summaryrefslogtreecommitdiff
path: root/src/northbridge/amd/amdk8/raminit_f.c
blob: 3135bcedb95afdadc63d8b5d75fafdf3508432c7 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
1294
1295
1296
1297
1298
1299
1300
1301
1302
1303
1304
1305
1306
1307
1308
1309
1310
1311
1312
1313
1314
1315
1316
1317
1318
1319
1320
1321
1322
1323
1324
1325
1326
1327
1328
1329
1330
1331
1332
1333
1334
1335
1336
1337
1338
1339
1340
1341
1342
1343
1344
1345
1346
1347
1348
1349
1350
1351
1352
1353
1354
1355
1356
1357
1358
1359
1360
1361
1362
1363
1364
1365
1366
1367
1368
1369
1370
1371
1372
1373
1374
1375
1376
1377
1378
1379
1380
1381
1382
1383
1384
1385
1386
1387
1388
1389
1390
1391
1392
1393
1394
1395
1396
1397
1398
1399
1400
1401
1402
1403
1404
1405
1406
1407
1408
1409
1410
1411
1412
1413
1414
1415
1416
1417
1418
1419
1420
1421
1422
1423
1424
1425
1426
1427
1428
1429
1430
1431
1432
1433
1434
1435
1436
1437
1438
1439
1440
1441
1442
1443
1444
1445
1446
1447
1448
1449
1450
1451
1452
1453
1454
1455
1456
1457
1458
1459
1460
1461
1462
1463
1464
1465
1466
1467
1468
1469
1470
1471
1472
1473
1474
1475
1476
1477
1478
1479
1480
1481
1482
1483
1484
1485
1486
1487
1488
1489
1490
1491
1492
1493
1494
1495
1496
1497
1498
1499
1500
1501
1502
1503
1504
1505
1506
1507
1508
1509
1510
1511
1512
1513
1514
1515
1516
1517
1518
1519
1520
1521
1522
1523
1524
1525
1526
1527
1528
1529
1530
1531
1532
1533
1534
1535
1536
1537
1538
1539
1540
1541
1542
1543
1544
1545
1546
1547
1548
1549
1550
1551
1552
1553
1554
1555
1556
1557
1558
1559
1560
1561
1562
1563
1564
1565
1566
1567
1568
1569
1570
1571
1572
1573
1574
1575
1576
1577
1578
1579
1580
1581
1582
1583
1584
1585
1586
1587
1588
1589
1590
1591
1592
1593
1594
1595
1596
1597
1598
1599
1600
1601
1602
1603
1604
1605
1606
1607
1608
1609
1610
1611
1612
1613
1614
1615
1616
1617
1618
1619
1620
1621
1622
1623
1624
1625
1626
1627
1628
1629
1630
1631
1632
1633
1634
1635
1636
1637
1638
1639
1640
1641
1642
1643
1644
1645
1646
1647
1648
1649
1650
1651
1652
1653
1654
1655
1656
1657
1658
1659
1660
1661
1662
1663
1664
1665
1666
1667
1668
1669
1670
1671
1672
1673
1674
1675
1676
1677
1678
1679
1680
1681
1682
1683
1684
1685
1686
1687
1688
1689
1690
1691
1692
1693
1694
1695
1696
1697
1698
1699
1700
1701
1702
1703
1704
1705
1706
1707
1708
1709
1710
1711
1712
1713
1714
1715
1716
1717
1718
1719
1720
1721
1722
1723
1724
1725
1726
1727
1728
1729
1730
1731
1732
1733
1734
1735
1736
1737
1738
1739
1740
1741
1742
1743
1744
1745
1746
1747
1748
1749
1750
1751
1752
1753
1754
1755
1756
1757
1758
1759
1760
1761
1762
1763
1764
1765
1766
1767
1768
1769
1770
1771
1772
1773
1774
1775
1776
1777
1778
1779
1780
1781
1782
1783
1784
1785
1786
1787
1788
1789
1790
1791
1792
1793
1794
1795
1796
1797
1798
1799
1800
1801
1802
1803
1804
1805
1806
1807
1808
1809
1810
1811
1812
1813
1814
1815
1816
1817
1818
1819
1820
1821
1822
1823
1824
1825
1826
1827
1828
1829
1830
1831
1832
1833
1834
1835
1836
1837
1838
1839
1840
1841
1842
1843
1844
1845
1846
1847
1848
1849
1850
1851
1852
1853
1854
1855
1856
1857
1858
1859
1860
1861
1862
1863
1864
1865
1866
1867
1868
1869
1870
1871
1872
1873
1874
1875
1876
1877
1878
1879
1880
1881
1882
1883
1884
1885
1886
1887
1888
1889
1890
1891
1892
1893
1894
1895
1896
1897
1898
1899
1900
1901
1902
1903
1904
1905
1906
1907
1908
1909
1910
1911
1912
1913
1914
1915
1916
1917
1918
1919
1920
1921
1922
1923
1924
1925
1926
1927
1928
1929
1930
1931
1932
1933
1934
1935
1936
1937
1938
1939
1940
1941
1942
1943
1944
1945
1946
1947
1948
1949
1950
1951
1952
1953
1954
1955
1956
1957
1958
1959
1960
1961
1962
1963
1964
1965
1966
1967
1968
1969
1970
1971
1972
1973
1974
1975
1976
1977
1978
1979
1980
1981
1982
1983
1984
1985
1986
1987
1988
1989
1990
1991
1992
1993
1994
1995
1996
1997
1998
1999
2000
2001
2002
2003
2004
2005
2006
2007
2008
2009
2010
2011
2012
2013
2014
2015
2016
2017
2018
2019
2020
2021
2022
2023
2024
2025
2026
2027
2028
2029
2030
2031
2032
2033
2034
2035
2036
2037
2038
2039
2040
2041
2042
2043
2044
2045
2046
2047
2048
2049
2050
2051
2052
2053
2054
2055
2056
2057
2058
2059
2060
2061
2062
2063
2064
2065
2066
2067
2068
2069
2070
2071
2072
2073
2074
2075
2076
2077
2078
2079
2080
2081
2082
2083
2084
2085
2086
2087
2088
2089
2090
2091
2092
2093
2094
2095
2096
2097
2098
2099
2100
2101
2102
2103
2104
2105
2106
2107
2108
2109
2110
2111
2112
2113
2114
2115
2116
2117
2118
2119
2120
2121
2122
2123
2124
2125
2126
2127
2128
2129
2130
2131
2132
2133
2134
2135
2136
2137
2138
2139
2140
2141
2142
2143
2144
2145
2146
2147
2148
2149
2150
2151
2152
2153
2154
2155
2156
2157
2158
2159
2160
2161
2162
2163
2164
2165
2166
2167
2168
2169
2170
2171
2172
2173
2174
2175
2176
2177
2178
2179
2180
2181
2182
2183
2184
2185
2186
2187
2188
2189
2190
2191
2192
2193
2194
2195
2196
2197
2198
2199
2200
2201
2202
2203
2204
2205
2206
2207
2208
2209
2210
2211
2212
2213
2214
2215
2216
2217
2218
2219
2220
2221
2222
2223
2224
2225
2226
2227
2228
2229
2230
2231
2232
2233
2234
2235
2236
2237
2238
2239
2240
2241
2242
2243
2244
2245
2246
2247
2248
2249
2250
2251
2252
2253
2254
2255
2256
2257
2258
2259
2260
2261
2262
2263
2264
2265
2266
2267
2268
2269
2270
2271
2272
2273
2274
2275
2276
2277
2278
2279
2280
2281
2282
2283
2284
2285
2286
2287
2288
2289
2290
2291
2292
2293
2294
2295
2296
2297
2298
2299
2300
2301
2302
2303
2304
2305
2306
2307
2308
2309
2310
2311
2312
2313
2314
2315
2316
2317
2318
2319
2320
2321
2322
2323
2324
2325
2326
2327
2328
2329
2330
2331
2332
2333
2334
2335
2336
2337
2338
2339
2340
2341
2342
2343
2344
2345
2346
2347
2348
2349
2350
2351
2352
2353
2354
2355
2356
2357
2358
2359
2360
2361
2362
2363
2364
2365
2366
2367
2368
2369
2370
2371
2372
2373
2374
2375
2376
2377
2378
2379
2380
2381
2382
2383
2384
2385
2386
2387
2388
2389
2390
2391
2392
2393
2394
2395
2396
2397
2398
2399
2400
2401
2402
2403
2404
2405
2406
2407
2408
2409
2410
2411
2412
2413
2414
2415
2416
2417
2418
2419
2420
2421
2422
2423
2424
2425
2426
2427
2428
2429
2430
2431
2432
2433
2434
2435
2436
2437
2438
2439
2440
2441
2442
2443
2444
2445
2446
2447
2448
2449
2450
2451
2452
2453
2454
2455
2456
2457
2458
2459
2460
2461
2462
2463
2464
2465
2466
2467
2468
2469
2470
2471
2472
2473
2474
2475
2476
2477
2478
2479
2480
2481
2482
2483
2484
2485
2486
2487
2488
2489
2490
2491
2492
2493
2494
2495
2496
2497
2498
2499
2500
2501
2502
2503
2504
2505
2506
2507
2508
2509
2510
2511
2512
2513
2514
2515
2516
2517
2518
2519
2520
2521
2522
2523
2524
2525
2526
2527
2528
2529
2530
2531
2532
2533
2534
2535
2536
2537
2538
2539
2540
2541
2542
2543
2544
2545
2546
2547
2548
2549
2550
2551
2552
2553
2554
2555
2556
2557
2558
2559
2560
2561
2562
2563
2564
2565
2566
2567
2568
2569
2570
2571
2572
2573
2574
2575
2576
2577
2578
2579
2580
2581
2582
2583
2584
2585
2586
2587
2588
2589
2590
2591
2592
2593
2594
2595
2596
2597
2598
2599
2600
2601
2602
2603
2604
2605
2606
2607
2608
2609
2610
2611
2612
2613
2614
2615
2616
2617
2618
2619
2620
2621
2622
2623
2624
2625
2626
2627
2628
2629
2630
2631
2632
2633
2634
2635
2636
2637
2638
2639
2640
2641
2642
2643
2644
2645
2646
2647
2648
2649
2650
2651
2652
2653
2654
2655
2656
2657
2658
2659
2660
2661
2662
2663
2664
2665
2666
2667
2668
2669
2670
2671
2672
2673
2674
2675
2676
2677
2678
2679
2680
2681
2682
2683
2684
2685
2686
2687
2688
2689
2690
2691
2692
2693
2694
2695
2696
2697
2698
2699
2700
2701
2702
2703
2704
2705
2706
2707
2708
2709
2710
2711
2712
2713
2714
2715
2716
2717
2718
2719
2720
2721
2722
2723
2724
2725
2726
2727
2728
2729
2730
2731
2732
2733
2734
2735
2736
2737
2738
2739
2740
2741
2742
2743
2744
2745
2746
2747
2748
2749
2750
2751
2752
2753
2754
2755
2756
2757
2758
2759
2760
2761
2762
2763
2764
2765
2766
2767
2768
2769
2770
2771
2772
2773
2774
2775
2776
2777
2778
2779
2780
2781
2782
2783
2784
2785
2786
2787
2788
2789
2790
2791
2792
2793
2794
2795
2796
2797
2798
2799
2800
2801
2802
2803
2804
2805
2806
2807
2808
2809
2810
2811
2812
2813
2814
2815
2816
2817
2818
2819
2820
2821
2822
2823
2824
2825
2826
2827
2828
2829
2830
2831
2832
2833
2834
2835
2836
2837
2838
2839
2840
2841
2842
2843
2844
2845
2846
2847
2848
2849
2850
2851
2852
2853
2854
2855
2856
2857
2858
2859
2860
2861
2862
2863
2864
2865
2866
2867
2868
2869
2870
2871
2872
2873
2874
2875
2876
2877
2878
2879
2880
2881
2882
2883
2884
2885
2886
2887
2888
2889
2890
2891
2892
2893
2894
2895
2896
2897
2898
2899
2900
2901
2902
2903
2904
2905
2906
2907
2908
2909
2910
2911
2912
2913
2914
2915
2916
2917
2918
2919
2920
2921
2922
2923
2924
2925
2926
2927
2928
2929
2930
2931
2932
2933
2934
2935
2936
2937
2938
2939
2940
2941
2942
2943
2944
2945
2946
2947
2948
2949
2950
2951
2952
2953
2954
2955
2956
2957
2958
2959
2960
2961
2962
2963
2964
2965
2966
2967
2968
2969
2970
2971
2972
2973
2974
2975
2976
2977
2978
2979
2980
2981
2982
2983
2984
2985
2986
2987
2988
2989
2990
2991
2992
2993
2994
2995
2996
2997
2998
2999
3000
3001
3002
3003
3004
3005
3006
3007
3008
3009
3010
3011
3012
3013
3014
3015
3016
3017
3018
3019
3020
3021
3022
3023
3024
3025
3026
3027
3028
3029
3030
3031
3032
3033
3034
3035
3036
3037
3038
3039
3040
3041
3042
3043
3044
3045
3046
3047
3048
3049
3050
3051
3052
3053
3054
3055
3056
3057
3058
3059
3060
3061
3062
3063
3064
3065
3066
3067
3068
3069
3070
3071
3072
3073
3074
3075
3076
3077
3078
3079
3080
3081
3082
3083
3084
3085
3086
3087
3088
3089
3090
3091
3092
3093
3094
3095
3096
3097
3098
3099
3100
3101
3102
3103
3104
3105
3106
3107
3108
3109
3110
3111
3112
3113
3114
3115
3116
3117
3118
3119
3120
3121
3122
3123
3124
3125
3126
3127
3128
3129
3130
3131
3132
3133
3134
3135
3136
3137
3138
3139
3140
3141
3142
3143
3144
3145
3146
3147
3148
3149
3150
3151
3152
3153
3154
3155
3156
3157
3158
3159
3160
3161
3162
3163
3164
3165
3166
3167
3168
3169
3170
3171
3172
3173
3174
3175
3176
3177
3178
3179
3180
3181
3182
3183
3184
3185
3186
3187
3188
3189
3190
3191
3192
3193
3194
3195
3196
3197
3198
3199
3200
3201
3202
3203
3204
3205
3206
3207
3208
3209
3210
3211
3212
3213
3214
3215
3216
3217
3218
3219
3220
3221
3222
3223
3224
3225
3226
3227
3228
3229
3230
/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2002 Linux Networx
 * (Written by Eric Biederman <ebiederman@lnxi.com> for Linux Networx)
 * Copyright (C) 2004 YingHai Lu
 * Copyright (C) 2008 Advanced Micro Devices, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
*/

#include <cpu/x86/cache.h>
#include <cpu/x86/mtrr.h>
#include <cpu/x86/tsc.h>

#include <stdlib.h>
#include "raminit.h"
#include "f.h"
#include <spd_ddr2.h>
#if CONFIG_HAVE_OPTION_TABLE
#include "option_table.h"
#endif

#if CONFIG_DEBUG_RAM_SETUP
#define printk_raminit(args...) printk(BIOS_DEBUG, args)
#else
#define printk_raminit(args...)
#endif


#if (CONFIG_RAMTOP & (CONFIG_RAMTOP -1)) != 0
# error "CONFIG_RAMTOP must be a power of 2"
#endif

#include "f_pci.c"


	/* for PCI_ADDR(0, 0x18, 2, 0x98) index,
	 and PCI_ADDR(0x, 0x18, 2, 0x9c) data */
	/*
		index:
		[29: 0] DctOffset (Dram Controller Offset)
		[30:30] DctAccessWrite (Dram Controller Read/Write Select)
			0 = read access
			1 = write access
		[31:31] DctAccessDone (Dram Controller Access Done)
			0 = Access in progress
			1 = No access is progress

		Data:
		[31: 0] DctOffsetData (Dram Controller Offset Data)

		Read:
			- Write the register num to DctOffset with
			  DctAccessWrite = 0
			- poll the DctAccessDone until it = 1
			- Read the data from DctOffsetData
		Write:
			- Write the data to DctOffsetData
			- Write register num to DctOffset with DctAccessWrite = 1
			- poll the DctAccessDone untio it = 1
	*/


void setup_resource_map(const unsigned int *register_values, int max)
{
	int i;
	for (i = 0; i < max; i += 3) {
		device_t dev;
		unsigned where;
		unsigned long reg;
		dev = register_values[i] & ~0xff;
		where = register_values[i] & 0xff;
		reg = pci_read_config32(dev, where);
		reg &= register_values[i+1];
		reg |= register_values[i+2];
		pci_write_config32(dev, where, reg);
	}
}

static int controller_present(const struct mem_controller *ctrl)
{
	return pci_read_config32(ctrl->f0, 0) == 0x11001022;
}

static void sdram_set_registers(const struct mem_controller *ctrl, struct sys_info *sysinfo)
{
	static const unsigned int register_values[] = {

	/* Careful set limit registers before base registers which
	   contain the enables */
	/* DRAM Limit i Registers
	 * F1:0x44 i = 0
	 * F1:0x4C i = 1
	 * F1:0x54 i = 2
	 * F1:0x5C i = 3
	 * F1:0x64 i = 4
	 * F1:0x6C i = 5
	 * F1:0x74 i = 6
	 * F1:0x7C i = 7
	 * [ 2: 0] Destination Node ID
	 *	   000 = Node 0
	 *	   001 = Node 1
	 *	   010 = Node 2
	 *	   011 = Node 3
	 *	   100 = Node 4
	 *	   101 = Node 5
	 *	   110 = Node 6
	 *	   111 = Node 7
	 * [ 7: 3] Reserved
	 * [10: 8] Interleave select
	 *	   specifies the values of A[14:12] to use with interleave enable.
	 * [15:11] Reserved
	 * [31:16] DRAM Limit Address i Bits 39-24
	 *	   This field defines the upper address bits of a 40 bit  address
	 *	   that define the end of the DRAM region.
	 */
	PCI_ADDR(0, 0x18, 1, 0x44), 0x0000f8f8, 0x00000000,
	PCI_ADDR(0, 0x18, 1, 0x4C), 0x0000f8f8, 0x00000001,
	PCI_ADDR(0, 0x18, 1, 0x54), 0x0000f8f8, 0x00000002,
	PCI_ADDR(0, 0x18, 1, 0x5C), 0x0000f8f8, 0x00000003,
	PCI_ADDR(0, 0x18, 1, 0x64), 0x0000f8f8, 0x00000004,
	PCI_ADDR(0, 0x18, 1, 0x6C), 0x0000f8f8, 0x00000005,
	PCI_ADDR(0, 0x18, 1, 0x74), 0x0000f8f8, 0x00000006,
	PCI_ADDR(0, 0x18, 1, 0x7C), 0x0000f8f8, 0x00000007,
	/* DRAM Base i Registers
	 * F1:0x40 i = 0
	 * F1:0x48 i = 1
	 * F1:0x50 i = 2
	 * F1:0x58 i = 3
	 * F1:0x60 i = 4
	 * F1:0x68 i = 5
	 * F1:0x70 i = 6
	 * F1:0x78 i = 7
	 * [ 0: 0] Read Enable
	 *	   0 = Reads Disabled
	 *	   1 = Reads Enabled
	 * [ 1: 1] Write Enable
	 *	   0 = Writes Disabled
	 *	   1 = Writes Enabled
	 * [ 7: 2] Reserved
	 * [10: 8] Interleave Enable
	 *	   000 = No interleave
	 *	   001 = Interleave on A[12] (2 nodes)
	 *	   010 = reserved
	 *	   011 = Interleave on A[12] and A[14] (4 nodes)
	 *	   100 = reserved
	 *	   101 = reserved
	 *	   110 = reserved
	 *	   111 = Interleve on A[12] and A[13] and A[14] (8 nodes)
	 * [15:11] Reserved
	 * [13:16] DRAM Base Address i Bits 39-24
	 *	   This field defines the upper address bits of a 40-bit address
	 *	   that define the start of the DRAM region.
	 */
	PCI_ADDR(0, 0x18, 1, 0x40), 0x0000f8fc, 0x00000000,
	PCI_ADDR(0, 0x18, 1, 0x48), 0x0000f8fc, 0x00000000,
	PCI_ADDR(0, 0x18, 1, 0x50), 0x0000f8fc, 0x00000000,
	PCI_ADDR(0, 0x18, 1, 0x58), 0x0000f8fc, 0x00000000,
	PCI_ADDR(0, 0x18, 1, 0x60), 0x0000f8fc, 0x00000000,
	PCI_ADDR(0, 0x18, 1, 0x68), 0x0000f8fc, 0x00000000,
	PCI_ADDR(0, 0x18, 1, 0x70), 0x0000f8fc, 0x00000000,
	PCI_ADDR(0, 0x18, 1, 0x78), 0x0000f8fc, 0x00000000,

	/* DRAM CS Base Address i Registers
	 * F2:0x40 i = 0
	 * F2:0x44 i = 1
	 * F2:0x48 i = 2
	 * F2:0x4C i = 3
	 * F2:0x50 i = 4
	 * F2:0x54 i = 5
	 * F2:0x58 i = 6
	 * F2:0x5C i = 7
	 * [ 0: 0] Chip-Select Bank Enable
	 *	   0 = Bank Disabled
	 *	   1 = Bank Enabled
	 * [ 1: 1] Spare Rank
	 * [ 2: 2] Memory Test Failed
	 * [ 4: 3] Reserved
	 * [13: 5] Base Address (21-13)
	 *	   An optimization used when all DIMM are the same size...
	 * [18:14] Reserved
	 * [28:19] Base Address (36-27)
	 *	   This field defines the top 11 addresses bit of a 40-bit
	 *	   address that define the memory address space.  These
	 *	   bits decode 32-MByte blocks of memory.
	 * [31:29] Reserved
	 */
	PCI_ADDR(0, 0x18, 2, 0x40), 0xe007c018, 0x00000000,
	PCI_ADDR(0, 0x18, 2, 0x44), 0xe007c018, 0x00000000,
	PCI_ADDR(0, 0x18, 2, 0x48), 0xe007c018, 0x00000000,
	PCI_ADDR(0, 0x18, 2, 0x4C), 0xe007c018, 0x00000000,
	PCI_ADDR(0, 0x18, 2, 0x50), 0xe007c018, 0x00000000,
	PCI_ADDR(0, 0x18, 2, 0x54), 0xe007c018, 0x00000000,
	PCI_ADDR(0, 0x18, 2, 0x58), 0xe007c018, 0x00000000,
	PCI_ADDR(0, 0x18, 2, 0x5C), 0xe007c018, 0x00000000,
	/* DRAM CS Mask Address i Registers
	 * F2:0x60 i = 0,1
	 * F2:0x64 i = 2,3
	 * F2:0x68 i = 4,5
	 * F2:0x6C i = 6,7
	 * Select bits to exclude from comparison with the DRAM Base address register.
	 * [ 4: 0] Reserved
	 * [13: 5] Address Mask (21-13)
	 *	   Address to be excluded from the optimized case
	 * [18:14] Reserved
	 * [28:19] Address Mask (36-27)
	 *	   The bits with an address mask of 1 are excluded from address comparison
	 * [31:29] Reserved
	 *
	 */
	PCI_ADDR(0, 0x18, 2, 0x60), 0xe007c01f, 0x00000000,
	PCI_ADDR(0, 0x18, 2, 0x64), 0xe007c01f, 0x00000000,
	PCI_ADDR(0, 0x18, 2, 0x68), 0xe007c01f, 0x00000000,
	PCI_ADDR(0, 0x18, 2, 0x6C), 0xe007c01f, 0x00000000,

	/* DRAM Control Register
	 * F2:0x78
	 * [ 3: 0] RdPtrInit ( Read Pointer Initial Value)
	 * 	0x03-0x00: reserved
	 * [ 6: 4] RdPadRcvFifoDly (Read Delay from Pad Receive FIFO)
	 *	000 = reserved
	 *	001 = reserved
	 *	010 = 1.5 Memory Clocks
	 *	011 = 2 Memory Clocks
	 *	100 = 2.5 Memory Clocks
	 *	101 = 3 Memory Clocks
	 *	110 = 3.5 Memory Clocks
	 *	111 = Reseved
	 * [15: 7] Reserved
	 * [16:16] AltVidC3MemClkTriEn (AltVID Memory Clock Tristate Enable)
	 *	Enables the DDR memory clocks to be tristated when alternate VID
	 *	mode is enabled. This bit has no effect if the DisNbClkRamp bit
	 *	(F3, 0x88) is set
	 * [17:17] DllTempAdjTime (DLL Temperature Adjust Cycle Time)
	 *	0 = 5 ms
	 *	1 = 1 ms
	 * [18:18] DqsRcvEnTrain (DQS Receiver Enable Training Mode)
	 *	0 = Normal DQS Receiver enable operation
	 *	1 = DQS receiver enable training mode
	  * [31:19] reverved
	 */
	PCI_ADDR(0, 0x18, 2, 0x78), 0xfff80000, (6<<4)|(6<<0),

	/* DRAM Initialization Register
	 * F2:0x7C
	 * [15: 0] MrsAddress (Address for MRS/EMRS Commands)
	 *	this field specifies the dsata driven on the DRAM address pins
	 *	15-0 for MRS and EMRS commands
	 * [18:16] MrsBank (Bank Address for MRS/EMRS Commands)
	 *	this files specifies the data driven on the DRAM bank pins for
	 *	the MRS and EMRS commands
	 * [23:19] reverved
	 * [24:24] SendPchgAll (Send Precharge All Command)
	 *	Setting this bit causes the DRAM controller to send a precharge
	 *	all command. This bit is cleared by the hardware after the
	 *	command completes
	 * [25:25] SendAutoRefresh (Send Auto Refresh Command)
	 *	Setting this bit causes the DRAM controller to send an auto
	 *	refresh command. This bit is cleared by the hardware after the
	 *	command completes
	 * [26:26] SendMrsCmd (Send MRS/EMRS Command)
	 *	Setting this bit causes the DRAM controller to send the MRS or
	 *	EMRS command defined by the MrsAddress and MrsBank fields. This
	 *	bit is cleared by the hardware adter the commmand completes
	 * [27:27] DeassertMemRstX (De-assert Memory Reset)
	 * 	Setting this bit causes the DRAM controller to de-assert the
	 *	memory reset pin. This bit cannot be used to assert the memory
	 *	reset pin
	 * [28:28] AssertCke (Assert CKE)
	 *	setting this bit causes the DRAM controller to assert the CKE
	 *	pins. This bit cannot be used to de-assert the CKE pins
	 * [30:29] reverved
	 * [31:31] EnDramInit (Enable DRAM Initialization)
	 *	Setting this bit puts the DRAM controller in a BIOS controlled
	 *	DRAM initialization mode. BIOS must clear this bit aster DRAM
	 *	initialization is complete.
	 */
//	PCI_ADDR(0, 0x18, 2, 0x7C), 0x60f80000, 0,


	/* DRAM Bank Address Mapping Register
	 * F2:0x80
	 * Specify the memory module size
	 * [ 3: 0] CS1/0
	 * [ 7: 4] CS3/2
	 * [11: 8] CS5/4
	 * [15:12] CS7/6
	 * [31:16]
	      row    col   bank
	  0:  13     9      2    :128M
	  1:  13     10     2    :256M
	  2:  14     10     2    :512M
	  3:  13     11     2    :512M
	  4:  13     10     3    :512M
	  5:  14     10     3    :1G
	  6:  14     11     2    :1G
	  7:  15     10     3    :2G
	  8:  14     11     3    :2G
	  9:  15     11     3    :4G
	 10:  16     10     3    :4G
	 11:  16     11     3    :8G
	 */
	PCI_ADDR(0, 0x18, 2, 0x80), 0xffff0000, 0x00000000,
	/* DRAM Timing Low Register
	 * F2:0x88
	 * [ 2: 0] Tcl (Cas# Latency, Cas# to read-data-valid)
	 *	   000 = reserved
	 *	   001 = reserved
	 *	   010 = CL 3
	 *	   011 = CL 4
	 *	   100 = CL 5
	 *	   101 = CL 6
	 *	   110 = reserved
	 *	   111 = reserved
	 * [ 3: 3] Reserved
	 * [ 5: 4] Trcd (Ras#-active to Cas# read/write delay)
	 *	   00 = 3 clocks
	 *	   01 = 4 clocks
	 *	   10 = 5 clocks
	 *	   11 = 6 clocks
	 * [ 7: 6] Reserved
	 * [ 9: 8] Trp (Row Precharge Time, Precharge-to-Active or Auto-Refresh)
	 *	   00 = 3 clocks
	 *	   01 = 4 clocks
	 *	   10 = 5 clocks
	 *	   11 = 6 clocks
	 * [10:10] Reserved
	 * [11:11] Trtp (Read to Precharge Time, read Cas# to precharge time)
	 *	   0 = 2 clocks for Burst Length of 32 Bytes
	 *	       4 clocks for Burst Length of 64 Bytes
	 *	   1 = 3 clocks for Burst Length of 32 Bytes
	 *	       5 clocks for Burst Length of 64 Bytes
	 * [15:12] Tras (Minimum Ras# Active Time)
	 *	   0000 = reserved
	 *	   0001 = reserved
	 *	   0010 = 5 bus clocks
	 *	   ...
	 *	   1111 = 18 bus clocks
	 * [19:16] Trc (Row Cycle Time, Ras#-active to Ras#-active or auto
	 * refresh of the same bank)
	 *	   0000 = 11 bus clocks
	 *	   0010 = 12 bus clocks
	 *	   ...
	 *	   1110 = 25 bus clocks
	 *	   1111 = 26 bus clocks
	 * [21:20] Twr (Write Recovery Time, From the last data to precharge,
	 * writes can go back-to-back)
	 *	   00 = 3 bus clocks
	 *	   01 = 4 bus clocks
	 *	   10 = 5 bus clocks
	 *	   11 = 6 bus clocks
	 * [23:22] Trrd (Active-to-active(Ras#-to-Ras#) Delay of different banks)
	 *	   00 = 2 bus clocks
	 *	   01 = 3 bus clocks
	 *	   10 = 4 bus clocks
	 *	   11 = 5 bus clocks
	 * [31:24] MemClkDis ( Disable the MEMCLK outputs for DRAM channel A,
	 * BIOS should set it to reduce the power consumption)
	 *	  Bit		F(1207)		M2 Package	S1g1 Package
	 *	    0		N/A		MA1_CLK1	N/A
	 *	    1		N/A		MA0_CLK1	MA0_CLK1
	 *	    2		MA3_CLK		N/A		N/A
	 *	    3		MA2_CLK		N/A		N/A
	 *	    4		MA1_CLK		MA1_CLK0	N/A
	 *	    5		MA0_CLK		MA0_CLK0	MA0_CLK0
	 *	    6		N/A		MA1_CLK2	N/A
	 *	    7		N/A		MA0_CLK2	MA0_CLK2
	 */
	PCI_ADDR(0, 0x18, 2, 0x88), 0x000004c8, 0xff000002 /* 0x03623125 */ ,
	/* DRAM Timing High Register
	 * F2:0x8C
	 * [ 3: 0] Reserved
	 * [ 6: 4] TrwtTO (Read-to-Write Turnaround for Data, DQS Contention)
	 *	   000 = 2 bus clocks
	 *	   001 = 3 bus clocks
	 *	   010 = 4 bus clocks
	 *	   011 = 5 bus clocks
	 *	   100 = 6 bus clocks
	 *	   101 = 7 bus clocks
	 *	   110 = 8 bus clocks
	 *	   111 = 9 bus clocks
	 * [ 7: 7] Reserved
	 * [ 9: 8] Twtr (Internal DRAM Write-to-Read Command Delay,
	 * minium write-to-read delay when both access the same chip select)
	 *	   00 = Reserved
	 *	   01 = 1 bus clocks
	 *	   10 = 2 bus clocks
	 *	   11 = 3 bus clocks
	 * [11:10] Twrrd (Write to Read DIMM Termination Turnaround, minimum
	 * write-to-read delay when accessing two different DIMMs)
	 *	   00 = 0 bus clocks
	 *	   01 = 1 bus clocks
	 *	   10 = 2 bus clocks
	 *	   11 = 3 bus clocks
	 * [13:12] Twrwr (Write to Write Timing)
	 *	   00 = 1 bus clocks ( 0 idle cycle on the bus)
	 *	   01 = 2 bus clocks ( 1 idle cycle on the bus)
	 *	   10 = 3 bus clocks ( 2 idle cycles on the bus)
	 *	   11 = Reserved
	 * [15:14] Trdrd ( Read to Read Timing)
	 *	   00 = 2 bus clocks ( 1 idle cycle on the bus)
	 *	   01 = 3 bus clocks ( 2 idle cycles on the bus)
	 *	   10 = 4 bus clocks ( 3 idle cycles on the bus)
	 *	   11 = 5 bus clocks ( 4 idel cycles on the bus)
	 * [17:16] Tref (Refresh Rate)
	 *	   00 = Undefined behavior
	 *	   01 = Reserved
	 *	   10 = Refresh interval of 7.8 microseconds
	 *	   11 = Refresh interval of 3.9 microseconds
	 * [19:18] Reserved
	 * [22:20] Trfc0 ( Auto-Refresh Row Cycle Time for the Logical DIMM0,
	 *	based on DRAM density and speed)
	 *	   000 = 75 ns (all speeds, 256Mbit)
	 *	   001 = 105 ns (all speeds, 512Mbit)
	 *	   010 = 127.5 ns (all speeds, 1Gbit)
	 *	   011 = 195 ns (all speeds, 2Gbit)
	 *	   100 = 327.5 ns (all speeds, 4Gbit)
	 *	   101 = reserved
	 *	   110 = reserved
	 *	   111 = reserved
	 * [25:23] Trfc1 ( Auto-Refresh Row Cycle Time for the Logical DIMM1,
	 *	based on DRAM density and speed)
	 * [28:26] Trfc2 ( Auto-Refresh Row Cycle Time for the Logical DIMM2,
	 *	based on DRAM density and speed)
	 * [31:29] Trfc3 ( Auto-Refresh Row Cycle Time for the Logical DIMM3,
	 *	based on DRAM density and speed)
	 */
	PCI_ADDR(0, 0x18, 2, 0x8c), 0x000c008f, (2 << 16)|(1 << 8),
	/* DRAM Config Low Register
	 * F2:0x90
	 * [ 0: 0] InitDram (Initialize DRAM)
	 *	   1 = write 1 cause DRAM controller to execute the DRAM
	 *	       initialization, when done it read to 0
	 * [ 1: 1] ExitSelfRef ( Exit Self Refresh Command )
	 *	   1 = write 1 causes the DRAM controller to bring the DRAMs out
	 *	       for self refresh mode
	 * [ 3: 2] Reserved
	 * [ 5: 4] DramTerm (DRAM Termination)
	 *	   00 = On die termination disabled
	 *	   01 = 75 ohms
	 *	   10 = 150 ohms
	 *	   11 = 50 ohms
	 * [ 6: 6] Reserved
	 * [ 7: 7] DramDrvWeak ( DRAM Drivers Weak Mode)
	 *	   0 = Normal drive strength mode.
	 *	   1 = Weak drive strength mode
	 * [ 8: 8] ParEn (Parity Enable)
	 *	   1 = Enable address parity computation output, PAR,
	 *	       and enables the parity error input, ERR
	 * [ 9: 9] SelfRefRateEn (Faster Self Refresh Rate Enable)
	 * 	  1 = Enable high temperature ( two times normal )
	 *	      self refresh rate
	 * [10:10] BurstLength32 ( DRAM Burst Length Set for 32 Bytes)
	 *	   0 = 64-byte mode
	 *	   1 = 32-byte mode
	 * [11:11] Width128 ( Width of DRAM interface)
	 *	   0 = the controller DRAM interface is 64-bits wide
	 *	   1 = the controller DRAM interface is 128-bits wide
	 * [12:12] X4Dimm (DIMM 0 is x4)
	 * [13:13] X4Dimm (DIMM 1 is x4)
	 * [14:14] X4Dimm (DIMM 2 is x4)
	 * [15:15] X4Dimm (DIMM 3 is x4)
	 *         0 = DIMM is not x4
	 *         1 = x4 DIMM present
	 * [16:16] UnBuffDimm ( Unbuffered DIMMs)
	 *	   0 = Buffered DIMMs
	 *	   1 = Unbuffered DIMMs
	 * [18:17] Reserved
	 * [19:19] DimmEccEn ( DIMM ECC Enable )
	 *	   1 =  ECC checking is being enabled for all DIMMs on the DRAM
	 *	        controller ( Through F3 0x44[EccEn])
	 * [31:20] Reserved
	 */
	PCI_ADDR(0, 0x18, 2, 0x90), 0xfff6004c, 0x00000010,
	/* DRAM Config High Register
	 * F2:0x94
	 * [ 0: 2] MemClkFreq ( Memory Clock Frequency)
	 *	   000 = 200MHz
	 *	   001 = 266MHz
	 *	   010 = 333MHz
	 *	   011 = reserved
	 *	   1xx = reserved
	 * [ 3: 3] MemClkFreqVal (Memory Clock Freqency Valid)
	 *	   1 = BIOS need to set the bit when setting up MemClkFreq to
	 *	       the proper value
	 * [ 7: 4] MaxAsyncLat ( Maximum Asynchronous Latency)
	 *         0000 = 0 ns
	 *         ...
	 *         1111 = 15 ns
	 * [11: 8] Reserved
	 * [12:12] RDqsEn ( Read DQS Enable) This bit is only be set if x8
	 *	   registered DIMMs are present in the system
	 *	   0 = DM pins function as data mask pins
	 *	   1 = DM pins function as read DQS pins
	 * [13:13] Reserved
	 * [14:14] DisDramInterface ( Disable the DRAM interface ) When this bit
	 * is set, the DRAM controller is disabled, and interface in low power
	 * state
	 *	   0 = Enabled (default)
	 *	   1 = Disabled
	 * [15:15] PowerDownEn ( Power Down Mode Enable )
	 *	   0 = Disabled (default)
	 *	   1 = Enabled
	 * [16:16] PowerDown ( Power Down Mode )
	 *	   0 = Channel CKE Control
	 *	   1 = Chip Select CKE Control
	 * [17:17] FourRankSODimm (Four Rank SO-DIMM)
	 *	   1 = this bit is set by BIOS to indicate that a four rank
	 *	       SO-DIMM is present
	 * [18:18] FourRankRDimm (Four Rank Registered DIMM)
	 *         1 = this bit is set by BIOS to indicate that a four rank
	 *	       registered DIMM is present
	 * [19:19] Reserved
	 * [20:20] SlowAccessMode (Slow Access Mode (2T Mode))
	 *	   0 = DRAM address and control signals are driven for one
	 *	       MEMCLK cycle
	 *	   1 = One additional MEMCLK of setup time is provided on all
	 *	       DRAM address and control signals except CS, CKE, and ODT;
	 *	       i.e., these signals are drivern for two MEMCLK cycles
	 *	       rather than one
	 * [21:21] Reserved
	 * [22:22] BankSwizzleMode ( Bank Swizzle Mode),
	 *         0 = Disabled (default)
	 *         1 = Enabled
	 * [23:23] Reserved
	 * [27:24] DcqBypassMax ( DRAM Controller Queue Bypass Maximum)
	 *	   0000 = No bypass; the oldest request is never bypassed
	 *	   0001 = The oldest request may be bypassed no more than 1 time
	 *	   ...
	 *	   1111 = The oldest request may be bypassed no more than 15\
	 *	          times
	 * [31:28] FourActWindow ( Four Bank Activate Window) , not more than
	 *	   4 banks in a 8 bank device are activated
	 *	   0000 = No tFAW window restriction
	 *	   0001 = 8 MEMCLK cycles
	 *	   0010 = 9 MEMCLK cycles
	 *	   ...
	 *	   1101 = 20 MEMCLK cycles
	 *	   111x = reserved
	 */
	PCI_ADDR(0, 0x18, 2, 0x94), 0x00a82f00,0x00008000,
	/* DRAM Delay Line Register
	 * F2:0xa0
	 * [ 0: 0] MemClrStatus (Memory Clear Status) : Readonly
	 *	   when set, this bit indicates that the memory clear function
	 *	   is complete. Only clear by reset. BIOS should not write or
	 *	   read the DRAM until this bit is set by hardware
	 * [ 1: 1] DisableJitter ( Disable Jitter)
	 *	   When set the DDR compensation circuit will not change the
	 *	   values unless the change is more than one step from the
	 *	   current value
	 * [ 3: 2] RdWrQByp ( Read/Write Queue Bypass Count)
	 *	   00 = 2
	 *	   01 = 4
	 *	   10 = 8
	 *	   11 = 16
	 * [ 4: 4] Mode64BitMux (Mismatched DIMM Support Enable)
	 *	   1 When bit enables support for mismatched DIMMs when using
	 *	   128-bit DRAM interface, the Width128 no effect, only for
	 *	   AM2 and s1g1
	 * [ 5: 5] DCC_EN ( Dynamica Idle Cycle Counter Enable)
	 *	   When set to 1, indicates that each entry in the page tables
	 *	   dynamically adjusts the idle cycle limit based on page
	 *	    Conflict/Page Miss (PC/PM) traffic
	 * [ 8: 6] ILD_lmt ( Idle Cycle Limit)
	 *	   000 = 0 cycles
	 *	   001 = 4 cycles
	 *	   010 = 8 cycles
	 *	   011 = 16 cycles
	 *	   100 = 32 cycles
	 *	   101 = 64 cycles
	 *	   110 = 128 cycles
	 *	   111 = 256 cycles
	 * [ 9: 9] DramEnabled ( DRAM Enabled)
	 *	   When Set, this bit indicates that the DRAM is enabled, this
	 *	   bit is set by hardware after DRAM initialization or on an exit
	 *	   from self refresh. The DRAM controller is intialized after the
	 *	   hardware-controlled initialization process ( initiated by the
	 *	   F2 0x90[DramInit]) completes or when the BIOS-controlled
	 *	   initialization process completes (F2 0x7c(EnDramInit] is
	 *	   written from 1 to 0)
	 * [23:10] Reserved
	 * [31:24] MemClkDis ( Disable the MEMCLK outputs for DRAM channel B,
	 *	   BIOS should set it to reduce the power consumption)
	 *         Bit          F(1207)         M2 Package      S1g1 Package
	 *          0           N/A             MA1_CLK1        N/A
	 *          1           N/A             MA0_CLK1        MA0_CLK1
	 *          2           MA3_CLK         N/A             N/A
	 *          3           MA2_CLK         N/A             N/A
	 *          4           MA1_CLK         MA1_CLK0        N/A
	 *          5           MA0_CLK         MA0_CLK0        MA0_CLK0
	 *          6           N/A             MA1_CLK2        N/A
	 *          7           N/A             MA0_CLK2        MA0_CLK2
	 */
	PCI_ADDR(0, 0x18, 2, 0xa0), 0x00fffc00, 0xff000000,

	/* DRAM Scrub Control Register
	 * F3:0x58
	 * [ 4: 0] DRAM Scrube Rate
	 * [ 7: 5] reserved
	 * [12: 8] L2 Scrub Rate
	 * [15:13] reserved
	 * [20:16] Dcache Scrub
	 * [31:21] reserved
	 *	   Scrub Rates
	 *	   00000 = Do not scrub
	 *	   00001 =  40.00 ns
	 *	   00010 =  80.00 ns
	 *	   00011 = 160.00 ns
	 *	   00100 = 320.00 ns
	 *	   00101 = 640.00 ns
	 *	   00110 =   1.28 us
	 *	   00111 =   2.56 us
	 *	   01000 =   5.12 us
	 *	   01001 =  10.20 us
	 *	   01011 =  41.00 us
	 *	   01100 =  81.90 us
	 *	   01101 = 163.80 us
	 *	   01110 = 327.70 us
	 *	   01111 = 655.40 us
	 *	   10000 =   1.31 ms
	 *	   10001 =   2.62 ms
	 *	   10010 =   5.24 ms
	 *	   10011 =  10.49 ms
	 *	   10100 =  20.97 ms
	 *	   10101 =  42.00 ms
	 *	   10110 =  84.00 ms
	 *	   All Others = Reserved
	 */
	PCI_ADDR(0, 0x18, 3, 0x58), 0xffe0e0e0, 0x00000000,
	/* DRAM Scrub Address Low Register
	 * F3:0x5C
	 * [ 0: 0] DRAM Scrubber Redirect Enable
	 *	   0 = Do nothing
	 *	   1 = Scrubber Corrects errors found in normal operation
	 * [ 5: 1] Reserved
	 * [31: 6] DRAM Scrub Address 31-6
	 */
	PCI_ADDR(0, 0x18, 3, 0x5C), 0x0000003e, 0x00000000,
	/* DRAM Scrub Address High Register
	 * F3:0x60
	 * [ 7: 0] DRAM Scrubb Address 39-32
	 * [31: 8] Reserved
	 */
	PCI_ADDR(0, 0x18, 3, 0x60), 0xffffff00, 0x00000000,
	};
	/* for PCI_ADDR(0, 0x18, 2, 0x98) index,
	 and PCI_ADDR(0x, 0x18, 2, 0x9c) data */
	/*
		index:
		[29: 0] DctOffset (Dram Controller Offset)
		[30:30] DctAccessWrite (Dram Controller Read/Write Select)
			0 = read access
			1 = write access
		[31:31] DctAccessDone (Dram Controller Access Done)
			0 = Access in progress
			1 = No access is progress

		Data:
		[31: 0] DctOffsetData (Dram Controller Offset Data)

		Read:
			- Write the register num to DctOffset with DctAccessWrite = 0
			- poll the DctAccessDone until it = 1
			- Read the data from DctOffsetData
		Write:
			- Write the data to DctOffsetData
			- Write register num to DctOffset with DctAccessWrite = 1
			- poll the DctAccessDone untio it = 1

	*/
	int i;
	int max;

	if (!controller_present(ctrl)) {
		sysinfo->ctrl_present[ctrl->node_id] = 0;
		return;
	}
	sysinfo->ctrl_present[ctrl->node_id] = 1;

	printk(BIOS_SPEW, "setting up CPU %02x northbridge registers\n", ctrl->node_id);
	max = ARRAY_SIZE(register_values);
	for (i = 0; i < max; i += 3) {
		device_t dev;
		unsigned where;
		unsigned long reg;
		dev = (register_values[i] & ~0xff) - PCI_DEV(0, 0x18, 0) + ctrl->f0;
		where = register_values[i] & 0xff;
		reg = pci_read_config32(dev, where);
		reg &= register_values[i+1];
		reg |= register_values[i+2];
		pci_write_config32(dev, where, reg);
	}
	printk(BIOS_SPEW, "done.\n");
}

#if 0
static int is_dual_channel(const struct mem_controller *ctrl)
{
	uint32_t dcl;
	dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
	return dcl & DCL_Width128;
}
#endif

static int is_opteron(const struct mem_controller *ctrl)
{
	/* Test to see if I am an Opteron. M2 and S1G1 support dual
	 * channel, too, but only support unbuffered DIMMs so we need a
	 * better test for Opterons.
	 * However, all code uses is_opteron() to find out whether to
	 * use dual channel, so if we really check for opteron here, we
	 * need to fix up all code using this function, too.
	 */

	uint32_t nbcap;
	nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP);
	return !!(nbcap & NBCAP_128Bit);
}

#if 0
static int is_registered(const struct mem_controller *ctrl)
{
	/* Test to see if we are dealing with registered SDRAM.
	 * If we are not registered we are unbuffered.
	 * This function must be called after spd_handle_unbuffered_dimms.
	 */
	uint32_t dcl;
	dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
	return !(dcl & DCL_UnBuffDimm);
}
#endif

static void spd_get_dimm_size(unsigned device, struct dimm_size *sz)
{
	/* Calculate the log base 2 size of a DIMM in bits */
	int value;
	sz->per_rank = 0;
	sz->rows = 0;
	sz->col = 0;
	sz->rank = 0;

	value = spd_read_byte(device, SPD_ROW_NUM);	/* rows */
	if (value < 0) goto hw_err;
	if ((value & 0xff) == 0) goto val_err; /* max is 16 ? */
	sz->per_rank += value & 0xff;
	sz->rows = value & 0xff;

	value = spd_read_byte(device, SPD_COL_NUM);	/* columns */
	if (value < 0) goto hw_err;
	if ((value & 0xff) == 0) goto val_err;  /* max is 11 */
	sz->per_rank += value & 0xff;
	sz->col = value & 0xff;

	value = spd_read_byte(device, SPD_BANK_NUM);	/* banks */
	if (value < 0) goto hw_err;
	if ((value & 0xff) == 0) goto val_err;
	sz->bank = log2(value & 0xff);  // convert 4 to 2, and 8 to 3
	sz->per_rank += sz->bank;

	/* Get the module data width and convert it to a power of two */
	value = spd_read_byte(device, SPD_DATA_WIDTH);
	if (value < 0) goto hw_err;
	value &= 0xff;
	if ((value != 72) && (value != 64)) goto val_err;
	sz->per_rank += log2(value) - 3; //64 bit So another 3 lines

	/* How many ranks? */
	/* number of physical banks */
	value = spd_read_byte(device, SPD_MOD_ATTRIB_RANK);
	if (value < 0) goto hw_err;
/*	value >>= SPD_MOD_ATTRIB_RANK_NUM_SHIFT; */
	value &= SPD_MOD_ATTRIB_RANK_NUM_MASK;
	value += SPD_MOD_ATTRIB_RANK_NUM_BASE; // 0-->1, 1-->2, 3-->4
	/*
	  rank == 1 only one rank or say one side
	  rank == 2 two side , and two ranks
	  rank == 4 two side , and four ranks total
	  Some one side two ranks, because of stacked
	*/
	if ((value != 1) && (value != 2) && (value != 4 )) {
		goto val_err;
	}
	sz->rank = value;

	/* verify if per_rank is equal byte 31
	  it has the DIMM size as a multiple of 128MB.
	  */
	value = spd_read_byte(device, SPD_RANK_SIZE);
	if (value < 0) goto hw_err;
	value &= 0xff;
	value = log2(value);
	if (value <=4 ) value += 8; // add back to 1G to high
	value += (27-5); // make 128MB to the real lines
	if ( value != (sz->per_rank)) {
		printk(BIOS_ERR, "Bad RANK Size --\n");
		goto val_err;
	}

	goto out;

 val_err:
	die("Bad SPD value\n");
	/* If an hw_error occurs report that I have no memory */
 hw_err:
	sz->per_rank = 0;
	sz->rows = 0;
	sz->col = 0;
	sz->bank = 0;
	sz->rank = 0;
 out:
	return;
}


static void set_dimm_size(const struct mem_controller *ctrl,
			  struct dimm_size *sz, unsigned index,
			  struct mem_info *meminfo)
{
	uint32_t base0, base1;

	/* For each base register.
	 * Place the dimm size in 32 MB quantities in the bits 31 - 21.
	 * The initialize dimm size is in bits.
	 * Set the base enable bit0.
	 */

	base0 = base1 = 0;

	/* Make certain side1 of the dimm is at least 128MB */
	if (sz->per_rank >= 27) {
		base0 = (1 << ((sz->per_rank - 27 ) + 19)) | 1;
	}

	/* Make certain side2 of the dimm is at least 128MB */
	if (sz->rank > 1) { // 2 ranks or 4 ranks
		base1 = (1 << ((sz->per_rank - 27 ) + 19)) | 1;
	}

	/* Double the size if we are using dual channel memory */
	if (meminfo->is_Width128) {
		base0 = (base0 << 1) | (base0 & 1);
		base1 = (base1 << 1) | (base1 & 1);
	}

	/* Clear the reserved bits */
	base0 &= ~0xe007fffe;
	base1 &= ~0xe007fffe;

	if (!(meminfo->dimm_mask & 0x0F) && (meminfo->dimm_mask & 0xF0)) { /* channelB only? */
		pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1) + 4) << 2), base0);
		pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1) + 5) << 2), base1);
	} else {
		/* Set the appropriate DIMM base address register */
		pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1) + 0) << 2), base0);
		pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1) + 1) << 2), base1);
#if CONFIG_QRANK_DIMM_SUPPORT
		if (sz->rank == 4) {
			pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1) + 4) << 2), base0);
			pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1) + 5) << 2), base1);
		}
#endif
	}

	/* Enable the memory clocks for this DIMM by Clear the MemClkDis bit*/
	if (base0) {
		uint32_t dword;
		uint32_t ClkDis0;
#if CONFIG_CPU_SOCKET_TYPE == 0x10 /* L1 */
		ClkDis0 = DTL_MemClkDis0;
#elif CONFIG_CPU_SOCKET_TYPE == 0x11 /* AM2 */
		ClkDis0 = DTL_MemClkDis0_AM2;
#elif CONFIG_CPU_SOCKET_TYPE == 0x12	/* S1G1 */
		ClkDis0 = DTL_MemClkDis0_S1g1;
#endif

		if (!(meminfo->dimm_mask & 0x0F) && (meminfo->dimm_mask & 0xF0)) { /* channelB only? */
			dword = pci_read_config32(ctrl->f2, DRAM_CTRL_MISC);
			dword &= ~(ClkDis0 >> index);
			pci_write_config32(ctrl->f2, DRAM_CTRL_MISC, dword);

		} else {
			dword = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW); //Channel A
			dword &= ~(ClkDis0 >> index);
#if CONFIG_QRANK_DIMM_SUPPORT
			if (sz->rank == 4) {
				dword &= ~(ClkDis0 >> (index+2));
			}
#endif
			pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dword);

			if (meminfo->is_Width128) { // ChannelA+B
				dword = pci_read_config32(ctrl->f2, DRAM_CTRL_MISC);
				dword &= ~(ClkDis0 >> index);
#if CONFIG_QRANK_DIMM_SUPPORT
				if (sz->rank == 4) {
					dword &= ~(ClkDis0 >> (index+2));
				}
#endif
				pci_write_config32(ctrl->f2, DRAM_CTRL_MISC, dword);
			}
		}

	}
}

/*    row    col   bank  for 64 bit
  0:  13     9      2    :128M
  1:  13     10     2    :256M
  2:  14     10     2    :512M
  3:  13     11     2    :512M
  4:  13     10     3    :512M
  5:  14     10     3    :1G
  6:  14     11     2    :1G
  7:  15     10     3    :2G
  8:  14     11     3    :2G
  9:  15     11     3    :4G
 10:  16     10     3    :4G
 11:  16     11     3    :8G
*/


static void set_dimm_cs_map(const struct mem_controller *ctrl,
			     struct dimm_size *sz, unsigned index,
			     struct mem_info *meminfo)
{
	static const uint8_t cs_map_aaa[24] = {
		/* (bank=2, row=13, col=9)(3, 16, 11) ---> (0, 0, 0) (1, 3, 2) */
	//Bank2
		0, 1, 3,
		0, 2, 6,
		0, 0, 0,
		0, 0, 0,
	//Bank3
		0, 4, 0,
		0, 5, 8,
		0, 7, 9,
		0,10,11,
	};

	uint32_t map;

	if (!(meminfo->dimm_mask & 0x0F) && (meminfo->dimm_mask & 0xF0)) { /* channelB only? */
		index += 2;
	}
	map = pci_read_config32(ctrl->f2, DRAM_BANK_ADDR_MAP);
	map &= ~(0xf << (index * 4));
#if CONFIG_QRANK_DIMM_SUPPORT
	if (sz->rank == 4) {
		map &= ~(0xf << ( (index + 2) * 4));
	}
#endif

	/* Make certain side1 of the dimm is at least 128MB */
	if (sz->per_rank >= 27) {
		unsigned temp_map;
		temp_map = cs_map_aaa[(sz->bank-2)*3*4 + (sz->rows - 13)*3 + (sz->col - 9) ];
		map |= temp_map << (index*4);
#if CONFIG_QRANK_DIMM_SUPPORT
		if (sz->rank == 4) {
			map |=  temp_map << ( (index + 2) * 4);
		}
#endif
	}

	pci_write_config32(ctrl->f2, DRAM_BANK_ADDR_MAP, map);

}


static long spd_set_ram_size(const struct mem_controller *ctrl,
			      struct mem_info *meminfo)
{
	int i;

	for (i = 0; i < DIMM_SOCKETS; i++) {
		struct dimm_size *sz = &(meminfo->sz[i]);
		u32 spd_device = ctrl->channel0[i];

		if (!(meminfo->dimm_mask & (1 << i))) {
			if (meminfo->dimm_mask & (1 << (DIMM_SOCKETS + i))) { /* channelB only? */
				spd_device = ctrl->channel1[i];
			} else {
				continue;
			}
		}

		spd_get_dimm_size(spd_device, sz);
		if (sz->per_rank == 0) {
			return -1; /* Report SPD error */
		}
		set_dimm_size(ctrl, sz, i, meminfo);
		set_dimm_cs_map(ctrl, sz, i, meminfo);
	}
	return meminfo->dimm_mask;
}

static void route_dram_accesses(const struct mem_controller *ctrl,
				unsigned long base_k, unsigned long limit_k)
{
	/* Route the addresses to the controller node */
	unsigned node_id;
	unsigned limit;
	unsigned base;
	unsigned index;
	unsigned limit_reg, base_reg;
	device_t device;

	node_id = ctrl->node_id;
	index = (node_id << 3);
	limit = (limit_k << 2);
	limit &= 0xffff0000;
	limit -= 0x00010000;
	limit |= ( 0 << 8) | (node_id << 0);
	base = (base_k << 2);
	base &= 0xffff0000;
	base |= (0 << 8) | (1<<1) | (1<<0);

	limit_reg = 0x44 + index;
	base_reg = 0x40 + index;
	for (device = PCI_DEV(0, 0x18, 1); device <= PCI_DEV(0, 0x1f, 1);
	     device += PCI_DEV(0, 1, 0)) {
		pci_write_config32(device, limit_reg, limit);
		pci_write_config32(device, base_reg, base);
	}
}

static void set_top_mem(unsigned tom_k, unsigned hole_startk)
{
	/* Error if I don't have memory */
	if (!tom_k) {
		die("No memory?");
	}

	/* Report the amount of memory. */
	printk(BIOS_DEBUG, "RAM end at 0x%08x kB\n", tom_k);

	/* Now set top of memory */
	msr_t msr;
	if (tom_k > (4*1024*1024)) {
		printk_raminit("Handling memory mapped above 4 GB\n");
		printk_raminit("Upper RAM end at 0x%08x kB\n", tom_k);
		msr.lo = (tom_k & 0x003fffff) << 10;
		msr.hi = (tom_k & 0xffc00000) >> 22;
		wrmsr(TOP_MEM2, msr);
		printk_raminit("Correcting memory amount mapped below 4 GB\n");
	}

	/* Leave a 64M hole between TOP_MEM and TOP_MEM2
	 * so I can see my rom chip and other I/O devices.
	 */
	if (tom_k >= 0x003f0000) {
#if CONFIG_HW_MEM_HOLE_SIZEK != 0
		if (hole_startk != 0) {
			tom_k = hole_startk;
		} else
#endif
		tom_k = 0x3f0000;
		printk_raminit("Adjusting lower RAM end\n");
	}
	printk_raminit("Lower RAM end at 0x%08x kB\n", tom_k);
	msr.lo = (tom_k & 0x003fffff) << 10;
	msr.hi = (tom_k & 0xffc00000) >> 22;
	wrmsr(TOP_MEM, msr);
}

static unsigned long interleave_chip_selects(const struct mem_controller *ctrl, int is_Width128)
{
	/* 35 - 27 */

	static const uint8_t csbase_low_f0_shift[] = {
	 /* 128MB */       (14 - (13-5)),
	 /* 256MB */       (15 - (13-5)),
	 /* 512MB */       (15 - (13-5)),
	 /* 512MB */       (16 - (13-5)),
	 /* 512MB */       (16 - (13-5)),
	 /* 1GB   */       (16 - (13-5)),
	 /* 1GB   */       (16 - (13-5)),
	 /* 2GB   */       (16 - (13-5)),
	 /* 2GB   */       (17 - (13-5)),
	 /* 4GB   */       (17 - (13-5)),
	 /* 4GB   */       (16 - (13-5)),
	 /* 8GB   */       (17 - (13-5)),
	};

	/* cs_base_high is not changed */

	uint32_t csbase_inc;
	int chip_selects, index;
	int bits;
	unsigned common_size;
	unsigned common_cs_mode;
	uint32_t csbase, csmask;

	/* See if all of the memory chip selects are the same size
	 * and if so count them.
	 */
	chip_selects = 0;
	common_size = 0;
	common_cs_mode = 0xff;
	for (index = 0; index < 8; index++) {
		unsigned size;
		unsigned cs_mode;
		uint32_t value;

		value = pci_read_config32(ctrl->f2, DRAM_CSBASE + (index << 2));

		/* Is it enabled? */
		if (!(value & 1)) {
			continue;
		}
		chip_selects++;
		size = (value >> 19) & 0x3ff;
		if (common_size == 0) {
			common_size = size;
		}
		/* The size differed fail */
		if (common_size != size) {
			return 0;
		}

		value = pci_read_config32(ctrl->f2, DRAM_BANK_ADDR_MAP);
		cs_mode =( value >> ((index>>1)*4)) & 0xf;
		if (common_cs_mode == 0xff) {
			common_cs_mode = cs_mode;
		}
		/* The cs_mode differed fail */
		if (common_cs_mode != cs_mode) {
			return 0;
		}
	}

	/* Chip selects can only be interleaved when there is
	 * more than one and their is a power of two of them.
	 */
	bits = log2(chip_selects);
	if (((1 << bits) != chip_selects) || (bits < 1) || (bits > 3)) {
		//chip_selects max = 8
		return 0;
	}

	/* Find the bits of csbase that we need to interleave on */
	csbase_inc = 1 << (csbase_low_f0_shift[common_cs_mode]);
	if (is_Width128) {
		csbase_inc <<=1;
	}

	/* Compute the initial values for csbase and csbask.
	 * In csbase just set the enable bit and the base to zero.
	 * In csmask set the mask bits for the size and page level interleave.
	 */
	csbase = 0 | 1;
	csmask = (((common_size  << bits) - 1) << 19);
	csmask |= 0x3fe0 & ~((csbase_inc << bits) - csbase_inc);
	for (index = 0; index < 8; index++) {
		uint32_t value;

		value = pci_read_config32(ctrl->f2, DRAM_CSBASE + (index << 2));
		/* Is it enabled? */
		if (!(value & 1)) {
			continue;
		}
		pci_write_config32(ctrl->f2, DRAM_CSBASE + (index << 2), csbase);
		if ((index & 1) == 0) {  //only have 4 CSMASK
			pci_write_config32(ctrl->f2, DRAM_CSMASK + ((index>>1) << 2), csmask);
		}
		csbase += csbase_inc;
	}

	printk(BIOS_DEBUG, "Interleaved\n");

	/* Return the memory size in K */
	return common_size << ((27-10) + bits);
}

static unsigned long order_chip_selects(const struct mem_controller *ctrl)
{
	unsigned long tom;

	/* Remember which registers we have used in the high 8 bits of tom */
	tom = 0;
	for (;;) {
		/* Find the largest remaining canidate */
		unsigned index, canidate;
		uint32_t csbase, csmask;
		unsigned size;
		csbase = 0;
		canidate = 0;
		for (index = 0; index < 8; index++) {
			uint32_t value;
			value = pci_read_config32(ctrl->f2, DRAM_CSBASE + (index << 2));

			/* Is it enabled? */
			if (!(value & 1)) {
				continue;
			}

			/* Is it greater? */
			if (value <= csbase) {
				continue;
			}

			/* Has it already been selected */
			if (tom & (1 << (index + 24))) {
				continue;
			}
			/* I have a new canidate */
			csbase = value;
			canidate = index;
		}

		/* See if I have found a new canidate */
		if (csbase == 0) {
			break;
		}

		/* Remember the dimm size */
		size = csbase >> 19;

		/* Remember I have used this register */
		tom |= (1 << (canidate + 24));

		/* Recompute the cs base register value */
		csbase = (tom << 19) | 1;

		/* Increment the top of memory */
		tom += size;

		/* Compute the memory mask */
		csmask = ((size -1) << 19);
		csmask |= 0x3fe0;		/* For now don't optimize */

		/* Write the new base register */
		pci_write_config32(ctrl->f2, DRAM_CSBASE + (canidate << 2), csbase);
		/* Write the new mask register */
		if ((canidate & 1) == 0) {  //only have 4 CSMASK
			pci_write_config32(ctrl->f2, DRAM_CSMASK + ((canidate >> 1) << 2), csmask);
		}

	}
	/* Return the memory size in K */
	return (tom & ~0xff000000) << (27-10);
}

static unsigned long memory_end_k(const struct mem_controller *ctrl, int max_node_id)
{
	unsigned node_id;
	unsigned end_k;
	/* Find the last memory address used */
	end_k = 0;
	for (node_id = 0; node_id < max_node_id; node_id++) {
		uint32_t limit, base;
		unsigned index;
		index = node_id << 3;
		base = pci_read_config32(ctrl->f1, 0x40 + index);
		/* Only look at the limit if the base is enabled */
		if ((base & 3) == 3) {
			limit = pci_read_config32(ctrl->f1, 0x44 + index);
			end_k = ((limit + 0x00010000) & 0xffff0000) >> 2;
		}
	}
	return end_k;
}

static void order_dimms(const struct mem_controller *ctrl,
			 struct mem_info *meminfo)
{
	unsigned long tom_k, base_k;

	if (read_option(CMOS_VSTART_interleave_chip_selects,
	    CMOS_VLEN_interleave_chip_selects, 1) != 0) {
		tom_k = interleave_chip_selects(ctrl, meminfo->is_Width128);
	} else {
		printk(BIOS_DEBUG, "Interleaving disabled\n");
		tom_k = 0;
	}

	if (!tom_k) {
		tom_k = order_chip_selects(ctrl);
	}

	/* Compute the memory base address */
	base_k = memory_end_k(ctrl, ctrl->node_id);
	tom_k += base_k;
	route_dram_accesses(ctrl, base_k, tom_k);
	set_top_mem(tom_k, 0);
}

static long disable_dimm(const struct mem_controller *ctrl, unsigned index,
			  struct mem_info *meminfo)
{
	printk(BIOS_DEBUG, "disabling dimm %02x\n", index);
	if (!(meminfo->dimm_mask & 0x0F) && (meminfo->dimm_mask & 0xF0)) { /* channelB only? */
		pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1) + 4) << 2), 0);
		pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1) + 5) << 2), 0);
	} else {
		pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1) + 0) << 2), 0);
		pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1) + 1) << 2), 0);
#if CONFIG_QRANK_DIMM_SUPPORT
		if (meminfo->sz[index].rank == 4) {
			pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1) + 4) << 2), 0);
			pci_write_config32(ctrl->f2, DRAM_CSBASE + (((index << 1) + 5) << 2), 0);
		}
#endif
	}

	meminfo->dimm_mask &= ~(1 << index);
	return meminfo->dimm_mask;
}

static long spd_handle_unbuffered_dimms(const struct mem_controller *ctrl,
					 struct mem_info *meminfo)
{
	int i;
	uint32_t registered;
	uint32_t dcl;
	registered = 0;
	for (i = 0; (i < DIMM_SOCKETS); i++) {
		int value;
		u32 spd_device = ctrl->channel0[i];
		if (!(meminfo->dimm_mask & (1 << i))) {
			if (meminfo->dimm_mask & (1 << (DIMM_SOCKETS + i))) { /* channelB only? */
				spd_device = ctrl->channel1[i];
			} else {
				continue;
			}
		}
		value = spd_read_byte(spd_device, SPD_DIMM_TYPE);
		if (value < 0) {
			return -1;
		}

		/* Registered dimm ? */
		value &= 0x3f;
		if ((value == SPD_DIMM_TYPE_RDIMM) || (value == SPD_DIMM_TYPE_mRDIMM)) {
			//check SPD_MOD_ATTRIB to verify it is SPD_MOD_ATTRIB_REGADC (0x11)?
			registered |= (1<<i);
		}
	}

	if (is_opteron(ctrl)) {
#if 0
		if ( registered != (meminfo->dimm_mask & ((1<<DIMM_SOCKETS)-1)) ) {
			meminfo->dimm_mask &= (registered | (registered << DIMM_SOCKETS) ); //disable unbuffed dimm
//			die("Mixed buffered and registered dimms not supported");
		}
		//By yhlu for debug M2, s1g1 can do dual channel, but it use unbuffer DIMM
		if (!registered) {
			die("Unbuffered Dimms not supported on Opteron");
		}
#endif
	}


	dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
	dcl &= ~DCL_UnBuffDimm;
	meminfo->is_registered = 1;
	if (!registered) {
		dcl |= DCL_UnBuffDimm;
		meminfo->is_registered = 0;
	}
	pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl);

	if (meminfo->is_registered) {
		printk(BIOS_SPEW, "Registered\n");
	} else {
		printk(BIOS_SPEW, "Unbuffered\n");
	}
	return meminfo->dimm_mask;
}

static unsigned int spd_detect_dimms(const struct mem_controller *ctrl)
{
	unsigned dimm_mask;
	int i;
	dimm_mask = 0;
	for (i = 0; i < DIMM_SOCKETS; i++) {
		int byte;
		unsigned device;
		device = ctrl->channel0[i];
		printk_raminit("DIMM socket %i, channel 0 SPD device is 0x%02x\n", i, device);
		if (device) {
			byte = spd_read_byte(ctrl->channel0[i], SPD_MEM_TYPE);  /* Type */
			if (byte == SPD_MEM_TYPE_SDRAM_DDR2) {
				dimm_mask |= (1 << i);
			}
		}
		device = ctrl->channel1[i];
		printk_raminit("DIMM socket %i, channel 1 SPD device is 0x%02x\n", i, device);
		if (device) {
			byte = spd_read_byte(ctrl->channel1[i], SPD_MEM_TYPE);
			if (byte == SPD_MEM_TYPE_SDRAM_DDR2) {
				dimm_mask |= (1 << (i + DIMM_SOCKETS));
			}
		}
	}
	return dimm_mask;
}

static long spd_enable_2channels(const struct mem_controller *ctrl, struct mem_info *meminfo)
{
	int i;
	uint32_t nbcap;
	/* SPD addresses to verify are identical */
	static const uint8_t addresses[] = {
		2,	/* Type should be DDR2 SDRAM */
		3,	/* *Row addresses */
		4,	/* *Column addresses */
		5,	/* *Number of DIMM Ranks */
		6,	/* *Module Data Width*/
		11,	/* *DIMM Conf Type */
		13,	/* *Pri SDRAM Width */
		17,	/* *Logical Banks */
		20,	/* *DIMM Type Info */
		21,	/* *SDRAM Module Attributes */
		27,	/* *tRP Row precharge time */
		28,	/* *Minimum Row Active to Row Active Delay (tRRD) */
		29,	/* *tRCD RAS to CAS */
		30,	/* *tRAS Activate to Precharge */
		36,	/* *Write recovery time (tWR) */
		37,	/* *Internal write to read command delay (tRDP) */
		38,	/* *Internal read to precharge command delay (tRTP) */
		40,	/* *Extension of Byte 41 tRC and Byte 42 tRFC */
		41,	/* *Minimum Active to Active/Auto Refresh Time(Trc) */
		42,	/* *Minimum Auto Refresh Command Time(Trfc) */
		/* The SPD addresses 18, 9, 23, 26 need special treatment like
		 * in spd_set_memclk. Right now they cause many false negatives.
		 * Keep them at the end to see other mismatches (if any).
		 */
		18,	/* *Supported CAS Latencies */
		9,	/* *Cycle time at highest CAS Latency CL=X */
		23,	/* *Cycle time at CAS Latency (CLX - 1) */
		26,	/* *Cycle time at CAS Latency (CLX - 2) */
	};
	u32 dcl, dcm;
	u8 common_cl;

/* S1G1 and AM2 sockets are Mod64BitMux capable. */
#if CONFIG_CPU_SOCKET_TYPE == 0x11 || CONFIG_CPU_SOCKET_TYPE == 0x12
	u8 mux_cap = 1;
#else
	u8 mux_cap = 0;
#endif

	/* If the dimms are not in pairs do not do dual channels */
	if ((meminfo->dimm_mask & ((1 << DIMM_SOCKETS) - 1)) !=
		((meminfo->dimm_mask >> DIMM_SOCKETS) & ((1 << DIMM_SOCKETS) - 1))) {
		goto single_channel;
	}
	/* If the cpu is not capable of doing dual channels don't do dual channels */
	nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP);
	if (!(nbcap & NBCAP_128Bit)) {
		goto single_channel;
	}
	for (i = 0; (i < 4) && (ctrl->channel0[i]); i++) {
		unsigned device0, device1;
		int value0, value1;
		int j;
		/* If I don't have a dimm skip this one */
		if (!(meminfo->dimm_mask & (1 << i))) {
			continue;
		}
		device0 = ctrl->channel0[i];
		device1 = ctrl->channel1[i];
		/* Abort if the chips don't support a common CAS latency. */
		common_cl = spd_read_byte(device0, 18) & spd_read_byte(device1, 18);
		if (!common_cl) {
			printk(BIOS_DEBUG, "No common CAS latency supported\n");
			goto single_channel;
		} else {
			printk_raminit("Common CAS latency bitfield: 0x%02x\n", common_cl);
		}
		for (j = 0; j < ARRAY_SIZE(addresses); j++) {
			unsigned addr;
			addr = addresses[j];
			value0 = spd_read_byte(device0, addr);
			if (value0 < 0) {
				return -1;
			}
			value1 = spd_read_byte(device1, addr);
			if (value1 < 0) {
				return -1;
			}
			if (value0 != value1) {
				printk_raminit("SPD values differ between channel 0/1 for byte %i\n", addr);
				goto single_channel;
			}
		}
	}
	printk(BIOS_SPEW, "Enabling dual channel memory\n");
	dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
	dcl &= ~DCL_BurstLength32;  /*	32byte mode may be preferred in platforms that include graphics controllers that generate a lot of 32-bytes system memory accesses
					32byte mode is not supported when the DRAM interface is 128 bits wides, even 32byte mode is set, system still use 64 byte mode	*/
	dcl |= DCL_Width128;
	pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl);
	meminfo->is_Width128 = 1;
	return meminfo->dimm_mask;

 single_channel:
	meminfo->is_Width128 = 0;
	meminfo->is_64MuxMode = 0;

	/* single dimm */
	if ((meminfo->dimm_mask & ((1 << DIMM_SOCKETS) - 1)) !=
	   ((meminfo->dimm_mask >> DIMM_SOCKETS) & ((1 << DIMM_SOCKETS) - 1))) {
		if (((meminfo->dimm_mask >> DIMM_SOCKETS) & ((1 << DIMM_SOCKETS) - 1))) {
			/* mux capable and single dimm in channelB */
			if (mux_cap) {
				printk(BIOS_SPEW, "Enable 64MuxMode & BurstLength32\n");
				dcm = pci_read_config32(ctrl->f2, DRAM_CTRL_MISC);
				dcm |= DCM_Mode64BitMux;
				pci_write_config32(ctrl->f2, DRAM_CTRL_MISC, dcm);
				dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
				//dcl |= DCL_BurstLength32; /* 32byte mode for channelB only */
				pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl);
				meminfo->is_64MuxMode = 1;
			} else {
				meminfo->dimm_mask &= ~((1 << (DIMM_SOCKETS * 2)) - (1 << DIMM_SOCKETS));
			}
		}
	} else { /* unmatched dual dimms ? */
		/* unmatched dual dimms not supported by meminit code. Use single channelA dimm. */
		meminfo->dimm_mask &= ~((1 << (DIMM_SOCKETS * 2)) - (1 << DIMM_SOCKETS));
		printk(BIOS_SPEW, "Unmatched dual dimms. Use single channelA dimm.\n");
	}
	return meminfo->dimm_mask;
}

struct mem_param {
	uint16_t cycle_time;
	uint8_t divisor; /* In 1/40 ns increments */
	uint8_t TrwtTO;
	uint8_t Twrrd;
	uint8_t Twrwr;
	uint8_t Trdrd;
	uint8_t DcqByPassMax;
	uint32_t dch_memclk;
	char name[9];
};

	static const struct mem_param speed[] = {
		{
			.name	    = "200MHz",
			.cycle_time = 0x500,
			.divisor    = 200, // how many 1/40ns per clock
			.dch_memclk = DCH_MemClkFreq_200MHz, //0
			.TrwtTO	    = 7,
			.Twrrd	    = 2,
			.Twrwr	    = 2,
			.Trdrd	    = 3,
			.DcqByPassMax = 4,

		},
		{
			.name	    = "266MHz",
			.cycle_time = 0x375,
			.divisor    = 150, //????
			.dch_memclk = DCH_MemClkFreq_266MHz, //1
			.TrwtTO     = 7,
			.Twrrd      = 2,
			.Twrwr      = 2,
			.Trdrd      = 3,
			.DcqByPassMax = 4,
		},
		 {
			.name       = "333MHz",
			.cycle_time = 0x300,
			.divisor    = 120,
			.dch_memclk = DCH_MemClkFreq_333MHz, //2
			.TrwtTO     = 7,
			.Twrrd      = 2,
			.Twrwr      = 2,
			.Trdrd      = 3,
			.DcqByPassMax = 4,

		 },
		{
			.name	    = "400MHz",
			.cycle_time = 0x250,
			.divisor    = 100,
			.dch_memclk = DCH_MemClkFreq_400MHz,//3
			.TrwtTO     = 7,
			.Twrrd      = 2,
			.Twrwr      = 2,
			.Trdrd      = 3,
			.DcqByPassMax = 4,
		},
		{
			.cycle_time = 0x000,
		},
	};

static const struct mem_param *get_mem_param(unsigned min_cycle_time)
{

	const struct mem_param *param;
	for (param = &speed[0]; param->cycle_time ; param++) {
		if (min_cycle_time > (param+1)->cycle_time) {
			break;
		}
	}
	if (!param->cycle_time) {
		die("min_cycle_time to low");
	}
	printk(BIOS_SPEW, "%s\n", param->name);
	return param;
}

static uint8_t get_exact_divisor(int i, uint8_t divisor)
{
	//input divisor could be 200(200), 150(266), 120(333), 100 (400)
	static const uint8_t dv_a[] = {
	       /* 200  266  333  400 */
	 /*4 */	  250, 250, 250, 250,
	 /*5 */   200, 200, 200, 100,
	 /*6 */   200, 166, 166, 100,
	 /*7 */   200, 171, 142, 100,

	  /*8 */   200, 150, 125, 100,
	  /*9 */   200, 156, 133, 100,
	  /*10*/   200, 160, 120, 100,
	  /*11*/   200, 163, 127, 100,

	  /*12*/   200, 150, 133, 100,
	  /*13*/   200, 153, 123, 100,
	  /*14*/   200, 157, 128, 100,
	  /*15*/   200, 160, 120, 100,
	};


	int index;
	msr_t msr;

	/* Check for FID control support */
	struct cpuid_result cpuid1;
	cpuid1 = cpuid(0x80000007);
	if( cpuid1.edx & 0x02 ) {
		/* Use current FID */
		unsigned fid_cur;
		msr = rdmsr(0xc0010042);
		fid_cur = msr.lo & 0x3f;

		index = fid_cur>>1;
	} else {
		/* Use startup FID */
		unsigned fid_start;
		msr = rdmsr(0xc0010015);
		fid_start = (msr.lo & (0x3f << 24));

		index = fid_start>>25;
	}

	if (index>12) return divisor;

	if (i>3) return divisor;

	return dv_a[index * 4+i];

}


struct spd_set_memclk_result {
	const struct mem_param *param;
	long dimm_mask;
};


static unsigned convert_to_linear(unsigned value)
{
	static const unsigned fraction[] = { 0x25, 0x33, 0x66, 0x75 };
	unsigned valuex;

	/* We need to convert value to more readable */
	if ((value & 0xf) < 10) { //no .25, .33, .66, .75
		value <<= 4;
	} else {
		valuex = ((value & 0xf0) << 4) | fraction [(value & 0xf)-10];
		value = valuex;
	}
	return value;
}

static const uint8_t latency_indicies[] = { 25, 23, 9 };

static int find_optimum_spd_latency(u32 spd_device, unsigned *min_latency, unsigned *min_cycle_time)
{
	int new_cycle_time, new_latency;
	int index;
	int latencies;
	int latency;

	/* First find the supported CAS latencies
	 * Byte 18 for DDR SDRAM is interpreted:
	 * bit 3 == CAS Latency = 3
	 * bit 4 == CAS Latency = 4
	 * bit 5 == CAS Latency = 5
	 * bit 6 == CAS Latency = 6
	 */
	new_cycle_time = 0x500;
	new_latency = 6;

	latencies = spd_read_byte(spd_device, SPD_CAS_LAT);
	if (latencies <= 0)
		return 1;

	printk_raminit("\tlatencies: %08x\n", latencies);
	/* Compute the lowest cas latency which can be expressed in this
	 * particular SPD EEPROM. You can store at most settings for 3
	 * contiguous CAS latencies, so by taking the highest CAS
	 * latency maked as supported in the SPD and subtracting 2 you
	 * get the lowest expressable CAS latency. That latency is not
	 * necessarily supported, but a (maybe invalid) entry exists
	 * for it.
	 */
	latency = log2(latencies) - 2;

	/* Loop through and find a fast clock with a low latency */
	for (index = 0; index < 3; index++, latency++) {
		int value;
		if ((latency < 3) || (latency > 6) ||
			(!(latencies & (1 << latency)))) {
			continue;
		}
		value = spd_read_byte(spd_device, latency_indicies[index]);
		if (value < 0) {
			return -1;
		}

		printk_raminit("\tindex: %08x\n", index);
		printk_raminit("\t\tlatency: %08x\n", latency);
		printk_raminit("\t\tvalue1: %08x\n", value);

		value = convert_to_linear(value);

		printk_raminit("\t\tvalue2: %08x\n", value);

		/* Only increase the latency if we decrease the clock */
		if (value >= *min_cycle_time ) {
			if (value < new_cycle_time) {
				new_cycle_time = value;
				new_latency = latency;
			} else if (value == new_cycle_time) {
				if (new_latency > latency) {
					new_latency = latency;
				}
			}
		}
		printk_raminit("\t\tnew_cycle_time: %08x\n", new_cycle_time);
		printk_raminit("\t\tnew_latency: %08x\n", new_latency);

	}

	if (new_latency > 6){
		return 1;
	}

	/* Does min_latency need to be increased? */
	if (new_cycle_time > *min_cycle_time) {
		*min_cycle_time = new_cycle_time;
	}

	/* Does min_cycle_time need to be increased? */
	if (new_latency > *min_latency) {
		*min_latency = new_latency;
	}

	printk_raminit("2 min_cycle_time: %08x\n", *min_cycle_time);
	printk_raminit("2 min_latency: %08x\n", *min_latency);

	return 0;
}

static struct spd_set_memclk_result spd_set_memclk(const struct mem_controller *ctrl, struct mem_info *meminfo)
{
	/* Compute the minimum cycle time for these dimms */
	struct spd_set_memclk_result result;
	unsigned min_cycle_time, min_latency, bios_cycle_time;
	int i;
	uint32_t value;

	static const uint16_t min_cycle_times[] = { // use full speed to compare
		[NBCAP_MEMCLK_NOLIMIT] = 0x250, /*2.5ns */
		[NBCAP_MEMCLK_333MHZ] = 0x300, /* 3.0ns */
		[NBCAP_MEMCLK_266MHZ] = 0x375, /* 3.75ns */
		[NBCAP_MEMCLK_200MHZ] = 0x500, /* 5.0s */
	};


	value = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP);
	min_cycle_time = min_cycle_times[(value >> NBCAP_MEMCLK_SHIFT) & NBCAP_MEMCLK_MASK];
	bios_cycle_time = min_cycle_times[
		read_option(CMOS_VSTART_max_mem_clock, CMOS_VLEN_max_mem_clock, 0)];
	if (bios_cycle_time > min_cycle_time) {
		min_cycle_time = bios_cycle_time;
	}
	min_latency = 3;

	printk_raminit("1 min_cycle_time: %08x\n", min_cycle_time);

	/* Compute the least latency with the fastest clock supported
	 * by both the memory controller and the dimms.
	 */
	for (i = 0; i < DIMM_SOCKETS; i++) {
		u32 spd_device;

		printk_raminit("1.1 dimm_mask: %08x\n", meminfo->dimm_mask);
		printk_raminit("i: %08x\n",i);

		if (meminfo->dimm_mask & (1 << i)) {
			spd_device = ctrl->channel0[i];
			printk_raminit("Channel 0 settings:\n");

			switch (find_optimum_spd_latency(spd_device, &min_latency, &min_cycle_time)) {
			case -1:
				goto hw_error;
				break;
			case 1:
				continue;
			}
		}
		if (meminfo->dimm_mask & (1 << (DIMM_SOCKETS + i))) {
			spd_device = ctrl->channel1[i];
			printk_raminit("Channel 1 settings:\n");

			switch (find_optimum_spd_latency(spd_device, &min_latency, &min_cycle_time)) {
			case -1:
				goto hw_error;
				break;
			case 1:
				continue;
			}
		}

	}
	/* Make a second pass through the dimms and disable
	 * any that cannot support the selected memclk and cas latency.
	 */

	printk_raminit("3 min_cycle_time: %08x\n", min_cycle_time);
	printk_raminit("3 min_latency: %08x\n", min_latency);

	for (i = 0; (i < DIMM_SOCKETS); i++) {
		int latencies;
		int latency;
		int index;
		int val;
		u32 spd_device = ctrl->channel0[i];

		if (!(meminfo->dimm_mask & (1 << i))) {
			if (meminfo->dimm_mask & (1 << (DIMM_SOCKETS + i))) { /* channelB only? */
				spd_device = ctrl->channel1[i];
			} else {
				continue;
			}
		}

		latencies = spd_read_byte(spd_device, SPD_CAS_LAT);
		if (latencies < 0) goto hw_error;
		if (latencies == 0) {
			continue;
		}

		/* Compute the lowest cas latency supported */
		latency = log2(latencies) -2;

		/* Walk through searching for the selected latency */
		for (index = 0; index < 3; index++, latency++) {
			if (!(latencies & (1 << latency))) {
				continue;
			}
			if (latency == min_latency)
				break;
		}
		/* If I can't find the latency or my index is bad error */
		if ((latency != min_latency) || (index >= 3)) {
			goto dimm_err;
		}

		/* Read the min_cycle_time for this latency */
		val = spd_read_byte(spd_device, latency_indicies[index]);
		if (val < 0) goto hw_error;

		val = convert_to_linear(val);
		/* All is good if the selected clock speed
		 * is what I need or slower.
		 */
		if (val <= min_cycle_time) {
			continue;
		}
		/* Otherwise I have an error, disable the dimm */
	dimm_err:
		meminfo->dimm_mask = disable_dimm(ctrl, i, meminfo);
	}

	printk_raminit("4 min_cycle_time: %08x\n", min_cycle_time);

	/* Now that I know the minimum cycle time lookup the memory parameters */
	result.param = get_mem_param(min_cycle_time);

	/* Update DRAM Config High with our selected memory speed */
	value = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH);
	value &= ~(DCH_MemClkFreq_MASK << DCH_MemClkFreq_SHIFT);

	value |= result.param->dch_memclk << DCH_MemClkFreq_SHIFT;
	pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, value);

	printk(BIOS_DEBUG, "%s\n", result.param->name);

	/* Update DRAM Timing Low with our selected cas latency */
	value = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
	value &= ~(DTL_TCL_MASK << DTL_TCL_SHIFT);
	value |= (min_latency - DTL_TCL_BASE)  << DTL_TCL_SHIFT;
	pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, value);

	result.dimm_mask = meminfo->dimm_mask;
	return result;
 hw_error:
	result.param = (const struct mem_param *)0;
	result.dimm_mask = -1;
	return result;
}

static unsigned convert_to_1_4(unsigned value)
{
	static const uint8_t fraction[] = { 0, 1, 2, 2, 3, 3, 0 };
	unsigned valuex;

	/* We need to convert value to more readable */
	valuex =  fraction [value & 0x7];
	return valuex;
}

static int get_dimm_Trc_clocks(u32 spd_device, const struct mem_param *param)
{
	int value;
	int value2;
	int clocks;
	value = spd_read_byte(spd_device, SPD_TRC);
	if (value < 0)
		return -1;
	printk_raminit("update_dimm_Trc: tRC (41) = %08x\n", value);

	value2 = spd_read_byte(spd_device, SPD_TRC -1);
	value <<= 2;
	value += convert_to_1_4(value2>>4);

	value *= 10;
	printk_raminit("update_dimm_Trc: tRC final value = %i\n", value);

	clocks = (value + param->divisor - 1)/param->divisor;
	printk_raminit("update_dimm_Trc: clocks = %i\n", clocks);

	if (clocks < DTL_TRC_MIN) {
		// We might want to die here instead or (at least|better) disable this bank.
		printk(BIOS_NOTICE, "update_dimm_Trc: Can't refresh fast enough, "
			"want %i clocks, minimum is %i clocks.\n", clocks, DTL_TRC_MIN);
		clocks = DTL_TRC_MIN;
	}
	return clocks;
}

static int update_dimm_Trc(const struct mem_controller *ctrl,
			    const struct mem_param *param,
			    int i, long dimm_mask)
{
	int clocks, old_clocks;
	uint32_t dtl;
	u32 spd_device = ctrl->channel0[i];

	if (!(dimm_mask & (1 << i)) && (dimm_mask & (1 << (DIMM_SOCKETS + i)))) { /* channelB only? */
		spd_device = ctrl->channel1[i];
	}

	clocks = get_dimm_Trc_clocks(spd_device, param);
	if (clocks == -1)
		return clocks;
	if (clocks > DTL_TRC_MAX) {
		return 0;
	}
	printk_raminit("update_dimm_Trc: clocks after adjustment = %i\n", clocks);

	dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
	old_clocks = ((dtl >> DTL_TRC_SHIFT) & DTL_TRC_MASK) + DTL_TRC_BASE;
	if (old_clocks >= clocks) {  //?? someone did it
		// clocks = old_clocks;
		return 1;
	}
	dtl &= ~(DTL_TRC_MASK << DTL_TRC_SHIFT);
	dtl |=	((clocks - DTL_TRC_BASE) << DTL_TRC_SHIFT);
	pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl);
	return 1;
}

static int update_dimm_Trfc(const struct mem_controller *ctrl, const struct mem_param *param, int i, struct mem_info *meminfo)
{
	unsigned clocks, old_clocks;
	uint32_t dth;
	int value;
	u8 ch_b = 0;
	u32 spd_device = ctrl->channel0[i];

	if (!(meminfo->dimm_mask & (1 << i)) && (meminfo->dimm_mask & (1 << (DIMM_SOCKETS + i)))) { /* channelB only? */
		spd_device = ctrl->channel1[i];
		ch_b = 2; /* offset to channelB trfc setting */
	}

	//get the cs_size --> logic dimm size
	value = spd_read_byte(spd_device, SPD_PRI_WIDTH);
	if (value < 0) {
		return -1;
	}

	value = 6 - log2(value); //4-->4, 8-->3, 16-->2

	clocks = meminfo->sz[i].per_rank - 27 + 2 - value;

	dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH);

	old_clocks = ((dth >> (DTH_TRFC0_SHIFT + ((i + ch_b) * 3))) & DTH_TRFC_MASK);

	if (old_clocks >= clocks) { // some one did it?
		return 1;
	}
	dth &= ~(DTH_TRFC_MASK << (DTH_TRFC0_SHIFT + ((i + ch_b) * 3)));
	dth |= clocks  << (DTH_TRFC0_SHIFT + ((i + ch_b) * 3));
	pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth);
	return 1;
}

static int update_dimm_TT_1_4(const struct mem_controller *ctrl, const struct mem_param *param, int i, long dimm_mask,
					unsigned TT_REG,
					unsigned SPD_TT, unsigned TT_SHIFT, unsigned TT_MASK, unsigned TT_BASE, unsigned TT_MIN, unsigned TT_MAX )
{
	unsigned clocks, old_clocks;
	uint32_t dtl;
	int value;
	u32 spd_device = ctrl->channel0[i];

	if (!(dimm_mask & (1 << i)) && (dimm_mask & (1 << (DIMM_SOCKETS + i)))) { /* channelB only? */
		spd_device = ctrl->channel1[i];
	}

	value = spd_read_byte(spd_device, SPD_TT); //already in 1/4 ns
	if (value < 0) return -1;
	value *=10;
	clocks = (value + param->divisor -1)/param->divisor;
	if (clocks < TT_MIN) {
		clocks = TT_MIN;
	}

	if (clocks > TT_MAX) {
		printk(BIOS_INFO, "warning spd byte : %x = %x > TT_MAX: %x, setting TT_MAX", SPD_TT, value, TT_MAX);
		clocks = TT_MAX;
	}

	dtl = pci_read_config32(ctrl->f2, TT_REG);

	old_clocks = ((dtl >> TT_SHIFT) & TT_MASK) + TT_BASE;
	if (old_clocks >= clocks) { //some one did it?
//		clocks = old_clocks;
		return 1;
	}
	dtl &= ~(TT_MASK << TT_SHIFT);
	dtl |= ((clocks - TT_BASE) << TT_SHIFT);
	pci_write_config32(ctrl->f2, TT_REG, dtl);
	return 1;
}

static int update_dimm_Trcd(const struct mem_controller *ctrl,
			     const struct mem_param *param, int i, long dimm_mask)
{
	return update_dimm_TT_1_4(ctrl, param, i, dimm_mask, DRAM_TIMING_LOW, SPD_TRCD, DTL_TRCD_SHIFT, DTL_TRCD_MASK, DTL_TRCD_BASE, DTL_TRCD_MIN, DTL_TRCD_MAX);
}

static int update_dimm_Trrd(const struct mem_controller *ctrl, const struct mem_param *param, int i, long dimm_mask)
{
	return update_dimm_TT_1_4(ctrl, param, i, dimm_mask, DRAM_TIMING_LOW, SPD_TRRD, DTL_TRRD_SHIFT, DTL_TRRD_MASK, DTL_TRRD_BASE, DTL_TRRD_MIN, DTL_TRRD_MAX);
}

static int update_dimm_Tras(const struct mem_controller *ctrl, const struct mem_param *param, int i, long dimm_mask)
{
	unsigned clocks, old_clocks;
	uint32_t dtl;
	int value;
	u32 spd_device = ctrl->channel0[i];

	if (!(dimm_mask & (1 << i)) && (dimm_mask & (1 << (DIMM_SOCKETS + i)))) { /* channelB only? */
		spd_device = ctrl->channel1[i];
	}

	value = spd_read_byte(spd_device, SPD_TRAS); //in 1 ns
	if (value < 0) return -1;
	printk_raminit("update_dimm_Tras: 0 value= %08x\n", value);

	value <<= 2; //convert it to in 1/4ns

	value *= 10;
	printk_raminit("update_dimm_Tras:  1 value= %08x\n", value);

	clocks = (value  + param->divisor - 1)/param->divisor;
	printk_raminit("update_dimm_Tras: divisor= %08x\n", param->divisor);
	printk_raminit("update_dimm_Tras: clocks= %08x\n", clocks);
	if (clocks < DTL_TRAS_MIN) {
		clocks = DTL_TRAS_MIN;
	}
	if (clocks > DTL_TRAS_MAX) {
		return 0;
	}
	dtl = pci_read_config32(ctrl->f2, DRAM_TIMING_LOW);
	old_clocks = ((dtl >> DTL_TRAS_SHIFT) & DTL_TRAS_MASK) + DTL_TRAS_BASE;
	if (old_clocks >= clocks) { // someone did it?
		return 1;
	}
	dtl &= ~(DTL_TRAS_MASK << DTL_TRAS_SHIFT);
	dtl |= ((clocks - DTL_TRAS_BASE) << DTL_TRAS_SHIFT);
	pci_write_config32(ctrl->f2, DRAM_TIMING_LOW, dtl);
	return 1;
}

static int update_dimm_Trp(const struct mem_controller *ctrl,
			    const struct mem_param *param, int i, long dimm_mask)
{
	return update_dimm_TT_1_4(ctrl, param, i, dimm_mask, DRAM_TIMING_LOW, SPD_TRP, DTL_TRP_SHIFT, DTL_TRP_MASK, DTL_TRP_BASE, DTL_TRP_MIN, DTL_TRP_MAX);
}


static int update_dimm_Trtp(const struct mem_controller *ctrl,
		const struct mem_param *param, int i, struct mem_info *meminfo)
{
	/* need to figure if it is 32 byte burst or 64 bytes burst */
	int offset = 2;
	if (!meminfo->is_Width128) {
		uint32_t dword;
		dword = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
		if ((dword &  DCL_BurstLength32)) offset = 0;
	}
	return update_dimm_TT_1_4(ctrl, param, i, meminfo->dimm_mask, DRAM_TIMING_LOW, SPD_TRTP, DTL_TRTP_SHIFT, DTL_TRTP_MASK, DTL_TRTP_BASE+offset, DTL_TRTP_MIN+offset, DTL_TRTP_MAX+offset);
}


static int update_dimm_Twr(const struct mem_controller *ctrl, const struct mem_param *param, int i, long dimm_mask)
{
	return update_dimm_TT_1_4(ctrl, param, i, dimm_mask, DRAM_TIMING_LOW, SPD_TWR, DTL_TWR_SHIFT, DTL_TWR_MASK, DTL_TWR_BASE, DTL_TWR_MIN, DTL_TWR_MAX);
}


static int update_dimm_Tref(const struct mem_controller *ctrl,
			     const struct mem_param *param, int i, long dimm_mask)
{
	uint32_t dth, dth_old;
	int value;
	u32 spd_device = ctrl->channel0[i];

	if (!(dimm_mask & (1 << i)) && (dimm_mask & (1 << (DIMM_SOCKETS + i)))) { /* channelB only? */
		spd_device = ctrl->channel1[i];
	}

	value = spd_read_byte(spd_device, SPD_TREF); // 0: 15.625us, 1: 3.9us 2: 7.8 us....
	if (value < 0) return -1;

	if (value == 1 ) {
		value = 3;
	} else {
		value = 2;
	}

	dth = pci_read_config32(ctrl->f2, DRAM_TIMING_HIGH);

	dth_old = dth;
	dth &= ~(DTH_TREF_MASK << DTH_TREF_SHIFT);
	dth |= (value << DTH_TREF_SHIFT);
	if (dth_old != dth) {
		pci_write_config32(ctrl->f2, DRAM_TIMING_HIGH, dth);
	}
	return 1;
}

static void set_4RankRDimm(const struct mem_controller *ctrl,
			const struct mem_param *param, struct mem_info *meminfo)
{
#if CONFIG_QRANK_DIMM_SUPPORT
	int value;
	int i;
	long dimm_mask = meminfo->dimm_mask;


	if (!(meminfo->is_registered)) return;

	value = 0;

	for (i = 0; i < DIMM_SOCKETS; i++) {
		if (!(dimm_mask & (1 << i))) {
			continue;
		}

		if (meminfo->sz[i].rank == 4) {
			value = 1;
			break;
		}
	}

	if (value == 1) {
		uint32_t dch;
		dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH);
		dch |= DCH_FourRankRDimm;
		pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch);
	}
#endif
}

static uint32_t get_extra_dimm_mask(const struct mem_controller *ctrl,
				     struct mem_info *meminfo)
{
	int i;

	uint32_t mask_x4;
	uint32_t mask_x16;
	uint32_t mask_single_rank;
	uint32_t mask_page_1k;
	int value;
#if CONFIG_QRANK_DIMM_SUPPORT
	int rank;
#endif

	long dimm_mask = meminfo->dimm_mask;


	mask_x4 = 0;
	mask_x16 = 0;
	mask_single_rank = 0;
	mask_page_1k = 0;

	for (i = 0; i < DIMM_SOCKETS; i++) {
		u32 spd_device = ctrl->channel0[i];
		if (!(dimm_mask & (1 << i))) {
			if (dimm_mask & (1 << (DIMM_SOCKETS + i))) { /* channelB only? */
				spd_device = ctrl->channel1[i];
			} else {
				continue;
			}
		}

		if (meminfo->sz[i].rank == 1) {
			mask_single_rank |= 1<<i;
		}

		if (meminfo->sz[i].col==10) {
			mask_page_1k |= 1<<i;
		}


		value = spd_read_byte(spd_device, SPD_PRI_WIDTH);

		#if CONFIG_QRANK_DIMM_SUPPORT
			rank = meminfo->sz[i].rank;
		#endif

		if (value==4) {
			mask_x4 |= (1<<i);
			#if CONFIG_QRANK_DIMM_SUPPORT
			if (rank==4) {
				mask_x4 |= 1<<(i+2);
			}
			#endif
		} else if (value==16) {
			mask_x16 |= (1<<i);
			#if CONFIG_QRANK_DIMM_SUPPORT
			 if (rank==4) {
				 mask_x16 |= 1<<(i+2);
			 }
			#endif
		}

	}

	meminfo->x4_mask= mask_x4;
	meminfo->x16_mask = mask_x16;

	meminfo->single_rank_mask = mask_single_rank;
	meminfo->page_1k_mask = mask_page_1k;

	return mask_x4;

}


static void set_dimm_x4(const struct mem_controller *ctrl, const struct mem_param *param, struct mem_info *meminfo)
{
	uint32_t dcl;
	dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
	dcl &= ~(DCL_X4Dimm_MASK<<DCL_X4Dimm_SHIFT);
	dcl |= ((meminfo->x4_mask) & 0xf) << (DCL_X4Dimm_SHIFT);
	pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl);
}


static int count_ones(uint32_t dimm_mask)
{
	int dimms;
	unsigned index;
	dimms = 0;
	for (index = 0; index < (2 * DIMM_SOCKETS); index++, dimm_mask >>= 1) {
		if (dimm_mask & 1) {
			dimms++;
		}
	}
	return dimms;
}


static void set_DramTerm(const struct mem_controller *ctrl,
			const struct mem_param *param, struct mem_info *meminfo)
{
	uint32_t dcl;
	unsigned odt;
	odt = 1; // 75 ohms

	if (param->divisor == 100) { //DDR2 800
		if (meminfo->is_Width128) {
			if (count_ones(meminfo->dimm_mask & 0x0f)==2) {
				odt = 3;  //50 ohms
			}
		}

	}


#if CONFIG_DIMM_SUPPORT == 0x0204
	odt = 0x2;		/* 150 ohms */
#endif

	dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
	dcl &= ~(DCL_DramTerm_MASK<<DCL_DramTerm_SHIFT);
	dcl |= (odt & DCL_DramTerm_MASK) << (DCL_DramTerm_SHIFT);
	pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl);
}

static void set_ecc(const struct mem_controller *ctrl,
	const struct mem_param *param, struct mem_info *meminfo)
{
	int i;
	int value;

	uint32_t dcl, nbcap;
	nbcap = pci_read_config32(ctrl->f3, NORTHBRIDGE_CAP);
	dcl = pci_read_config32(ctrl->f2, DRAM_CONFIG_LOW);
	dcl &= ~DCL_DimmEccEn;
	if (nbcap & NBCAP_ECC) {
		dcl |= DCL_DimmEccEn;
	}
	if (read_option(CMOS_VSTART_ECC_memory, CMOS_VLEN_ECC_memory, 1) == 0) {
		dcl &= ~DCL_DimmEccEn;
	}
	pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl);

	meminfo->is_ecc = 1;
	if (!(dcl & DCL_DimmEccEn)) {
		meminfo->is_ecc = 0;
		return; // already disabled the ECC, so don't need to read SPD any more
	}

	for (i = 0; i < DIMM_SOCKETS; i++) {
		u32 spd_device = ctrl->channel0[i];
		if (!(meminfo->dimm_mask & (1 << i))) {
			if (meminfo->dimm_mask & (1 << (DIMM_SOCKETS + i))) { /* channelB only? */
				spd_device = ctrl->channel1[i];
				printk(BIOS_DEBUG, "set_ecc spd_device: 0x%x\n", spd_device);
			} else {
				continue;
			}
		}

		value = spd_read_byte(ctrl->channel0[i], SPD_DIMM_CONF_TYPE);

		if (!(value & SPD_DIMM_CONF_TYPE_ECC)) {
			dcl &= ~DCL_DimmEccEn;
			pci_write_config32(ctrl->f2, DRAM_CONFIG_LOW, dcl);
			meminfo->is_ecc = 0;
			return;
		}

	}
}


static int update_dimm_Twtr(const struct mem_controller *ctrl,
			     const struct mem_param *param, int i, long dimm_mask)
{
	return update_dimm_TT_1_4(ctrl, param, i, dimm_mask, DRAM_TIMING_HIGH, SPD_TWTR, DTH_TWTR_SHIFT, DTH_TWTR_MASK, DTH_TWTR_BASE, DTH_TWTR_MIN, DTH_TWTR_MAX);
}

static void set_TT(const struct mem_controller *ctrl,
	const struct mem_param *param, unsigned TT_REG, unsigned TT_SHIFT,
	unsigned TT_MASK, unsigned TT_BASE, unsigned TT_MIN, unsigned TT_MAX,
	unsigned val, const char *str)
{
	uint32_t reg;

	if ((val < TT_MIN) || (val > TT_MAX)) {
		printk(BIOS_ERR, "%s", str);
		die(" Unknown\n");
	}

	reg = pci_read_config32(ctrl->f2, TT_REG);
	reg &= ~(TT_MASK << TT_SHIFT);
	reg |= ((val - TT_BASE) << TT_SHIFT);
	pci_write_config32(ctrl->f2, TT_REG, reg);
	return;
}


static void set_TrwtTO(const struct mem_controller *ctrl,
			const struct mem_param *param)
{
	set_TT(ctrl, param, DRAM_TIMING_HIGH, DTH_TRWTTO_SHIFT, DTH_TRWTTO_MASK,DTH_TRWTTO_BASE, DTH_TRWTTO_MIN, DTH_TRWTTO_MAX, param->TrwtTO, "TrwtTO");
}


static void set_Twrrd(const struct mem_controller *ctrl, const struct mem_param *param)
{
	set_TT(ctrl, param, DRAM_TIMING_HIGH, DTH_TWRRD_SHIFT, DTH_TWRRD_MASK,DTH_TWRRD_BASE, DTH_TWRRD_MIN, DTH_TWRRD_MAX, param->Twrrd, "Twrrd");
}


static void set_Twrwr(const struct mem_controller *ctrl, const struct mem_param *param)
{
	set_TT(ctrl, param, DRAM_TIMING_HIGH, DTH_TWRWR_SHIFT, DTH_TWRWR_MASK,DTH_TWRWR_BASE, DTH_TWRWR_MIN, DTH_TWRWR_MAX, param->Twrwr, "Twrwr");
}

static void set_Trdrd(const struct mem_controller *ctrl, const struct mem_param *param)
{
	set_TT(ctrl, param, DRAM_TIMING_HIGH, DTH_TRDRD_SHIFT, DTH_TRDRD_MASK,DTH_TRDRD_BASE, DTH_TRDRD_MIN, DTH_TRDRD_MAX, param->Trdrd, "Trdrd");
}

static void set_DcqBypassMax(const struct mem_controller *ctrl, const struct mem_param *param)
{
	set_TT(ctrl, param, DRAM_CONFIG_HIGH, DCH_DcqBypassMax_SHIFT, DCH_DcqBypassMax_MASK,DCH_DcqBypassMax_BASE, DCH_DcqBypassMax_MIN, DCH_DcqBypassMax_MAX, param->DcqByPassMax, "DcqBypassMax"); // value need to be in CMOS
}

static void set_Tfaw(const struct mem_controller *ctrl, const struct mem_param *param, struct mem_info *meminfo)
{
	static const uint8_t faw_1k[] = {8, 10, 13, 14};
	static const uint8_t faw_2k[] = {10, 14, 17, 18};
	unsigned memclkfreq_index;
	unsigned faw;


	memclkfreq_index = param->dch_memclk;

	if (meminfo->page_1k_mask != 0) { //1k page
		faw = faw_1k[memclkfreq_index];
	} else {
		faw = faw_2k[memclkfreq_index];
	}

	set_TT(ctrl, param, DRAM_CONFIG_HIGH, DCH_FourActWindow_SHIFT, DCH_FourActWindow_MASK, DCH_FourActWindow_BASE, DCH_FourActWindow_MIN, DCH_FourActWindow_MAX, faw, "FourActWindow");
}

static void set_max_async_latency(const struct mem_controller *ctrl, const struct mem_param *param)
{
	uint32_t dch;
	unsigned async_lat;


	dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH);
	dch &= ~(DCH_MaxAsyncLat_MASK << DCH_MaxAsyncLat_SHIFT);

	//FIXME: We need to use Max of DqsRcvEnDelay + 6ns here: After trainning and get that from index reg 0x10, 0x13, 0x16, 0x19, 0x30, 0x33, 0x36, 0x39
	async_lat = 6 + 6;


	dch |= ((async_lat - DCH_MaxAsyncLat_BASE) << DCH_MaxAsyncLat_SHIFT);
	pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch);
}

#if (CONFIG_DIMM_SUPPORT & 0x0100)==0x0000 /* 2T mode only used for unbuffered DIMM */
static void set_SlowAccessMode(const struct mem_controller *ctrl)
{
	uint32_t dch;

	dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH);

	dch |= (1<<20);

	pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch);
}
#endif

/*
	DRAM_OUTPUT_DRV_COMP_CTRL 0, 0x20
	DRAM_ADDR_TIMING_CTRL 04, 0x24
*/
static void set_misc_timing(const struct mem_controller *ctrl, struct mem_info *meminfo)
{
	uint32_t dword;
	uint32_t dwordx;
#if (CONFIG_DIMM_SUPPORT & 0x0100)==0x0000 /* 2T mode only used for unbuffered DIMM */
	unsigned SlowAccessMode = 0;
#endif

#if CONFIG_DIMM_SUPPORT==0x0104   /* DDR2 and REG */
	long dimm_mask = meminfo->dimm_mask & 0x0f;
	/* for REG DIMM */
	dword = 0x00111222;
	dwordx = 0x002f0000;
	switch (meminfo->memclk_set) {
	case DCH_MemClkFreq_266MHz:
		if ( (dimm_mask == 0x03) || (dimm_mask == 0x02) || (dimm_mask == 0x01)) {
			dwordx = 0x002f2700;
		}
		break;
	case DCH_MemClkFreq_333MHz:
		if ( (dimm_mask == 0x03) || (dimm_mask == 0x02) || (dimm_mask == 0x01)) {
			if ((meminfo->single_rank_mask & 0x03)!=0x03) { //any double rank there?
				dwordx = 0x002f2f00;
			}
		}
		break;
	case DCH_MemClkFreq_400MHz:
		dwordx = 0x002f3300;
		break;
	}

#endif

#if CONFIG_DIMM_SUPPORT==0x0204	/* DDR2 and SO-DIMM, S1G1 */
	dword = 0x00111222;
	dwordx = 0x002F2F00;

	switch (meminfo->memclk_set) {
	case DCH_MemClkFreq_200MHz:	/* nothing to be set here */
		break;
	case DCH_MemClkFreq_266MHz:
		if ((meminfo->single_rank_mask == 0)
		    && (meminfo->x4_mask == 0) && (meminfo->x16_mask))
			dwordx = 0x002C2C00;	/* Double rank x8 */
		/* else SRx16, SRx8, DRx16 == 0x002F2F00 */
		break;
	case DCH_MemClkFreq_333MHz:
		if ((meminfo->single_rank_mask == 1)
		   && (meminfo->x16_mask == 1))	/* SR x16 */
			dwordx = 0x00272700;
		else if ((meminfo->x4_mask == 0) && (meminfo->x16_mask == 0)
			 && (meminfo->single_rank_mask == 0)) {	/* DR x8 */
			SlowAccessMode = 1;
			dwordx = 0x00002800;
		} else {	/* SR x8, DR x16 */
			dwordx = 0x002A2A00;
		}
		break;
	case DCH_MemClkFreq_400MHz:
		if ((meminfo->single_rank_mask == 1)
		   && (meminfo->x16_mask == 1))	/* SR x16 */
			dwordx = 0x00292900;
		else if ((meminfo->x4_mask == 0) && (meminfo->x16_mask == 0)
			 && (meminfo->single_rank_mask == 0)) {	/* DR x8 */
			SlowAccessMode = 1;
			dwordx = 0x00002A00;
		} else {	/* SR x8, DR x16 */
			dwordx = 0x002A2A00;
		}
		break;
	}
#endif

#if CONFIG_DIMM_SUPPORT==0x0004  /* DDR2 and unbuffered */
	long dimm_mask = meminfo->dimm_mask & 0x0f;
	/* for UNBUF DIMM */
	dword = 0x00111222;
	dwordx = 0x002f2f00;
	switch (meminfo->memclk_set) {
	case DCH_MemClkFreq_200MHz:
		if (dimm_mask == 0x03) {
			SlowAccessMode = 1;
			dword = 0x00111322;
		}
		break;
	case DCH_MemClkFreq_266MHz:
		if (dimm_mask == 0x03) {
			SlowAccessMode = 1;
			dword = 0x00111322;
			if ((meminfo->x4_mask == 0 ) && (meminfo->x16_mask == 0)) {
				switch (meminfo->single_rank_mask) {
				case 0x03:
					dwordx = 0x00002f00; //x8 single Rank
					break;
				case 0x00:
					dwordx = 0x00342f00; //x8 double Rank
					break;
				default:
					dwordx = 0x00372f00; //x8 single Rank and double Rank mixed
				}
			} else if ((meminfo->x4_mask == 0 ) && (meminfo->x16_mask == 0x01) && (meminfo->single_rank_mask == 0x01)) {
					 dwordx = 0x00382f00; //x8 Double Rank and x16 single Rank mixed
			 } else if ((meminfo->x4_mask == 0 ) && (meminfo->x16_mask == 0x02) && (meminfo->single_rank_mask == 0x02)) {
					 dwordx = 0x00382f00; //x16 single Rank and x8 double Rank mixed
			}

		} else {
			if ((meminfo->x4_mask == 0 ) && (meminfo->x16_mask == 0x00) && ((meminfo->single_rank_mask == 0x01)||(meminfo->single_rank_mask == 0x02)))  { //x8 single rank
				dwordx = 0x002f2f00;
			} else {
				dwordx = 0x002b2f00;
			}
		}
		break;
	case DCH_MemClkFreq_333MHz:
		dwordx = 0x00202220;
		if (dimm_mask == 0x03) {
			SlowAccessMode = 1;
			dword = 0x00111322;
			if ((meminfo->x4_mask == 0 ) && (meminfo->x16_mask == 0)) {
				switch (meminfo->single_rank_mask) {
				case 0x03:
					dwordx = 0x00302220; //x8 single Rank
					break;
				case 0x00:
					dwordx = 0x002b2220; //x8 double Rank
					break;
				default:
					dwordx = 0x002a2220; //x8 single Rank and double Rank mixed
				}
			} else if ((meminfo->x4_mask == 0) && (meminfo->x16_mask == 0x01) && (meminfo->single_rank_mask == 0x01)) {
					dwordx = 0x002c2220; //x8 Double Rank and x16 single Rank mixed
			} else if ((meminfo->x4_mask == 0) && (meminfo->x16_mask == 0x02) && (meminfo->single_rank_mask == 0x02)) {
					dwordx = 0x002c2220; //x16 single Rank and x8 double Rank mixed
			}
		}
		break;
	case DCH_MemClkFreq_400MHz:
		dwordx = 0x00202520;
		SlowAccessMode = 1;
		if (dimm_mask == 0x03) {
			dword = 0x00113322;
		} else {
			dword = 0x00113222;
		}
		break;
	}

	printk_raminit("\tdimm_mask = %08x\n", meminfo->dimm_mask);
	printk_raminit("\tx4_mask = %08x\n", meminfo->x4_mask);
	printk_raminit("\tx16_mask = %08x\n", meminfo->x16_mask);
	printk_raminit("\tsingle_rank_mask = %08x\n", meminfo->single_rank_mask);
	printk_raminit("\tODC = %08x\n", dword);
	printk_raminit("\tAddr Timing= %08x\n", dwordx);
#endif

#if (CONFIG_DIMM_SUPPORT & 0x0100)==0x0000 /* 2T mode only used for unbuffered DIMM */
	if (SlowAccessMode) {
		set_SlowAccessMode(ctrl);
	}
#endif

	if (!(meminfo->dimm_mask & 0x0F) && (meminfo->dimm_mask & 0xF0)) { /* channelB only? */
		/* Program the Output Driver Compensation Control Registers (Function 2:Offset 0x9c, index 0, 0x20) */
		pci_write_config32_index_wait(ctrl->f2, 0x98, 0x20, dword);

		/* Program the Address Timing Control Registers (Function 2:Offset 0x9c, index 4, 0x24) */
		pci_write_config32_index_wait(ctrl->f2, 0x98, 0x24, dwordx);
	} else {
		/* Program the Output Driver Compensation Control Registers (Function 2:Offset 0x9c, index 0, 0x20) */
		pci_write_config32_index_wait(ctrl->f2, 0x98, 0, dword);
		if (meminfo->is_Width128) {
			pci_write_config32_index_wait(ctrl->f2, 0x98, 0x20, dword);
		}

		/* Program the Address Timing Control Registers (Function 2:Offset 0x9c, index 4, 0x24) */
		pci_write_config32_index_wait(ctrl->f2, 0x98, 4, dwordx);
		if (meminfo->is_Width128) {
			pci_write_config32_index_wait(ctrl->f2, 0x98, 0x24, dwordx);
		}
	}
}


static void set_RDqsEn(const struct mem_controller *ctrl,
			const struct mem_param *param, struct mem_info *meminfo)
{
#if CONFIG_CPU_SOCKET_TYPE==0x10
	//only need to set for reg and x8
	uint32_t dch;

	dch = pci_read_config32(ctrl->f2, DRAM_CONFIG_HIGH);

	dch &= ~DCH_RDqsEn;
	if ((!meminfo->x4_mask) && (!meminfo->x16_mask)) {
		dch |= DCH_RDqsEn;
	}

	pci_write_config32(ctrl->f2, DRAM_CONFIG_HIGH, dch);
#endif
}

static void set_idle_cycle_limit(const struct mem_controller *ctrl,
				  const struct mem_param *param)
{
	uint32_t dcm;
	/* AMD says to Hardcode this */
	dcm = pci_read_config32(ctrl->f2, DRAM_CTRL_MISC);
	dcm &= ~(DCM_ILD_lmt_MASK << DCM_ILD_lmt_SHIFT);
	dcm |= DCM_ILD_lmt_16 << DCM_ILD_lmt_SHIFT;
	dcm |= DCM_DCC_EN;
	pci_write_config32(ctrl->f2, DRAM_CTRL_MISC, dcm);
}

static void set_RdWrQByp(const struct mem_controller *ctrl,
			  const struct mem_param *param)
{
	set_TT(ctrl, param, DRAM_CTRL_MISC, DCM_RdWrQByp_SHIFT, DCM_RdWrQByp_MASK,0, 0, 3, 2, "RdWrQByp");
}

static long spd_set_dram_timing(const struct mem_controller *ctrl,
				 const struct mem_param *param,
				 struct mem_info *meminfo)
{
	int i;

	for (i = 0; i < DIMM_SOCKETS; i++) {
		int rc;
		if (!(meminfo->dimm_mask & (1 << i)) &&
		    !(meminfo->dimm_mask & (1 << (DIMM_SOCKETS + i))) ) {
			continue;
		}
		printk_raminit("spd_set_dram_timing dimm socket:  %08x\n", i);
		/* DRAM Timing Low Register */
		printk_raminit("\ttrc\n");
		if ((rc = update_dimm_Trc (ctrl, param, i, meminfo->dimm_mask)) <= 0) goto dimm_err;

		printk_raminit("\ttrcd\n");
		if ((rc = update_dimm_Trcd(ctrl, param, i, meminfo->dimm_mask)) <= 0) goto dimm_err;

		printk_raminit("\ttrrd\n");
		if ((rc = update_dimm_Trrd(ctrl, param, i, meminfo->dimm_mask)) <= 0) goto dimm_err;

		printk_raminit("\ttras\n");
		if ((rc = update_dimm_Tras(ctrl, param, i, meminfo->dimm_mask)) <= 0) goto dimm_err;

		printk_raminit("\ttrp\n");
		if ((rc = update_dimm_Trp (ctrl, param, i, meminfo->dimm_mask)) <= 0) goto dimm_err;

		printk_raminit("\ttrtp\n");
		if ((rc = update_dimm_Trtp(ctrl, param, i, meminfo)) <= 0) goto dimm_err;

		printk_raminit("\ttwr\n");
		if ((rc = update_dimm_Twr (ctrl, param, i, meminfo->dimm_mask)) <= 0) goto dimm_err;

		/* DRAM Timing High Register */
		printk_raminit("\ttref\n");
		if ((rc = update_dimm_Tref(ctrl, param, i, meminfo->dimm_mask)) <= 0) goto dimm_err;

		printk_raminit("\ttwtr\n");
		if ((rc = update_dimm_Twtr(ctrl, param, i, meminfo->dimm_mask)) <= 0) goto dimm_err;

		printk_raminit("\ttrfc\n");
		if ((rc = update_dimm_Trfc(ctrl, param, i, meminfo)) <= 0) goto dimm_err;

		/* DRAM Config Low */

		continue;
	dimm_err:
		printk(BIOS_DEBUG, "spd_set_dram_timing dimm_err!\n");
		if (rc < 0) {
			return -1;
		}
		meminfo->dimm_mask = disable_dimm(ctrl, i, meminfo);
	}

	get_extra_dimm_mask(ctrl, meminfo); // will be used by RDqsEn and dimm_x4
	/* DRAM Timing Low Register */

	/* DRAM Timing High Register */
	set_TrwtTO(ctrl, param);
	set_Twrrd (ctrl, param);
	set_Twrwr (ctrl, param);
	set_Trdrd (ctrl, param);

	set_4RankRDimm(ctrl, param, meminfo);

	/* DRAM Config High */
	set_Tfaw(ctrl, param, meminfo);
	set_DcqBypassMax(ctrl, param);
	set_max_async_latency(ctrl, param);
	set_RDqsEn(ctrl, param, meminfo);

	/* DRAM Config Low */
	set_ecc(ctrl, param, meminfo);
	set_dimm_x4(ctrl, param, meminfo);
	set_DramTerm(ctrl, param, meminfo);

	/* DRAM Control Misc */
	set_idle_cycle_limit(ctrl, param);
	set_RdWrQByp(ctrl, param);

	return meminfo->dimm_mask;
}

static void sdram_set_spd_registers(const struct mem_controller *ctrl,
				     struct sys_info *sysinfo)
{
	struct spd_set_memclk_result result;
	const struct mem_param *param;
	struct mem_param paramx;
	struct mem_info *meminfo;
#if 1
	if (!sysinfo->ctrl_present[ctrl->node_id]) {
		return;
	}
#endif
	meminfo = &sysinfo->meminfo[ctrl->node_id];

	printk(BIOS_DEBUG, "sdram_set_spd_registers: paramx :%p\n", &paramx);

	activate_spd_rom(ctrl);
	meminfo->dimm_mask = spd_detect_dimms(ctrl);

	printk_raminit("sdram_set_spd_registers: dimm_mask=0x%x\n", meminfo->dimm_mask);

	if (!(meminfo->dimm_mask & ((1 << 2*DIMM_SOCKETS) - 1)))
	{
		printk(BIOS_DEBUG, "No memory for this cpu\n");
		return;
	}
	meminfo->dimm_mask = spd_enable_2channels(ctrl, meminfo);
	printk_raminit("spd_enable_2channels: dimm_mask=0x%x\n", meminfo->dimm_mask);
	if (meminfo->dimm_mask == -1)
		goto hw_spd_err;

	meminfo->dimm_mask = spd_set_ram_size(ctrl, meminfo);
	printk_raminit("spd_set_ram_size: dimm_mask=0x%x\n", meminfo->dimm_mask);
	if (meminfo->dimm_mask == -1)
		goto hw_spd_err;

	meminfo->dimm_mask = spd_handle_unbuffered_dimms(ctrl, meminfo);
	printk_raminit("spd_handle_unbuffered_dimms: dimm_mask=0x%x\n", meminfo->dimm_mask);
	if (meminfo->dimm_mask == -1)
		goto hw_spd_err;

	result = spd_set_memclk(ctrl, meminfo);
	param     = result.param;
	meminfo->dimm_mask = result.dimm_mask;
	printk_raminit("spd_set_memclk: dimm_mask=0x%x\n", meminfo->dimm_mask);
	if (meminfo->dimm_mask == -1)
		goto hw_spd_err;

	//store memclk set to sysinfo, incase we need rebuilt param again
	meminfo->memclk_set = param->dch_memclk;

	memcpy(&paramx, param, sizeof(paramx));

	paramx.divisor = get_exact_divisor(param->dch_memclk, paramx.divisor);

	meminfo->dimm_mask = spd_set_dram_timing(ctrl, &paramx, meminfo);
	printk_raminit("spd_set_dram_timing: dimm_mask=0x%x\n", meminfo->dimm_mask);
	if (meminfo->dimm_mask == -1)
		goto hw_spd_err;

	order_dimms(ctrl, meminfo);

	return;
 hw_spd_err:
	/* Unrecoverable error reading SPD data */
	die("Unrecoverable error reading SPD data. No qualified DIMMs?");
	return;
}

#define TIMEOUT_LOOPS 300000

#include "raminit_f_dqs.c"

#if CONFIG_HW_MEM_HOLE_SIZEK != 0
static uint32_t hoist_memory(int controllers, const struct mem_controller *ctrl,unsigned hole_startk, int i)
{
	int ii;
	uint32_t carry_over;
	device_t dev;
	uint32_t base, limit;
	uint32_t basek;
	uint32_t hoist;
	int j;

	carry_over = (4*1024*1024) - hole_startk;

	for (ii=controllers - 1;ii>i;ii--) {
		base  = pci_read_config32(ctrl[0].f1, 0x40 + (ii << 3));
		if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
			continue;
		}
		limit = pci_read_config32(ctrl[0].f1, 0x44 + (ii << 3));
		limit += (carry_over << 2 );
		base  += (carry_over << 2 );
		for (j = 0; j < controllers; j++) {
			pci_write_config32(ctrl[j].f1, 0x44 + (ii << 3), limit);
			pci_write_config32(ctrl[j].f1, 0x40 + (ii << 3), base );
		}
	}
	limit = pci_read_config32(ctrl[0].f1, 0x44 + (i << 3));
	limit += (carry_over << 2);
	for (j = 0; j < controllers; j++) {
		pci_write_config32(ctrl[j].f1, 0x44 + (i << 3), limit);
	}
	dev = ctrl[i].f1;
	base  = pci_read_config32(dev, 0x40 + (i << 3));
	basek  = (base & 0xffff0000) >> 2;
	if (basek == hole_startk) {
		//don't need set memhole here, because hole off set will be 0, overflow
		//so need to change base reg instead, new basek will be 4*1024*1024
		base &= 0x0000ffff;
		base |= (4*1024*1024)<<2;
		for (j = 0; j < controllers; j++) {
			pci_write_config32(ctrl[j].f1, 0x40 + (i<<3), base);
		}
	}  else  {
		hoist = /* hole start address */
			((hole_startk << 10) & 0xff000000) +
			/* hole address to memory controller address */
			(((basek + carry_over) >> 6) & 0x0000ff00) +
			/* enable */
			1;
		pci_write_config32(dev, 0xf0, hoist);
	}

	return carry_over;
}

static void set_hw_mem_hole(int controllers, const struct mem_controller *ctrl)
{

	uint32_t hole_startk;
	int i;

	hole_startk = 4*1024*1024 - CONFIG_HW_MEM_HOLE_SIZEK;

	printk_raminit("Handling memory hole at 0x%08x (default)\n", hole_startk);
#if CONFIG_HW_MEM_HOLE_SIZE_AUTO_INC == 1
	/* We need to double check if the hole_startk is valid, if it is equal
	   to basek, we need to decrease it some */
	uint32_t basek_pri;
	for (i=0; i<controllers; i++) {
			uint32_t base;
			unsigned base_k;
			base  = pci_read_config32(ctrl[0].f1, 0x40 + (i << 3));
			if ((base & ((1<<1)|(1<<0))) != ((1<<1)|(1<<0))) {
				continue;
			}
			base_k = (base & 0xffff0000) >> 2;
			if (base_k == hole_startk) {
				/* decrease mem hole startk to make sure it is
				   on middle of previous node */
				hole_startk -= (base_k - basek_pri) >> 1;
				break; //only one hole
			}
			basek_pri = base_k;
	}
	printk_raminit("Handling memory hole at 0x%08x (adjusted)\n", hole_startk);
#endif
	/* find node index that need do set hole */
	for (i=0; i < controllers; i++) {
		uint32_t base, limit;
		unsigned base_k, limit_k;
		base  = pci_read_config32(ctrl[0].f1, 0x40 + (i << 3));
		if ((base & ((1 << 1) | (1 << 0))) != ((1 << 1) | (1 << 0))) {
			continue;
		}
		limit = pci_read_config32(ctrl[0].f1, 0x44 + (i << 3));
		base_k = (base & 0xffff0000) >> 2;
		limit_k = ((limit + 0x00010000) & 0xffff0000) >> 2;
		if ((base_k <= hole_startk) && (limit_k > hole_startk)) {
			unsigned end_k;
			hoist_memory(controllers, ctrl, hole_startk, i);
			end_k = memory_end_k(ctrl, controllers);
			set_top_mem(end_k, hole_startk);
			break; //only one hole
		}
	}

}
#endif
#if CONFIG_HAVE_ACPI_RESUME == 1
#include "exit_from_self.c"
#endif

static void sdram_enable(int controllers, const struct mem_controller *ctrl,
			  struct sys_info *sysinfo)
{
	int i;
#if CONFIG_HAVE_ACPI_RESUME == 1
	int suspend = acpi_is_wakeup_early();
#else
	int suspend = 0;
#endif

#if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1
	 unsigned cpu_f0_f1[8];
	/* FIXME: How about 32 node machine later? */
	tsc_t tsc, tsc0[8];

	printk(BIOS_DEBUG, "sdram_enable: tsc0[8]: %p", &tsc0[0]);
	uint32_t dword;
#endif

	/* Error if I don't have memory */
	if (memory_end_k(ctrl, controllers) == 0) {
		die("No memory\n");
	}

	/* Before enabling memory start the memory clocks */
	for (i = 0; i < controllers; i++) {
		uint32_t dch;
		if (!sysinfo->ctrl_present[ i ])
			continue;
		dch = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_HIGH);

		/* if no memory installed, disabled the interface */
		if (sysinfo->meminfo[i].dimm_mask==0x00){
			dch |= DCH_DisDramInterface;
			pci_write_config32(ctrl[i].f2, DRAM_CONFIG_HIGH, dch);

		} else {
			dch |= DCH_MemClkFreqVal;
			pci_write_config32(ctrl[i].f2, DRAM_CONFIG_HIGH, dch);
			/* address timing and Output driver comp Control */
			set_misc_timing(ctrl+i, sysinfo->meminfo+i );
		}
	}

	/* We need to wait a minimum of 20 MEMCLKS to enable the InitDram */
	memreset(controllers, ctrl);

	/* lets override the rest of the routine */
	if (suspend) {
		printk(BIOS_DEBUG, "Wakeup!\n");
		exit_from_self(controllers, ctrl, sysinfo);
		printk(BIOS_DEBUG, "Mem running !\n");
		return;
	}

	for (i = 0; i < controllers; i++) {
		uint32_t dcl, dch;
		if (!sysinfo->ctrl_present[ i ])
			continue;
		/* Skip everything if I don't have any memory on this controller */
		dch = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_HIGH);
		if (!(dch & DCH_MemClkFreqVal)) {
			continue;
		}

		/* ChipKill */
		dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW);
		if (dcl & DCL_DimmEccEn) {
			uint32_t mnc;
			printk(BIOS_SPEW, "ECC enabled\n");
			mnc = pci_read_config32(ctrl[i].f3, MCA_NB_CONFIG);
			mnc |= MNC_ECC_EN;
			if (dcl & DCL_Width128) {
				mnc |= MNC_CHIPKILL_EN;
			}
			pci_write_config32(ctrl[i].f3, MCA_NB_CONFIG, mnc);
		}

#if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1
		cpu_f0_f1[i] = is_cpu_pre_f2_in_bsp(i);
		if (cpu_f0_f1[i]) {
			//Rev F0/F1 workaround
#if 1
				/* Set the DqsRcvEnTrain bit */
			dword = pci_read_config32(ctrl[i].f2, DRAM_CTRL);
			dword |= DC_DqsRcvEnTrain;
			pci_write_config32(ctrl[i].f2, DRAM_CTRL, dword);
#endif
			tsc0[i] = rdtsc();
		}
#endif

		pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl);
		dcl |= DCL_InitDram;
		pci_write_config32(ctrl[i].f2, DRAM_CONFIG_LOW, dcl);
	}

	for (i = 0; i < controllers; i++) {
		uint32_t dcl, dcm;
		if (!sysinfo->ctrl_present[ i ])
			continue;
		/* Skip everything if I don't have any memory on this controller */
		if (sysinfo->meminfo[i].dimm_mask==0x00) continue;

		printk(BIOS_DEBUG, "Initializing memory: ");
		int loops = 0;
		do {
			dcl = pci_read_config32(ctrl[i].f2, DRAM_CONFIG_LOW);
			loops++;
			if ((loops & 1023) == 0) {
				printk(BIOS_DEBUG, ".");
			}
		} while(((dcl & DCL_InitDram) != 0) && (loops < TIMEOUT_LOOPS));
		if (loops >= TIMEOUT_LOOPS) {
			printk(BIOS_DEBUG, " failed\n");
			continue;
		}

		/* Wait until it is safe to touch memory */
		do {
			dcm = pci_read_config32(ctrl[i].f2, DRAM_CTRL_MISC);
		} while(((dcm & DCM_MemClrStatus) == 0) /* || ((dcm & DCM_DramEnabled) == 0)*/ );

#if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1
		if (cpu_f0_f1[i]) {
			tsc= rdtsc();

			print_debug_dqs_tsc("\nbegin tsc0", i, tsc0[i].hi, tsc0[i].lo, 2);
			print_debug_dqs_tsc("end   tsc ", i, tsc.hi, tsc.lo, 2);

			if (tsc.lo<tsc0[i].lo) {
				tsc.hi--;
			}
			tsc.lo -= tsc0[i].lo;
			tsc.hi -= tsc0[i].hi;

			tsc0[i].lo = tsc.lo;
			tsc0[i].hi = tsc.hi;

			print_debug_dqs_tsc("     dtsc0", i, tsc0[i].hi, tsc0[i].lo, 2);
		}
#endif
		printk(BIOS_DEBUG, " done\n");
	}

#if CONFIG_HW_MEM_HOLE_SIZEK != 0
	/* init hw mem hole here */
	/* DramHoleValid bit only can be set after MemClrStatus is set by Hardware */
	set_hw_mem_hole(controllers, ctrl);
#endif

	/* store tom to sysinfo, and it will be used by dqs_timing */
	{
		msr_t msr;
		//[1M, TOM)
		msr = rdmsr(TOP_MEM);
		sysinfo->tom_k = ((msr.hi<<24) | (msr.lo>>8))>>2;

		//[4G, TOM2)
		msr = rdmsr(TOP_MEM2);
		sysinfo->tom2_k = ((msr.hi<<24)| (msr.lo>>8))>>2;
	}

	for (i = 0; i < controllers; i++) {
		sysinfo->mem_trained[i] = 0;

		if (!sysinfo->ctrl_present[ i ])
			continue;

		/* Skip everything if I don't have any memory on this controller */
		if (sysinfo->meminfo[i].dimm_mask==0x00)
			continue;

		sysinfo->mem_trained[i] = 0x80; // mem need to be trained
	}


#if CONFIG_MEM_TRAIN_SEQ ==  0
   #if K8_REV_F_SUPPORT_F0_F1_WORKAROUND == 1
	dqs_timing(controllers, ctrl, tsc0, sysinfo);
   #else
	dqs_timing(controllers, ctrl, sysinfo);
   #endif
#else

#if CONFIG_MEM_TRAIN_SEQ == 2
	/* need to enable mtrr, so dqs training could access the test address  */
	setup_mtrr_dqs(sysinfo->tom_k, sysinfo->tom2_k);
#endif

	for (i = 0; i < controllers; i++) {
		/* Skip everything if I don't have any memory on this controller */
		if (sysinfo->mem_trained[i]!=0x80)
			continue;

		dqs_timing(i, &ctrl[i], sysinfo, 1);

#if CONFIG_MEM_TRAIN_SEQ == 1
		break; // only train the first node with ram
#endif
	}

#if CONFIG_MEM_TRAIN_SEQ == 2
	clear_mtrr_dqs(sysinfo->tom2_k);
#endif

#endif

#if CONFIG_MEM_TRAIN_SEQ != 1
	wait_all_core0_mem_trained(sysinfo);
#endif

}

void fill_mem_ctrl(int controllers, struct mem_controller *ctrl_a,
			  const uint16_t *spd_addr)
{
	int i;
	int j;
	struct mem_controller *ctrl;
	for (i=0;i<controllers; i++) {
		ctrl = &ctrl_a[i];
		ctrl->node_id = i;
		ctrl->f0 = PCI_DEV(0, 0x18+i, 0);
		ctrl->f1 = PCI_DEV(0, 0x18+i, 1);
		ctrl->f2 = PCI_DEV(0, 0x18+i, 2);
		ctrl->f3 = PCI_DEV(0, 0x18+i, 3);

		if (spd_addr == (void *)0) continue;

		for (j=0;j<DIMM_SOCKETS;j++) {
			ctrl->channel0[j] = spd_addr[(i*2+0)*DIMM_SOCKETS + j];
			ctrl->channel1[j] = spd_addr[(i*2+1)*DIMM_SOCKETS + j];
		}
	}
}