summaryrefslogtreecommitdiff
path: root/src/northbridge/intel/i82830/raminit.c
blob: 7850c8749ac423f9ee8e7e4f817a6639b057687b (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2008-2010 Joseph Smith <joe@settoplinux.org>
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#include <spd.h>
#include <delay.h>
#include "lib/debug.c"
#include "i82830.h"

/*-----------------------------------------------------------------------------
Macros and definitions.
-----------------------------------------------------------------------------*/

/* Debugging macros. */
#if CONFIG_DEBUG_RAM_SETUP
#define PRINTK_DEBUG(x...)	printk(BIOS_DEBUG, x)
#define DUMPNORTH()		dump_pci_device(PCI_DEV(0, 0, 0))
#else
#define PRINTK_DEBUG(x...)
#define DUMPNORTH()
#endif

/* DRC[10:8] - Refresh Mode Select (RMS).
 * 0x0 for Refresh Disabled (Self Refresh)
 * 0x1 for Refresh interval 15.6 us for 133MHz
 * 0x2 for Refresh interval 7.8 us for 133MHz
 * 0x7 for Refresh interval 128 Clocks. (Fast Refresh Mode)
 */
#define RAM_COMMAND_REFRESH		0x1

/* DRC[6:4] - SDRAM Mode Select (SMS). */
#define RAM_COMMAND_SELF_REFRESH	0x0
#define RAM_COMMAND_NOP			0x1
#define RAM_COMMAND_PRECHARGE		0x2
#define RAM_COMMAND_MRS			0x3
#define RAM_COMMAND_CBR			0x6
#define RAM_COMMAND_NORMAL		0x7

/* DRC[29] - Initialization Complete (IC). */
#define RAM_COMMAND_IC			0x1

/*-----------------------------------------------------------------------------
DIMM-initialization functions.
-----------------------------------------------------------------------------*/

static void do_ram_command(u32 command)
{
	u32 reg32;

	/* Configure the RAM command. */
	reg32 = pci_read_config32(NORTHBRIDGE, DRC);
	/* Clear bits 29, 10-8, 6-4. */
	reg32 &= 0xdffff88f;
	reg32 |= command << 4;
	PRINTK_DEBUG("  Sending RAM command 0x%08x", reg32);
	pci_write_config32(NORTHBRIDGE, DRC, reg32);
}

static void ram_read32(u8 dimm_start, u32 offset)
{
	u32 reg32, base_addr = 32 * 1024 * 1024 * dimm_start;
	if (offset == 0x55aa55aa) {
		reg32 = read32((u32 *)base_addr);
		PRINTK_DEBUG("  Reading RAM at 0x%08x => 0x%08x\n", base_addr, reg32);
		PRINTK_DEBUG("  Writing RAM at 0x%08x <= 0x%08x\n", base_addr, offset);
		write32((u32 *)base_addr, offset);
		reg32 = read32((u32 *)base_addr);
		PRINTK_DEBUG("  Reading RAM at 0x%08x => 0x%08x\n", base_addr, reg32);
	} else {
		PRINTK_DEBUG(" to 0x%08x\n", base_addr + offset);
		read32((u32 *)(base_addr + offset));
	}
}

static void initialize_dimm_rows(void)
{
	int i, row;
	u8 dimm_start, dimm_end;
	unsigned device;

	dimm_start = 0;

	for (row = 0; row < (DIMM_SOCKETS * 2); row++) {

		switch (row) {
			case 0:
				device = DIMM0;
				break;
			case 1:
				device = DIMM0;
				break;
			case 2:
				device = DIMM0 + 1;
				break;
			case 3:
				device = DIMM0 + 1;
				break;
		}

		dimm_end = pci_read_config8(NORTHBRIDGE, DRB + row);

		if (dimm_end > dimm_start) {
			printk(BIOS_DEBUG, "Initializing SDRAM Row %u\n", row);

			/* NOP command */
			PRINTK_DEBUG(" NOP\n");
			do_ram_command(RAM_COMMAND_NOP);
			ram_read32(dimm_start, 0);
			udelay(200);

			/* Pre-charge all banks (at least 200 us after NOP) */
			PRINTK_DEBUG(" Pre-charging all banks\n");
			do_ram_command(RAM_COMMAND_PRECHARGE);
			ram_read32(dimm_start, 0);
			udelay(1);

			/* 8 CBR refreshes (Auto Refresh) */
			PRINTK_DEBUG(" 8 CBR refreshes\n");
			for (i = 0; i < 8; i++) {
				do_ram_command(RAM_COMMAND_CBR);
				ram_read32(dimm_start, 0);
				udelay(1);
			}

			/* MRS command */
			/* TODO: Set offset 0x1d0 according to DRT values */
			PRINTK_DEBUG(" MRS\n");
			do_ram_command(RAM_COMMAND_MRS);
			ram_read32(dimm_start, 0x1d0);
			udelay(2);

			/* Set GMCH-M Mode Select bits back to NORMAL operation mode */
			PRINTK_DEBUG(" Normal operation mode\n");
			do_ram_command(RAM_COMMAND_NORMAL);
			ram_read32(dimm_start, 0);
			udelay(1);

			/* Perform a dummy memory read/write cycle */
			PRINTK_DEBUG(" Performing dummy read/write\n");
			ram_read32(dimm_start, 0x55aa55aa);
			udelay(1);
		}
		/* Set the start of the next DIMM. */
		dimm_start = dimm_end;
	}
}

/*-----------------------------------------------------------------------------
DIMM-independent configuration functions.
-----------------------------------------------------------------------------*/

struct dimm_size {
	unsigned int side1;
	unsigned int side2;
};

static struct dimm_size spd_get_dimm_size(unsigned device)
{
	struct dimm_size sz;
	int i, module_density, dimm_banks;
	sz.side1 = 0;
	module_density = spd_read_byte(device, SPD_DENSITY_OF_EACH_ROW_ON_MODULE);
	dimm_banks = spd_read_byte(device, SPD_NUM_DIMM_BANKS);

	/* Find the size of side1. */
	/* Find the larger value. The larger value is always side1. */
	for (i = 512; i >= 0; i >>= 1) {
		if ((module_density & i) == i) {
			sz.side1 = i;
			break;
		}
	}

	/* Set to 0 in case it's single sided. */
	sz.side2 = 0;

	/* Test if it's a dual-sided DIMM. */
	if (dimm_banks > 1) {
		/* Test to see if there's a second value, if so it's asymmetrical. */
		if (module_density != i) {
			/* Find the second value, picking up where we left off. */
			/* i >>= 1 done initially to make sure we don't get the same value again. */
			for (i >>= 1; i >= 0; i >>= 1) {
				if (module_density == (sz.side1 | i)) {
					sz.side2 = i;
					break;
				}
			}
			/* If not, it's symmetrical */
		} else {
			sz.side2 = sz.side1;
		}
	}

	/* SPD byte 31 is the memory size divided by 4 so we
	 * need to multiply by 4 to get the total size.
	 */
	sz.side1 *= 4;
	sz.side2 *= 4;
	return sz;
}

static void set_dram_row_boundaries(void)
{
	int i, value, drb1, drb2;

	for (i = 0; i < DIMM_SOCKETS; i++) {
		struct dimm_size sz;
		unsigned device;
		device = DIMM0 + i;
		drb1 = 0;
		drb2 = 0;

		/* First check if a DIMM is actually present. */
		if (spd_read_byte(device, SPD_MEMORY_TYPE) == 0x4) {
			printk(BIOS_DEBUG, "Found DIMM in slot %u\n", i);
			sz = spd_get_dimm_size(device);
			printk(BIOS_DEBUG, " DIMM is %uMB on side 1\n", sz.side1);
			printk(BIOS_DEBUG, " DIMM is %uMB on side 2\n", sz.side2);

			/* - Memory compatibility checks - */

			/* Test for PC133 (i82830 only supports PC133) */
			/* PC133 SPD9 - cycle time is always 75 */
			if (spd_read_byte(device, SPD_MIN_CYCLE_TIME_AT_CAS_MAX) != 0x75) {
				printk(BIOS_ERR, "SPD9 DIMM Is Not PC133 Compatable\n");
				die("HALT\n");
			}
			/* PC133 SPD10 - access time is always 54 */
			if (spd_read_byte(device, SPD_ACCESS_TIME_FROM_CLOCK) != 0x54) {
				printk(BIOS_ERR, "SPD10 DIMM Is Not PC133 Compatable\n");
				die("HALT\n");
			}

			/* The i82830 only supports a symmetrical dual-sided dimms
			 * and can't handle DIMMs smaller than 32MB per
			 * side or larger than 256MB per side.
			 */
			if ((sz.side2 != 0) && (sz.side1 != sz.side2)) {
				printk(BIOS_ERR, "This northbridge only supports\n");
				printk(BIOS_ERR, "symmetrical dual-sided DIMMs\n");
				printk(BIOS_ERR, "booting as a single-sided DIMM\n");
				sz.side2 = 0;
			}
			if ((sz.side1 < 32)) {
				printk(BIOS_ERR, "DIMMs smaller than 32MB per side\n");
				printk(BIOS_ERR, "are not supported on this northbridge\n");
				die("HALT\n");
			}

			if ((sz.side1 > 256)) {
				printk(BIOS_ERR, "DIMMs larger than 256MB per side\n");
				printk(BIOS_ERR, "are not supported on this northbridge\n");
				die("HALT\n");
			}
			/* - End Memory compatibility checks - */

			/* We need to divide size by 32 to set up the
			 * DRB registers.
			 */
			if (sz.side1)
				drb1 = sz.side1 / 32;
			if (sz.side2)
				drb2 = sz.side2 / 32;
		} else {
			printk(BIOS_DEBUG, "No DIMM found in slot %u\n", i);

			/* If there's no DIMM in the slot, set value to 0. */
			drb1 = 0;
			drb2 = 0;
		}
		/* Set the value for DRAM Row Boundary Registers */
		if (i == 0) {
			pci_write_config8(NORTHBRIDGE, DRB, drb1);
			pci_write_config8(NORTHBRIDGE, DRB + 1, drb1 + drb2);
			PRINTK_DEBUG(" DRB 0x%02x has been set to 0x%02x\n", DRB, drb1);
			PRINTK_DEBUG(" DRB1 0x%02x has been set to 0x%02x\n", DRB + 1, drb1 + drb2);
		} else if (i == 1) {
			value = pci_read_config8(NORTHBRIDGE, DRB + 1);
			pci_write_config8(NORTHBRIDGE, DRB + 2, value + drb1);
			pci_write_config8(NORTHBRIDGE, DRB + 3, value + drb1 + drb2);
			PRINTK_DEBUG(" DRB2 0x%02x has been set to 0x%02x\n", DRB + 2, value + drb1);
			PRINTK_DEBUG(" DRB3 0x%02x has been set to 0x%02x\n", DRB + 3, value + drb1 + drb2);

			/* We need to set the highest DRB value to 0x64 and 0x65.
			 * These are supposed to be "Reserved" but memory will
			 * not initialize properly if we don't.
			 */
			value = pci_read_config8(NORTHBRIDGE, DRB + 3);
			pci_write_config8(NORTHBRIDGE, DRB + 4, value);
			pci_write_config8(NORTHBRIDGE, DRB + 5, value);
		}
	}
}

static void set_dram_row_attributes(void)
{
	int i, dra, col, width, value;

	for (i = 0; i < DIMM_SOCKETS; i++) {
		unsigned device;
		device = DIMM0 + i;

		/* First check if a DIMM is actually present. */
		if (spd_read_byte(device, SPD_MEMORY_TYPE) == 0x4) {
			PRINTK_DEBUG("Found DIMM in slot %u\n", i);

			dra = 0x00;

			/* columns */
			col = spd_read_byte(device, SPD_NUM_COLUMNS);

			/* data width */
			width = spd_read_byte(device, SPD_MODULE_DATA_WIDTH_LSB);

			/* calculate page size in bits */
			value = ((1 << col) * width);

			/* convert to Kilobytes */
			dra = ((value / 8) >> 10);

			/* # of banks of DIMM (single or double sided) */
			value = spd_read_byte(device, SPD_NUM_DIMM_BANKS);

			if (value == 1) {
				if (dra == 2) {
					dra = 0xF0; /* 2KB */
				} else if (dra == 4) {
					dra = 0xF1; /* 4KB */
				} else if (dra == 8) {
					dra = 0xF2; /* 8KB */
				} else if (dra == 16) {
					dra = 0xF3; /* 16KB */
				} else {
					printk(BIOS_ERR, "Page size not supported\n");
					die("HALT\n");
				}
			} else if (value == 2) {
				if (dra == 2) {
					dra = 0x00; /* 2KB */
				} else if (dra == 4) {
					dra = 0x11; /* 4KB */
				} else if (dra == 8) {
					dra = 0x22; /* 8KB */
				} else if (dra == 16) {
					dra = 0x33; /* 16KB */
				} else {
					printk(BIOS_ERR, "Page size not supported\n");
					die("HALT\n");
				}
			} else {
				printk(BIOS_ERR, "# of banks of DIMM not supported\n");
				die("HALT\n");
			}

		} else {
			PRINTK_DEBUG("No DIMM found in slot %u\n", i);

			/* If there's no DIMM in the slot, set dra value to 0xFF. */
			dra = 0xFF;
		}

		/* Set the value for DRAM Row Attribute Registers */
		pci_write_config8(NORTHBRIDGE, DRA + i, dra);
		PRINTK_DEBUG(" DRA 0x%02x has been set to 0x%02x\n", DRA + i, dra);
	}
}

static void set_dram_timing(void)
{
	/* Set the value for DRAM Timing Register */
	/* TODO: Configure the value according to SPD values. */
	pci_write_config32(NORTHBRIDGE, DRT, 0x00000010);
}

static void set_dram_buffer_strength(void)
{
	/* TODO: This needs to be set according to the DRAM tech
	 * (x8, x16, or x32). Argh, Intel provides no docs on this!
	 * Currently, it needs to be pulled from the output of
	 * lspci -xxx Rx92
	 */

	/* Set the value for System Memory Buffer Strength Control Registers */
	pci_write_config32(NORTHBRIDGE, BUFF_SC, 0xFC9B491B);
}

/*-----------------------------------------------------------------------------
Public interface.
-----------------------------------------------------------------------------*/

static void sdram_set_registers(void)
{
	printk(BIOS_DEBUG, "Setting initial SDRAM registers....\n");

	/* Calculate the value for DRT DRAM Timing Register */
	set_dram_timing();

	/* Setup System Memory Buffer Strength Control Registers */
	set_dram_buffer_strength();

	/* Setup DRAM Row Boundary Registers */
	set_dram_row_boundaries();

	/* Setup DRAM Row Attribute Registers */
	set_dram_row_attributes();

	printk(BIOS_DEBUG, "Initial SDRAM registers have been set.\n");
}

static void northbridge_set_registers(void)
{
	u16 value;
	int igd_memory = 0;

	printk(BIOS_DEBUG, "Setting initial Northbridge registers....\n");

	/* Set the value for Fixed DRAM Hole Control Register */
	pci_write_config8(NORTHBRIDGE, FDHC, 0x00);

	/* Set the value for Programmable Attribute Map Registers
	 * Ideally, this should be R/W for as many ranges as possible.
	 */
	pci_write_config8(NORTHBRIDGE, PAM0, 0x30);
	pci_write_config8(NORTHBRIDGE, PAM1, 0x33);
	pci_write_config8(NORTHBRIDGE, PAM2, 0x33);
	pci_write_config8(NORTHBRIDGE, PAM3, 0x33);
	pci_write_config8(NORTHBRIDGE, PAM4, 0x33);
	pci_write_config8(NORTHBRIDGE, PAM5, 0x33);
	pci_write_config8(NORTHBRIDGE, PAM6, 0x33);

	/* Set the value for System Management RAM Control Register */
	pci_write_config8(NORTHBRIDGE, SMRAM, 0x02);

	/* Set the value for GMCH Control Register #0 */
	pci_write_config16(NORTHBRIDGE, GCC0, 0xA072);

	/* Set the value for Aperture Base Configuration Register */
	pci_write_config32(NORTHBRIDGE, APBASE, 0x00000008);

	/* Set the value for GMCH Control Register #1 */
	switch (CONFIG_VIDEO_MB) {
	case 512: /* 512K of memory */
		igd_memory = 0x2;
		break;
	case 1: /* 1M of memory */
		igd_memory = 0x3;
		break;
	case 8: /* 8M of memory */
		igd_memory = 0x4;
		break;
	default: /* No memory */
		pci_write_config16(NORTHBRIDGE, GCC1, 0x0002);
		igd_memory = 0x0;
	}

	value = pci_read_config16(NORTHBRIDGE, GCC1);
	value |= igd_memory << 4;
	value |= 1; // 64MB aperture
	pci_write_config16(NORTHBRIDGE, GCC1, value);

	printk(BIOS_DEBUG, "Initial Northbridge registers have been set.\n");
}

static void sdram_initialize(void)
{
	u32 reg32;

	/* Setup Initial SDRAM Registers */
	sdram_set_registers();

	/* Wait until power/voltages and clocks are stable (200us). */
	udelay(200);

	/* Initialize each row of memory one at a time */
	initialize_dimm_rows();

	/* Enable Refresh */
	PRINTK_DEBUG("Enabling Refresh\n");
	reg32 = pci_read_config32(NORTHBRIDGE, DRC);
	reg32 |= (RAM_COMMAND_REFRESH << 8);
	pci_write_config32(NORTHBRIDGE, DRC, reg32);

	/* Set initialization complete */
	PRINTK_DEBUG("Setting initialization complete\n");
	reg32 = pci_read_config32(NORTHBRIDGE, DRC);
	reg32 |= (RAM_COMMAND_IC << 29);
	pci_write_config32(NORTHBRIDGE, DRC, reg32);

	/* Setup Initial Northbridge Registers */
	northbridge_set_registers();

	PRINTK_DEBUG("Northbridge following SDRAM init:\n");
	DUMPNORTH();
}