1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
|
#include <cpu/amd/lxdef.h>
#if 0
static void sdram_set_registers(const struct mem_controller *ctrl)
{
}
#endif
/* Section 6.1.3, LX processor databooks, BIOS Initialization Sequence
* Section 4.1.4, GX/CS5535 GeodeROM Porting guide */
static void sdram_enable(int controllers, const struct mem_controller *ctrl)
{
int i;
msr_t msr;
/* DRAM initialization sequence according to the documentation:
* 1) Initialize the following GLMC registers/bits based on Serial Presence Detect (SPD) values:
* — MSR 20000018h except REF_INT bits [23:8]
* — MSR 20000019h
*/
// This is done by sdram_set_spd_registers()
/*WR_MSR MC_CF07_DATA, DIMMCONFIG, 0x05000040
;WR_MSR MC_CF07_DATA, DIMMCONFIG, 0x00000040 ; MSR 20000018h except REF_INT bits [23:8]. REF_STAG value from DOCS*/
/*
* 0x18000100 : 0x696332A3
*
* 63 - 32 | 31 15 0
* xxxxxxx | 0110 1001 0110 0011 0011 0010 1010 0011
*
* 30:28 CAS latency
*
* 010 - 2.0
* 110 - 2.5
*
*/
msr.hi = 0x18000100;
msr.lo = 0x696332A3;
wrmsr(MC_CF8F_DATA, msr);
/* 2) Initialize the following GLMC registers:
* — MSR 2000001Ah[15:8] = C8h
* — MSR 20002004h[2] = 0, [0] = 1
*/
msr.hi = 0x00000000;
msr.lo = 0x130AD101;
wrmsr(MC_CF1017_DATA, msr);
msr.hi = 0x00000000;
msr.lo = 0x00000001;
wrmsr(MC_GLD_MSR_PM, msr);
/* 3) Release MASK_CKE[1:0] (MSR 2000001Dh[9:8] = 11) */
msr.hi = 0x00000000;
msr.lo = 0x00001000;
wrmsr(MC_CFCLK_DBUG, msr);
//print_debug("sdram_enable step 3\r\n");
/* 4. set and clear REF_TST 16 times, more shouldn't hurt
* why this is before EMRS and MRS ? */
for (i = 0; i < 19; i++) {
msr = rdmsr(MC_CF07_DATA);
msr.lo |= (0x01 << 3);
wrmsr(MC_CF07_DATA, msr);
msr.lo &= ~(0x01 << 3);
wrmsr(MC_CF07_DATA, msr);
}
/* 5) Initialize REF_INT (MSR 20000018h[23:8]) to set refresh interval. */
msr.lo |= 0x2B00;
wrmsr(MC_CF07_DATA, msr);
/* set refresh staggering to 4 SDRAM clocks */
msr = rdmsr(0x20000018);
msr.lo &= ~(0x03 << 6);
msr.lo |= (0x00 << 6);
wrmsr(0x20000018, msr);
//print_debug("sdram_enable step 5\r\n");
/* 6) Perform load-mode with MSR_BA = 01 (MSR 200000018h[29:28] = 01)
* to initialize DIMM Extended Mode register.
* Load-mode is performed by setting/clearing PROG_DRAM (MSR 200000018h[0]).
*/
msr.lo |= ((0x01 << 28) | 0x01);
wrmsr(MC_CF07_DATA, msr);
msr.lo &= ~((0x01 << 28) | 0x01);
wrmsr(MC_CF07_DATA, msr);
/* 7. Reset DLL, Bit 27 is undocumented in GX datasheet,
* it is documented in LX datasheet */
/* load Mode Register by set and clear PROG_DRAM */
msr = rdmsr(MC_CF07_DATA);
msr.lo |= ((0x01 << 27) | 0x01);
wrmsr(MC_CF07_DATA, msr);
msr.lo &= ~((0x01 << 27) | 0x01);
wrmsr(MC_CF07_DATA, msr);
//print_debug("sdram_enable step 7\r\n");
/* 8. load Mode Register by set and clear PROG_DRAM */
msr = rdmsr(MC_CF07_DATA);
msr.lo |= 0x01;
wrmsr(MC_CF07_DATA, msr);
msr.lo &= ~0x01;
wrmsr(MC_CF07_DATA, msr);
//print_debug("sdram_enable step 8\r\n");
/* wait 200 SDCLKs */
for (i = 0; i < 200; i++)
outb(0xaa, 0x80);
/* load RDSYNC */
/*msr = rdmsr(0x2000001f);
msr.hi = 0x000ff310;
msr.lo = 0x00000000;
wrmsr(0x2000001f, msr);*/
/* set delay control */
msr = rdmsr(0x4c00000f);
msr.hi = 0x830d415a;
msr.lo = 0x8ea0ad6a;
wrmsr(0x4c00000f, msr);
print_debug("DRAM controller init done.\r\n");
/* DRAM working now?? */
}
|