1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
|
/*
* This file is part of the coreboot project.
*
* Copyright (C) 2005 - 2008 Advanced Micro Devices, Inc.
* Copyright (C) 2007 coresystems GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
// 2005.9 yhlu serengeti support
// 2005.9 yhlu modify that to more dynamic for AMD Opteron Based MB
// 2007.9 stepan improve code documentation
#include <console/console.h>
#include <device/pci.h>
#include <device/pci_ids.h>
#include <string.h>
#include <stdint.h>
#include <cpu/amd/amdk8_sysconf.h>
#if 0
unsigned node_link_to_bus(unsigned node, unsigned link)
{
device_t dev;
unsigned reg;
dev = dev_find_slot(0, PCI_DEVFN(0x18, 1));
if (!dev) {
return 0;
}
for(reg = 0xE0; reg < 0xF0; reg += 0x04) {
uint32_t config_map;
unsigned dst_node;
unsigned dst_link;
unsigned bus_base;
config_map = pci_read_config32(dev, reg);
if ((config_map & 3) != 3) {
continue;
}
dst_node = (config_map >> 4) & 7;
dst_link = (config_map >> 8) & 3;
bus_base = (config_map >> 16) & 0xff;
#if 0
printk_debug("node.link=bus: %d.%d=%d 0x%2x->0x%08x\n",
dst_node, dst_link, bus_base,
reg, config_map);
#endif
if ((dst_node == node) && (dst_link == link))
{
return bus_base;
}
}
return 0;
}
#endif
/**
* Why we need the pci1234[] array
*
* It will keep the sequence of HT devices in the HT link registers even when a
* given HT I/O card is not installed.
*
* The final result for pci1234[] will be
*
* pci1234[0] will record the south bridge link and bus range
* pci1234[i] will record HT chain i.
*
* For example, on the Tyan S2885 coreboot_ram will put the AMD8151 chain (HT
* link 0) into the register 0xE0, and the AMD8131/8111 HT chain into the
* register 0xE4.
*
* So we need to make sure that the south bridge link will always be on
* pci1234[0].
*
* Imagine a scenario with multiple HT I/O cards, where you don't install HT I/O 1,
* but you only install HT I/O 2 and HT I/O 3. The HT I/Os will end up in registers
* 0xE4 and 0xE8.
*
* But we want to leave pci1234[1] to HT I/O 1 (even though it is disabled),
* and let HT I/O 2 and HT I/O 3 still use pci1234[2] and pci1234[3].
*
* So we keep the sequence. You need to preset the pci1234[1], pci1234[2],
* pci1234[3] for this purpose.
*
* For this example you need to set
*
* unsigned pci1234[] = {
* 0x0000ff0,
* 0x0000f10, // HT IO 1 card always on node 1
* 0x0000f20, // HT IO 2 card always on node 2
* 0x0000f30 // HT IO 3 card always on node 3
* };
*
* For 2P + htio(n1) + htio(n0_1) + htio(n1_1), 2P + htio(n1) + 2P + htio(n2) + htio(n3):
* You need an array pci1234[6]:
*
* unsigned pci1234[] = {
* 0x0000ff0,
* 0x0000010, // HT IO 1 card always on node 1
* 0x0000f00, // HT IO 2 card always on node 0
* 0x0000110, // HT IO 3 card always on node 1
* 0x0000f20, // HT IO 4 card always on node 2
* 0x0000f30 // HT IO 5 card always on node 3
* };
*
*
* For 4p+htio(n1)+htio(n2)+htio(n3),4p+htio(n1)+4p+htio(n6)+htio(n7):
* You need an array pci1234[6]:
*
* unsigned pci1234[] = {
* 0x0000ff0,
* 0x0000f10, // HT IO 1 card always on node 1
* 0x0000f20, // HT IO 2 card always on node 2
* 0x0000f30, // HT IO 3 card always on node 3
* 0x0000f60, // HT IO 4 card always on node 6
* 0x0000f70 // HT IO 5 card always on node 7
* };
*
*
* For 2p + htio(n1) + htio(n0_1) + htio(n1_1), 2P + htio(n1) + 2P +
* htio(n2) + htio(n3), 2P + htio(n1) + 4P + htio(n4) + htio(n5),
* you need an array pci1234[8]:
*
* unsigned pci1234[] = {
* 0x0000ff0,
* 0x0000010, // HT IO 1 card always on node 1
* 0x0000f00, // HT IO 2 card always on node 0
* 0x0000110, // HT IO 3 card always on node 1
* 0x0000f20, // HT IO 4 card always on node 2
* 0x0000f30 // HT IO 5 card always on node 3
* 0x0000f40, // HT IO 6 card always on node 4
* 0x0000f50 // HT IO 7 card always on node 5
* };
*
*
* For 4P + htio(n1) + htio(n2) + htio(n3), 4p + htio(n1) + 2p + htio(n4) +
* htio(n5), 4p + htio(n1) + 4p + htio(n6) + htio(n7),
* you need an array pci1234[8]:
*
* unsigned pci1234[] = {
* 0x0000ff0,
* 0x0000f10, // HT IO 1 card always on node 1
* 0x0000f20, // HT IO 2 card always on node 2
* 0x0000f30, // HT IO 3 card always on node 3
* 0x0000f40, // HT IO 4 card always on node 4
* 0x0000f50 // HT IO 5 card always on node 5
* 0x0000f60, // HT IO 6 card always on node 6
* 0x0000f70 // HT IO 7 card always on node 7
* };
*
*
* So the maximum posible value of HC_POSSIBLE_NUM is 8. (FIXME Why?)
*
* 1n: 3
* 2n: 2x2 - 1
* 4n: 1x4 - 2
* 6n: 2
* 8n: 2
* Total: 12
*
* Just put all the possible HT Node/link to the list tp pci1234[] in
* src/mainboard/<vendor>/<mainboard>get_bus_conf.c
*
* Also don't forget to increase the ACPI_SSDTX_NUM etc (FIXME what else) if
* you have too many SSDTs
*
* What about co-processor in socket 1 on a 2 way system? Or socket 2 and
* socket 3 on a 4 way system? Treat that as an HC, too!
*
*/
void get_sblk_pci1234(void)
{
device_t dev;
int i,j;
uint32_t dword;
/* read PCI_DEV(0,0x18,0) 0x64 bit [8:9] to find out SbLink m */
dev = dev_find_slot(0, PCI_DEVFN(0x18,0));
dword = pci_read_config32(dev, 0x64);
sysconf.sblk = (dword>>8) & 0x3;
dword &=0x0300;
dword |= 1;
sysconf.pci1234[0] = dword;
sysconf.hcid[0] = 0;
/* About hardcoded numbering for HT_IO support
*
* Set the node_id and link_id that could have a HT chain in the one
* array, (FIXME: which one?) then check if is enabled. Then update
* final value
*/
/* Here we need to set hcdn
*
* 1. hypertransport.c needs to record hcdn_reg together with 0xe0,
* 0xe4, 0xe8, 0xec when are set (FIXME: when WHAT is set?)
*
* 2. So at the same time we need update hcdn with hcdn_reg here. FIXME: Why?
*/
dev = dev_find_slot(0, PCI_DEVFN(0x18, 1));
for(j=0;j<4;j++) {
uint32_t dwordx;
dwordx = pci_read_config32(dev, 0xe0 + j*4);
dwordx &=0xffff0ff1; /* keep bus num, node_id, link_num, enable bits */
if((dwordx & 0xff1) == dword) { /* SBLINK */
sysconf.pci1234[0] = dwordx;
sysconf.hcdn[0] = sysconf.hcdn_reg[j];
continue;
}
if((dwordx & 1) == 1) {
/* We need to find out the number of HC
* for exact match
*/
for(i=1;i<sysconf.hc_possible_num;i++) {
if((dwordx & 0xff0) == (sysconf.pci1234[i] & 0xff0)) {
sysconf.pci1234[i] = dwordx;
sysconf.hcdn[i] = sysconf.hcdn_reg[j];
break;
}
}
/* For 0xff0 match or same node */
for(i=1;i<sysconf.hc_possible_num;i++) {
if((dwordx & 0xff0) == (dwordx & sysconf.pci1234[i] & 0xff0)) {
sysconf.pci1234[i] = dwordx;
sysconf.hcdn[i] = sysconf.hcdn_reg[j];
break;
}
}
}
}
for(i=1;i<sysconf.hc_possible_num;i++) {
if((sysconf.pci1234[i] & 1) != 1) {
sysconf.pci1234[i] = 0;
sysconf.hcdn[i] = 0x20202020;
}
sysconf.hcid[i] = 0;
}
}
|