1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2008 Advanced Micro Devices, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#include <console/console.h>
#include <device/device.h>
#include <device/pci.h>
#include <arch/io.h>
#include <cpu/x86/msr.h>
#include <cpu/amd/mtrr.h>
#include <device/pci_def.h>
#include <southbridge/amd/sb600/sb600.h>
#define ADT7461_ADDRESS 0x4C
#define ARA_ADDRESS 0x0C /* Alert Response Address */
#define SMBUS_IO_BASE 0x1000
extern int do_smbus_read_byte(u32 smbus_io_base, u32 device, u32 address);
extern int do_smbus_write_byte(u32 smbus_io_base, u32 device, u32 address,
u8 val);
#define ADT7461_read_byte(address) \
do_smbus_read_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address)
#define ARA_read_byte(address) \
do_smbus_read_byte(SMBUS_IO_BASE, ARA_ADDRESS, address)
#define ADT7461_write_byte(address, val) \
do_smbus_write_byte(SMBUS_IO_BASE, ADT7461_ADDRESS, address, val)
/***************************************************
* This board, the TIM-8690 has two Marvel 88e5056 PCI-E
* 10/100/1000 chips on board.
* Both of their pin PERSTn pins are connected to GPIO 5 of the
* SB600 southbridge.
****************************************************/
static void enable_onboard_nic(void)
{
u8 byte;
device_t sm_dev;
printk(BIOS_INFO, "enable_onboard_nic.\n");
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
byte = pci_read_config8(sm_dev, 0x9a);
byte |= ( 1 << 7);
pci_write_config8(sm_dev, 0x9a, byte);
byte=pm_ioread(0x59);
byte &= ~( 1<< 5);
pm_iowrite(0x59,byte);
byte = pci_read_config8(sm_dev, 0xA8);
byte |= (1 << 1); //set bit 1 to high
pci_write_config8(sm_dev, 0xA8, byte);
}
/* set thermal config
*/
static void set_thermal_config(void)
{
u8 byte;
u16 word;
device_t sm_dev;
/* set ADT 7461 */
ADT7461_write_byte(0x0B, 0x50); /* Local Temperature Hight limit */
ADT7461_write_byte(0x0C, 0x00); /* Local Temperature Low limit */
ADT7461_write_byte(0x0D, 0x50); /* External Temperature Hight limit High Byte */
ADT7461_write_byte(0x0E, 0x00); /* External Temperature Low limit High Byte */
ADT7461_write_byte(0x19, 0x55); /* External THERM limit */
ADT7461_write_byte(0x20, 0x55); /* Local THERM limit */
byte = ADT7461_read_byte(0x02); /* read status register to clear it */
ARA_read_byte(0x05); /* A hardware alert can only be cleared by the master sending an ARA as a read command */
printk(BIOS_INFO, "Init adt7461 end , status 0x02 %02x\n", byte);
/* sb600 settings for thermal config */
/* set SB600 GPIO 64 to GPIO with pull-up */
byte = pm2_ioread(0x42);
byte &= 0x3f;
pm2_iowrite(0x42, byte);
/* set GPIO 64 to input */
sm_dev = dev_find_slot(0, PCI_DEVFN(0x14, 0));
word = pci_read_config16(sm_dev, 0x56);
word |= 1 << 7;
pci_write_config16(sm_dev, 0x56, word);
/* set GPIO 64 internal pull-up */
byte = pm2_ioread(0xf0);
byte &= 0xee;
pm2_iowrite(0xf0, byte);
/* set Talert to be active low */
byte = pm_ioread(0x67);
byte &= ~(1 << 5);
pm_iowrite(0x67, byte);
/* set Talert to generate ACPI event */
byte = pm_ioread(0x3c);
byte &= 0xf3;
pm_iowrite(0x3c, byte);
/* THERMTRIP pin */
/* byte = pm_ioread(0x68);
* byte |= 1 << 3;
* pm_iowrite(0x68, byte);
*
* byte = pm_ioread(0x55);
* byte |= 1 << 0;
* pm_iowrite(0x55, byte);
*
* byte = pm_ioread(0x67);
* byte &= ~( 1 << 6);
* pm_iowrite(0x67, byte);
*/
}
/*************************************************
* enable the dedicated function in tim8690 board.
* This function called early than rs690_enable.
*************************************************/
static void mainboard_enable(device_t dev)
{
printk(BIOS_INFO, "Mainboard tim8690 Enable. dev=0x%p\n", dev);
enable_onboard_nic();
set_thermal_config();
}
struct chip_operations mainboard_ops = {
.enable_dev = mainboard_enable,
};
|
