1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <arch/io.h>
#include <boot/coreboot_tables.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/mtrr.h>
#include <device/pci_def.h>
#include <../southbridge/amd/sb600/sb600.h>
#include <../superio/ite/it8712f/it8712f.h>
#include "chip.h"
#include "tn_post_code.h"
#include "vgabios.h"
#define ADT7461_ADDRESS 0x4C
#define ARA_ADDRESS 0x0C /* Alert Response Address */
#define SMBUS_IO_BASE 0x1000
/* Video BIOS Function Extensions Specification
*/
//Callback Sub-Function 00h - Get LCD Panel ID
#define LCD_PANEL_ID_NO 0x00 /* No LCD */
#define LCD_PANEL_ID_01 0x01 /* 1024x768, 24 bits, 1 channel */
#define LCD_PANEL_ID_02 0x02 /* 1280x1024, 24 bits, 2 channels */
#define LCD_PANEL_ID_03 0x03 /* 1440x900, 24 bits, 2 channels */
#define LCD_PANEL_ID_04 0x04 /* 1680x1050, 24 bits, 2 channels */
#define LCD_PANEL_ID_05 0x05 /* 1920x1200, 24 bits, 2 channels */
#define LCD_PANEL_ID_06 0x06 /* 1920x1080, 24 bits, 2 channels */
//Callback Sub-Function 05h – Select Boot-up TV Standard
#define TV_MODE_00 0x00 /* NTSC */
#define TV_MODE_01 0x01 /* PAL */
#define TV_MODE_02 0x02 /* PALM */
#define TV_MODE_03 0x03 /* PAL60 */
#define TV_MODE_04 0x04 /* NTSCJ */
#define TV_MODE_05 0x05 /* PALCN */
#define TV_MODE_06 0x06 /* PALN */
#define TV_MODE_09 0x09 /* SCART-RGB */
#define TV_MODE_NO 0xff /* No TV Support */
/* The base address is 0x2e or 0x4e, depending on config bytes. */
#define SIO_BASE 0x2e
#define SIO_INDEX SIO_BASE
#define SIO_DATA SIO_BASE+1
/* Global configuration registers. */
#define IT8712F_CONFIG_REG_CC 0x02 /* Configure Control (write-only). */
#define IT8712F_CONFIG_REG_LDN 0x07 /* Logical Device Number. */
#define IT8712F_CONFIG_REG_CONFIGSEL 0x22 /* Configuration Select. */
#define IT8712F_CONFIG_REG_CLOCKSEL 0x23 /* Clock Selection. */
#define IT8712F_CONFIG_REG_SWSUSP 0x24 /* Software Suspend, Flash I/F. */
#define IT8712F_CONFIG_REG_MFC 0x2a /* Multi-function control */
#define IT8712F_CONFIG_REG_WATCHDOG 0x72 /* Watchdog control. */
#define IT8712F_CONFIGURATION_PORT 0x2e /* Write-only. */
#define IT8712F_SIMPLE_IO_BASE 0x200 /* Simple I/O base address */
extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address);
extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address,
u8 val);
extern void lb_add_memory_range(struct lb_memory *mem, uint32_t type,
uint64_t start, uint64_t size);
#define ADT7461_read_byte(address) \
do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address)
#define ARA_read_byte(address) \
do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address)
#define ADT7461_write_byte(address, val) \
do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val)
/* previous
*/
void tim5690_enable(device_t dev);
int add_mainboard_resources(struct lb_memory *mem);
uint64_t uma_memory_base, uma_memory_size;
/* The content of IT8712F_CONFIG_REG_LDN (index 0x07) must be set to the
LDN the register belongs to, before you can access the register. */
static void it8712f_sio_write(uint8_t ldn, uint8_t index, uint8_t value)
{
outb(IT8712F_CONFIG_REG_LDN, SIO_BASE);
outb(ldn, SIO_DATA);
outb(index, SIO_BASE);
outb(value, SIO_DATA);
}
static void it8712f_enter_conf(void)
{
/* Enter the configuration state (MB PnP mode). */
/* Perform MB PnP setup to put the SIO chip at 0x2e. */
/* Base address 0x2e: 0x87 0x01 0x55 0x55. */
/* Base address 0x4e: 0x87 0x01 0x55 0xaa. */
outb(0x87, IT8712F_CONFIGURATION_PORT);
outb(0x01, IT8712F_CONFIGURATION_PORT);
outb(0x55, IT8712F_CONFIGURATION_PORT);
outb(0x55, IT8712F_CONFIGURATION_PORT);
}
static void it8712f_exit_conf(void)
{
/* Exit the configuration state (MB PnP mode). */
it8712f_sio_write(0x00, IT8712F_CONFIG_REG_CC, 0x02);
}
/* set thermal config
*/
static void set_thermal_config(void)
{
u8 byte;
u16 word;
device_t sm_dev;
/* set ADT 7461 */
ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */
ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */
ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */
ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */
ADT7461_write_byte(0x19, 0x55); /* External THERM limit */
ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */
byte = ADT7461_read_byte(0x02); /* read status register to clear it */
ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */
printk_info("Init adt7461 end , status 0x02 %02x\n", byte);
/* sb600 settings for thermal config */
/* set SB600 GPIO 64 to GPIO with pull-up */
byte = pm2_ioread(0x42);
byte &= 0x3f;
pm2_iowrite(0x42, byte);
/* set GPIO 64 to input */
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
word = pci_read_config16(sm_dev, 0x56);
word |= 1 << 7;
pci_write_config16(sm_dev, 0x56, word);
/* set GPIO 64 internal pull-up */
byte = pm2_ioread(0xf0);
byte &= 0xee;
pm2_iowrite(0xf0, byte);
/* set Talert to be active low */
byte = pm_ioread(0x67);
byte &= ~(1 << 5);
pm_iowrite(0x67, byte);
/* set Talert to generate ACPI event */
byte = pm_ioread(0x3c);
byte &= 0xf3;
pm_iowrite(0x3c, byte);
/* THERMTRIP pin */
/* byte = pm_ioread(0x68);
* byte |= 1 << 3;
* pm_iowrite(0x68, byte);
*
* byte = pm_ioread(0x55);
* byte |= 1 << 0;
* pm_iowrite(0x55, byte);
*
* byte = pm_ioread(0x67);
* byte &= ~( 1 << 6);
* pm_iowrite(0x67, byte);
*/
}
/* Mainboard specific GPIO setup. */
void mb_gpio_init(u16 *iobase)
{
/* Init Super I/O GPIOs. */
it8712f_enter_conf();
outb(IT8712F_CONFIG_REG_LDN, SIO_INDEX);
outb(IT8712F_GPIO, SIO_DATA);
outb(0x62, SIO_INDEX);
outb((*iobase >> 8), SIO_DATA);
outb(0x63, SIO_INDEX);
outb((*iobase & 0xff), SIO_DATA);
it8712f_exit_conf();
}
/* The LCD's panel id seletion. */
void lcd_panel_id(rs690_vbios_regs *vbios_regs, u8 num_id)
{
switch (num_id) {
case 0x1:
vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_01;
break;
case 0x2:
vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_02;
break;
case 0x3:
vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_03;
break;
case 0x4:
vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_04;
break;
case 0x5:
vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_05;
break;
case 0x6:
vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_06;
break;
default:
vbios_regs->int15_regs.fun00_panel_id = LCD_PANEL_ID_NO;
break;
}
}
/*************************************************
* enable the dedicated function in tim5690 board.
* This function called early than rs690_enable.
*************************************************/
void tim5690_enable(device_t dev)
{
struct mainboard_config *mainboard =
(struct mainboard_config *)dev->chip_info;
rs690_vbios_regs vbios_regs;
u16 gpio_base = IT8712F_SIMPLE_IO_BASE;
u8 port2;
printk_info("Mainboard tim5690 Enable. dev=0x%p\n", dev);
mb_gpio_init(&gpio_base);
/* The LCD's panel id seletion by switch. */
port2 = inb(gpio_base+1);
lcd_panel_id(&vbios_regs, ((~port2) & 0xf));
/* No support TV */
vbios_regs.int15_regs.fun05_tv_standard = TV_MODE_NO;
vgabios_init(&vbios_regs);
#if (CONFIG_GFXUMA == 1)
msr_t msr, msr2;
/* TOP_MEM: the top of DRAM below 4G */
msr = rdmsr(TOP_MEM);
printk_info("%s, TOP MEM: msr.lo = 0x%08x, msr.hi = 0x%08x\n",
__func__, msr.lo, msr.hi);
/* TOP_MEM2: the top of DRAM above 4G */
msr2 = rdmsr(TOP_MEM2);
printk_info("%s, TOP MEM2: msr2.lo = 0x%08x, msr2.hi = 0x%08x\n",
__func__, msr2.lo, msr2.hi);
switch (msr.lo) {
case 0x10000000: /* 256M system memory */
uma_memory_size = 0x2000000; /* 32M recommended UMA */
break;
case 0x18000000: /* 384M system memory */
uma_memory_size = 0x4000000; /* 64M recommended UMA */
break;
case 0x20000000: /* 512M system memory */
uma_memory_size = 0x4000000; /* 64M recommended UMA */
break;
default: /* 1GB and above system memory */
uma_memory_size = 0x8000000; /* 128M recommended UMA */
break;
}
uma_memory_base = msr.lo - uma_memory_size; /* TOP_MEM1 */
printk_info("%s: uma size 0x%08llx, memory start 0x%08llx\n",
__func__, uma_memory_size, uma_memory_base);
/* TODO: TOP_MEM2 */
#else
uma_memory_size = 0x8000000; /* 128M recommended UMA */
uma_memory_base = 0x38000000; /* 1GB system memory supposed */
#endif
set_thermal_config();
}
int add_mainboard_resources(struct lb_memory *mem)
{
/* UMA is removed from system memory in the northbridge code, but
* in some circumstances we want the memory mentioned as reserved.
*/
#if (CONFIG_GFXUMA == 1)
printk_info("uma_memory_base=0x%llx, uma_memory_size=0x%llx \n",
uma_memory_base, uma_memory_size);
lb_add_memory_range(mem, LB_MEM_RESERVED,
uma_memory_base, uma_memory_size);
#endif
technexion_post_code(LED_MESSAGE_FINISH);
}
struct chip_operations mainboard_ops = {
CHIP_NAME("TechNexion TIM-5690 Mainboard")
.enable_dev = tim5690_enable,
};
|
