summaryrefslogtreecommitdiff
path: root/src/northbridge/intel/i82810/raminit.c
blob: edde13b6f2188b9f99fb28745df24b922b303d68 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2007-2009 Uwe Hermann <uwe@hermann-uwe.de>
 * Copyright (C) 2007 Corey Osgood <corey.osgood@gmail.com>
 * Copyright (C) 2008-2009 Elia Yehuda <z4ziggy@gmail.com>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <spd.h>
#include <delay.h>
#include <stdint.h>
#include <arch/io.h>
#include <device/pci_def.h>
#include <console/console.h>
#include "i82810.h"
#include "raminit.h"

/*-----------------------------------------------------------------------------
Macros and definitions.
-----------------------------------------------------------------------------*/

/* Debugging macros. */
#if CONFIG_DEBUG_RAM_SETUP
#define PRINT_DEBUG(x...)	printk(BIOS_DEBUG, x)
#define DUMPNORTH()		dump_pci_device(PCI_DEV(0, 0, 0))
#else
#define PRINT_DEBUG(x...)
#define DUMPNORTH()
#endif

/* DRAMT[7:5] - SDRAM Mode Select (SMS). */
#define RAM_COMMAND_SELF_REFRESH 0x0 /* Disable refresh */
#define RAM_COMMAND_NORMAL	 0x1 /* Refresh: 15.6/11.7us for 100/133MHz */
#define RAM_COMMAND_NORMAL_FR	 0x2 /* Refresh: 7.8/5.85us for 100/133MHz */
#define RAM_COMMAND_NOP		 0x4 /* NOP command */
#define RAM_COMMAND_PRECHARGE	 0x5 /* All bank precharge */
#define RAM_COMMAND_MRS		 0x6 /* Mode register set */
#define RAM_COMMAND_CBR		 0x7 /* CBR */

/*
 * This table is used to translate the value read from SPD Byte 31 to a value
 * the northbridge can understand in DRP, aka Rx52[7:4], [3:0]. Where most
 * northbridges have some sort of simple calculation that can be done for this,
 * I haven't yet figured out one for this northbridge. Until someone does,
 * this table is necessary.
 */
static const u8 translate_spd_to_i82810[] = {
	/* Note: 4MB sizes are not supported, so dual-sided DIMMs with a 4MB
	 * side can't be either, at least for now.
	 */
	/* TODO: For above case, only use the other side if > 4MB, and get some
	 * of these DIMMs to test it with. Same for unsupported 128/x sizes.
	 */

		/*   SPD Byte 31	Memory Size [Side 1/2]	*/
	0xff,	/*	0x01		No memory	*/
	0xff,	/*	0x01		 4/0		*/
	0x01,	/*	0x02		 8/0		*/
	0xff,	/*	0x03		 8/4		*/
	0x04,	/*	0x04		16/0 or 16	*/
	0xff,	/*	0x05		16/4		*/
	0x05,	/*	0x06		16/8		*/
	0xff,	/*	0x07		Invalid		*/
	0x07,	/*	0x08		32/0 or 32	*/
	0xff,	/*	0x09		32/4		*/
	0xff,	/*	0x0A		32/8		*/
	0xff,	/*	0x0B		Invalid		*/
	0x08,	/*	0x0C		32/16		*/
	0xff, 0xff, 0xff, /* 0x0D-0F	Invalid		*/
	0x0a,	/*	0x10		64/0 or 64	*/
	0xff,	/*	0x11		64/4		*/
	0xff,	/*	0x12		64/8		*/
	0xff,	/*	0x13		Invalid		*/
	0xff,	/*	0x14		64/16		*/
	0xff, 0xff, 0xff, /* 0x15-17	Invalid		*/
	0x0b,	/*	0x18		64/32		*/
	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 0x19-1f Invalid */
	0x0d,	/*	0x20		128/0 or 128	*/
	/* These configurations are not supported by the i810 */
	0xff,	/*	0x21		128/4		*/
	0xff,	/*	0x22		128/8		*/
	0xff,	/*	0x23		Invalid		*/
	0xff,	/*	0x24		128/16		*/
	0xff, 0xff, 0xff, /* 0x25-27	Invalid		*/
	0xff,	/*	0x28		128/32		*/
	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, /* 0x29-2f Invalid */
	0x0e,	/*	0x30		128/64		*/
	0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff,
	0xff, 0xff, 0xff, /* 0x31-3f	Invalid		*/
	0x0f,	/*	0x40		256/0 or 256	*/
	/* Anything larger is not supported by the 82810. */
};

/*
 * Table which returns the RAM size in MB when fed the DRP[7:4] or [3:0] value.
 * Note that 2 is a value which the DRP should never be programmed to.
 * Some size values appear twice, due to single-sided vs dual-sided banks.
 */
static const u16 translate_i82810_to_mb[] = {
/* DRP	0  1 (2) 3   4   5   6   7   8   9   A   B   C    D    E    F */
/* MB */0, 8, 0, 16, 16, 24, 32, 32, 48, 64, 64, 96, 128, 128, 192, 256,
};

/* Size of bank#0 for dual-sided DIMMs */
static const u8 translate_i82810_to_bank[] = {
/* DRP	0  1 (2) 3  4  5   6   7  8   9   A  B   C   D  E    F */
/* MB */0, 0, 0, 8, 0, 16, 16, 0, 32, 32, 0, 64, 64, 0, 128, 128,
};

struct dimm_info {
	u8 ds;		/* dual-sided */
	u8 ss;		/* single-sided */
	u8 size;
};

/*-----------------------------------------------------------------------------
SDRAM configuration functions.
-----------------------------------------------------------------------------*/

/**
 * Send the specified RAM command to all DIMMs.
 *
 * @param command The RAM command to send to the DIMM(s).
 */
static void do_ram_command(u8 command)
{
	u32 *addr, addr_offset;
	u16 dimm_size, dimm_start, dimm_bank;
	u8 reg8, drp;
	int i, caslatency;

	/* Configure the RAM command. */
	reg8 = pci_read_config8(PCI_DEV(0, 0, 0), DRAMT);
	reg8 &= 0x1f;		/* Clear bits 7-5. */
	reg8 |= command << 5;
	pci_write_config8(PCI_DEV(0, 0, 0), DRAMT, reg8);

	/*
	 * RAM_COMMAND_NORMAL affects only the memory controller and
	 * doesn't need to be "sent" to the DIMMs.
	 */
	if (command == RAM_COMMAND_NORMAL)
		return;

	dimm_start = 0;
	for (i = 0; i < DIMM_SOCKETS; i++) {
		/*
		 * Calculate the address offset where we need to "send" the
		 * DIMM command to. For most commands the offset is 0, only
		 * RAM_COMMAND_MRS needs special values, see below.
		 * The final address offset bits depend on three things:
		 *
		 *  (1) Some hardcoded values specified in the datasheet.
		 *  (2) Which CAS latency we will use/set. This is the SMAA[4]
		 *      bit, which is 1 for CL3, and 0 for CL2. The bitstring
		 *      so far has the form '00000001X1010', X being SMAA[4].
		 *  (3) The DIMM to which we want to send the command. For
		 *      DIMM0 no special handling is needed, but for DIMM1 we
		 *      must invert the four bits SMAA[7:4] (see datasheet).
		 *
		 * Finally, the bitstring has to be shifted 3 bits to the left.
		 * See i810 datasheet pages 43, 85, and 86 for details.
		 */
		addr_offset = 0;
		caslatency = 3; /* TODO: Dynamically get CAS latency later. */
		if (i == 0 && command == RAM_COMMAND_MRS && caslatency == 3)
			addr_offset = 0x1d0; /* DIMM0, CL3, 0000111010000 */
		if (i == 1 && command == RAM_COMMAND_MRS && caslatency == 3)
			addr_offset = 0x650; /* DIMM1, CL3, 0011001010000 */
		if (i == 0 && command == RAM_COMMAND_MRS && caslatency == 2)
			addr_offset = 0x150; /* DIMM0, CL2, 0000101010000 */
		if (i == 1 && command == RAM_COMMAND_MRS && caslatency == 2)
			addr_offset = 0x1a0; /* DIMM1, CL2, 0000110100000 */

		drp = pci_read_config8(PCI_DEV(0, 0, 0), DRP);
		drp = (drp >> (i * 4)) & 0x0f;

		dimm_size = translate_i82810_to_mb[drp];
		if (dimm_size) {
		  addr = (u32 *)((dimm_start * 1024 * 1024) + addr_offset);
			PRINT_DEBUG("    Sending RAM command 0x%02x to 0x%p\n", reg8, addr);
			read32(addr);
		}

		dimm_bank = translate_i82810_to_bank[drp];
		if (dimm_bank) {
		  addr = (u32 *)(((dimm_start + dimm_bank) * 1024 * 1024) + addr_offset);
			PRINT_DEBUG("    Sending RAM command 0x%02x to 0x%p\n", reg8, addr);
			read32(addr);
		}

		dimm_start += dimm_size;
	}
}

/*-----------------------------------------------------------------------------
DIMM-independent configuration functions.
-----------------------------------------------------------------------------*/

/*
 * Set DRP - DRAM Row Population Register (Device 0).
 */
static void spd_set_dram_size(void)
{
	/* The variables drp and dimm_size have to be ints since all the
	 * SMBus-related functions return ints, and its just easier this way.
	 */
	int i, drp, dimm_size;

	drp = 0x00;

	for (i = 0; i < DIMM_SOCKETS; i++) {
		/* First check if a DIMM is actually present. */
		if (smbus_read_byte(DIMM0 + i, 2) == 4) {
			printk(BIOS_DEBUG, "Found DIMM in slot %d\n", i);

			dimm_size = smbus_read_byte(DIMM0 + i, 31);

			printk(BIOS_DEBUG, "DIMM is %dMB\n", dimm_size * 4);

			/* The i810 can't handle DIMMs larger than 128MB per
			 * side. This will fail if the DIMM uses a
			 * non-supported DRAM tech, and can't be used until
			 * buffers are done dynamically.
			 * Note: the factory BIOS just dies if it spots this :D
			 */
			if (dimm_size > 32) {
				printk(BIOS_ERR, "DIMM row sizes larger than 128MB not"
					  "supported on i810\n");
				printk
				    (BIOS_ERR, "Attempting to treat as 128MB DIMM\n");
				dimm_size = 32;
			} else if (dimm_size < 0) {
				/* On smbus error, set DIMM size to 0 */
				printk(BIOS_ERR, "Error reading DIMM size\n");
				dimm_size = 0;
			}

			if (dimm_size > 0) {
				/* This array is provided in raminit.h, because it got
				 * extremely messy. The above way is cleaner, but
				 * doesn't support any asymmetrical/odd configurations.
				 */
				dimm_size = translate_spd_to_i82810[dimm_size];

				printk(BIOS_DEBUG, "After translation, dimm_size is %d\n",
					dimm_size);

				/* If the DIMM is dual-sided, the DRP value is +2 */
				/* TODO: Figure out asymmetrical configurations. */
				if ((smbus_read_byte(DIMM0 + i, 127) | 0xf) == 0xff) {
					printk(BIOS_DEBUG, "DIMM is dual-sided\n");
					dimm_size += 2;
				}
			}
		} else {
			printk(BIOS_DEBUG, "No DIMM found in slot %d\n", i);

			/* If there's no DIMM in the slot, set value to 0. */
			dimm_size = 0x00;
		}

		/* Put in dimm_size to reflect the current DIMM. */
		drp |= dimm_size << (i * 4);
	}

	printk(BIOS_DEBUG, "DRP calculated to 0x%02x\n", drp);

	pci_write_config8(PCI_DEV(0, 0, 0), DRP, drp);
}

static void set_dram_timing(void)
{
	/* TODO, for now using default, hopefully safe values. */
	// pci_write_config8(PCI_DEV(0, 0, 0), DRAMT, 0x00);
}

/*
 * TODO: BUFF_SC needs to be set according to the DRAM tech (x8, x16,
 * or x32), but the datasheet doesn't list all the details. Currently, it
 * needs to be pulled from the output of 'lspci -xxx Rx92'.
 *
 * Common results (tested on actual hardware) are:
 *
 * (DRP: c = 128MB dual sided, d = 128MB single sided, f = 256MB dual sided)
 *
 * BUFF_SC  TOM     DRP    DIMM0                DIMM1
 * ----------------------------------------------------------------------------
 * 0x3356   128MB   0x0c   128MB dual-sided     -
 * 0xcc56   128MB   0xc0   -                    128MB dual-sided
 * 0x77da   128MB   0x0d   128MB single-sided   -
 * 0xddda   128MB   0xd0   -                    128MB single-sided
 * 0x0001   256MB   0xcc   128MB dual-sided     128MB dual-sided
 * 0x55c6   256MB   0xdd   128MB single-sided   128MB single-sided
 * 0x4445   256MB   0xcd   128MB single-sided   128MB dual-sided
 * 0x1145   256MB   0xdc   128MB dual-sided     128MB single-sided
 * 0x3356   256MB   0x0f   256MB dual-sided     -
 * 0xcc56   256MB   0xf0   -                    256MB dual-sided
 * 0x0001   384MB   0xcf   256MB dual-sided     128MB dual-sided
 * 0x0001   384MB   0xfc   128MB dual-sided     256MB dual-sided
 * 0x1145   384MB   0xdf   256MB dual-sided     128MB single-sided
 * 0x4445   384MB   0xfd   128MB single-sided   256MB dual-sided
 * 0x0001   512MB   0xff   256MB dual-sided     256MB dual-sided
 *
 * See also:
 * http://www.coreboot.org/pipermail/coreboot/2009-May/047966.html
 */
static void set_dram_buffer_strength(void)
{
	struct dimm_info d0, d1;
	u16 buff_sc;

	/* Check first slot. */
	d0.size = d0.ds = d0.ss = 0;
	if (smbus_read_byte(DIMM0, SPD_MEMORY_TYPE) == SPD_MEMORY_TYPE_SDRAM) {
		d0.size = smbus_read_byte(DIMM0, SPD_BANK_DENSITY);
		d0.ds = smbus_read_byte(DIMM0, SPD_NUM_DIMM_BANKS) > 1;
		d0.ss = !d0.ds;
	}

	/* Check second slot. */
	d1.size = d1.ds = d1.ss = 0;
	if (smbus_read_byte(DIMM0 + 1, SPD_MEMORY_TYPE)
	    == SPD_MEMORY_TYPE_SDRAM) {
		d1.size = smbus_read_byte(DIMM0 + 1, SPD_BANK_DENSITY);
		d1.ds = smbus_read_byte(DIMM0 + 1, SPD_NUM_DIMM_BANKS) > 1;
		d1.ss = !d1.ds;
	}

	buff_sc = 0;

	/* Tame the beast... */
	if ((d0.ds && d1.ds) || (d0.ds && d1.ss) || (d0.ss && d1.ds))
		buff_sc |= 1;
	if ((d0.size && !d1.size) || (!d0.size && d1.size) || (d0.ss && d1.ss))
		buff_sc |= 1 << 1;
	if ((d0.ds && !d1.size) || (!d0.size && d1.ds) || (d0.ss && d1.ss)
	   || (d0.ds && d1.ss) || (d0.ss && d1.ds))
		buff_sc |= 1 << 2;
	if ((d0.ss && !d1.size) || (!d0.size && d1.ss))
		buff_sc |= 1 << 3;
	if ((d0.size && !d1.size) || (!d0.size && d1.size))
		buff_sc |= 1 << 4;
	if ((d0.ds && !d1.size) || (!d0.size && d1.ds) || (d0.ds && d1.ss)
	   || (d0.ss && d1.ds))
		buff_sc |= 1 << 6;
	if ((d0.ss && !d1.size) || (!d0.size && d1.ss) || (d0.ss && d1.ss))
		buff_sc |= 3 << 6;
	if ((!d0.size && d1.ss) || (d0.ds && d1.ss) || (d0.ss && d1.ss))
		buff_sc |= 1 << 8;
	if (d0.size && !d1.size)
		buff_sc |= 3 << 8;
	if ((d0.ss && !d1.size) || (d0.ss && d1.ss) || (d0.ss && d1.ds))
		buff_sc |= 1 << 10;
	if (!d0.size && d1.size)
		buff_sc |= 3 << 10;
	if ((d0.size && !d1.size) || (d0.ss && !d1.size) || (!d0.size && d1.ss)
	   || (d0.ss && d1.ss) || (d0.ds && d1.ss))
		buff_sc |= 1 << 12;
	if (d0.size && !d1.size)
		buff_sc |= 1 << 13;
	if ((!d0.size && d1.size) || (d0.ss && !d1.size) || (d0.ss && d1.ss)
	   || (d0.ss && d1.ds))
		buff_sc |= 1 << 14;
	if (!d0.size && d1.size)
		buff_sc |= 1 << 15;

	printk(BIOS_DEBUG, "BUFF_SC calculated to 0x%04x\n", buff_sc);

	pci_write_config16(PCI_DEV(0, 0, 0), BUFF_SC, buff_sc);
}

/*-----------------------------------------------------------------------------
Public interface.
-----------------------------------------------------------------------------*/

void sdram_set_registers(void)
{
	u8 reg8;
	u16 did;

	did = pci_read_config16(PCI_DEV(0, 0, 0), PCI_DEVICE_ID);

	/* Ideally, this should be R/W for as many ranges as possible. */
	pci_write_config8(PCI_DEV(0, 0, 0), PAMR, 0xff);

	/* Set size for onboard-VGA framebuffer. */
	reg8 = pci_read_config8(PCI_DEV(0, 0, 0), SMRAM);
	reg8 &= 0x3f;			     /* Disable graphics (for now). */
#if CONFIG_VIDEO_MB
	if (CONFIG_VIDEO_MB == 512)
		reg8 |= (1 << 7);	     /* Enable graphics (512KB RAM). */
	else if (CONFIG_VIDEO_MB == 1)
		reg8 |= (1 << 7) | (1 << 6); /* Enable graphics (1MB RAM). */
#endif
	pci_write_config8(PCI_DEV(0, 0, 0), SMRAM, reg8);

	/* MISSC2: Bits 1, 2, 6, 7 must be set for VGA (see datasheet). */
	reg8 = pci_read_config8(PCI_DEV(0, 0, 0), MISSC2);
	reg8 |= (1 << 1); /* Instruction Parser Unit-Level Clock Gating */
	reg8 |= (1 << 2); /* Palette Load Select */
	if (did == 0x7124) {
		/* Bits 6 and 7 are only available on 82810E (not 82810). */
		reg8 |= (1 << 6); /* Text Immediate Blit */
		reg8 |= (1 << 7); /* Must be 1 as per datasheet. */
	}
	pci_write_config8(PCI_DEV(0, 0, 0), MISSC2, reg8);
}

void sdram_set_spd_registers(void)
{
	spd_set_dram_size();
	set_dram_buffer_strength();
	set_dram_timing();
}

/**
 * Enable SDRAM.
 */
void sdram_enable(void)
{
	int i;

	/* 1. Apply NOP. */
	PRINT_DEBUG("RAM Enable 1: Apply NOP\n");
	do_ram_command(RAM_COMMAND_NOP);
	udelay(200);

	/* 2. Precharge all. Wait tRP. */
	PRINT_DEBUG("RAM Enable 2: Precharge all\n");
	do_ram_command(RAM_COMMAND_PRECHARGE);
	udelay(1);

	/* 3. Perform 8 refresh cycles. Wait tRC each time. */
	PRINT_DEBUG("RAM Enable 3: CBR\n");
	for (i = 0; i < 8; i++) {
		do_ram_command(RAM_COMMAND_CBR);
		udelay(1);
	}

	/* 4. Mode register set. Wait two memory cycles. */
	PRINT_DEBUG("RAM Enable 4: Mode register set\n");
	do_ram_command(RAM_COMMAND_MRS);
	udelay(2);

	/* 5. Normal operation (enables refresh at 15.6usec). */
	PRINT_DEBUG("RAM Enable 5: Normal operation\n");
	do_ram_command(RAM_COMMAND_NORMAL);
	udelay(1);

	PRINT_DEBUG("Northbridge following SDRAM init:\n");
	DUMPNORTH();
}