path: root/src/northbridge/amd/amdmct/mct/mctpro_d.c

/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2007 Advanced Micro Devices, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; version 2 of the License.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program; if not, write to the Free Software
 * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301 USA
 */


static u32 CheckNBCOFAutoPrechg(struct DCTStatStruc *pDCTstat, u32 dct);
static u8 mct_AdjustDQSPosDelay_D(struct DCTStatStruc *pDCTstat, u8 dly);

void EarlySampleSupport_D(void)
{
}


u32 procOdtWorkaround(struct DCTStatStruc *pDCTstat, u32 dct, u32 val)
{
	u32 tmp;
	tmp = pDCTstat->LogicalCPUID;
	if ((tmp == AMD_DR_A0A) || (tmp == AMD_DR_A1B) || (tmp == AMD_DR_A2)) {
		val &= 0x0FFFFFFF;
		if(pDCTstat->MAdimms[dct] > 1)
			val |= 0x10000000;
	}

	return val;
}


u32 OtherTiming_A_D(struct DCTStatStruc *pDCTstat, u32 val)
{
	/* Bug#10695:One MEMCLK Bubble Writes Don't Do X4 X8 Switching Correctly
	 * Solution: BIOS should set DRAM Timing High[Twrwr] > 00b
	 * ( F2x[1, 0]8C[1:0] > 00b).  Silicon Status: Fixed in Rev B
	 * FIXME: check if this is still required.
	 */
	u32 tmp;
	tmp = pDCTstat->LogicalCPUID;
	if ((tmp == AMD_DR_A0A) || (tmp == AMD_DR_A1B) || (tmp == AMD_DR_A2)) {
		if(!(val & (3<<12) ))
			val |= 1<<12;
	}
	return val;
}


void mct_ForceAutoPrecharge_D(struct DCTStatStruc *pDCTstat, u32 dct)
{
	u32 tmp;
	u32 reg;
	u32 reg_off;
	u32 dev;
	u32 val;

	tmp = pDCTstat->LogicalCPUID;
	if ((tmp == AMD_DR_A0A) || (tmp == AMD_DR_A1B) || (tmp == AMD_DR_A2)) {
		if(CheckNBCOFAutoPrechg(pDCTstat, dct)) {
			dev = pDCTstat->dev_dct;
			reg_off = 0x100 * dct;
			reg = 0x90 + reg_off;	/* Dram Configuration Lo */
			val = Get_NB32(dev, reg);
			val |= 1<<ForceAutoPchg;
			if(!pDCTstat->GangedMode)
				val |= 1<<BurstLength32;
			Set_NB32(dev, reg, val);

			reg = 0x88 + reg_off;	/* cx=Dram Timing Lo */
			val = Get_NB32(dev, reg);
			val |= 0x000F0000;	/* Trc = 0Fh */
			Set_NB32(dev, reg, val);
		}
	}
}


void mct_EndDQSTraining_D(struct MCTStatStruc *pMCTstat,
				struct DCTStatStruc *pDCTstatA)
{
	/* Bug#13341: Prefetch is getting killed when the limit is reached in
	 * PrefDramTrainMode
	 * Solution: Explicitly clear the PrefDramTrainMode bit after training
	 * sequence in order to ensure resumption of normal HW prefetch
	 * behavior.
	 * NOTE -- this has been documented with a note at the end of this
	 * section in the  BKDG (although, admittedly, the note does not really
	 * stand out).
	 * Silicon Status: Fixed in Rev B ( confirm)
	 * FIXME: check this.
	 */

	u32 tmp;
	u32 dev;
	u32 reg;
	u32 val;
	u32 Node;

	for(Node = 0; Node < MAX_NODES_SUPPORTED; Node++) {
		struct DCTStatStruc *pDCTstat;
		pDCTstat = pDCTstatA + Node;

		if(!pDCTstat->NodePresent) break;

		tmp = pDCTstat->LogicalCPUID;
		if ((tmp == AMD_DR_A0A) || (tmp == AMD_DR_A1B) || (tmp == AMD_DR_A2)) {
			dev = pDCTstat->dev_dct;
			reg = 0x11c;
			val = Get_NB32(dev, reg);
			val &= ~(1<<PrefDramTrainMode);
			Set_NB32(dev, reg, val);
		}
	}
}




void mct_BeforeDQSTrain_Samp_D(struct MCTStatStruc *pMCTstat,
				struct DCTStatStruc *pDCTstat)
{
	/* Bug#15115: Uncertainty In The Sync Chain Leads To Setup Violations
	 *  In TX FIFO
	 * Solution: BIOS should program DRAM Control Register[RdPtrInit] = 5h,
	 * (F2x[1, 0]78[3:0] = 5h).
	 *   Silicon Status: Fixed In Rev B0
	 */

	/* Bug#15880: Determine validity of reset settings for DDR PHY timing
	 *   regi..
	 * Solutiuon: At least, set WrDqs fine delay to be 0 for DDR2 training.
	 */

	u32 dev;
	u32 reg_off;
	u32 index_reg;
	u32 index;
	u32 reg;
	u32 val;
	u32 tmp;
	u32 Channel;


	tmp = pDCTstat->LogicalCPUID;
	if ((tmp == AMD_DR_A0A) || (tmp == AMD_DR_A1B) || (tmp == AMD_DR_A2)) {

		dev = pDCTstat->dev_dct;
		index = 0;

		for(Channel = 0; Channel<2; Channel++) {
			index_reg = 0x98 + 0x100 * Channel;
			val = Get_NB32_index_wait(dev, index_reg, 0x0d004007);
			val |= 0x3ff;
			Set_NB32_index_wait(dev, index_reg, 0x0d0f4f07, val);
		}

		for(Channel = 0; Channel<2; Channel++) {
			if(pDCTstat->GangedMode && Channel)
				break;
			reg_off = 0x100 * Channel;
			reg = 0x78 + reg_off;
			val = Get_NB32(dev, reg);
			val &= ~(0x07);
			val |= 5;
			Set_NB32(dev, reg, val);
		}

		for(Channel = 0; Channel<2; Channel++) {
			reg_off = 0x100 * Channel;
			val = 0;
			index_reg = 0x98 + reg_off;
			for( index = 0x30; index < (0x45 + 1); index++) {
				Set_NB32_index_wait(dev, index_reg, index, val);
			}
		}

	}
}


u32 Modify_D3CMP(struct DCTStatStruc *pDCTstat, u32 dct, u32 value)
{
	/* Errata#189: Reads To Phy Driver Calibration Register and Phy
	 *  Predriver Calibration Register Do Not Return Bit 27.
	 * Solution: See #41322 for details.
	 * BIOS can modify bit 27 of the Phy Driver Calibration register
	 * as follows:
	 *  1. Read F2x[1, 0]9C_x09
	 *  2. Read F2x[1, 0]9C_x0D004201
	 *  3. Set F2x[1, 0]9C_x09[27] = F2x[1, 0]9C_x0D004201[10]
	 * BIOS can modify bit 27 of the Phy Predriver Calibration register
	 * as follows:
	 *  1. Read F2x[1, 0]9C_x0A
	 *  2. Read F2x[1, 0]9C_x0D004209
	 *  3. Set F2x[1, 0]9C_x0A[27] = F2x[1, 0]9C_x0D004209[10]
	 * Silicon Status: Fixed planned for DR-B0
	 */

	u32 dev;
	u32 index_reg;
	u32 index;
	u32 val;
	u32 tmp;

	tmp = pDCTstat->LogicalCPUID;
	if ((tmp == AMD_DR_A0A) || (tmp == AMD_DR_A1B) || (tmp == AMD_DR_A2)) {
		dev = pDCTstat->dev_dct;
		index_reg = 0x98 + 0x100 * dct;
		index = 0x0D004201;
		val = Get_NB32_index_wait(dev, index_reg, index);
		value &= ~(1<<27);
		value |= ((val>>10) & 1) << 27;
	}
	return value;
}


void SyncSetting(struct DCTStatStruc *pDCTstat)
{
	/* Errata#198: AddrCmdSetup, CsOdtSetup, and CkeSetup Require Identical
	 * Programming For Both Channels in Ganged Mode
	 * Solution: The BIOS must program the following DRAM timing parameters
	 * the same for both channels:
	 *  1. F2x[1, 0]9C_x04[21] (AddrCmdSetup)
	 *  2. F2x[1, 0]9C_x04[15] (CsOdtSetup)
	 *  3. F2x[1, 0]9C_x04[5]) (CkeSetup)
	 * That is, if the AddrCmdSetup, CsOdtSetup, or CkeSetup is
	 * set to 1'b1 for one of the controllers, then the corresponding
	 * AddrCmdSetup, CsOdtSetup, or CkeSetup must be set to 1'b1 for the
	 * other controller.
	 * Silicon Status: Fix TBD
	 */

	u32 tmp;
	tmp = pDCTstat->LogicalCPUID;
	if ((tmp == AMD_DR_A0A) || (tmp == AMD_DR_A1B) || (tmp == AMD_DR_A2)) {
		pDCTstat->CH_ODC_CTL[1] = pDCTstat->CH_ODC_CTL[0];
		pDCTstat->CH_ADDR_TMG[1] = pDCTstat->CH_ADDR_TMG[0];
	}
}


static u32 CheckNBCOFAutoPrechg(struct DCTStatStruc *pDCTstat, u32 dct)
{
	u32 ret = 0;
	u32 lo, hi;
	u32 msr;
	u32 val;
	u32 valx, valy;
	u32 NbDid;

	/* 3 * (Fn2xD4[NBFid]+4)/(2^NbDid)/(3+Fn2x94[MemClkFreq]) */
	msr = 0xC0010071;
	_RDMSR(msr, &lo, &hi);
	NbDid = (lo>>22) & 1;

	val = Get_NB32(pDCTstat->dev_dct, 0x94 + 0x100 * dct);
	valx = ((val & 0x07) + 3)<<NbDid;
	print_tx("MemClk:", valx >> NbDid);

	val = Get_NB32(pDCTstat->dev_nbmisc, 0xd4);
	valy = ((val & 0x1f) + 4) * 3;
	print_tx("NB COF:", valy >> NbDid);

	val = valy/valx;
	if((val==3) && (valy%valx))  /* 3 < NClk/MemClk < 4 */
		ret = 1;

	return ret;
}


void mct_BeforeDramInit_D(struct DCTStatStruc *pDCTstat, u32 dct)
{
	u32 tmp;
	u32 Speed;
	u32 ch, ch_start, ch_end;
	u32 index_reg;
	u32 index;
	u32 dev;
	u32 val;


	tmp = pDCTstat->LogicalCPUID;
	if ((tmp == AMD_DR_A0A) || (tmp == AMD_DR_A1B) || (tmp == AMD_DR_A2)) {
		Speed = pDCTstat->Speed;
		/* MemClkFreq = 333MHz or 533Mhz */
		if((Speed == 3) || (Speed == 2)) {
			if(pDCTstat->GangedMode) {
				ch_start = 0;
				ch_end = 2;
			} else {
				ch_start = dct;
				ch_end = dct+1;
			}
			dev = pDCTstat->dev_dct;
			index = 0x0D00E001;
			for(ch=ch_start; ch<ch_end; ch++) {
				index_reg = 0x98 + 0x100 * ch;
				val = Get_NB32_index(dev, index_reg, 0x0D00E001);
				val &= ~(0xf0);
				val |= 0x80;
				Set_NB32_index(dev, index_reg, 0x0D01E001, val);
			}
		}

	}
}


static u8 mct_AdjustDelay_D(struct DCTStatStruc *pDCTstat, u8 dly)
{
	u8 skip = 0;
	dly &= 0x1f;
	if ((dly >= MIN_FENCE) && (dly <= MAX_FENCE))
		skip = 1;

	return skip;
}


static u8 mct_checkFenceHoleAdjust_D(struct MCTStatStruc *pMCTstat,
				struct DCTStatStruc *pDCTstat, u8 DQSDelay,
				u8 ChipSel,  u8 *result)
{
	u8 ByteLane;
	u32 tmp;

	tmp = pDCTstat->LogicalCPUID;
	if ((tmp == AMD_DR_A0A) || (tmp == AMD_DR_A1B) || (tmp == AMD_DR_A2)) {
		if (pDCTstat->Direction == DQS_WRITEDIR) {
			if ((pDCTstat->Speed == 2) || (pDCTstat->Speed == 3)) {
				if(DQSDelay == 13) {
					if (*result == 0xFF) {
						for (ByteLane = 0; ByteLane < 8; ByteLane++) {
							pDCTstat->DQSDelay = 13;
							pDCTstat->ByteLane = ByteLane;
							/* store the value into the data structure */
							StoreDQSDatStrucVal_D(pMCTstat, pDCTstat, ChipSel);
						}
						return 1;
					}
				}
			}
			if (mct_AdjustDQSPosDelay_D(pDCTstat, DQSDelay)) {
				*result = 0;
			}
		}
	}
	return 0;
}


static u8 mct_AdjustDQSPosDelay_D(struct DCTStatStruc *pDCTstat, u8 dly)
{
	u8 skip = 0;

	dly &= 0x1f;
	if ((dly >= MIN_DQS_WR_FENCE) && (dly <= MAX_DQS_WR_FENCE))
		skip = 1;

	return skip;

}

static void beforeInterleaveChannels_D(struct DCTStatStruc *pDCTstatA, u8 *enabled) {

	if (pDCTstatA->LogicalCPUID & (AMD_DR_Ax))
		*enabled = 0;
}


static u8 mctDoAxRdPtrInit_D(struct DCTStatStruc *pDCTstat, u8 *Rdtr)
{
	u32 tmp;

	tmp = pDCTstat->LogicalCPUID;
	if ((tmp == AMD_DR_A0A) || (tmp == AMD_DR_A1B) || (tmp == AMD_DR_A2)) {
		*Rdtr = 5;
		return 1;
	}
	return 0;
}


static void mct_AdjustScrub_D(struct DCTStatStruc *pDCTstat, u16 *scrub_request) {

	/* Erratum #202: disable DCache scrubber for Ax parts */

	if (pDCTstat->LogicalCPUID & (AMD_DR_Ax)) {
		*scrub_request = 0;
		pDCTstat->ErrStatus |= 1 << SB_DCBKScrubDis;
	}
}