1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
|
#include <device/pnp_def.h>
#define NSC_WD_DEV PNP_DEV(0x2e, 0xa)
#define NSC_WDBASE 0x600
#define ESB6300_WDBASE 0x400
#define ESB6300_GPIOBASE 0x500
static void disable_sio_watchdog(device_t dev)
{
#if 0
/* FIXME move me somewhere more appropriate */
pnp_set_logical_device(dev);
pnp_set_enable(dev, 1);
pnp_set_iobase(dev, PNP_IDX_IO0, NSC_WDBASE);
/* disable the sio watchdog */
outb(0, NSC_WDBASE + 0);
pnp_set_enable(dev, 0);
#endif
}
static void disable_esb6300_watchdog(void)
{
/* FIXME move me somewhere more appropriate */
device_t dev;
unsigned long value, base;
dev = pci_locate_device(PCI_ID(0x8086, 0x25a1), 0);
if (dev == PCI_DEV_INVALID) {
die("Missing esb6300?");
}
/* Enable I/O space */
value = pci_read_config16(dev, 0x04);
value |= (1 << 10);
pci_write_config16(dev, 0x04, value);
/* Set and enable acpibase */
pci_write_config32(dev, 0x40, ESB6300_WDBASE | 1);
pci_write_config8(dev, 0x44, 0x10);
base = ESB6300_WDBASE + 0x60;
/* Set bit 11 in TCO1_CNT */
value = inw(base + 0x08);
value |= 1 << 11;
outw(value, base + 0x08);
/* Clear TCO timeout status */
outw(0x0008, base + 0x04);
outw(0x0002, base + 0x06);
}
static void disable_jarell_frb3(void)
{
#if 0
device_t dev;
unsigned long value, base;
dev = pci_locate_device(PCI_ID(0x8086, 0x25a1), 0);
if (dev == PCI_DEV_INVALID) {
die("Missing esb6300?");
}
/* Enable I/O space */
value = pci_read_config16(dev, 0x04);
value |= (1 << 0);
pci_write_config16(dev, 0x04, value);
/* Set gpio base */
pci_write_config32(dev, 0x58, ESB6300_GPIOBASE | 1);
base = ESB6300_GPIOBASE;
/* Enable GPIO Bar */
value = pci_read_config32(dev, 0x5c);
value |= 0x10;
pci_write_config32(dev, 0x5c, value);
/* Configure GPIO 48 and 40 as GPIO */
value = inl(base + 0x30);
value |= (1 << 16) | ( 1 << 8);
outl(value, base + 0x30);
/* Configure GPIO 48 as Output */
value = inl(base + 0x34);
value &= ~(1 << 16);
outl(value, base + 0x34);
/* Toggle GPIO 48 high to low */
value = inl(base + 0x38);
value |= (1 << 16);
outl(value, base + 0x38);
value &= ~(1 << 16);
outl(value, base + 0x38);
#endif
}
static void disable_watchdogs(void)
{
// disable_sio_watchdog(NSC_WD_DEV);
disable_esb6300_watchdog();
// disable_jarell_frb3();
print_debug("Watchdogs disabled\n");
}
|
