summaryrefslogtreecommitdiff
path: root/src/mainboard/supermicro/h8scm/buildOpts.c
blob: 95dffaa4407aa78e5d5e750145eb15f08bc894cb (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2011 - 2012 Advanced Micro Devices, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
 */

#include <stdlib.h>

#include "AGESA.h"
#include "CommonReturns.h"
#include "AdvancedApi.h"
#include <PlatformMemoryConfiguration.h>
#include "Filecode.h"
#define FILECODE PLATFORM_SPECIFIC_OPTIONS_FILECODE
//#define OPTION_HW_DQS_REC_EN_TRAINING TRUE
/* AGESA will check the OEM configuration during preprocessing stage,
 * coreboot enable -Wundef option, so we should make sure we have all contanstand defined
 */
/* MEMORY_BUS_SPEED */
#define DDR400_FREQUENCY		200	///< DDR 400
#define DDR533_FREQUENCY		266	///< DDR 533
#define DDR667_FREQUENCY		333	///< DDR 667
#define DDR800_FREQUENCY		400	///< DDR 800
#define DDR1066_FREQUENCY		533	///< DDR 1066
#define DDR1333_FREQUENCY		667	///< DDR 1333
#define DDR1600_FREQUENCY		800	///< DDR 1600
#define DDR1866_FREQUENCY		933	///< DDR 1866
#define UNSUPPORTED_DDR_FREQUENCY	934	///< Highest limit of DDR frequency

/* QUANDRANK_TYPE */
#define QUADRANK_REGISTERED		0	///< Quadrank registered DIMM
#define QUADRANK_UNBUFFERED		1	///< Quadrank unbuffered DIMM

/* USER_MEMORY_TIMING_MODE */
#define TIMING_MODE_AUTO		0	///< Use best rate possible
#define TIMING_MODE_LIMITED		1	///< Set user top limit
#define TIMING_MODE_SPECIFIC		2	///< Set user specified speed

/* POWER_DOWN_MODE */
#define POWER_DOWN_BY_CHANNEL		0	///< Channel power down mode
#define POWER_DOWN_BY_CHIP_SELECT	1	///< Chip select power down mode

/* User makes option selections here
 * Comment out the items wanted to be included in the build.
 * Uncomment those items you with to REMOVE from the build.
 */
//#define BLDOPT_REMOVE_UDIMMS_SUPPORT           TRUE
//#define BLDOPT_REMOVE_RDIMMS_SUPPORT           TRUE
//#define BLDOPT_REMOVE_ECC_SUPPORT              TRUE
//#define BLDOPT_REMOVE_BANK_INTERLEAVE          TRUE
//#define BLDOPT_REMOVE_DCT_INTERLEAVE           TRUE
//#define BLDOPT_REMOVE_NODE_INTERLEAVE          TRUE
//#define BLDOPT_REMOVE_PARALLEL_TRAINING        TRUE
//#define BLDOPT_REMOVE_ONLINE_SPARE_SUPPORT     TRUE
#define BLDOPT_REMOVE_MEM_RESTORE_SUPPORT      TRUE
//#define BLDOPT_REMOVE_MULTISOCKET_SUPPORT      TRUE
//#define BLDOPT_REMOVE_ACPI_PSTATES             TRUE
//#define BLDOPT_REMOVE_SRAT                     TRUE
//#define BLDOPT_REMOVE_SLIT                     TRUE
//#define BLDOPT_REMOVE_WHEA                     TRUE
//#define BLDOPT_REMOVE_DMI                      TRUE

/*f15 Rev A1 ucode patch CpuF15OrMicrocodePatch0600011F */
#define BLDOPT_REMOVE_EARLY_SAMPLES		FALSE

//#define BLDOPT_REMOVE_HT_ASSIST                TRUE
//#define BLDOPT_REMOVE_MSG_BASED_C1E            TRUE
//#define BLDCFG_REMOVE_ACPI_PSTATES_PPC               TRUE
//#define BLDCFG_REMOVE_ACPI_PSTATES_PCT               TRUE
//#define BLDCFG_REMOVE_ACPI_PSTATES_PSD               TRUE
//#define BLDCFG_REMOVE_ACPI_PSTATES_PSS               TRUE
//#define BLDCFG_REMOVE_ACPI_PSTATES_XPSS              TRUE

/* Build configuration values here.
 */
#define BLDCFG_VRM_CURRENT_LIMIT                 120000
#define BLDCFG_VRM_LOW_POWER_THRESHOLD           0
#define BLDCFG_VRM_INRUSH_CURRENT_LIMIT          0
#define BLDCFG_PLAT_NUM_IO_APICS                 3
#define BLDCFG_CORE_LEVELING_MODE                CORE_LEVEL_LOWEST
#define BLDCFG_MEM_INIT_PSTATE                   0
#define BLDCFG_AMD_PSTATE_CAP_VALUE              0

#define BLDCFG_AMD_PLATFORM_TYPE                  AMD_PLATFORM_SERVER

#define BLDCFG_MEMORY_BUS_FREQUENCY_LIMIT         DDR800_FREQUENCY//1600
#define BLDCFG_MEMORY_MODE_UNGANGED               TRUE
#define BLDCFG_MEMORY_QUAD_RANK_CAPABLE           TRUE
#define BLDCFG_MEMORY_QUADRANK_TYPE               QUADRANK_REGISTERED
#define BLDCFG_MEMORY_RDIMM_CAPABLE               TRUE
#define BLDCFG_MEMORY_UDIMM_CAPABLE               TRUE
#define BLDCFG_MEMORY_SODIMM_CAPABLE              FALSE
#define BLDCFG_LIMIT_MEMORY_TO_BELOW_1TB          TRUE
#define BLDCFG_MEMORY_ENABLE_BANK_INTERLEAVING    FALSE//TRUE
#define BLDCFG_MEMORY_ENABLE_NODE_INTERLEAVING    FALSE//TRUE
#define BLDCFG_MEMORY_CHANNEL_INTERLEAVING        TRUE//TRUE
#define BLDCFG_MEMORY_POWER_DOWN                  FALSE
#define BLDCFG_POWER_DOWN_MODE                    POWER_DOWN_BY_CHANNEL
#define BLDCFG_ONLINE_SPARE                       FALSE
#define BLDCFG_BANK_SWIZZLE                       TRUE
#define BLDCFG_TIMING_MODE_SELECT                 TIMING_MODE_AUTO
#define BLDCFG_MEMORY_CLOCK_SELECT                DDR800_FREQUENCY //DDR800_FREQUENCY
#define BLDCFG_DQS_TRAINING_CONTROL               TRUE
#define BLDCFG_IGNORE_SPD_CHECKSUM                FALSE
#define BLDCFG_USE_BURST_MODE                     FALSE
#define BLDCFG_MEMORY_ALL_CLOCKS_ON               TRUE
#define BLDCFG_ENABLE_ECC_FEATURE                 TRUE
#define BLDCFG_ECC_REDIRECTION                    FALSE
#define BLDCFG_SCRUB_IC_RATE                      0
#define BLDCFG_ECC_SYNC_FLOOD                     TRUE
#define BLDCFG_ECC_SYMBOL_SIZE                    4

#define BLDCFG_PCI_MMIO_BASE                    CONFIG_MMCONF_BASE_ADDRESS
#define BLDCFG_PCI_MMIO_SIZE                    CONFIG_MMCONF_BUS_NUMBER

/**
 * Enable Message Based C1e CPU feature in multi-socket systems.
 * BLDCFG_PLATFORM_C1E_OPDATA element be defined with a valid IO port value,
 * else the feature cannot be enabled.
 */
#define BLDCFG_PLATFORM_C1E_MODE                  C1eModeMsgBased
#define BLDCFG_PLATFORM_C1E_OPDATA                0x80//TODO
//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA1        0
//#define BLDCFG_PLATFORM_C1E_MODE_OPDATA2        0

#define BLDCFG_HEAP_DRAM_ADDRESS                  0xB0000
#define BLDCFG_CFG_TEMP_PCIE_MMIO_BASE_ADDRESS    0xD0000000
#define BLDCFG_1GB_ALIGN                          FALSE
//#define BLDCFG_PROCESSOR_SCOPE_NAME0              'C'
//#define BLDCFG_PROCESSOR_SCOPE_NAME1              '0'
//

// Select the platform control flow mode for performance tuning.
#define BLDCFG_PLATFORM_CONTROL_FLOW_MODE Nfcm

/**
 * Enable the probe filtering performance tuning feature.
 * The probe filter provides filtering of broadcast probes to
 * improve link bandwidth and performance for multi- node systems.
 *
 * This feature may interact with other performance features.
 *  TRUE  -Enable the feature (default) if supported by all processors,
 *         based on revision and presence of L3 cache.
 *         The feature is not enabled if there are no coherent HT links.
 *  FALSE -Do not enable the feature regardless of the configuration.
 */
//TODO enable it,
//but AGESA set PFMode = 0; //PF Disable, HW never set PFInitDone
//hang in F10HtAssistInit() do{...} while(PFInitDone != 1)
#define BLDCFG_USE_HT_ASSIST	FALSE

/**
 * The socket and link match values are platform specific
 */
CONST MANUAL_BUID_SWAP_LIST ROMDATA h8scm_manual_swaplist[2] =
{
	{
		/* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */
		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,

		{ //BUID Swap List
			{ //BUID Swaps
				/* Each Non-coherent chain may have a list of device swaps,
				 * Each item specify a device will be swap from its current id to a new one
				 */
				/* FromID 0x00 is the chain with the southbridge */
				/* 'Move' device zero to device zero, All others are non applicable */
				{0x00, 0x00}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
				{0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF}, {0xFF, 0xFF},
			},

			{ //The ordered final BUIDs
				/* Specify the final BUID to be zero, All others are non applicable */
				0x00, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
				0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
				0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
				0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
			}
		}
	},

	/* The 2nd element in the array merely terminates the list */
	{
		HT_LIST_TERMINAL,
	}
};

#if CONFIG_HT3_SUPPORT
/**
 * The socket and link match values are platform specific
 *
 */
CONST CPU_TO_CPU_PCB_LIMITS ROMDATA h8scm_cpu2cpu_limit_list[2] =
{
	{
		/* On the reference platform, these settings apply to all coherent links */
		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,

		/* Set incoming and outgoing links to 16 bit widths, and 3.2GHz frequencies */
		HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_3200M,
	},

	/* The 2nd element in the array merely terminates the list */
	{
		HT_LIST_TERMINAL,
	}
};

CONST IO_PCB_LIMITS ROMDATA h8scm_io_limit_list[2] =
{
	{
		/* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */
		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,

		/* Set upstream and downstream links to 16 bit widths, and limit frequencies to 3.2GHz */
		HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_3200M, //Actually IO hub only support 2600M MAX
	},

	/* The 2nd element in the array merely terminates the list */
	{
		HT_LIST_TERMINAL,
	}
};
#else //CONFIG_HT3_SUPPORT == 0
CONST CPU_TO_CPU_PCB_LIMITS ROMDATA h8scm_cpu2cpu_limit_list[2] =
{
	{
		/* On the reference platform, these settings apply to all coherent links */
		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,

		/* Set incoming and outgoing links to 16 bit widths, and 1GHz frequencies */
		HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_HT1_ONLY,
	},

	/* The 2nd element in the array merely terminates the list */
	{
		HT_LIST_TERMINAL,
	}
};

CONST IO_PCB_LIMITS ROMDATA h8scm_io_limit_list[2] =
{
	{
		/* On the reference platform, there is only one nc chain, so socket & link are 'don't care' */
		HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY,

		/* Set incoming and outgoing links to 16 bit widths, and 1GHz frequencies */
		HT_WIDTH_16_BITS, HT_WIDTH_16_BITS, HT_FREQUENCY_LIMIT_HT1_ONLY,
	},

	/* The 2nd element in the array merely terminates the list */
	{
		HT_LIST_TERMINAL
	}
};
#endif //CONFIG_HT3_SUPPORT == 0

/**
 * HyperTransport links will typically require an equalization at high frequencies.
 * This is called deemphasis.
 *
 * Deemphasis is specified as levels, for example, -3 db.
 * There are two levels for each link, its receiver deemphasis level and its DCV level,
 * which is based on the far side transmitter's deemphasis.
 * For each link, different levels may be required at each link frequency.
 *
 * Coherent connections between processors should have an entry for the port on each processor.
 * There should be one entry for the host root port of each non-coherent chain.
 *
 * AGESA initialization code does not set deemphasis on IO Devices.
 * A default is provided for internal links of MCM processors, and
 * those links will generally not need deemphasis structures.
 */
CONST CPU_HT_DEEMPHASIS_LEVEL ROMDATA h8scm_deemphasis_list[] =
{
	/* Socket, Link, LowFreq, HighFreq, Receiver Deemphasis, Dcv Deemphasis */

	/* Non-coherent link deemphasis. */
	{0, 2, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone},
	{0, 2, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus5},
	{0, 2, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus5},
	{0, 2, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus7},
	{0, 2, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus7},
	{0, 2, HT_FREQUENCY_2600M, HT_FREQUENCY_2600M, DeemphasisLevelMinus11pre8, DcvLevelMinus9},

	/* Coherent link deemphasis. */
	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT3_FREQUENCY_MIN, HT_FREQUENCY_1600M, DeemphasisLevelNone, DcvLevelNone},
	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_1800M, HT_FREQUENCY_1800M, DeemphasisLevelMinus3, DcvLevelMinus3},
	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2000M, HT_FREQUENCY_2000M, DeemphasisLevelMinus6, DcvLevelMinus6},
	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2200M, HT_FREQUENCY_2200M, DeemphasisLevelMinus6, DcvLevelMinus6},
	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2400M, HT_FREQUENCY_2400M, DeemphasisLevelMinus8, DcvLevelMinus8},
	{HT_LIST_MATCH_ANY, HT_LIST_MATCH_ANY, HT_FREQUENCY_2600M, HT_FREQUENCY_MAX, DeemphasisLevelMinus11pre8, DcvLevelMinus11},

	/* End of the list */
	{
		HT_LIST_TERMINAL
	}
};

CONST AP_MTRR_SETTINGS ROMDATA h8scm_ap_mtrr_list[] =
{
	{AMD_AP_MTRR_FIX64k_00000, 0x1E1E1E1E1E1E1E1E},
	{AMD_AP_MTRR_FIX16k_80000, 0x1E1E1E1E1E1E1E1E},
	{AMD_AP_MTRR_FIX16k_A0000, 0x0000000000000000},
	{AMD_AP_MTRR_FIX4k_C0000,  0x0000000000000000},
	{AMD_AP_MTRR_FIX4k_C8000,  0x0000000000000000},
	{AMD_AP_MTRR_FIX4k_D0000,  0x0000000000000000},
	{AMD_AP_MTRR_FIX4k_D8000,  0x0000000000000000},
	{AMD_AP_MTRR_FIX4k_E0000,  0x1818181818181818},
	{AMD_AP_MTRR_FIX4k_E8000,  0x1818181818181818},
	{AMD_AP_MTRR_FIX4k_F0000,  0x1818181818181818},
	{AMD_AP_MTRR_FIX4k_F8000,  0x1818181818181818},
	{CPU_LIST_TERMINAL}
};

#define BLDCFG_BUID_SWAP_LIST			&h8scm_manual_swaplist
#define BLDCFG_HTFABRIC_LIMITS_LIST		&h8scm_cpu2cpu_limit_list
#define BLDCFG_HTCHAIN_LIMITS_LIST		&h8scm_io_limit_list
#define BLDCFG_PLATFORM_DEEMPHASIS_LIST		&h8scm_deemphasis_list
#define BLDCFG_AP_MTRR_SETTINGS_LIST		&h8scm_ap_mtrr_list

/*  Process the options...
 * This file include MUST occur AFTER the user option selection settings
 */
#define AGESA_ENTRY_INIT_RESET                    TRUE//FALSE
#define AGESA_ENTRY_INIT_RECOVERY                 FALSE
#define AGESA_ENTRY_INIT_EARLY                    TRUE
#define AGESA_ENTRY_INIT_POST                     TRUE
#define AGESA_ENTRY_INIT_ENV                      TRUE
#define AGESA_ENTRY_INIT_MID                      TRUE
#define AGESA_ENTRY_INIT_LATE                     TRUE
#define AGESA_ENTRY_INIT_S3SAVE                   TRUE
#define AGESA_ENTRY_INIT_RESUME                   TRUE
#define AGESA_ENTRY_INIT_LATE_RESTORE             TRUE
#define AGESA_ENTRY_INIT_GENERAL_SERVICES         TRUE

#include "SanMarinoInstall.h"

/*----------------------------------------------------------------------------------------
 *                        CUSTOMER OVERIDES MEMORY TABLE
 *----------------------------------------------------------------------------------------
 */

//reference BKDG Table87: works
#define F15_WL_SEED 0x3B //family15 BKDG recommand 3B RDIMM, 1A UDIMM.
#define SEED_A 0x54
#define SEED_B 0x4D
#define SEED_C 0x45
#define SEED_D 0x40

#define F10_WL_SEED 0x3B //family10 BKDG recommand 3B RDIMM, 1A UDIMM.

/*
 *  Platform Specific Overriding Table allows IBV/OEM to pass in platform information to AGESA
 *  (e.g. MemClk routing, the number of DIMM slots per channel,...). If PlatformSpecificTable
 *  is populated, AGESA will base its settings on the data from the table. Otherwise, it will
 *  use its default conservative settings.
 *  I am not sure whether DefaultPlatformMemoryConfiguration is necessary.
 *  If I comment out these code, H8SCM will still pass mem training.
 */
CONST PSO_ENTRY ROMDATA DefaultPlatformMemoryConfiguration[] = {
	//
	// The following macros are supported (use comma to separate macros):
	//
	// MEMCLK_DIS_MAP(SocketID, ChannelID, MemClkDisBit0CSMap,..., MemClkDisBit7CSMap)
	//      The MemClk pins are identified based on BKDG definition of Fn2x88[MemClkDis] bitmap.
	//      AGESA will base on this value to disable unused MemClk to save power.
	//      Example:
	//      BKDG definition of Fn2x88[MemClkDis] bitmap for AM3 package is like below:
	//           Bit AM3/S1g3 pin name
	//           0   M[B,A]_CLK_H/L[0]
	//           1   M[B,A]_CLK_H/L[1]
	//           2   M[B,A]_CLK_H/L[2]
	//           3   M[B,A]_CLK_H/L[3]
	//           4   M[B,A]_CLK_H/L[4]
	//           5   M[B,A]_CLK_H/L[5]
	//           6   M[B,A]_CLK_H/L[6]
	//           7   M[B,A]_CLK_H/L[7]
	//      And platform has the following routing:
	//           CS0   M[B,A]_CLK_H/L[4]
	//           CS1   M[B,A]_CLK_H/L[2]
	//           CS2   M[B,A]_CLK_H/L[3]
	//           CS3   M[B,A]_CLK_H/L[5]
	//      Then platform can specify the following macro:
	//      MEMCLK_DIS_MAP(ANY_SOCKET, ANY_CHANNEL, 0x00, 0x00, 0x02, 0x04, 0x01, 0x08, 0x00, 0x00)
	//
	// CKE_TRI_MAP(SocketID, ChannelID, CKETriBit0CSMap, CKETriBit1CSMap)
	//      The CKE pins are identified based on BKDG definition of Fn2x9C_0C[CKETri] bitmap.
	//      AGESA will base on this value to tristate unused CKE to save power.
	//
	// ODT_TRI_MAP(SocketID, ChannelID, ODTTriBit0CSMap,..., ODTTriBit3CSMap)
	//      The ODT pins are identified based on BKDG definition of Fn2x9C_0C[ODTTri] bitmap.
	//      AGESA will base on this value to tristate unused ODT pins to save power.
	//
	// CS_TRI_MAP(SocketID, ChannelID, CSTriBit0CSMap,..., CSTriBit7CSMap)
	//      The Chip select pins are identified based on BKDG definition of Fn2x9C_0C[ChipSelTri] bitmap.
	//      AGESA will base on this value to tristate unused Chip select to save power.
	//
	// NUMBER_OF_DIMMS_SUPPORTED(SocketID, ChannelID, NumberOfDimmSlotsPerChannel)
	//      Specifies the number of DIMM slots per channel.
	//
	// NUMBER_OF_CHIP_SELECTS_SUPPORTED(SocketID, ChannelID, NumberOfChipSelectsPerChannel)
	//      Specifies the number of Chip selects per channel.
	//
	// NUMBER_OF_CHANNELS_SUPPORTED(SocketID, NumberOfChannelsPerSocket)
	//      Specifies the number of channels per socket.
	//
	// OVERRIDE_DDR_BUS_SPEED(SocketID, ChannelID, USER_MEMORY_TIMING_MODE, MEMORY_BUS_SPEED)
	//      Specifies DDR bus speed of channel ChannelID on socket SocketID.
	//
	// DRAM_TECHNOLOGY(ANY_SOCKET, DDR3_TECHNOLOGY),
	//      Specifies the DRAM technology type of socket SocketID (DDR2, DDR3,...)
	//
	// WRITE_LEVELING_SEED(SocketID, ChannelID, Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed, Byte4Seed, Byte5Seed,
	//      Byte6Seed, Byte7Seed, ByteEccSeed)
	//      Specifies the write leveling seed for a channel of a socket.
	//

	/* Specifies the write leveling seed for a channel of a socket.
	 * WRITE_LEVELING_SEED(SocketID, ChannelID, DimmID,
	 *                     Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed,
	 *                     Byte4Seed, Byte5Seed, Byte6Seed, Byte7Seed,
	 *                     ByteEccSeed)
	 */
	WRITE_LEVELING_SEED(
			ANY_SOCKET, ANY_CHANNEL, ALL_DIMMS,
			F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, F15_WL_SEED,
			F15_WL_SEED, F15_WL_SEED, F15_WL_SEED, F15_WL_SEED,
			F15_WL_SEED),

	/* HW_RXEN_SEED(SocketID, ChannelID, DimmID,
	 *              Byte0Seed, Byte1Seed, Byte2Seed, Byte3Seed,
	 *              Byte4Seed, Byte5Seed, Byte6Seed, Byte7Seed, ByteEccSeed)
	 */
	HW_RXEN_SEED(
		ANY_SOCKET, CHANNEL_A, ALL_DIMMS,
		SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A, SEED_A,
		SEED_A),
	HW_RXEN_SEED(
		ANY_SOCKET, CHANNEL_B, ALL_DIMMS,
		SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B, SEED_B,
		SEED_B),
	HW_RXEN_SEED(
		ANY_SOCKET, CHANNEL_C, ALL_DIMMS,
		SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C, SEED_C,
		SEED_C),
	HW_RXEN_SEED(
		ANY_SOCKET, CHANNEL_D, ALL_DIMMS,
		SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D, SEED_D,
		SEED_D),

	NUMBER_OF_DIMMS_SUPPORTED (ANY_SOCKET, ANY_CHANNEL, 2), //max 3
	PSO_END
};

/*
 * These tables are optional and may be used to adjust memory timing settings
 */
//HY Customer table
UINT8 AGESA_MEM_TABLE_HY[][sizeof (MEM_TABLE_ALIAS)] =
{
	// Hardcoded Memory Training Values

	// The following macro should be used to override training values for your platform
	//
	// DQSACCESS(MTAfterDqsRwPosTrn, MTNodes, MTDcts, MTDIMMs, BFRdDqsDly, MTOverride, 0x00, 0x04, 0x08, 0x0c, 0x10, 0x14, 0x18, 0x1c, 0x20),
	//
	//   NOTE:
	//   The following training hardcode values are example values that were taken from a tilapia motherboard
	//   with a particular DIMM configuration.  To hardcode your own values, uncomment the appropriate line in
	//   the table and replace the byte lane values with your own.
	//
	//                                                                               ------------------ BYTE LANES ----------------------
	//                                                                                BL0   BL1   BL2   BL3   BL4   BL5   BL6   Bl7   ECC
	// Write Data Timing
	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM0, BFWrDatDly, MTOverride, 0x1D, 0x20, 0x26, 0x2B, 0x37, 0x3A, 0x3e, 0x3F, 0x30),// DCT0, DIMM0
	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct0, MTDIMM1, BFWrDatDly, MTOverride, 0x1D, 0x00, 0x06, 0x0B, 0x17, 0x1A, 0x1E, 0x1F, 0x10),// DCT0, DIMM1
	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM0, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x27, 0x2B, 0x3B, 0x3B, 0x3E, 0x3E, 0x30),// DCT1, DIMM0
	// DQSACCESS(MTAfterHwWLTrnP2, MTNode0, MTDct1, MTDIMM1, BFWrDatDly, MTOverride, 0x18, 0x1D, 0x1C, 0x0B, 0x17, 0x1A, 0x1D, 0x1C, 0x10),// DCT1, DIMM1

	// DQS Receiver Enable
	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct0, MTDIMM1, BFRcvEnDly, MTOverride, 0x19, 0x0F, 0x08, 0x1D, 0x17, 0x1B, 0x03, 0x0F, 0x14),// DCT0, DIMM1
	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM0, BFRcvEnDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT1, DIMM0
	// DQSACCESS(MTAfterSwRxEnTrn, MTNode0, MTDct1, MTDIMM1, BFRcvEnDly, MTOverride, 0x19, 0x0F, 0x08, 0x1D, 0x17, 0x1B, 0x03, 0x10, 0x14),// DCT1, DIMM1

	// Write DQS Delays
	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFWrDqsDly, MTOverride, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00),// DCT0, DIMM0
	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFWrDqsDly, MTOverride, 0x06, 0x0D, 0x12, 0x1A, 0x25, 0x28, 0x2C, 0x2C, 0x44),// DCT0, DIMM1
	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFWrDqsDly, MTOverride, 0x07, 0x0E, 0x14, 0x1B, 0x24, 0x29, 0x2B, 0x2C, 0x1F),// DCT1, DIMM0
	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFWrDqsDly, MTOverride, 0x07, 0x0C, 0x14, 0x19, 0x25, 0x28, 0x2B, 0x2B, 0x1A),// DCT1, DIMM1

	// Read DQS Delays
	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x0E, 0x10),// DCT0, DIMM0
	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct0, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT0, DIMM1
	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM0, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM0
	// DQSACCESS(MTAfterDqsRwPosTrn, MTNode0, MTDct1, MTDIMM1, BFRdDqsDly, MTOverride, 0x10, 0x10, 0x0E, 0x10, 0x10, 0x10, 0x10, 0x1E, 0x10),// DCT1, DIMM1
	//--------------------------------------------------------------------------------------------------------------------------------------------------
	// TABLE END
	NBACCESS (MTEnd, 0,  0, 0, 0, 0),      // End of Table
};
UINT8 SizeOfTableHy = ARRAY_SIZE(AGESA_MEM_TABLE_HY);