summaryrefslogtreecommitdiff
path: root/src/northbridge/via/vx900/early_smbus.c
blob: 0cf7427e5d5ad511cc842161692e5ce9615a0896 (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
/*
 * This file is part of the coreboot project.
 *
 * Copyright (C) 2011  Alexandru Gagniuc <mr.nuke.me@gmail.com>
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 */

#include <device/pci_ids.h>
#include "early_vx900.h"
#include <device/early_smbus.h>

#include <arch/io.h>
#include <console/console.h>

/**
 * \brief SMBUS IO ports in relation to the base IO port
 */
#define SMBHSTSTAT(base)		(u16)(u32)base + 0x0
#define SMBSLVSTAT(base)		(u16)(u32)base + 0x1
#define SMBHSTCTL(base)			(u16)(u32)base + 0x2
#define SMBHSTCMD(base)			(u16)(u32)base + 0x3
#define SMBXMITADD(base)		(u16)(u32)base + 0x4
#define SMBHSTDAT0(base)		(u16)(u32)base + 0x5
#define SMBHSTDAT1(base)		(u16)(u32)base + 0x6
#define SMBBLKDAT(base)			(u16)(u32)base + 0x7
#define SMBSLVCTL(base)			(u16)(u32)base + 0x8
#define SMBTRNSADD(base)		(u16)(u32)base + 0x9
#define SMBSLVDATA (base)		(u16)(u32)base + 0xa

static void smbus_delays(int delays)
{
	while (delays--)
		smbus_delay();
}

/**
 * Read a byte from the SMBus.
 *
 * @param smbus_dev The PCI address of the SMBus device .
 * @param addr The address location of the DIMM on the SMBus.
 * @param offset The offset the data is located at.
 */
u8 smbus_read_byte(u32 smbus_dev, u8 addr, u8 offset)
{
	u8 val;

	/* Initialize SMBUS sequence */
	smbus_reset(smbus_dev);
	/* Clear host data port. */
	outb(0x00, SMBHSTDAT0(smbus_dev));

	smbus_wait_until_ready(smbus_dev);
	smbus_delays(50);

	/* Actual addr to reg format. */
	addr = (addr << 1);
	addr |= 1;		/* read command */
	outb(addr, SMBXMITADD(smbus_dev));
	outb(offset, SMBHSTCMD(smbus_dev));
	/* Start transaction, byte data read. */
	outb(0x48, SMBHSTCTL(smbus_dev));
	smbus_wait_until_ready(smbus_dev);

	val = inb(SMBHSTDAT0(smbus_dev));
	return val;
}

void enable_smbus(void)
{
	pci_devfn_t dev;
	u8 reg8;
	u32 smbus_dev = (u32) SMBUS_IO_BASE;

	/* Locate the Power Management control */
	dev = pci_locate_device(PCI_ID(PCI_VENDOR_ID_VIA,
				       PCI_DEVICE_ID_VIA_VX900_LPC), 0);

	if (dev == PCI_DEV_INVALID) {
		die("Power Management Controller not found\n");
	}

	/*
	 * To use SMBus to manage devices on the system board, it is a must to
	 * enable SMBus function by setting
	 * PMU_RXD2[0] (SMBus Controller Enable) to 1.
	 * And set PMU_RXD0 and PMU_RXD1 (SMBus I/O Base) to an appropriate
	 * I/O port address, so that all registers in SMBus I/O port can be
	 * accessed.
	 */

	reg8 = pci_read_config8(dev, 0xd2);
	/* Enable SMBus controller */
	reg8 |= 1;
	/* Set SMBUS clock from 128k source */
	reg8 |= 1 << 2;
	pci_write_config8(dev, 0xd2, reg8);

	reg8 = pci_read_config8(dev, 0x94);
	/* SMBUS clock from divider of 14.318 MHz */
	reg8 &= ~(1 << 7);
	pci_write_config8(dev, 0x94, reg8);

	/* Set SMBus IO base */
	pci_write_config16(dev, 0xd0, SMBUS_IO_BASE);

	/*
	 * Initialize the SMBus sequence:
	 */
	/* Clear SMBus host status register */
	smbus_reset(smbus_dev);
	/* Clear SMBus host data 0 register */
	outb(0x00, SMBHSTDAT0(smbus_dev));

	/* Wait for SMBUS */
	smbus_wait_until_ready(smbus_dev);

}

static int spd_get_length(u8 spd_byte0)
{
	spd_byte0 &= 0xf;

	switch (spd_byte0) {
	case 0x3:
		return 256;
	case 0x2:
		return 176;
	case 0x1:
		return 128;
	default:
		break;
	}
	return 0;
}

void spd_read(u8 addr, spd_raw_data spd)
{
	u8 reg;
	int i, regs;
	u32 smbus_dev = SMBUS_IO_BASE;

	reg = smbus_read_byte(smbus_dev, addr, 2);
	if (reg != 0x0b) {
		printk(BIOS_DEBUG, "SMBUS device %x not a DDR3 module\n", addr);
		spd[2] = 0;
		return;
	}

	reg = smbus_read_byte(smbus_dev, addr, 0);
	if ((regs = spd_get_length(reg)) == 0) {
		printk(BIOS_INFO, "No DIMM present at %x\n", addr);
		spd[2] = 0;
		return;
	}

	for (i = 0; i < regs; i++)
		spd[i] = smbus_read_byte(smbus_dev, addr, i);
}

void dump_spd_data(spd_raw_data spd)
{
	int len, i;
	u8 reg;

	if ((len = spd_get_length(spd[0])) == 0) {
		printk(BIOS_DEBUG, "Invalid SPD\n");
		return;
	}

	/*
	 * I originally saw this way to present SPD data in code from VIA. I
	 * really liked the idea, so here it goes.
	 */
	printk(BIOS_DEBUG, "     00 01 02 03 04 05 06 07 07 09 0A 0B 0C 0D 0E 0F\n");
	printk(BIOS_DEBUG, "---+------------------------------------------------");
	for (i = 0; i < len; i++) {
		reg = spd[i];
		if ((i & 0x0f) == 0)
			printk(BIOS_DEBUG, "\n%.2x |", i);
		printk(BIOS_DEBUG, " %.2x", reg);
	}
	printk(BIOS_DEBUG, "\n");
}