80°C
							register "temp1_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
							register "temp2_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
							register "temp3_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
							register "temp4_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
							register "temp5_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
							register "temp6_target_temperature" = "80"	# Set Temp1 target temperature to 80°C
							register "fan1_nonstop" = "7"			# Set Fan 1 minimum speed
							register "fan2_nonstop" = "7"			# Set Fan 2 minimum speed
							register "fan3_nonstop" = "7"			# Set Fan 3 minimum speed
							register "fan4_nonstop" = "7"			# Set Fan 4 minimum speed
							register "fan5_nonstop" = "7"			# Set Fan 5 minimum speed
							register "fan6_nonstop" = "7"			# Set Fan 6 minimum speed
							register "fan7_nonstop" = "7"			# Set Fan 7 minimum speed
							register "fan8_nonstop" = "7"			# Set Fan 8 minimum speed
							register "default_speed" = "100"		# All fans to full speed on power up
							register "fan1_duty" = "100"			# Fan 1 to full speed
							register "fan2_duty" = "100"			# Fan 2 to full speed
							register "fan3_duty" = "100"			# Fan 3 to full speed
							register "fan4_duty" = "100"			# Fan 4 to full speed
							register "fan5_duty" = "100"			# Fan 5 to full speed
							register "fan6_duty" = "100"			# Fan 6 to full speed
							register "fan7_duty" = "100"			# Fan 7 to full speed
							register "fan8_duty" = "100"			# Fan 8 to full speed
							register "vcore1_high_limit_mv" = "1500"	# VCORE1 (Node 0) high limit to 1.5V
							register "vcore1_low_limit_mv" = "900"		# VCORE1 (Node 0) low limit to 0.9V
							register "vcore2_high_limit_mv" = "1500"	# VCORE2 (Node 1) high limit to 1.5V
							register "vcore2_low_limit_mv" = "900"		# VCORE2 (Node 1) low limit to 0.9V
							register "vsen3_high_limit_mv" = "1600"		# VSEN1 (Node 0 RAM voltage) high limit to 1.6V
							register "vsen3_low_limit_mv" = "1100"		# VSEN1 (Node 0 RAM voltage) low limit to 1.1V
							register "vsen4_high_limit_mv" = "1600"		# VSEN2 (Node 1 RAM voltage) high limit to 1.6V
							register "vsen4_low_limit_mv" = "1100"		# VSEN2 (Node 1 RAM voltage) low limit to 1.1V
							register "vsen5_high_limit_mv" = "1250"		# VSEN5 (Node 0 HT link voltage) high limit to 1.25V
							register "vsen5_low_limit_mv" = "1150"		# VSEN5 (Node 0 HT link voltage) low limit to 1.15V
							register "vsen6_high_limit_mv" = "1250"		# VSEN6 (Node 1 HT link voltage) high limit to 1.25V
							register "vsen6_low_limit_mv" = "1150"		# VSEN6 (Node 1 HT link voltage) low limit to 1.15V
							register "vsen7_high_limit_mv" = "1150"		# VSEN7 (Northbridge core voltage) high limit to 1.15V
							register "vsen7_low_limit_mv" = "1050"		# VSEN7 (Northbridge core voltage) low limit to 1.05V
							register "vsen8_high_limit_mv" = "1900"		# VSEN8 (+1.8V) high limit to 1.9V
							register "vsen8_low_limit_mv" = "1700"		# VSEN8 (+1.8V) low limit to 1.7V
							register "vsen9_high_limit_mv" = "1250"		# VSEN9 (+1.2V) high limit to 1.25V
							register "vsen9_low_limit_mv" = "1150"		# VSEN9 (+1.2V) low limit to 1.15V
							register "vsen10_high_limit_mv" = "1150"	# VSEN10 (+1.1V) high limit to 1.15V
							register "vsen10_low_limit_mv" = "1050"		# VSEN10 (+1.1V) low limit to 1.05V
							register "vsen11_high_limit_mv" = "1625"	# VSEN11 (5VSB, scaling factor ~3.2) high limit to 5.2V
							register "vsen11_low_limit_mv" = "1500"		# VSEN11 (5VSB, scaling factor ~3.2) low limit to 4.8V
							register "vsen12_high_limit_mv" = "1083"	# VSEN12 (+12V, scaling factor ~12) high limit to 13V
							register "vsen12_low_limit_mv" = "917"		# VSEN12 (+12V, scaling factor ~12) low limit to 11V
							register "vsen13_high_limit_mv" = "1625"	# VSEN13 (+5V, scaling factor ~3.2) high limit to 5.2V
							register "vsen13_low_limit_mv" = "1500"		# VSEN13 (+5V, scaling factor ~3.2) low limit to 4.8V
							register "vdd_high_limit_mv" = "3500"		# 3VDD high limit to 3.5V
							register "vdd_low_limit_mv" = "3100"		# 3VDD low limit to 3.1V
							register "vsb_high_limit_mv" = "3500"		# 3VSB high limit to 3.5V
							register "vsb_low_limit_mv" = "3100"		# 3VSB low limit to 3.1V
							register "vbat_high_limit_mv" = "3500"		# VBAT (+3V) high limit to 3.5V
							register "vbat_low_limit_mv" = "2500"		# VBAT (+3V) low limit to 2.5V
							register "smbus_aux" = "0"			# Device located on primary SMBUS
							device pnp 5e on #hwm
							end
						end #drivers/i2c/w83795
					end # LPC
					device pci 14.4 on
						device pci 4.0 on end # onboard VGA
					end # PCI 0x4384
					device pci 14.5 on end # USB 3
					register "boot_switch_sata_ide" = "0"   # 0: boot from SATA. 1: IDE
				end # southbridge/amd/cimx/sb700
			end # device pci 18.0

			device pci 18.1 on end
			device pci 18.2 on end
			device pci 18.3 on end
			device pci 18.4 on end
			device pci 18.5 on end #f15

			register "spdAddrLookup" = "
			{
				{ {0xAC, 0xAE}, {0xA8, 0xAA}, {0xA4, 0xA6}, {0xA0, 0xA2}, }, // socket 0
				{ {0xAC, 0xAE}, {0xA8, 0xAA}, {0xA4, 0xA6}, {0xA0, 0xA2}, }, // socket 1
				{ {0xAC, 0xAE}, {0xA8, 0xAA}, {0xA4, 0xA6}, {0xA0, 0xA2}, }, // socket 2
				{ {0xAC, 0xAE}, {0xA8, 0xAA}, {0xA4, 0xA6}, {0xA0, 0xA2}, }, // socket 3
			}"
		end #chip northbridge/amd/agesa/family15 # CPU side of HT root complex
	end #domain
end #northbridge/amd/agesa/family15/root_complex