1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
|
#define ASSEMBLY 1
#define MAXIMUM_CONSOLE_LOGLEVEL 6
#define DEFAULT_CONSOLE_LOGLEVEL 6
#include <stdint.h>
#include <device/pci_def.h>
#include <cpu/p6/apic.h>
#include <arch/io.h>
#include <device/pnp.h>
#include <arch/romcc_io.h>
#include "pc80/serial.c"
#include "arch/i386/lib/console.c"
#include "ram/ramtest.c"
#include "northbridge/via/vt8601/raminit.h"
#include "cpu/p6/earlymtrr.c"
/*
*/
void udelay(int usecs)
{
int i;
for(i = 0; i < usecs; i++)
outb(i&0xff, 0x80);
}
#include "lib/delay.c"
#include "cpu/p6/boot_cpu.c"
#include "debug.c"
#include "southbridge/via/vt8231/vt8231_early_smbus.c"
#include "southbridge/via/vt8231/vt8231_early_serial.c"
static void memreset_setup(void)
{
}
/*
static void memreset(int controllers, const struct mem_controller *ctrl)
{
}
*/
static inline int spd_read_byte(unsigned device, unsigned address)
{
unsigned char c;
c = smbus_read_byte(device, address);
return c;
}
#include "northbridge/via/vt8601/raminit.c"
/*
#include "sdram/generic_sdram.c"
*/
static void enable_mainboard_devices(void)
{
device_t dev;
/* dev 0 for southbridge */
dev = pci_locate_device(PCI_ID(0x1106,0x8231), 0);
if (dev == PCI_DEV_INVALID) {
die("Southbridge not found!!!\n");
}
pci_write_config8(dev, 0x50, 7);
pci_write_config8(dev, 0x51, 0xff);
#if 0
// This early setup switches IDE into compatibility mode before PCI gets
// // a chance to assign I/Os
// movl $CONFIG_ADDR(0, 0x89, 0x42), %eax
// // movb $0x09, %dl
// movb $0x00, %dl
// PCI_WRITE_CONFIG_BYTE
//
#endif
/* we do this here as in V2, we can not yet do raw operations
* to pci!
*/
dev += 0x100; /* ICKY */
pci_write_config8(dev, 0x42, 0);
}
static void enable_shadow_ram(void)
{
device_t dev = 0; /* no need to look up 0:0.0 */
unsigned char shadowreg;
/* dev 0 for southbridge */
shadowreg = pci_read_config8(dev, 0x63);
/* 0xf0000-0xfffff */
shadowreg |= 0x30;
pci_write_config8(dev, 0x63, shadowreg);
}
static void main(void)
{
unsigned long x;
/* init_timer();*/
outb(5, 0x80);
enable_vt8231_serial();
uart_init();
console_init();
enable_mainboard_devices();
enable_smbus();
enable_shadow_ram();
/*
memreset_setup();
this is way more generic than we need.
sdram_initialize(sizeof(cpu)/sizeof(cpu[0]), cpu);
*/
sdram_set_registers((const struct mem_controller *) 0);
sdram_set_spd_registers((const struct mem_controller *) 0);
sdram_enable(0, (const struct mem_controller *) 0);
/* Check all of memory */
#if 0
ram_check(0x00000000, msr.lo);
#endif
#if 0
static const struct {
unsigned long lo, hi;
} check_addrs[] = {
/* Check 16MB of memory @ 0*/
{ 0x00000000, 0x01000000 },
#if TOTAL_CPUS > 1
/* Check 16MB of memory @ 2GB */
{ 0x80000000, 0x81000000 },
#endif
};
int i;
for(i = 0; i < sizeof(check_addrs)/sizeof(check_addrs[0]); i++) {
ram_check(check_addrs[i].lo, check_addrs[i].hi);
}
#endif
early_mtrr_init();
}
|
